- 21 Jun, 2006 28 commits
-
-
Kimball Murray authored
A recent Stratus x86_64 platform uses a system ioapic that is a PCI device located below a PCI bridge. Other platforms like this may exist. This patch fixes a problem wherein the kernel's PCI setup code moves the ioapic to an address other than that assigned by the BIOS. It simply adds another exclusion (which already includes classless devices and host bridges) to the function pbus_assign_resources_sorted so that it will not move the ioapic. If the ioapic is moved, the fixmap mapping to it is broken, so the OS should leave it alone. From: Kimball Murray <kimball.murray@gmail.com> Signed-off-by:Greg Kroah-Hartman <gregkh@suse.de>
-
bibo,mao authored
In IA64 platform, msi driver does not use irq_vector variable, and in x86 platform LAST_DEVICE_VECTOR should one before FIRST_SYSTEM_VECTOR, this patch modify this. Signed-off-by:
bibo, mao <bibo.mao@intel.com> Signed-off-by:
-
Shaohua Li authored
Brice said the pci_save_msi_state breaks his driver in his special usage (not in suspend/resume), as pci_save_msi_state will disable msi mode. In his usage, pci_save_state will be called at runtime, and later (after the device operates for some time and has an error) pci_restore_state will be called. In another hand, suspend/resume needs disable msi mode, as device should stop working completely. This patch try to workaround this issue. Drivers are expected call pci_disable_device in suspend time after pci_save_state. Signed-off-by:
Shaohua Li <shaohua.li@intel.com> Signed-off-by:
-
Rajesh Shah authored
We recently ran into a problem where the e1000 device failed to work properly on the kexec kernel. MSI was enabled for the device in the main kernel when it crashed. The e1000 driver tried to enable MSI on the kexec kernel, but the code bailed early when it found that MSI was already enabled in the hardware, even though the software state was not properly set up in the kexec'd kernel. This patch fixes the problem by moving the early return to after making sure that the software state is properly initialized. Signed-off-by:
Rajesh Shah <rajesh.shah@intel.com> Signed-off-by:
-
Brice Goglin authored
The PCI_BUS_FLAGS_NO_MSI bus flags does not appear do be inherited correctly from the amd8131 MSI quirk to its parent busses. It makes devices behind a bridge behind amd8131 try to enable MSI while the amd8131 does not support it. We fix this by looking at flags of all parent busses in pci_enable_msi() and pci_enable_msix(). By the way, also add the missing dev->no_msi check in pci_enable_msix() Signed-off-by:
Brice Goglin <brice@myri.com> Signed-off-by:
-
Brent Casavant authored
Move various QLogic, Vitesse, and Intel storage controller PCI IDs to the main header file. Signed-off-by:
Brent Casavant <bcasavan@sgi.com> Acked-by:
Jes Sorensen <jes@sgi.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Doug Thompson authored
Currently, the EDAC (error detection and correction) modules that are in the kernel contain some features that need to be moved. After some good feedback on the PCI Parity detection code and interface (http://www.ussg.iu.edu/hypermail/linux/kernel/0603.1/0897.html) this patch ADDs an new attribute to the pci_dev structure: Namely the 'broken_parity_status' bit. When set this indicates that the respective hardware generates false positives of Parity errors. The EDAC "blacklist" solution was inferior and will be removed in a future patch. Also in this patch is a PCI quirk.c entry for an Infiniband PCI-X card which generates false positive parity errors. I am requesting comments on this AND on the possibility of a exposing this 'broken_parity_status' bit to userland via the PCI device sysfs directory for devices. This access would allow for enabling of this feature on new devices and for old devices that have their drivers updated. (SLES 9 SP3 did this on an ATI motherboard video device). There is a need to update such a PCI attribute between kernel releases. This patch just adds a storage place for the attribute and a quirk entry for a known bad PCI device. PCI Parity reaper/harvestor operations are in EDAC itself and will be refactored to use this PCI attribute instead of its own mechanisms (which are currently disabled) in the future. Signed-off-by:
Doug Thompson <norsk5@xmission.com> Signed-off-by:
-
Rajesh Shah authored
When a PCI device is disabled via pci_disable_device(), it's still left decoding its BAR resource ranges even though its driver will have likely released those regions (and may even have unloaded). pci_enable_device() already explicitly enables BAR resource decode for the device being enabled. This patch disables resource decode for the PCI device being disabled, making it symmetric with the enable call. I saw this while doing something else, not because of a problem report. Still, seems to be the correct thing to do. Signed-off-by:
-
Muthu Kumar authored
There were two instances of pci_acpi_init(), one in drivers/pci/pci-acpi.c and another in arch/i386/pci/acpi.c. Rename the one in pci-acpi.c and make it consistent with other names in the same file. Signed-off-by:
Muthukumar R <muthur@gmail.com> Signed-off-by:
-
Kristen Accardi authored
If a device is already enabled, don't bother reenabling it. Signed-off-by:
Kristen Carlson Accardi <kristen.c.accardi@intel.com> Acked-By:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
Arjan van de Ven authored
[PATCH] PCI: Add a "enable" sysfs attribute to the pci devices to allow userspace (Xorg) to enable devices without doing foul direct access This patch adds an "enable" sysfs attribute to each PCI device. When read it shows the "enabled-ness" of the device, but you can write a "0" into it to disable a device, and a "1" to enable it. This later is needed for X and other cases where userspace wants to enable the BARs on a device (typical example: to run the video bios on a secundary head). Right now X does all this "by hand" via bitbanging, that's just evil. This allows X to no longer do that but to just let the kernel do this. Signed-off-by:
Dave Airlie <airlied@linux.ie> Signed-off-by:
-
Kumar Gala authored
PCI: Add pci_assign_resource_fixed -- allow fixed address assignments On some embedded systems the PCI address for hotplug devices are not only known a priori but are required to be at a given PCI address for other master in the system to be able to access. An example of such a system would be an FPGA which is setup from user space after the system has booted. The FPGA may be access by DSPs in the system and those DSPs expect the FPGA at a fixed PCI address. Added pci_assign_resource_fixed() as a way to allow assignment of the PCI devices's BARs at fixed PCI addresses. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
Bjorn Helgaas authored
When we detect a 64-bit pre-set address in a BAR on a 32-bit platform, we disable it and treat it as if it had been unset, thus allowing the general address assignment code to assign a new address to it when the device is enabled. This can happen either if the firmware assigns 64-bit addresses; additionally, some cards have been found "in the wild" which do not come out of reset with all the BAR registers set to zero. Unfortunately, the patch that implemented this tested the low part of the address instead of the high part of the address. This patch fixes that. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
H. Peter Anvin authored
[pci] Ignore pre-set 64-bit BARs on 32-bit platforms Currently, Linux always rejects a device which has a pre-set 64-bit address on a 32-bit platform. On systems which do not do PCI initialization in firmware, this causes some devices which don't correctly power up with all BARs zero to fail. This patch makes the kernel automatically zero out such an address (thus treating it as if it had not been set at all, meaning it will assign an address if necessary). I have done this only for devices, not bridges. It seems potentially hazardous to do for bridges. Signed-off-by:
H. Peter Anvin <hpa@c2micro.com> Signed-off-by:
-
Mark Maule authored
MSI callouts for altix. Involves a fair amount of code reorg in sn irq.c code as well as adding some extensions to the altix PCI provider abstaction. Signed-off-by:
Mark Maule <maule@sgi.com> Signed-off-by:
-
Mark Maule authored
Abstract IA64_FIRST_DEVICE_VECTOR/IA64_LAST_DEVICE_VECTOR since SN platforms use a subset of the IA64 range. Implement this by making the above macros global variables which the platform can override in it setup code. Also add a reserve_irq_vector() routine used by SN to mark a vector's as in-use when that weren't allocated through assign_irq_vector(). Signed-off-by:
-
Mark Maule authored
Abstract portions of the MSI core for platforms that do not use standard APIC interrupt controllers. This is implemented through a new arch-specific msi setup routine, and a set of msi ops which can be set on a per platform basis. Signed-off-by:
-
Brice Goglin authored
Add the vendor-specific extended capability PCI_CAP_ID_VNDR. It will be used by the Myri-10G Ethernet driver (will be submitted soon). Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (30 commits) [PATCH] PCI Hotplug: Fix recovery path from errors during pcie_init() [PATCH] PCI Hotplug: fake NULL pointer dereferences in IBM Hot Plug Controller Driver [PATCH] shpchp: Cleanup improper info messages [PATCH] shpchp: Remove Unused hpc_evelnt_lock [PATCH] shpchp: Cleanup interrupt polling timer [PATCH] shpchp: Cleanup SHPC commands [PATCH] shpchp: Cleanup interrupt handler [PATCH] shpchp: Remove unnecessary hpc_ctlr_handle check [PATCH] pciehp: Implement get_address callback [PATCH] pciehp: Add missing pci_dev_put [PATCH] pciehp: Replace pci_find_slot() with pci_get_slot() [PATCH] SGI Hotplug: Incorrect power status [PATCH] shpchp: Create shpchpd at controller probe time [PATCH] shpchp: Mask Global SERR and Intr at controller release time [PATCH] SHPC: Fix SHPC Contoller SERR-INT Register bits access [PATCH] SHPC: Fix SHPC Logical Slot Register bits access [PATCH] SHPC: Cleanup SHPC Logical Slot Register bits access [PATCH] SHPC: Cleanup SHPC Logical Slot Register access [PATCH] SHPC: Cleanup SHPC register access [PATCH] pciehp: Fix programming hotplug parameters ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (85 commits) [SCSI] 53c700: remove reliance on deprecated cmnd fields [SCSI] hptiop: don't use cmnd->bufflen [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver [SCSI] aacraid: small misc. cleanups [SCSI] aacraid: Update supported product information [SCSI] aacraid: Fix return code interpretation [SCSI] scsi_transport_sas: fix panic in sas_free_rphy [SCSI] remove RQ_SCSI_* flags [SCSI] remove scsi_request infrastructure [SCSI] mptfusion: change driver revision to 3.03.10 [SCSI] mptfc: abort of board reset leaves port dead requiring reboot [SCSI] mptfc: fix fibre channel infinite request/response loop [SCSI] mptfc: set fibre channel fw target missing timers to one second [SCSI] mptfusion: move fc event/reset handling to mptfc [SCSI] spi transport: don't allow dt to be set on SE or HVD buses [SCSI] aic7xxx: expose the bus setting to sysfs [SCSI] scsi: remove Documentation/scsi/cpqfc.txt [SCSI] drivers/scsi: Use ARRAY_SIZE macro [SCSI] Remove last page_address from dc395x.c [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver ... Fixed up conflicts in drivers/message/fusion/mptbase.c manually (due to the sparc interrupt cleanups)
-
Brice Goglin authored
Introduce __iowrite64_copy. It will be used by the Myri-10G Ethernet driver to post requests to the NIC. This driver will be submitted soon. __iowrite64_copy copies to I/O memory in units of 64 bits when possible (on 64 bit architectures). It reverts to __iowrite32_copy on 32 bit architectures. Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bcollins/linux1394-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bcollins/linux1394-2.6: (28 commits) eth1394: replace __constant_htons by htons ieee1394: adjust code formatting in highlevel.c ieee1394: hl_irqs_lock is taken in hardware interrupt context ieee1394_core: switch to kthread API ieee1394: sbp2: Kconfig fix ieee1394: add preprocessor constant for invalid csr address sbp2: fix deregistration of status fifo address space [PATCH] eth1394: endian fixes Fix broken suspend/resume in ohci1394 sbp2: use __attribute__((packed)) for on-the-wire structures sbp2: provide helptext for CONFIG_IEEE1394_SBP2_PHYS_DMA and mark it experimental Update feature removal of obsolete raw1394 ISO requests. sbp2: fix S800 transfers if phys_dma is off sbp2: remove ohci1394 specific constant ohci1394: make phys_dma parameter read-only ohci1394: set address range properties ieee1394: extend lowlevel API for address range properties sbp2: log number of supported concurrent logins sbp2: remove manipulation of inquiry response ieee1394: save RAM by using a single tlabel for broadcast transactions ...
