These helpers are extent map specific, move them to extent_map.c.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This is a prepare work for the following extent map selftest, which
runs tests against em merge logic.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This fixes a corner case that is caused by a race of dio write vs dio
read/write.

Here is how the race could happen.

Suppose that no extent map has been loaded into memory yet.
There is a file extent [0, 32K), two jobs are running concurrently
against it, t1 is doing dio write to [8K, 32K) and t2 is doing dio
read from [0, 4K) or [4K, 8K).

t1 goes ahead of t2 and splits em [0, 32K) to em [0K, 8K) and [8K 32K).

------------------------------------------------------
             t1                                t2
      btrfs_get_blocks_direct()         btrfs_get_blocks_direct()
       -> btrfs_get_extent()              -> btrfs_get_extent()
           -> lookup_extent_mapping()
           -> add_extent_mapping()            -> lookup_extent_mapping()
              # load [0, 32K)
       -> btrfs_new_extent_direct()
           -> btrfs_drop_extent_cache()
              # split [0, 32K) and
	      # drop [8K, 32K)
           -> add_extent_mapping()
              # add [8K, 32K)
                                              -> add_extent_mapping()
                                                 # handle -EEXIST when adding
                                                 # [0, 32K)
------------------------------------------------------
About how t2(dio read/write) runs into -EEXIST:

a) add_extent_mapping() gets -EEXIST for adding em [0, 32k),

b) search_extent_mapping() then returns [0, 8k) as the existing em,
   even though start == existing->start, em is [0, 32k) so that
   extent_map_end(em) > extent_map_end(existing), i.e. 32k > 8k,

c) then it goes thru merge_extent_mapping() which tries to add a [8k, 8k)
   (with a length 0) and returns -EEXIST as [8k, 32k) is already in tree,

d) so btrfs_get_extent() ends up returning -EEXIST to dio read/write,
   which is confusing applications.

Here I conclude all the possible situations,
1) start < existing->start

            +-----------+em+-----------+
+--prev---+ |     +-------------+      |
|         | |     |             |      |
+---------+ +     +---+existing++      ++
                +
                |
                +
             start

2) start == existing->start

      +------------em------------+
      |     +-------------+      |
      |     |             |      |
      +     +----existing-+      +
            |
            |
            +
         start

3) start > existing->start && start < (existing->start + existing->len)

      +------------em------------+
      |     +-------------+      |
      |     |             |      |
      +     +----existing-+      +
               |
               |
               +
             start

4) start >= (existing->start + existing->len)

+-----------+em+-----------+
|     +-------------+      | +--next---+
|     |             |      | |         |
+     +---+existing++      + +---------+
                      +
                      |
                      +
                   start

As we can see, it turns out that if start is within existing em (front
inclusive), then the existing em should be returned as is, otherwise,
we try our best to merge candidate em with sibling ems to form a
larger em (in order to reduce the total number of em).
Reported-by: David Vallender <david.vallender@landmark.co.uk>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

%block_len could be checked on deciding if two em are mergeable.

merge_extent_mapping() has only added the front pad if the front part
of em gets truncated, but it's possible that the end part gets
truncated.

For both compressed extent and inline extent, em->block_len is not
adjusted accordingly, and for regular extent, em->block_len always
equals to em->len, hence this sets em->block_len with em->len.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The reada_lock in struct btrfs_device was only initialised, and not
actually used.  That's good because there's another lock also called
reada_lock in the btrfs_fs_info that was quite heavily used.  Remove
this one.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Before rbio_orig_end_io() goes to free rbio, rbio may get merged with
more bios from other rbios and rbio->bio_list becomes non-empty,
in that case, these newly merged bios don't end properly.

Once unlock_stripe() is done, rbio->bio_list will not be updated any
more and we can call bio_endio() on all queued bios.

It should only happen in error-out cases, the normal path of recover
and full stripe write have already set RBIO_RMW_LOCKED_BIT to disable
merge before doing IO, so rbio_orig_end_io() called by them doesn't
have the above issue.
Reported-by: Jérôme Carretero <cJ-ko@zougloub.eu>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Since raid6 recover tries all possible combinations of failed stripes,

- when raid6 rebuild algorithm is used, i.e. raid6_datap_recov() and
  raid6_2data_recov(), it may change the in-memory content of failed
  stripes, if such a raid bio is cached, a later raid write rmw or recover
  can steal @stripe_pages from it instead of reading from disks, such that
  it carries the wrong content to do write rmw or recovery and ends up
  with corruption or recovery failures.

- when raid5 rebuild algorithm is used, i.e. xor, raid bio can be cached
  because the only failed stripe which contains @rbio->bio_pages gets
  modified, others remain the same so that their in-memory content is
  consistent with their on-disk content.

This adds a check to skip caching rbio if using raid6 recover.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Bio iterated by set_bio_pages_uptodate() is raid56 internal one, so it
will never be a BIO_CLONED bio, and since this is called by end_io
functions, bio->bi_iter.bi_size is zero, we mustn't use
bio_for_each_segment() as that is a no-op if bi_size is zero.

Fixes: 6592e58c ("Btrfs: fix write corruption due to bio cloning on raid5/6")
Cc: <stable@vger.kernel.org> # v4.12-rc6+
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

There is no function named btrfs_get_inode_index_count.
Explanation for magic number index_cnt=2 in btrfs_new_inode() is
actually located in btrfs_set_inode_index_count().

