A domain with a frontend that does not implement a control ring has been
seen to cause a crash during domain save. This was apparently because
the call to xenvif_deinit_hash() in xenvif_disconnect_ctrl() is made
regardless of whether a control ring was connected, and hence
xenvif_hash_init() was called.

This patch brings the call to xenvif_deinit_hash() in
xenvif_disconnect_ctrl() inside the if clause that checks whether the
control ring event channel was connected. This is sufficient to ensure
it is only called if xenvif_init_hash() was called previously.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When CONFIG_NET_CLS_ACT is disabled, we get a new warning in the mlx5
ethernet driver because the tc_for_each_action() loop never references
the iterator:

mellanox/mlx5/core/en_tc.c: In function 'mlx5e_stats_flower':
mellanox/mlx5/core/en_tc.c:431:20: error: unused variable 'a' [-Werror=unused-variable]
  struct tc_action *a;

This changes the dummy tc_for_each_action() macro by adding a
cast to void, letting the compiler know that the variable is
intentionally declared but not used here. I could not come up
with a nicer workaround, but this seems to do the trick.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: aad7e08d ("net/mlx5e: Hardware offloaded flower filter statistics support")
Fixes: 00175aec ("net/sched: Macro instead of CONFIG_NET_CLS_ACT ifdef")
Acked-By: Amir Vadai <amir@vadai.me>
Signed-off-by: David S. Miller <davem@davemloft.net>

Start address randomization and blinding in BPF currently use
prandom_u32(). prandom_u32() values are not exposed to unpriviledged
user space to my knowledge, but given other kernel facilities such as
ASLR, stack canaries, etc make use of stronger get_random_int(), we
better make use of it here as well given blinding requests successively
new random values. get_random_int() has minimal entropy pool depletion,
is not cryptographically secure, but doesn't need to be for our use
cases here.
Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver incorrectly uses dma_unmap_addr_set() to set
a variable which is in truth a dma_addr_t
[i.e not defined using DEFINE_DMA_UNMAP_ADDR()] and is
being used by the driver flows other than unmapping
physical addresses. This patch fixes driver fastpath
where CONFIG_NEED_DMA_MAP_STATE is not set.
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In my last commit I replaced MACSEC_SA_ATTR_KEYID by
MACSEC_SA_ATTR_KEY.

Fixes: 8acca6ac ("macsec: key identifier is 128 bits, not 64")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The length checks on the grant table copy_ops for setting hash key and
hash mapping are checking the local 'len' value which is correct in
the case of the former but not the latter. This was picked up by
static analysis checks.

This patch replaces checks of 'len' with 'copy_op.len' in both cases
to correct the incorrect check, keep the two checks consistent, and to
make it clear what the checks are for.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since e7f4dc35 ("mdio: Move allocation of interrupts into core"),
platforms which call fixed_phy_add() before fixed_mdio_bus_init() is
called (for example, because the platform code and the fixed_phy driver
use the same initcall level) crash in fixed_phy_add() since the
->mii_bus is not allocated.

Also since e7f4dc35, these interrupts are initalized to polling by
default.  The few (old) platforms which directly use fixed_phy_add()
from their platform code all pass PHY_POLL for the irq argument, so we
can keep these platforms not crashing by simply not attempting to set
the irq if PHY_POLL is passed.

Also, even if problems have not been reported on more modern platforms
which used fixed_phy_register() from drivers' probe functions, we return
-EPROBE_DEFER if the MDIO bus is not yet registered so that the probe is
retried later.

Fixes: e7f4dc35 ("mdio: Move allocation of interrupts into core")
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit e00be9e4.