-
Cedric Le Goater authored
It also adds all the related quad routines. Signed-off-by:
Cedric Le Goater <clg@fr.ibm.com> Acked-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Linus Torvalds authored
The color is now in the low bits of the parent pointer, and initializing it to 0 happens as part of the whole memset above, so just remove the unnecessary RB_CLEAR_COLOR. Signed-off-by: -
Herbert Xu authored
There has been an update to the forcedeth driver that added a few new uses of xmit_lock which is no longer meant to be used directly. This patch replaces them with netif_tx_lock_bh. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Linus Torvalds authored
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (42 commits) [ARM] Fix tosa build error [ARM] 3610/1: Make reboot work on Versatile [ARM] 3609/1: S3C24XX: defconfig update for s3c2410_defconfig [ARM] 3591/1: Anubis: IDE device definitions [ARM] Include asm/hardware.h not asm/arch/hardware.h [ARM] 3594/1: Poodle: Add touchscreen support + other updates [ARM] 3564/1: sharpsl_pm: Abstract some machine specific parameters [ARM] 3561/1: Poodle: Correct the MMC/SD power control [ARM] 3593/1: Add reboot and shutdown handlers for Zaurus handhelds [ARM] 3599/1: AT91RM9200 remove global variables [ARM] 3607/1: AT91RM9200 misc fixes [ARM] 3605/1: AT91RM9200 Power Management [ARM] 3604/1: AT91RM9200 New boards [ARM] 3603/1: AT91RM9200 remove old files [ARM] 3592/1: AT91RM9200 Serial driver update [ARM] 3590/1: AT91RM9200 Platform devices support [ARM] 3589/1: AT91RM9200 DK/EK board update [ARM] 3588/1: AT91RM9200 CSB337/637 board update [ARM] 3587/1: AT91RM9200 hardware headers [ARM] 3586/1: AT91RM9200 header update ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [ATM]: fix broken uses of NIPQUAD in net/atm [SCTP]: sctp_unpack_cookie() fix [SCTP]: Fix unintentional change to SCTP_ASSERT when !SCTP_DEBUG [NET]: Prevent multiple qdisc runs [CONNECTOR]: Initialize subsystem earlier. [NETFILTER]: xt_sctp: fix endless loop caused by 0 chunk length
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Update defconfig. [SPARC64]: Don't double-export synchronize_irq. [SPARC64]: Move over to GENERIC_HARDIRQS. [SPARC64]: Virtualize IRQ numbers. [SPARC64]: Kill ino_bucket->pil [SPARC]: Kill __irq_itoa(). [SPARC64]: bp->pil can never be zero [SPARC64]: Send all device interrupts via one PIL. [SPARC]: Fix iommu_flush_iotlb end address [SPARC]: Mark smp init functions as cpuinit [SPARC]: Add missing rw can_lock macros [SPARC]: Setup cpu_possible_map [SPARC]: Add topology_init()
-
- 20 Jun, 2006 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/birdLinus Torvalds authored
* 'rio.b19' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/bird: [PATCH] missing readb/readw in rio [PATCH] copy_to_user() from iomem is a bad thing [PATCH] forgotten swap of copyout() arguments [PATCH] handling rio MEMDUMP [PATCH] fix rio_copy_to_card() for OLDPCI case [PATCH] uses of ->Copy() in rioroute are bogus [PATCH] bogus order of copy_from_user() arguments [PATCH] rio ->Copy() expects the sourse as first argument [PATCH] trivial annotations in rio
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-currentLinus Torvalds authored