So replace 'btrfs_get_inode_index_count' in the comment by
'btrfs_set_inode_index_count'.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>

It's not used outside of extent-tree so there is no reason to not be
static.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

We call btrfs_free_stale_device() only when we alloc a new struct
btrfs_device (ret=1), so move it closer to where we alloc the new
device. Also drop the comments.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

I've noticed that the updated item checker stack consumption increased
dramatically in 542f5385e20cf97447 ("btrfs: tree-checker: Add checker
for dir item")

tree-checker.c:check_leaf                    +552 (176 -> 728)

The array is 255 bytes long, dynamic allocation would slow down the
sanity checks so it's more reasonable to keep it on-stack. Moving the
variable to the scope of use reduces the stack usage again

tree-checker.c:check_leaf                    -264 (728 -> 464)
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

gcc-8 reports:

fs/btrfs/ioctl.c: In function 'btrfs_ioctl':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified
bound 1024 equals destination size [-Wstringop-truncation]

We need one less byte or call strlcpy() to make it a nul-terminated
string. This is done on the next line anyway, but we want to avoid the
warning.
Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>

It appears from the original commit [1] that there isn't any design
specific reason not to fail the mount instead of just warning. This
patch will change it to fail.

[1]
 commit 319e4d06
    btrfs: Enhance super validation check

Fixes: 319e4d06 ("btrfs: Enhance super validation check")
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The UUID change by btrfstune sets SUPER_FLAG_CHANGING_FSID and resets it
only when changing fsid is complete. Its not a good idea to mount the
device anything in between, reading metadata blocks would fail with UUID
mismatch.

This patch doesn't add SUPER_FLAG_CHANGING_FSID into
BTRFS_SUPER_FLAG_SUPP list, so mount will fail (along with the fix in
the next patch) when SUPER_FLAG_CHANGING_FSID is set.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs-progs uses super flag bit BTRFS_SUPER_FLAG_METADUMP_V2 (1ULL << 34).
So just define that in kernel so that we know its been used.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

We've avoided data losing raid profile when doing balance, but it
turns out that deleting a device could also result in the same
problem.

Say we have 3 disks, and they're created with '-d raid1' profile.

- We have chunk P (the only data chunk on the empty btrfs).

- Suppose that chunk P's two raid1 copies reside in disk A and disk B.

- Now, 'btrfs device remove disk B'
         btrfs_rm_device()
	   -> btrfs_shrink_device()
	      -> btrfs_relocate_chunk() #relocate any chunk on disk B
	      	 			 to other places.

- Chunk P will be removed and a new chunk will be created to hold
  those data, but as chunk P is the only one holding raid1 profile,
  after it goes away, the new chunk will be created as single profile
  which is our default profile.

This fixes the problem by creating an empty data chunk before
relocating the data chunk.

Metadata/System chunk are supposed to have non-zero bytes all the time
so their raid profile is preserved.
Reported-by: James Alandt <James.Alandt@wdc.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

If we do a buffered write after a zero range operation that has an
unaligned (with the filesystem's sector size) end which also falls within
an unwritten (prealloc) extent that is currently beyond the inode's
i_size, and the zero range operation has the flag FALLOC_FL_KEEP_SIZE,
we end up leaking data and metadata space. This happens because when
zeroing a range we call btrfs_truncate_block(), which does delalloc
(loads the page and partially zeroes its content), and in the buffered
write path we only clear existing delalloc space reservation for the
range we are writing into if that range starts at an offset smaller then
the inode's i_size, which makes sense since we can not have delalloc
extents beyond the i_size, only unwritten extents are allowed.

Example reproducer:

 $ mkfs.btrfs -f /dev/sdb
 $ mount /dev/sdb /mnt
 $ xfs_io -f -c "falloc -k 428K 4K" /mnt/foobar
 $ xfs_io -c "fzero -k 0 430K" /mnt/foobar
 $ xfs_io -c "pwrite -S 0xaa 428K 4K" /mnt/foobar
 $ umount /mnt

After the unmount we get the metadata and data space leaks reported in
dmesg/syslog:

 [95794.602253] ------------[ cut here ]------------
 [95794.603322] WARNING: CPU: 0 PID: 31496 at fs/btrfs/inode.c:9561 btrfs_destroy_inode+0x4e/0x206 [btrfs]
 [95794.605167] Modules linked in: btrfs xfs ppdev ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper parport_pc psmouse sg i2c_piix4 parport i2c_core evdev pcspkr button serio_raw sunrpc loop autofs4 ext4 crc16 mbcache jbd2 zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod sd_mod virtio_scsi ata_generic crc32c_intel ata_piix floppy virtio_pci virtio_ring virtio libata scsi_mod e1000 [last unloaded: btrfs]
 [95794.613000] CPU: 0 PID: 31496 Comm: umount Tainted: G        W       4.14.0-rc6-btrfs-next-54+ #1
 [95794.614448] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
 [95794.615972] task: ffff880075aa0240 task.stack: ffffc90001734000
 [95794.617114] RIP: 0010:btrfs_destroy_inode+0x4e/0x206 [btrfs]
 [95794.618001] RSP: 0018:ffffc90001737d00 EFLAGS: 00010202
 [95794.618721] RAX: 0000000000000000 RBX: ffff880070fa1418 RCX: ffffc90001737c7c
 [95794.619645] RDX: 0000000175aa0240 RSI: 0000000000000001 RDI: ffff880070fa1418
 [95794.620711] RBP: ffffc90001737d38 R08: 0000000000000000 R09: 0000000000000000
 [95794.621932] R10: ffffc90001737c48 R11: ffff88007123e158 R12: ffff880075b6a000
 [95794.623124] R13: ffff88006145c000 R14: ffff880070fa1418 R15: ffff880070c3b4a0
 [95794.624188] FS:  00007fa6793c92c0(0000) GS:ffff88023fc00000(0000) knlGS:0000000000000000
 [95794.625578] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [95794.626522] CR2: 000056338670d048 CR3: 00000000610dc005 CR4: 00000000001606f0
 [95794.627647] Call Trace:
 [95794.628128]  destroy_inode+0x3d/0x55
 [95794.628573]  evict+0x177/0x17e
 [95794.629010]  dispose_list+0x50/0x71
 [95794.629478]  evict_inodes+0x132/0x141
 [95794.630289]  generic_shutdown_super+0x3f/0x10b
 [95794.630864]  kill_anon_super+0x12/0x1c
 [95794.631383]  btrfs_kill_super+0x16/0x21 [btrfs]
 [95794.631930]  deactivate_locked_super+0x30/0x68
 [95794.632539]  deactivate_super+0x36/0x39
 [95794.633200]  cleanup_mnt+0x49/0x67
 [95794.633818]  __cleanup_mnt+0x12/0x14
 [95794.634416]  task_work_run+0x82/0xa6
 [95794.634902]  prepare_exit_to_usermode+0xe1/0x10c
 [95794.635525]  syscall_return_slowpath+0x18c/0x1af
 [95794.636122]  entry_SYSCALL_64_fastpath+0xab/0xad
 [95794.636834] RIP: 0033:0x7fa678cb99a7
 [95794.637370] RSP: 002b:00007ffccf0aaed8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
 [95794.638672] RAX: 0000000000000000 RBX: 0000563386706030 RCX: 00007fa678cb99a7
 [95794.639596] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000056338670ca90
 [95794.640703] RBP: 000056338670ca90 R08: 000056338670c740 R09: 0000000000000015
 [95794.641773] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007fa6791bae64
 [95794.643150] R13: 0000000000000000 R14: 0000563386706210 R15: 00007ffccf0ab160
 [95794.644249] Code: ff 4c 8b a8 80 06 00 00 48 8b 87 c0 01 00 00 48 85 c0 74 02 0f ff 48 83 bb e0 02 00 00 00 74 02 0f ff 83 bb 3c ff ff ff 00 74 02 <0f> ff 83 bb 40 ff ff ff 00 74 02 0f ff 48 83 bb f8 fe ff ff 00
 [95794.646929] ---[ end trace e95877675c6ec007 ]---
 [95794.647751] ------------[ cut here ]------------
 [95794.648509] WARNING: CPU: 0 PID: 31496 at fs/btrfs/inode.c:9562 btrfs_destroy_inode+0x59/0x206 [btrfs]
 [95794.649842] Modules linked in: btrfs xfs ppdev ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper parport_pc psmouse sg i2c_piix4 parport i2c_core evdev pcspkr button serio_raw sunrpc loop autofs4 ext4 crc16 mbcache jbd2 zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod sd_mod virtio_scsi ata_generic crc32c_intel ata_piix floppy virtio_pci virtio_ring virtio libata scsi_mod e1000 [last unloaded: btrfs]
 [95794.654659] CPU: 0 PID: 31496 Comm: umount Tainted: G        W       4.14.0-rc6-btrfs-next-54+ #1
 [95794.655894] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
 [95794.657546] task: ffff880075aa0240 task.stack: ffffc90001734000
 [95794.658433] RIP: 0010:btrfs_destroy_inode+0x59/0x206 [btrfs]
 [95794.659279] RSP: 0018:ffffc90001737d00 EFLAGS: 00010202
 [95794.660054] RAX: 0000000000000000 RBX: ffff880070fa1418 RCX: ffffc90001737c7c
 [95794.660753] RDX: 0000000175aa0240 RSI: 0000000000000001 RDI: ffff880070fa1418
 [95794.661513] RBP: ffffc90001737d38 R08: 0000000000000000 R09: 0000000000000000
 [95794.662289] R10: ffffc90001737c48 R11: ffff88007123e158 R12: ffff880075b6a000
 [95794.663393] R13: ffff88006145c000 R14: ffff880070fa1418 R15: ffff880070c3b4a0