It causes warnings and has several problems.
Signed-off-by: David S. Miller <davem@davemloft.net>

Antonio Quartulli says:

====================
During the Wireless Battle Mesh v9 in Porto (PT) at the beginning of
May, we managed to uncover and fix some important bugs in our
new B.A.T.M.A.N. V algorithm. These are the fixes we came up with
together with others that I collected in the past weeks:
- avoid potential crash due to NULL pointer dereference in
  B.A.T.M.A.N. V routine when a neigh_ifinfo object is not found, by
  Sven Eckelmann
- avoid use-after-free of skb when counting outgoing bytes, by Florian
  Westphal
- fix neigh_ifinfo object reference counting imbalance when using
  B.A.T.M.A.N. V, by Sven Eckelmann. Such imbalance may lead to the
  impossibility of releasing the related netdev object on shutdown
- avoid invalid memory access in case of error while allocating
  bcast_own_sum when a new hard-interface is added, by Sven Eckelmann
- ensure originator address is updated in OMG/ELP packet content upon
  primary interface address change, by Antonio Quartulli
- fix integer overflow when computing TQ metric (B.A.T.M.A.N. IV), by
  Sven Eckelmann
- avoid race condition while adding new neigh_node which would result
  in having two objects mapping to the same physical neighbour, by
  Linus Lüssing
- ensure originator address is initialized in ELP packet content on
  secondary interfaces, by Marek Lindner
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a patch to clean checkpatch warnings and errors
in the Space.c file.
Clean up the following warnings and errors.

WARNING :
* Block comments use * on subsequent lines
* Missing a blank line after declarations
* networking block comments don't use an empty /* line, use /*
* please, no space before tabs
* please, no spaces at the start of a line
* line over 80 characters

ERROR :
* code indent should use tabs where possible
* space prohibited after that open parenthesis '('
Signed-off-by: Amit Ghadge <amitg.b14@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
net: block BH in TCP callbacks

Four layers using TCP stack were assuming sk_callback_lock could
be locked using read_lock() in their handlers because TCP stack
was running with BH disabled.

This is no longer the case. Since presumably the rest could
also depend on BH being disabled, just use read_lock_bh().

Then each layer might consider switching to RCU protection
and no longer depend on BH.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

TCP stack can now run from process context.

Use read_lock_bh(&sk->sk_callback_lock) variant to restore previous
assumption.

Fixes: 5413d1ba ("net: do not block BH while processing socket backlog")
Fixes: d41a69f1 ("tcp: make tcp_sendmsg() aware of socket backlog")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TCP stack can now run from process context.

Use read_lock_bh(&sk->sk_callback_lock) variant to restore previous
assumption.

Fixes: 5413d1ba ("net: do not block BH while processing socket backlog")
Fixes: d41a69f1 ("tcp: make tcp_sendmsg() aware of socket backlog")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TCP stack can now run from process context.

Use read_lock_bh() variant to restore previous assumption.

Fixes: 5413d1ba ("net: do not block BH while processing socket backlog")
Fixes: d41a69f1 ("tcp: make tcp_sendmsg() aware of socket backlog")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

iscsi_sw_tcp_data_ready() and iscsi_sw_tcp_state_change() were
using read_lock(&sk->sk_callback_lock) which is fine if caller
disabled BH.

TCP stack no longer has this requirement and can run from
process context.

Use read_lock_bh() variant to restore previous assumption.

Ideally this code could use RCU instead...

Fixes: 5413d1ba ("net: do not block BH while processing socket backlog")
Fixes: d41a69f1 ("tcp: make tcp_sendmsg() aware of socket backlog")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Venkatesh Srinivas <venkateshs@google.com>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

(!count || count < 4) is always true.
So let's remove the coding which is dead at least since 2005.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

(a && a > 0) is equivalent to (a > 0).
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Only dereference variable self after checking it is not NULL.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

If DEBUG is defined, a superfluous closing brace
is introduced.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb_splice_bits() returns int, kcm_splice_read() returns ssize_t,
both are signed.

We may need another patch to make them all ssize_t, but that
deserves a separated patch.

Fixes: 91687355 ("kcm: Splice support")
Reported-by: David Binderman <linuxdev.baldrick@gmail.com>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ehea_get_port may return NULL. Do not dereference NULL value.

