- 25 Aug, 2008 10 commits
-
-
Andreas Mohr authored
- use specs-derived register name enums instead of open-coded numeric values, for better understanding of things - fix naming confusion ("gcr" was _NOT_ the GCR register stuff, but instead the io _base_ which has multiplexed _access_ to GCR config space, at _sub_ registers 0x08 and 0x0c) - add FIXME comments about a race condition and MPU401 features Signed-off-by:Andreas Mohr <andi@lisas.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jaroslav Kysela <perex@perex.cz>
-
Takashi Iwai authored
Added tiwai to MAINTAINERS (per request of akpm) Signed-off-by:
-
Thomas Bogendoerfer authored
With the restructering of the indy button handling the old OSS HAL2 driver got broken. Since there is a new ALSA driver for HAL2, the experimental OSS driver is obsolete and will be removed by this patch. Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Takashi Iwai authored
When bdl_pos_adj=0 is given, disable the position-check and the delayed period update mechanism. Usually bdl_pos_adj=0 is set only for the debugging purpose on really broken hardwares. It's better to disable the extra complexity in such a case. Signed-off-by:
-
Krzysztof Helt authored
Mute sound by setting mute bit without setting volume to 0. It makes both source code and binary shorter. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Takashi Iwai authored
Added the basic support of AD1882A codec chip. It's almost compatible with AD1882, but with a digital mic and some differences in connections. Signed-off-by:
-
Krzysztof Helt authored
Remove card pointer from the snd_opl3sa2 structure and break circular reference snd_card->snd_opl3sa2->snd_card. Signed-off-by:
Rene Herman <rene.herman@gmail.com> Signed-off-by:
-
Takashi Iwai authored
Set up channel information for HDMI widgets. This will allow LPCM with multiple channels supported on some HDMI devices. TODO: It still doesn't check ELD and doesn't change PCM parameters dynamically. Signed-off-by:
-
Takashi Iwai authored
Signed-off-by:
-
Takashi Iwai authored
Signed-off-by:
-
- 19 Aug, 2008 1 commit
-
-
Ilpo Järvinen authored
Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
- 15 Aug, 2008 8 commits
-
-
Jaroslav Kysela authored
Signed-off-by: -
Jaroslav Kysela authored
checkpatch.pl does not like assignment in if condition Signed-off-by: -
Daniel THOMPSON authored
The dummy driver uses runtime->private_free but still frees its pcm structures on error paths. This is esoteric because the error paths in question are unreachable. Thus the bug is only a problem when someone copies this code into other drivers. Signed-off-by:
Daniel R Thompson <daniel.thompson@st.com> Signed-off-by:
-
Matthew Ranostay authored
Fixed several noise issues with DACs and ADCs on some 92HD75xxx based codecs with certain revision id's. Signed-off-by:
Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by:
-
Matthew Ranostay authored
Dynamically create capture mux volume controls when a output amp is detected. Signed-off-by:
-
Takashi Iwai authored
Signed-off-by:
-
Takashi Iwai authored
Added the ignore_ctl_error parameter to enable/disable the control-error handling for mixer interfaces. It was a hard-coded ifdef, and now you can change it more easily. Signed-off-by:
-
Takashi Iwai authored
Added the missing description of module parameters of usb-audio driver to ALSA-Configuration.txt. Signed-off-by:
-
- 13 Aug, 2008 18 commits
-
-
Jaroslav Kysela authored
Export HDA codec subvendor ID and revision ID to user space via the components variable. Our alsactl utility requires these values for the perfect hardware identification. Signed-off-by: -
Alexander Beregalov authored
ALSA-Configuration.txt: supported cards update Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by:
-
Alexander Beregalov authored
sound/pci: supported cards update Signed-off-by:
-
Takashi Iwai authored
The widget node 0x21 should be initialized as unmuted/full (0dB) as default. This will reduce additional manual work by user at the first time use. Signed-off-by:
-
Takashi Iwai authored
The SPDIF output is toggled at each time any SPDIF status bits are changed because of the known problems on some codecs. But, this also results in loosing the sync, and the problem is more obvious on HDMI output over SPDIF. Since the toggle is necessary only for some codecs, we should check whether this workaround is needed and skip if unnecessary. Signed-off-by:
-
Alexander Beregalov authored
sound/pci/Kconfig: update for ice1712/24 Signed-off-by:
-
Alexander Beregalov authored
ice1724/revo: simple clean up Signed-off-by:
-
Takashi Iwai authored
Use the standard WARN() macro for snd_BUG(). Signed-off-by:
-
Takashi Iwai authored
Remove snd_assert() completely now. Signed-off-by:
-
Takashi Iwai authored
Kill snd_assert() in other places, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by:
-
Takashi Iwai authored
Kill snd_assert() in sound/pci/*, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by:
-
Takashi Iwai authored
Kill snd_assert() in sound/isa/*, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by:
-
Takashi Iwai authored
Kill snd_assert() in sound/core/*, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by:
-
Takashi Iwai authored
Introduced snd_BUG_ON() macro as a replacement of snd_assert() macro. snd_assert() is pretty ugly as it has the control flow in its argument. OTOH, snd_BUG_ON() behaves like a normal conditional, thus it's much easier to read the flow. Signed-off-by:
-
Rene Herman authored
Signed-off-by:
-
roel kluin authored
As is the clipping ceiling loop appears wrong anyways Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Timur Tabi authored
On the Freescale MPC8610, SSI1 is hard-coded to use DMA channels 0 and 1 for playback and capture, and SSI2 is hard-coded to use DMA channels 2 and 3. This patch fixes the fabric driver so that it uses the right channels. Signed-off-by:
Timur Tabi <timur@freescale.com> Signed-off-by:
-
Mark Brown authored
The WM8580 is an audio CODEC designed for DVD and surround sound applications, offering three stereo DACs and a stereo ADC. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
- 06 Aug, 2008 3 commits
-
-
Rene Herman authored
Make snd_ad1848_probe() easier to follow. With an exception for only trying once as soon as the codec is out of init (which should be all that's needed) the detection logic should be unchanged. Signed-off-by:
-
Takashi Iwai authored
Use pin 37 for mono-out as default on ALC203. Reported-by:
george pee <georgepee@gmail.com> Tested-by:
-
Phillip Michael Jordan authored
The support for the SB Extigy's remote seems to be broken in all recent ALSA versions, including 1.0.17. The driver detects the event correctly, then submits a URB to query the RC code. On the Extigy, the URB is submitted with a length of 2 bytes. My hardware, however, only replies with 1 byte, containing the correct RC button code. The current implementation discards this as being too short. (line 1784 of usbmixer.c) This patch specifies a "minimum packet length" in the remote control configuration. I've left the values for the Audigy 2/Live! the same as the packet length, as I'm assuming the existing code works with them. (I don't have the hardware to confirm) This fixes the Extigy RC support, e.g. for use with Lirc. Signed-off-by:
Phillip Michael Jordan <phil@philjordan.eu> Signed-off-by:
-