 [95794.664342] FS:  00007fa6793c92c0(0000) GS:ffff88023fc00000(0000) knlGS:0000000000000000
 [95794.665673] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [95794.666593] CR2: 000056338670d048 CR3: 00000000610dc005 CR4: 00000000001606f0
 [95794.667629] Call Trace:
 [95794.668065]  destroy_inode+0x3d/0x55
 [95794.668637]  evict+0x177/0x17e
 [95794.669179]  dispose_list+0x50/0x71
 [95794.669830]  evict_inodes+0x132/0x141
 [95794.670416]  generic_shutdown_super+0x3f/0x10b
 [95794.671103]  kill_anon_super+0x12/0x1c
 [95794.671786]  btrfs_kill_super+0x16/0x21 [btrfs]
 [95794.672552]  deactivate_locked_super+0x30/0x68
 [95794.673393]  deactivate_super+0x36/0x39
 [95794.674107]  cleanup_mnt+0x49/0x67
 [95794.674706]  __cleanup_mnt+0x12/0x14
 [95794.675279]  task_work_run+0x82/0xa6
 [95794.675795]  prepare_exit_to_usermode+0xe1/0x10c
 [95794.676507]  syscall_return_slowpath+0x18c/0x1af
 [95794.677275]  entry_SYSCALL_64_fastpath+0xab/0xad
 [95794.678006] RIP: 0033:0x7fa678cb99a7
 [95794.678600] RSP: 002b:00007ffccf0aaed8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
 [95794.679739] RAX: 0000000000000000 RBX: 0000563386706030 RCX: 00007fa678cb99a7
 [95794.680779] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000056338670ca90
 [95794.681837] RBP: 000056338670ca90 R08: 000056338670c740 R09: 0000000000000015
 [95794.682867] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007fa6791bae64
 [95794.683891] R13: 0000000000000000 R14: 0000563386706210 R15: 00007ffccf0ab160
 [95794.684843] Code: c0 01 00 00 48 85 c0 74 02 0f ff 48 83 bb e0 02 00 00 00 74 02 0f ff 83 bb 3c ff ff ff 00 74 02 0f ff 83 bb 40 ff ff ff 00 74 02 <0f> ff 48 83 bb f8 fe ff ff 00 74 02 0f ff 48 83 bb 00 ff ff ff
 [95794.687156] ---[ end trace e95877675c6ec008 ]---
 [95794.687876] ------------[ cut here ]------------
 [95794.688579] WARNING: CPU: 0 PID: 31496 at fs/btrfs/inode.c:9565 btrfs_destroy_inode+0x7d/0x206 [btrfs]
 [95794.689735] Modules linked in: btrfs xfs ppdev ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper parport_pc psmouse sg i2c_piix4 parport i2c_core evdev pcspkr button serio_raw sunrpc loop autofs4 ext4 crc16 mbcache jbd2 zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod sd_mod virtio_scsi ata_generic crc32c_intel ata_piix floppy virtio_pci virtio_ring virtio libata scsi_mod e1000 [last unloaded: btrfs]
 [95794.695015] CPU: 0 PID: 31496 Comm: umount Tainted: G        W       4.14.0-rc6-btrfs-next-54+ #1
 [95794.696396] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
 [95794.697956] task: ffff880075aa0240 task.stack: ffffc90001734000
 [95794.698925] RIP: 0010:btrfs_destroy_inode+0x7d/0x206 [btrfs]
 [95794.699763] RSP: 0018:ffffc90001737d00 EFLAGS: 00010206
 [95794.700434] RAX: 0000000000000000 RBX: ffff880070fa1418 RCX: ffffc90001737c7c
 [95794.701445] RDX: 0000000175aa0240 RSI: 0000000000000001 RDI: ffff880070fa1418
 [95794.702448] RBP: ffffc90001737d38 R08: 0000000000000000 R09: 0000000000000000
 [95794.703557] R10: ffffc90001737c48 R11: ffff88007123e158 R12: ffff880075b6a000
 [95794.704441] R13: ffff88006145c000 R14: ffff880070fa1418 R15: ffff880070c3b4a0
 [95794.705270] FS:  00007fa6793c92c0(0000) GS:ffff88023fc00000(0000) knlGS:0000000000000000
 [95794.706341] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [95794.707001] CR2: 000056338670d048 CR3: 00000000610dc005 CR4: 00000000001606f0
 [95794.708030] Call Trace:
 [95794.708466]  destroy_inode+0x3d/0x55
 [95794.709071]  evict+0x177/0x17e
 [95794.709497]  dispose_list+0x50/0x71
 [95794.709973]  evict_inodes+0x132/0x141
 [95794.710564]  generic_shutdown_super+0x3f/0x10b
 [95794.711200]  kill_anon_super+0x12/0x1c
 [95794.711633]  btrfs_kill_super+0x16/0x21 [btrfs]
 [95794.712139]  deactivate_locked_super+0x30/0x68
 [95794.712608]  deactivate_super+0x36/0x39
 [95794.713093]  cleanup_mnt+0x49/0x67
 [95794.713514]  __cleanup_mnt+0x12/0x14
 [95794.713933]  task_work_run+0x82/0xa6
 [95794.714543]  prepare_exit_to_usermode+0xe1/0x10c
 [95794.715247]  syscall_return_slowpath+0x18c/0x1af
 [95794.715952]  entry_SYSCALL_64_fastpath+0xab/0xad
 [95794.716653] RIP: 0033:0x7fa678cb99a7
 [95794.721100] RSP: 002b:00007ffccf0aaed8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
 [95794.722052] RAX: 0000000000000000 RBX: 0000563386706030 RCX: 00007fa678cb99a7
 [95794.722856] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000056338670ca90
 [95794.723698] RBP: 000056338670ca90 R08: 000056338670c740 R09: 0000000000000015