Fixes: 8c4877a4 ("ehea: Use the standard logging functions")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In function bgx_lmac_handler only use a member of
lmac after checking it is not null.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.7.  Here's the summary of
  the changes:

   - ATH79: Support for DTB passuing using the UHI boot protocol
   - ATH79: Remove support for builtin DTB.
   - ATH79: Add zboot debug serial support.
   - ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega
            and DPT-Module.
   - ATH79: Update devicetree clock support for AR9132 and AR9331.
   - ATH79: Cleanup the DT code.
   - ATH79: Support newer SOCs in ath79_ddr_ctrl_init.
   - ATH79: Fix regression in PCI window initialization.
   - BCM47xx: Move SPROM driver to drivers/firmware/
   - BCM63xx: Enable partition parser in defconfig.
   - BMIPS: BMIPS5000 has I cache filing from D cache
   - BMIPS: BMIPS: Add cpu-feature-overrides.h
   - BMIPS: Add Whirlwind support
   - BMIPS: Adjust mips-hpt-frequency for BCM7435
   - BMIPS: Remove maxcpus from BCM97435SVMB DTS
   - BMIPS: Add missing 7038 L1 register cells to BCM7435
   - BMIPS: Various tweaks to initialization code.
   - BMIPS: Enable partition parser in defconfig.
   - BMIPS: Cache tweaks.
   - BMIPS: Add UART, I2C and SATA devices to DT.
   - BMIPS: Add BCM6358 and BCM63268support
   - BMIPS: Add device tree example for BCM6358.
   - BMIPS: Improve Improve BCM6328 and BCM6368 device trees
   - Lantiq: Add support for device tree file from boot loader
   - Lantiq: Allow build with no built-in DT.
   - Loongson 3: Reserve 32MB for RS780E integrated GPU.
   - Loongson 3: Fix build error after ld-version.sh modification
   - Loongson 3: Move chipset ACPI code from drivers to arch.
   - Loongson 3: Speedup irq processing.
   - Loongson 3: Add basic Loongson 3A support.
   - Loongson 3: Set cache flush handlers to nop.
   - Loongson 3: Invalidate special TLBs when needed.
   - Loongson 3: Fast TLB refill handler.
   - MT7620: Fallback strategy for invalid syscfg0.
   - Netlogic: Fix CP0_EBASE redefinition warnings
   - Octeon: Initialization fixes
   - Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite
   - Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig
   - Octeon: Correctly handle endian-swapped initramfs images.
   - Octeon: Support CN73xx, CN75xx and CN78xx.
   - Octeon: Remove dead code from cvmx-sysinfo.
   - Octeon: Extend number of supported CPUs past 32.
   - Octeon: Remove some code limiting NR_IRQS to 255.
   - Octeon: Simplify octeon_irq_ciu_gpio_set_type.
   - Octeon: Mark some functions __init in smp.c
   - Octeon: Octeon: Add Octeon III CN7xxx interface detection
   - PIC32: Add serial driver and bindings for it.
   - PIC32: Add PIC32 deadman timer driver and bindings.
   - PIC32: Add PIC32 clock timer driver and bindings.
   - Pistachio: Determine SoC revision during boot
   - Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER.
   - Sibyte: Strip redundant comments from bcm1480_regs.h.
   - Panic immediately if panic_on_oops is set.
   - module: fix incorrect IS_ERR_VALUE macro usage.
   - module: Make consistent use of pr_*
   - Remove no longer needed work_on_cpu() call.
   - Remove CONFIG_IPV6_PRIVACY from defconfigs.
   - Fix registers of non-crashing CPUs in dumps.
   - Handle MIPSisms in new vmcore_elf32_check_arch.
   - Select CONFIG_HANDLE_DOMAIN_IRQ and make it work.
   - Allow RIXI to be used on non-R2 or R6 cores.
   - Reserve nosave data for hibernation
   - Fix siginfo.h to use strict POSIX types.
   - Don't unwind user mode with EVA.
   - Fix watchpoint restoration
   - Ptrace watchpoints for R6.
   - Sync icache when it fills from dcache
   - I6400 I-cache fills from dcache.
   - Various MSA fixes.
   - Cleanup MIPS_CPU_* definitions.
   - Signal: Move generic copy_siginfo to signal.h
   - Signal: Fix uapi include in exported asm/siginfo.h
   - Timer fixes for sake of KVM.
   - XPA TLB refill fixes.
   - Treat perf counter feature
   - Update John Crispin's email address
   - Add PIC32 watchdog and bindings.
   - Handle R10000 LL/SC bug in set_pte()
   - cpufreq: Various fixes for Longson1.
   - R6: Fix R2 emulation.
   - mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes
   - ELF: ABI and FP fixes.
   - Allow for relocatable kernel and use that to support KASLR.
   - Fix CPC_BASE_ADDR mask
   - Plenty fo smp-cps, CM, R6 and M6250 fixes.
   - Make reset_control_ops const.
   - Fix kernel command line handling of leading whitespace.
   - Cleanups to cache handling.
   - Add brcm, bcm6345-l1-intc device tree bindings.
   - Use generic clkdev.h header
   - Remove CLK_IS_ROOT usage.
   - Misc small cleanups.
   - CM: Fix compilation error when !MIPS_CM
   - oprofile: Fix a preemption issue
   - Detect DSP ASE v3 support:1"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits)
  MIPS: pic32mzda: fix getting timer clock rate.
  MIPS: ath79: fix regression in PCI window initialization
  MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs
  MIPS: Fix VZ probe gas errors with binutils <2.24
  MIPS: perf: Fix I6400 event numbers
  MIPS: DEC: Export `ioasic_ssr_lock' to modules
  MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC
  MIPS: CM: Fix compilation error when !MIPS_CM
  MIPS: Fix genvdso error on rebuild
  USB: ohci-jz4740: Remove obsolete driver
  MIPS: JZ4740: Probe OHCI platform device via DT
  MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant
  MIPS: pistachio: Determine SoC revision during boot
  MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435
  mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type
  MIPS: Prevent "restoration" of MSA context in non-MSA kernels
  MIPS: cevt-r4k: Dynamically calculate min_delta_ns
  MIPS: malta-time: Take seconds into account
  MIPS: malta-time: Start GIC count before syncing to RTC
  MIPS: Force CPUs to lose FP context during mode switches
  ...

