- 06 Feb, 2008 40 commits
-
-
Ben Dooks authored
Change the initial pattern in the s3c2410 framebuffer driver to black. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Vincent Sanders <vince@simtec.co.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ben Dooks authored
Update the debugging in the s3c2410 framebuffer driver. Signed-off-by:
-
Ben Dooks authored
Add support for the S3C2412 to the S3C2410 frame buffer driver by ensuring that any moved registers can be dealt with. Signed-off-by:
-
Ben Dooks authored
Move the console suspend to before we save the state of the framebuffer to ensure that it does not try and change the fb state again once we have copied it out. Signed-off-by:
-
Krzysztof Helt authored
Fix garbled letters on big endian machines with acceleration enabled. This makes pm2fb works fine with full acceleration on sparc machine (card known as Sun PGX-32 or TechSource Raptor GFX-8P). Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Geoff Levand authored
Fix modedb typos Signed-off-by:
Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Geert Uytterhoeven authored
cleanup sweep: - Kill ps3fb_priv.xdr_ea and ps3fb_priv.xdr_size, use info->screen_base and info->fix.smem_len instead. - Kill superfluous assignments to info->fix.smem_start, info->fix.smem_len, and info->screen_base in ps3fb_set_par(). Their values never change. - Add sparse annotations to casts to kill address space warnings Signed-off-by: -
Geert Uytterhoeven authored
Round up arbitrary video modes until they fit (if possible) Signed-off-by:
-
Geert Uytterhoeven authored
Reorganize modedb handling: - Reorder the video modes in ps3fb_modedb, for easier indexing using PS3AV_MODE_* numbers, - Introduce ps3fb_native_vmode(), to convert from native (PS3AV_MODE_*) mode numbers to struct fb_videomode *, - Rename and move ps3fb_default_mode() to ps3fb_vmode(). Signed-off-by: -
Geert Uytterhoeven authored
Allow all video modes where the visible resolution plus the black borders matches a native resolution Signed-off-by:
-
Geert Uytterhoeven authored
Frame buffer offsets don't have to be `unsigned long', `unsigned int' is sufficient Signed-off-by:
-
Geert Uytterhoeven authored
kill ps3fb_res[], as all information it contains can be obtained in some other way. Signed-off-by:
-
Geert Uytterhoeven authored
Open-code the X_OFF(), Y_OFF(), WIDTH(), HEIGHT(), and VP_OFF() macros, as they're used in one place only Signed-off-by:
-
Geert Uytterhoeven authored
Kill PS3FB_FULL_MODE_BIT, use PS3AV_MODE_FULL instead Signed-off-by:
-
Geert Uytterhoeven authored
Use symbolic names for video modes Signed-off-by:
-
Geert Uytterhoeven authored
ps3av_get_scanmode() and ps3av_get_refresh_rate() are unused, so remove them Signed-off-by:
-
David Brownell authored
On the sam9 EK boards, the LCD backlight is hooked up to a PWM output from the LCD controller. It's controlled by "contrast" registers though. This patch lets boards declare that they have that kind of backlight control. The driver can then export this control, letting screenblank and other operations actually take effect ... reducing the typically substantial power drain from the backlight. Note that it's not fully cooked - doesn't force backlight off during system suspend - the "power" and "blank" events may not be done right This should be easily added in the future. [nicolas.ferre@atmel.com: remove unneeded inline and rename functions] Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Magnus Damm authored
Avoid displaying garbage on unused framebuffers. For most users a single framebuffer is used together with fbcon. sm501fb supports two framebuffers where one often is assigned to fbcon and the other one is left unused during the boot. The problem here is that framebuffers not in use by fbcon happen to display garbage. This can easily be solved by making sure that framebuffer memory and palette ram are cleared. The problem can be observed by using looking at the panel output (fb1) after booting the kernel with fbcon on crt (fb0). This is the default configuration. It's also possible to watch the garbage on the crt framebuffer by passing "fbcon=map:1" on the kernel cmdline. This will assign fbcon to the panel (fb1) and leave the crt (fb0) unused. Signed-off-by:
Magnus Damm <damm@igel.co.jp> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Magnus Damm authored
This patch makes it possible to control panel pins usage with flags passed from the platform data. Without this patch the sm501fb driver always controls the VBIASEN and FPEN pins. The polarity and use of these pins are very platform specific, so this patch introduces the flags SM501FB_FLAG_PANEL_USE_VBIASEN and SM501FB_FLAG_PANEL_USE_FPEN which enable the use of these pins. This patch is needed to support the a Sharp LQ104V1DG21 lcd panel on SuperH platforms such as R2D-1 and R2D-PLUS boards. Letting the sm501fb driver control the FPEN and VBIASEN pins like today just results in lcd panel flicker. Signed-off-by:
-
Julia Lawall authored
pci_get_device does a pci_dev_get, so pci_dev_put needs to be called in an error case The problem was fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @exists@ type T1,T2; identifier E; statement S,S1; expression x1,x2,x3; expression test; int ret != 0; @@ struct pci_dev *E; ... ( E = \(pci_get_slot\|pci_get_device\|pci_get_bus_and_slot\)(...); if (E == NULL) S | if ((E = \(pci_get_slot\|pci_get_device\|pci_get_bus_and_slot\)(...)) == NULL) S ) ... when != pci_dev_put(...,(T1)E,...) when != if (E != NULL) { ... pci_dev_put(...,(T1)E,...); ...} when != x1 = (T1)E when != E = x3; when any ( if (E == NULL) S1 | if (test) + { ( + pci_dev_put(E); return; | + pci_dev_put(E); return ret; ) + } | if (test) { ... when != pci_dev_put(...,(T2)E,...) when != if (E != NULL) { ... pci_dev_put(...,(T2)E,...); ...} when != x2 = (T2)E ( + pci_dev_put(E); return; | + pci_dev_put(E); return ret; ) } ) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Randy Dunlap authored
Some cleanups in uvesafb: - The custom module_param() get/set functions don't need to be inlined since it is referred to via a pointer in a struct. - don't end a #define with a ';' - remove one of the single quote marks in "''ypan'" Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Michal Januszewski <spock@gentoo.org> Signed-off-by:
-
Randy Dunlap authored
tdfxfb_setup() can be __init. This fixes the modpost section mismatch warnings: WARNING: vmlinux.o(.text+0x4cff9b): Section mismatch: reference to .init.data:mode_option (between 'tdfxfb_setup' and 'getclkMHz') WARNING: vmlinux.o(.text+0x4cffa8): Section mismatch: reference to .init.data: (between 'tdfxfb_setup' and 'getclkMHz') [krzysztof.h1@poczta.fm: use __init, not __devinit] Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Paul Mundt authored
The current nvidiafb_check_var() simply bails out if the selected mode is out of range of the panel dimensions. A good question would be why the bogus mode is being selected in the first place -- the panel dimensions that are read back are certainly bogus, but alas, I have no idea where to even begin looking at the i2c/EDID/DDC mess: nvidiafb: Device ID: 10de0165 nvidiafb: CRTC0 analog not found nvidiafb: CRTC1 analog not found nvidiafb: EDID found from BUS1 nvidiafb: CRTC 0 is currently programmed for DFP nvidiafb: Using DFP on CRTC 0 nvidiafb: Panel size is 1280 x 1024 nvidiafb: Panel is TMDS nvidiafb: unable to setup MTRR nvidiafb: Flat panel dithering disabled nvidiafb: PCI nVidia NV16 framebuffer (64MB @ 0xC0000000) In my .config I presently have: CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y CONFIG_FB_NVIDIA_I2C=y I've not tried fiddling with these options, as I haven't the vaguest idea what I should be looking at. As a workaround, simply groveling for a new mode based on the probed dimensions seems to work ok. While it would be nice to debug this further and sort out why the panel information is bogus, I think it's still worth retrying the mode based on the panel information at hand as a last-ditch effort, rather than simply bailing out completely. Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Cc: Antonino A. Daplas <adaplas@gmail.com> Signed-off-by:
-
Andrew Morton authored
__ALIGN_MASK() is an internal implementation detail of ALIGN(). Let's not needlessly fatten the interface in this driver. [fujita.tomonori@lab.ntt.co.jp: fix it] Cc: Alan Hourihane <alanh@fairlite.demon.co.uk> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
-
Andrew Morton authored