 [95794.724736] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007fa6791bae64
 [95794.725928] R13: 0000000000000000 R14: 0000563386706210 R15: 00007ffccf0ab160
 [95794.726728] Code: 40 ff ff ff 00 74 02 0f ff 48 83 bb f8 fe ff ff 00 74 02 0f ff 48 83 bb 00 ff ff ff 00 74 02 0f ff 48 83 bb 30 ff ff ff 00 74 02 <0f> ff 48 83 bb 08 ff ff ff 00 74 02 0f ff 4d 85 e4 0f 84 52 01
 [95794.729203] ---[ end trace e95877675c6ec009 ]---
 [95794.841054] ------------[ cut here ]------------
 [95794.841829] WARNING: CPU: 0 PID: 31496 at fs/btrfs/extent-tree.c:5831 btrfs_free_block_groups+0x235/0x36a [btrfs]
 [95794.843425] Modules linked in: btrfs xfs ppdev ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper parport_pc psmouse sg i2c_piix4 parport i2c_core evdev pcspkr button serio_raw sunrpc loop autofs4 ext4 crc16 mbcache jbd2 zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod sd_mod virtio_scsi ata_generic crc32c_intel ata_piix floppy virtio_pci virtio_ring virtio libata scsi_mod e1000 [last unloaded: btrfs]
 [95794.850658] CPU: 0 PID: 31496 Comm: umount Tainted: G        W       4.14.0-rc6-btrfs-next-54+ #1
 [95794.852590] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
 [95794.854752] task: ffff880075aa0240 task.stack: ffffc90001734000
 [95794.855812] RIP: 0010:btrfs_free_block_groups+0x235/0x36a [btrfs]
 [95794.856811] RSP: 0018:ffffc90001737d70 EFLAGS: 00010206
 [95794.857805] RAX: 0000000080000000 RBX: ffff88006145c000 RCX: 0000000000000001
 [95794.859014] RDX: 00000001810af668 RSI: 0000000000000002 RDI: 00000000ffffffff
 [95794.860270] RBP: ffffc90001737d98 R08: 0000000000000000 R09: ffffffff817e22b9
 [95794.861525] R10: ffffc90001737c80 R11: 00000000000337fd R12: 0000000000000000
 [95794.862700] R13: ffff88006145c0c0 R14: ffff88021b61a800 R15: ffff88006145c100
 [95794.863810] FS:  00007fa6793c92c0(0000) GS:ffff88023fc00000(0000) knlGS:0000000000000000
 [95794.865149] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [95794.866099] CR2: 000056338670d048 CR3: 00000000610dc005 CR4: 00000000001606f0
 [95794.867198] Call Trace:
 [95794.867626]  close_ctree+0x1db/0x2b8 [btrfs]
 [95794.868188]  ? evict_inodes+0x132/0x141
 [95794.869037]  btrfs_put_super+0x15/0x17 [btrfs]
 [95794.870400]  generic_shutdown_super+0x6a/0x10b
 [95794.871262]  kill_anon_super+0x12/0x1c
 [95794.872046]  btrfs_kill_super+0x16/0x21 [btrfs]
 [95794.872746]  deactivate_locked_super+0x30/0x68
 [95794.873687]  deactivate_super+0x36/0x39
 [95794.874639]  cleanup_mnt+0x49/0x67
 [95794.875504]  __cleanup_mnt+0x12/0x14
 [95794.876126]  task_work_run+0x82/0xa6
 [95794.876788]  prepare_exit_to_usermode+0xe1/0x10c
 [95794.877777]  syscall_return_slowpath+0x18c/0x1af
 [95794.878381]  entry_SYSCALL_64_fastpath+0xab/0xad
 [95794.878888] RIP: 0033:0x7fa678cb99a7
 [95794.879307] RSP: 002b:00007ffccf0aaed8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
 [95794.880204] RAX: 0000000000000000 RBX: 0000563386706030 RCX: 00007fa678cb99a7
 [95794.881640] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000056338670ca90
 [95794.882690] RBP: 000056338670ca90 R08: 000056338670c740 R09: 0000000000000015
 [95794.883538] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007fa6791bae64
 [95794.884562] R13: 0000000000000000 R14: 0000563386706210 R15: 00007ffccf0ab160
 [95794.885664] Code: 89 ef e8 07 ec 32 e1 e8 9d c0 ea e0 48 8d b3 28 02 00 00 48 83 c9 ff 31 d2 48 89 df e8 29 c5 ff ff 48 83 bb 80 02 00 00 00 74 02 <0f> ff 48 83 bb 88 02 00 00 00 74 02 0f ff 48 83 bb d8 02 00 00
 [95794.887980] ---[ end trace e95877675c6ec00a ]---
 [95794.888739] ------------[ cut here ]------------
 [95794.889405] WARNING: CPU: 0 PID: 31496 at fs/btrfs/extent-tree.c:5832 btrfs_free_block_groups+0x241/0x36a [btrfs]
 [95794.891020] Modules linked in: btrfs xfs ppdev ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper parport_pc psmouse sg i2c_piix4 parport i2c_core evdev pcspkr button serio_raw sunrpc loop autofs4 ext4 crc16 mbcache jbd2 zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod sd_mod virtio_scsi ata_generic crc32c_intel ata_piix floppy virtio_pci virtio_ring virtio libata scsi_mod e1000 [last unloaded: btrfs]
 [95794.897551] CPU: 0 PID: 31496 Comm: umount Tainted: G        W       4.14.0-rc6-btrfs-next-54+ #1
 [95794.898509] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
 [95794.899685] task: ffff880075aa0240 task.stack: ffffc90001734000
 [95794.900592] RIP: 0010:btrfs_free_block_groups+0x241/0x36a [btrfs]