* 'audit.b21' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: (25 commits) [PATCH] make set_loginuid obey audit_enabled [PATCH] log more info for directory entry change events [PATCH] fix AUDIT_FILTER_PREPEND handling [PATCH] validate rule fields' types [PATCH] audit: path-based rules [PATCH] Audit of POSIX Message Queue Syscalls v.2 [PATCH] fix se_sen audit filter [PATCH] deprecate AUDIT_POSSBILE [PATCH] inline more audit helpers [PATCH] proc_loginuid_write() uses simple_strtoul() on non-terminated array [PATCH] update of IPC audit record cleanup [PATCH] minor audit updates [PATCH] fix audit_krule_to_{rule,data} return values [PATCH] add filtering by ppid [PATCH] log ppid [PATCH] collect sid of those who send signals to auditd [PATCH] execve argument logging [PATCH] fix deadlocks in AUDIT_LIST/AUDIT_LIST_RULES [PATCH] audit_panic() is audit-internal [PATCH] inotify (5/5): update kernel documentation ... Manual fixup of conflict in unclude/linux/inotify.h
-
Russell King authored
tosa.c references mdelay(), but was missing linux/delay.h Signed-off-by:Russell King <rmk+kernel@arm.linux.org.uk>
-
git://git.infradead.org/hdrcleanup-2.6Linus Torvalds authored
* git://git.infradead.org/hdrcleanup-2.6: (63 commits) [S390] __FD_foo definitions. Switch to __s32 types in joystick.h instead of C99 types for consistency. Add <sys/types.h> to headers included for userspace in <linux/input.h> Move inclusion of <linux/compat.h> out of user scope in asm-x86_64/mtrr.h Remove struct fddi_statistics from user view in <linux/if_fddi.h> Move user-visible parts of drivers/s390/crypto/z90crypt.h to include/asm-s390 Revert include/media changes: Mauro says those ioctls are only used in-kernel(!) Include <linux/types.h> and use __uXX types in <linux/cramfs_fs.h> Use __uXX types in <linux/i2o_dev.h>, include <linux/ioctl.h> too Remove private struct dx_hash_info from public view in <linux/ext3_fs.h> Include <linux/types.h> and use __uXX types in <linux/affs_hardblocks.h> Use __uXX types in <linux/divert.h> for struct divert_blk et al. Use __u32 for elf_addr_t in <asm-powerpc/elf.h>, not u32. It's user-visible. Remove PPP_FCS from user view in <linux/ppp_defs.h>, remove __P mess entirely Use __uXX types in user-visible structures in <linux/nbd.h> Don't use 'u32' in user-visible struct ip_conntrack_old_tuple. Use __uXX types for S390 DASD volume label definitions which are user-visible S390 BIODASDREADCMB ioctl should use __u64 not u64 type. Remove unneeded inclusion of <linux/time.h> from <linux/ufs_fs.h> Fix private integer types used in V4L2 ioctls. ... Manually resolve conflict in include/linux/mtd/physmap.h
-
git://git.infradead.org/~dwmw2/rbtree-2.6Linus Torvalds authored
* git://git.infradead.org/~dwmw2/rbtree-2.6: [RBTREE] Switch rb_colour() et al to en_US spelling of 'color' for consistency Update UML kernel/physmem.c to use rb_parent() accessor macro [RBTREE] Update hrtimers to use rb_parent() accessor macro. [RBTREE] Add explicit alignment to sizeof(long) for struct rb_node. [RBTREE] Merge colour and parent fields of struct rb_node. [RBTREE] Remove dead code in rb_erase() [RBTREE] Update JFFS2 to use rb_parent() accessor macro. [RBTREE] Update eventpoll.c to use rb_parent() accessor macro. [RBTREE] Update key.c to use rb_parent() accessor macro. [RBTREE] Update ext3 to use rb_parent() accessor macro. [RBTREE] Change rbtree off-tree marking in I/O schedulers. [RBTREE] Add accessor macros for colour and parent fields of rb_node
-