Fix bug identified by Marcio Buss in http://bugzilla.kernel.org/show_bug.cgi?id=9565 - neofb can overwrite a field in the fb_info struct. This fix will result in truncated device identification strings - perhaps fb_innfo.fix.id can be made larger? Cc: Marcio Buss <marciobuss@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Christian Trefzer <ctrefzer@gmx.de> Signed-off-by:
-
Adrian Bunk authored
WARNING: vmlinux.o(.text+0x46e456): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') WARNING: vmlinux.o(.text+0x46e45c): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') WARNING: vmlinux.o(.text+0x46e49b): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') WARNING: vmlinux.o(.text+0x46e4a0): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') WARNING: vmlinux.o(.text+0x46e4bc): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') WARNING: vmlinux.o(.text+0x46e4c2): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') WARNING: vmlinux.o(.text+0x46e5c1): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') WARNING: vmlinux.o(.text+0x46e5c7): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') Signed-off-by:
Adrian Bunk <bunk@kernel.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Antonino Daplas <adaplas@gmail.com> Signed-off-by:
-
Marcin Slusarz authored
Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Marcin Slusarz authored
Signed-off-by:
-
Marcin Slusarz authored
Signed-off-by:
-
Haavard Skinnemoen authored
Setting a display timing parameter too high or too low may cause it to wrap around and thus become completely wrong. Validate the timings in atmel_lcdfb_check_var() and saturate to the highest or lowest possible value if necessary. Signed-off-by:
Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Nick Piggin authored
Convert fb defio from nopage to fault. Switch from OOM to SIGBUS if the resource is not available. Signed-off-by:
Nick Piggin <npiggin@suse.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by:
-
Andre Haupt authored
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Andre Haupt <andre@bitwigglers.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Andre Haupt authored
This fixes a sparse warning about symbol 'i' shadowing an earlier one. Signed-off-by:
-
Julia Lawall authored
pci_get_class implicitly does a pci_dev_put on its second argument, so pci_dev_put is only needed if there is a break out of the loop. The semantic match detecting this problem is as follows: // <smpl> @@ expression dev; expression E; @@ * pci_dev_put(dev) ... when != dev = E ( * pci_get_device(...,dev) | * pci_get_device_reverse(...,dev) | * pci_get_subsys(...,dev) | * pci_get_class(...,dev) ) // </smpl> Signed-off-by:
-
Adrian Bunk authored
WARNING: vmlinux.o(.text+0xb851a): Section mismatch: reference to .init.text:hpfb_init_one (between 'hpfb_dio_probe' and 'read_null') hpfb_init_one() must be __devinit since it's called by the __devinit hpfb_dio_probe(). Signed-off-by:
-
Adrian Bunk authored
geode_modedb[] can become static. Signed-off-by:
-
Guennadi Liakhovetski authored
This third part of an extension to support more pca953x chips updates the logic to handle the smaller register widths used by the 4-bit and 8-bit parts, and to use the chip type to determine how many GPIOs it provides. As long as we don't support interrupt and reset capabilities, those size issues are the only software-visible differences between these parts. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by:
-
Guennadi Liakhovetski authored
This second part of an extension to support more pca953x chips renames the C and Kconfig symbols. All affected files were updated by sed, except for a couple of obvious exceptions. It also updates the Kconfig helptext. Signed-off-by:
-
Guennadi Liakhovetski authored
First part of an extension to let the pca9539 driver support more chips, starting with pca9534, pca9535, pca9536, pca9537, and pca9538. This renames the files and modifies the Makefile. Signed-off-by:
-
Ville Syrjala authored
Add a GPIO 1-wire bus master driver. The driver used the GPIO API to control the wire and the GPIO pin can be specified using platform data similar to i2c-gpio. The driver was tested with AT91SAM9260 + DS2401. Signed-off-by:
Ville Syrjala <syrjala@sci.fi> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