 [95794.901387] RSP: 0018:ffffc90001737d70 EFLAGS: 00010206
 [95794.902300] RAX: 0000000080000000 RBX: ffff88006145c000 RCX: 0000000000000001
 [95794.903260] RDX: 00000001810af668 RSI: 0000000000000002 RDI: 00000000ffffffff
 [95794.904332] RBP: ffffc90001737d98 R08: 0000000000000000 R09: ffffffff817e22b9
 [95794.905300] R10: ffffc90001737c80 R11: 00000000000337fd R12: 0000000000000000
 [95794.906439] R13: ffff88006145c0c0 R14: ffff88021b61a800 R15: ffff88006145c100
 [95794.907459] FS:  00007fa6793c92c0(0000) GS:ffff88023fc00000(0000) knlGS:0000000000000000
 [95794.908625] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [95794.909511] CR2: 000056338670d048 CR3: 00000000610dc005 CR4: 00000000001606f0
 [95794.910630] Call Trace:
 [95794.911153]  close_ctree+0x1db/0x2b8 [btrfs]
 [95794.911837]  ? evict_inodes+0x132/0x141
 [95794.912344]  btrfs_put_super+0x15/0x17 [btrfs]
 [95794.912975]  generic_shutdown_super+0x6a/0x10b
 [95794.913788]  kill_anon_super+0x12/0x1c
 [95794.914424]  btrfs_kill_super+0x16/0x21 [btrfs]
 [95794.915142]  deactivate_locked_super+0x30/0x68
 [95794.915831]  deactivate_super+0x36/0x39
 [95794.916433]  cleanup_mnt+0x49/0x67
 [95794.917045]  __cleanup_mnt+0x12/0x14
 [95794.917665]  task_work_run+0x82/0xa6
 [95794.918309]  prepare_exit_to_usermode+0xe1/0x10c
 [95794.919021]  syscall_return_slowpath+0x18c/0x1af
 [95794.919722]  entry_SYSCALL_64_fastpath+0xab/0xad
 [95794.920426] RIP: 0033:0x7fa678cb99a7
 [95794.921039] RSP: 002b:00007ffccf0aaed8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
 [95794.922303] RAX: 0000000000000000 RBX: 0000563386706030 RCX: 00007fa678cb99a7
 [95794.923335] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000056338670ca90
 [95794.924364] RBP: 000056338670ca90 R08: 000056338670c740 R09: 0000000000000015
 [95794.925435] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007fa6791bae64
 [95794.926533] R13: 0000000000000000 R14: 0000563386706210 R15: 00007ffccf0ab160
 [95794.927557] Code: 48 8d b3 28 02 00 00 48 83 c9 ff 31 d2 48 89 df e8 29 c5 ff ff 48 83 bb 80 02 00 00 00 74 02 0f ff 48 83 bb 88 02 00 00 00 74 02 <0f> ff 48 83 bb d8 02 00 00 00 74 02 0f ff 48 83 bb e0 02 00 00
 [95794.930166] ---[ end trace e95877675c6ec00b ]---
 [95794.930961] ------------[ cut here ]------------
 [95794.931727] WARNING: CPU: 0 PID: 31496 at fs/btrfs/extent-tree.c:9953 btrfs_free_block_groups+0x2bc/0x36a [btrfs]
 [95794.932729] Modules linked in: btrfs xfs ppdev ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper parport_pc psmouse sg i2c_piix4 parport i2c_core evdev pcspkr button serio_raw sunrpc loop autofs4 ext4 crc16 mbcache jbd2 zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod sd_mod virtio_scsi ata_generic crc32c_intel ata_piix floppy virtio_pci virtio_ring virtio libata scsi_mod e1000 [last unloaded: btrfs]
 [95794.938394] CPU: 0 PID: 31496 Comm: umount Tainted: G        W       4.14.0-rc6-btrfs-next-54+ #1
 [95794.939842] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
 [95794.941455] task: ffff880075aa0240 task.stack: ffffc90001734000
 [95794.942336] RIP: 0010:btrfs_free_block_groups+0x2bc/0x36a [btrfs]
 [95794.943268] RSP: 0018:ffffc90001737d70 EFLAGS: 00010206
 [95794.944127] RAX: ffff8802004fd0e8 RBX: ffff88006145c000 RCX: 0000000000000001
 [95794.945211] RDX: 00000001810af668 RSI: 0000000000000002 RDI: 00000000ffffffff
 [95794.946316] RBP: ffffc90001737d98 R08: 0000000000000000 R09: ffffffff817e22b9
 [95794.947271] R10: ffffc90001737c80 R11: 00000000000337fd R12: ffff8802004fd0e8
 [95794.948219] R13: ffff88006145c0c0 R14: ffff88006145e598 R15: ffff88006145c100
 [95794.949193] FS:  00007fa6793c92c0(0000) GS:ffff88023fc00000(0000) knlGS:0000000000000000
 [95794.950495] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [95794.951338] CR2: 000056338670d048 CR3: 00000000610dc005 CR4: 00000000001606f0
 [95794.952361] Call Trace:
 [95794.952811]  close_ctree+0x1db/0x2b8 [btrfs]
 [95794.953522]  ? evict_inodes+0x132/0x141
 [95794.954543]  btrfs_put_super+0x15/0x17 [btrfs]
 [95794.955231]  generic_shutdown_super+0x6a/0x10b
 [95794.955916]  kill_anon_super+0x12/0x1c
 [95794.956414]  btrfs_kill_super+0x16/0x21 [btrfs]
 [95794.956953]  deactivate_locked_super+0x30/0x68
 [95794.957635]  deactivate_super+0x36/0x39
 [95794.958256]  cleanup_mnt+0x49/0x67
 [95794.958701]  __cleanup_mnt+0x12/0x14
 [95794.959181]  task_work_run+0x82/0xa6
 [95794.959635]  prepare_exit_to_usermode+0xe1/0x10c