Pull ARC updates from Vineet Gupta:
 "We have a relatively big changeset for ARC for 4.7.

  The highlight is support for EZChip (now Mellanox) NPS-400 network
  processor, a 400-Gb throughput C-programmable packet processor based
  on ARC700 cores from Synopsys. See

        http://www.mellanox.com/related-docs/prod_npu/PB_NPS-400.pdf

  Also present are irqchip and clocksource drivers for NPS as agreed
  with respective maintainers to go via ARC tree due to an soc header
  dependency.  I have the needed ACKs from Jason, Marc, Daniel.  You
  might run into a trivial merge conflict in drivers/irqchip/*

  This EZChip platform support required some deep changes in ARC
  architecture code and also opportunity to cleanup past sins (legacy
  irq domains, missing irq domain lookup, hard coded timer irqs...)

  Summary:

   - Support for EZChip (now Mellanox) NPS-400 Network processor based
     on ARC700

   - NPS interrupt controller and clocksource drivers

   - ARC timers probed off DT

   - ARC iqrchips switching to linear domain (upgrade from legacy
     domains)"

* tag 'arc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (37 commits)
  arc: axs103_smp: Fix CPU frequency to 100MHz for dual-core
  arc: axs10x: Add DT bindings for I2S PLL Clock
  ARC: pae: STRICT_MM_TYPECHECKS was broken
  ARC: Add eznps platform to Kconfig and Makefile
  ARC: [plat-eznps] Use dedicated COMMAND_LINE_SIZE
  ARC: [plat-eznps] Use dedicated cpu_relax()
  ARC: [plat-eznps] Use dedicated identity auxiliary register.
  ARC: [plat-eznps] Use dedicated SMP barriers
  ARC: [plat-eznps] Use dedicated atomic/bitops/cmpxchg
  ARC: [plat-eznps] Use dedicated user stack top
  ARC: [plat-eznps] Add eznps platform
  ARC: [plat-eznps] Add eznps board defconfig and dts
  ARC: Mark secondary cpu online only after all HW setup is done
  ARC: rwlock: disable interrupts in !LLSC variant
  ARC: Make vmalloc size configurable
  ARC: clean out UAPI byteorder.h clean off Kconfig symbol
  irqchip: add nps Internal and external irqchips
  clocksource: Add NPS400 timers driver
  soc: Support for EZchip SoC
  Documentation: Add EZchip vendor to binding list
  ...