git://git.infradead.org/mtd-2.6Linus Torvalds authored
* git://git.infradead.org/mtd-2.6: (199 commits) [MTD] NAND: Fix breakage all over the place [PATCH] NAND: fix remaining OOB length calculation [MTD] NAND Fixup NDFC merge brokeness [MTD NAND] S3C2410 driver cleanup [MTD NAND] s3c24x0 board: Fix clock handling, ensure proper initialisation. [JFFS2] Check CRC32 on dirent and data nodes each time they're read [JFFS2] When retiring nextblock, allocate a node_ref for the wasted space [JFFS2] Mark XATTR support as experimental, for now [JFFS2] Don't trust node headers before the CRC is checked. [MTD] Restore MTD_ROM and MTD_RAM types [MTD] assume mtd->writesize is 1 for NOR flashes [MTD NAND] Fix s3c2410 NAND driver so it at least _looks_ like it compiles [MTD] Prepare physmap for 64-bit-resources [JFFS2] Fix more breakage caused by janitorial meddling. [JFFS2] Remove stray __exit from jffs2_compressors_exit() [MTD] Allow alternate JFFS2 mount variant for root filesystem. [MTD] Disconnect struct mtd_info from ABI [MTD] replace MTD_RAM with MTD_GENERIC_TYPE [MTD] replace MTD_ROM with MTD_GENERIC_TYPE [MTD] remove a forgotten MTD_XIP ...
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] PARPORT_SERIAL should depend on SERIAL_8250_PCI
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-mmc: [MMC] Add (MMC) to entry in MAINTAINERS file [MMC] sdhci truncated pointer fix
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits) [ARM] 3559/1: S3C2442: core and serial port [ARM] 3557/1: S3C24XX: centralise and cleanup uart registration [ARM] 3558/1: SMDK24XX: LED platform devices [ARM] 3534/1: add spi support to lubbock platform [ARM] 3554/1: ARM: Fix dyntick locking [ARM] 3553/1: S3C24XX: earlier print of cpu idcode info [ARM] 3552/1: S3C24XX: Move VA of GPIO for low-level debug [ARM] 3551/1: S3C24XX: PM code failes to compile with CONFIG_DCACHE_WRITETHROUGH [ARM] 3550/1: OSIRIS: fix serial port map for 1:1 [ARM] 3548/1: Fix the ARMv6 CPU id in compressed/head.S [ARM] 3335/1: Old-abi Thumb sys_syscall broken [ARM] 3467/1: [3/3] Support for Philips PNX4008 platform: defconfig [ARM] 3466/1: [2/3] Support for Philips PNX4008 platform: chip support [ARM] 3465/1: [1/3] Support for Philips PNX4008 platform: headers [ARM] 3407/1: lpd7x: documetation update [ARM] 3406/1: lpd7x: compilation fix for smc91x [ARM] 3405/1: lpd7a40x: CPLD ssp driver [ARM] 3404/1: lpd7a40x: AMBA CLCD support [ARM] 3403/1: lpd7a40x: updated default configurations [ARM] 3402/1: lpd7a40x: serial driver bug fix ...
-
Deepak Saxena authored
Patch from Deepak Saxena This patch makes soft reboot work on the Versatile board. Thanks to Catalin Marinas @ ARM for pointing out the proper way to do this. Signed-off-by:
Deepak Saxena <dsaxena@plexity.net> Signed-off-by:
-
Russell King authored
-
Thomas Gleixner authored
Following problems are addressed: - wrong status caused early break out of nand_wait() - removed the bogus status check in nand_wait() which is a relict of the abandoned support for interrupted erase. - status check moved to the correct place in read_oob - oob support for syndrom based ecc with strange layouts - use given offset in the AUTOOOB based oob operations Partially based on a patch from Vitaly Vool <vwool@ru.mvista.com> Thanks to Savin Zlobec <savin@epico.si> for tracking down the status problem. Signed-off-by:Thomas Gleixner <tglx@linutronix.de>
-