 [95794.960182]  syscall_return_slowpath+0x18c/0x1af
 [95794.960731]  entry_SYSCALL_64_fastpath+0xab/0xad
 [95794.961438] RIP: 0033:0x7fa678cb99a7
 [95794.961990] RSP: 002b:00007ffccf0aaed8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
 [95794.963111] RAX: 0000000000000000 RBX: 0000563386706030 RCX: 00007fa678cb99a7
 [95794.963975] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000056338670ca90
 [95794.964680] RBP: 000056338670ca90 R08: 000056338670c740 R09: 0000000000000015
 [95794.965763] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007fa6791bae64
 [95794.966868] R13: 0000000000000000 R14: 0000563386706210 R15: 00007ffccf0ab160
 [95794.967800] Code: 00 00 00 4c 8b a3 98 25 00 00 49 83 bc 24 60 ff ff ff 00 75 16 49 83 bc 24 68 ff ff ff 00 75 0b 49 83 bc 24 70 ff ff ff 00 74 16 <0f> ff 49 8d b4 24 18 ff ff ff 31 c9 31 d2 48 89 df e8 93 7a ff
 [95794.970629] ---[ end trace e95877675c6ec00c ]---
 [95794.971451] BTRFS info (device sdi): space_info 1 has 7680000 free, is not full
 [95794.972351] BTRFS info (device sdi): space_info total=8388608, used=704512, pinned=0, reserved=0, may_use=4096, readonly=0
 [95794.973595] ------------[ cut here ]------------
 [95794.974353] WARNING: CPU: 0 PID: 31496 at fs/btrfs/extent-tree.c:9953 btrfs_free_block_groups+0x2bc/0x36a [btrfs]
 [95794.980163] Modules linked in: btrfs xfs ppdev ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper parport_pc psmouse sg i2c_piix4 parport i2c_core evdev pcspkr button serio_raw sunrpc loop autofs4 ext4 crc16 mbcache jbd2 zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod sd_mod virtio_scsi ata_generic crc32c_intel ata_piix floppy virtio_pci virtio_ring virtio libata scsi_mod e1000 [last unloaded: btrfs]
 [95794.986461] CPU: 0 PID: 31496 Comm: umount Tainted: G        W       4.14.0-rc6-btrfs-next-54+ #1
 [95794.987591] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
 [95794.988929] task: ffff880075aa0240 task.stack: ffffc90001734000
 [95794.989922] RIP: 0010:btrfs_free_block_groups+0x2bc/0x36a [btrfs]
 [95794.990715] RSP: 0018:ffffc90001737d70 EFLAGS: 00010206
 [95794.991431] RAX: ffff88020f6e70e8 RBX: ffff88006145c000 RCX: ffffffff8115a906
 [95794.992455] RDX: ffffffff8115a902 RSI: ffff880075aa0b40 RDI: ffff880075aa0b40
 [95794.993535] RBP: ffffc90001737d98 R08: 0000000000000020 R09: fffffffffffffff7
 [95794.994573] R10: 00000000ffffffc4 R11: ffff8800633b1bc0 R12: ffff88020f6e70e8
 [95794.996250] R13: 0000000000000038 R14: ffff88006145e598 R15: 0000000000000000
 [95794.997233] FS:  00007fa6793c92c0(0000) GS:ffff88023fc00000(0000) knlGS:0000000000000000
 [95794.998592] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [95794.999484] CR2: 000056338670d048 CR3: 00000000610dc005 CR4: 00000000001606f0
 [95795.000542] Call Trace:
 [95795.001138]  close_ctree+0x1db/0x2b8 [btrfs]
 [95795.001885]  ? evict_inodes+0x132/0x141
 [95795.002407]  btrfs_put_super+0x15/0x17 [btrfs]
 [95795.003093]  generic_shutdown_super+0x6a/0x10b
 [95795.003720]  kill_anon_super+0x12/0x1c
 [95795.004353]  btrfs_kill_super+0x16/0x21 [btrfs]
 [95795.005095]  deactivate_locked_super+0x30/0x68
 [95795.005716]  deactivate_super+0x36/0x39
 [95795.006388]  cleanup_mnt+0x49/0x67
 [95795.006939]  __cleanup_mnt+0x12/0x14
 [95795.007512]  task_work_run+0x82/0xa6
 [95795.008124]  prepare_exit_to_usermode+0xe1/0x10c
 [95795.008994]  syscall_return_slowpath+0x18c/0x1af
 [95795.009831]  entry_SYSCALL_64_fastpath+0xab/0xad
 [95795.010610] RIP: 0033:0x7fa678cb99a7
 [95795.011193] RSP: 002b:00007ffccf0aaed8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
 [95795.012327] RAX: 0000000000000000 RBX: 0000563386706030 RCX: 00007fa678cb99a7
 [95795.013432] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000056338670ca90
 [95795.014558] RBP: 000056338670ca90 R08: 000056338670c740 R09: 0000000000000015
 [95795.015577] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007fa6791bae64
 [95795.016569] R13: 0000000000000000 R14: 0000563386706210 R15: 00007ffccf0ab160
 [95795.017662] Code: 00 00 00 4c 8b a3 98 25 00 00 49 83 bc 24 60 ff ff ff 00 75 16 49 83 bc 24 68 ff ff ff 00 75 0b 49 83 bc 24 70 ff ff ff 00 74 16 <0f> ff 49 8d b4 24 18 ff ff ff 31 c9 31 d2 48 89 df e8 93 7a ff
 [95795.020538] ---[ end trace e95877675c6ec00d ]---
 [95795.021259] BTRFS info (device sdi): space_info 4 has 1072775168 free, is not full
 [95795.022390] BTRFS info (device sdi): space_info total=1073741824, used=114688, pinned=0, reserved=0, may_use=786432, readonly=65536

Fix this by ensuring the zero range operation does not call
btrfs_truncate_block() if the corresponding extent is an unwritten one
(it's pointless anyway, since reading from an unwritten extent yields
zeroes).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

For a fallocate's zero range operation that targets a range with an end
that is not aligned to the sector size, we can end up not updating the
inode's i_size. This happens when the last page of the range maps to an
unwritten (prealloc) extent and before that last page we have either a
hole or a written extent. This is because in this scenario we relied
on a call to btrfs_prealloc_file_range() to update the inode's i_size,
however it can only update the i_size to the "down aligned" end of the
range.

Example:

 $ mkfs.btrfs -f /dev/sdc
 $ mount /dev/sdc /mnt
 $ xfs_io -f -c "pwrite -S 0xff 0 428K" /mnt/foobar
 $ xfs_io -c "falloc -k 428K 4K" /mnt/foobar
 $ xfs_io -c "fzero 0 430K" /mnt/foobar
 $ du --bytes /mnt/foobar
 438272	/mnt/foobar

The inode's i_size was left as 428Kb (438272 bytes) when it should have
been updated to 430Kb (440320 bytes).
Fix this by always updating the inode's i_size explicitly after zeroing
the range.

Fixes: ba6d5887946ff86d93dc ("Btrfs: add support for fallocate's zero range operation")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

During a buffered IO write, we can have an extent state that we got when
we locked the range (if the range starts at an offset lower than eof), so
always pass it to btrfs_dirty_pages() so that setting the delalloc bit
in the range does not need to do a full search in the inode's io tree,
saving time and reducing the amount of time we hold the io tree's lock.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This implements support the zero range operation of fallocate. For now
at least it's as simple as possible while reusing most of the existing
fallocate and hole punching infrastructure.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Since fail stripe index in rbio would be used to decide which
algorithm reconstruction would be run, we cannot merge rbios if
their's fail striped indexes are different, otherwise, one of the two
reconstructions would fail.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Given the above
'
if (last->operation != cur->operation)
	return 0;
',
it's guaranteed that two operations are same.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Assign ret = -EINVAL where it is actually required.
Remove { } around single line if else code.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

No functional change rearrange the mutex_unlock.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ edit subject ]
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs_device::scrub_device is not a device which is being scrubbed,
but it holds the scrub context, so rename to reflect the same. No
functional changes here.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

There is no other consumer for btrfs_handle_error() other than
__btrfs_handle_fs_error(), further this function quite small.
Merge it into its parent.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ reformat comment ]
Signed-off-by: David Sterba <dsterba@suse.com>

__btrfs_handle_fs_error() sets BTRFS_FS_STATE_ERROR, and calls
btrfs_handle_error() so no need to check if the BTRFS_FS_STATE_ERROR
is set in btrfs_handle_error(). And there is no other user of
btrfs_handle_error() as well.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

There is a scenario that can end up with rebuild process failing to
return good content, i.e.
suppose that all disks can be read without problems and if the content
that was read out doesn't match its checksum, currently for raid6
btrfs at most retries twice,

- the 1st retry is to rebuild with all other stripes, it'll eventually
  be a raid5 xor rebuild,
- if the 1st fails, the 2nd retry will deliberately fail parity p so
  that it will do raid6 style rebuild,

however, the chances are that another non-parity stripe content also
has something corrupted, so that the above retries are not able to
return correct content, and users will think of this as data loss.
More seriouly, if the loss happens on some important internal btree
roots, it could refuse to mount.

This extends btrfs to do more retries and each retry fails only one
stripe.  Since raid6 can tolerate 2 disk failures, if there is one
more failure besides the failure on which we're recovering, this can
always work.

The worst case is to retry as many times as the number of raid6 disks,
but given the fact that such a scenario is really rare in practice,
it's still acceptable.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The raid6 corruption is that,
suppose that all disks can be read without problems and if the content
that was read out doesn't match its checksum, currently for raid6
btrfs at most retries twice,

- the 1st retry is to rebuild with all other stripes, it'll eventually
  be a raid5 xor rebuild,
- if the 1st fails, the 2nd retry will deliberately fail parity p so
  that it will do raid6 style rebuild,

however, the chances are that another non-parity stripe content also
has something corrupted, so that the above retries are not able to
return correct content.

We've fixed normal reads to rebuild raid6 correctly with more retries
in Patch "Btrfs: make raid6 rebuild retry more"[1], this is to fix
scrub to do the exactly same rebuild process.

[1]: https://patchwork.kernel.org/patch/10091755/Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Update btrfs_check_rw_degradable() to check against the given device if
its lost.

We can use this function to know if the volume is going to be in
degraded mode OR failed state, when the given device fails.  Which is
needed when we are handling the device failed state.

A preparatory patch does not affect the flow as such.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
[ enhance comment ]
Signed-off-by: David Sterba <dsterba@suse.com>

All callers pass either GFP_NOFS or GFP_KERNEL now, so we can sink the
parameter to the function, though we lose some of the slightly better
semantics of GFP_KERNEL in some places, it's worth cleaning up the
callchains.
Signed-off-by: David Sterba <dsterba@suse.com>

There's only one instance where we pass different gfp mask to
unlock_extent_cached. Add a separate helper for that and then we can
drop the gfp parameter from unlock_extent_cached.
Signed-off-by: David Sterba <dsterba@suse.com>

Recent patches reworking the mount path left some unused parameters. We
pass a vfsmount to mount_subvol, the flags and data (ie. mount options)
have been already applied and we will not need them.
Signed-off-by: David Sterba <dsterba@suse.com>

Long ago, commit edf24abe ("btrfs: sanity mount option parsing and
early mount code") split the btrfs_parse_options() into two parts
(btrfs_parse_early_options() and btrfs_parse_options()). As a result,
btrfs_parse_optins no longer gets called twice and is the last one to
parse mount option string. Therefore there is no need to dup it.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

In fact nobody is waiting on @wait's waitqueue, it can be safely
removed.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The bio is not referenced after it has been submitted and the endio is
going to consume the sole reference on successful submission. On error,
the callers of __btrfs_submit_dio_bio do invoke bio_put so we don't
leak it either.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The bio is never referenced after it has been submitted so there is no
point in getting an extra reference.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The bio that is passsed is the newly created repair bio which already
has a reference count of 1, which is going to be consumed by the
endio routine on successful submission. On error the handler also
calls bio_put.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

bio_get/set is necessary only if the bio is going to be referenced
following submissions. In the code paths where such calls are made
we don't really need them since the bio is referenced only if
btrfs_map_bio returns an error. And this function can return an error
prior to submission only. So referencing the bio is safe. Furthermore
we do call bio_endio which will consume the last reference. So let's
remove the redundant calls.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>