Pull security subsystem updates from James Morris:
 "Highlights:

   - A new LSM, "LoadPin", from Kees Cook is added, which allows forcing
     of modules and firmware to be loaded from a specific device (this
     is from ChromeOS, where the device as a whole is verified
     cryptographically via dm-verity).

     This is disabled by default but can be configured to be enabled by
     default (don't do this if you don't know what you're doing).

   - Keys: allow authentication data to be stored in an asymmetric key.
     Lots of general fixes and updates.

   - SELinux: add restrictions for loading of kernel modules via
     finit_module().  Distinguish non-init user namespace capability
     checks.  Apply execstack check on thread stacks"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (48 commits)
  LSM: LoadPin: provide enablement CONFIG
  Yama: use atomic allocations when reporting
  seccomp: Fix comment typo
  ima: add support for creating files using the mknodat syscall
  ima: fix ima_inode_post_setattr
  vfs: forbid write access when reading a file into memory
  fs: fix over-zealous use of "const"
  selinux: apply execstack check on thread stacks
  selinux: distinguish non-init user namespace capability checks
  LSM: LoadPin for kernel file loading restrictions
  fs: define a string representation of the kernel_read_file_id enumeration
  Yama: consolidate error reporting
  string_helpers: add kstrdup_quotable_file
  string_helpers: add kstrdup_quotable_cmdline
  string_helpers: add kstrdup_quotable
  selinux: check ss_initialized before revalidating an inode label
  selinux: delay inode label lookup as long as possible
  selinux: don't revalidate an inode's label when explicitly setting it
  selinux: Change bool variable name to index.
  KEYS: Add KEYCTL_DH_COMPUTE command
  ...

Pull tracing updates from Steven Rostedt:
 "This includes two new updates for the ftrace infrastructure.

   - With the changing of the code for filtering events by pid, from a
     list of pids to a bitmask, we can now easily implement following
     forks.  With a new tracing option "event-fork" which, when set,
     will have tasks with pids in set_event_pid, when they fork, to have
     their child pids added to set_event_pid and the child will be
     traced as well.

     Note, if "event-fork" is set and a task with its pid in
     set_event_pid exits, its pid will be removed from set_event_pid

   - The addition of Tom Zanussi's hist triggers.  This includes a very
     thorough documentatino on how to use the hist triggers with events.
     This introduces a quick and easy way to get histogram data from
     events and their fields.

  Some other cleanups and updates were added as well.  Like Masami
  Hiramatsu added test cases for the event trigger and hist triggers.
  Also I added a speed up of filtering by using a temp buffer when
  filters are set"

* tag 'trace-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (45 commits)
  tracing: Use temp buffer when filtering events
  tracing: Remove TRACE_EVENT_FL_USE_CALL_FILTER logic
  tracing: Remove unused function trace_current_buffer_lock_reserve()
  tracing: Remove one use of trace_current_buffer_lock_reserve()
  tracing: Have trace_buffer_unlock_commit() call the _regs version with NULL
  tracing: Remove unused function trace_current_buffer_discard_commit()
  tracing: Move trace_buffer_unlock_commit{_regs}() to local header
  tracing: Fold filter_check_discard() into its only user
  tracing: Make filter_check_discard() local
  tracing: Move event_trigger_unlock_commit{_regs}() to local header
  tracing: Don't use the address of the buffer array name in copy_from_user
  tracing: Handle tracing_map_alloc_elts() error path correctly
  tracing: Add check for NULL event field when creating hist field
  tracing: checking for NULL instead of IS_ERR()
  tracing: Do not inherit event-fork option for instances
  tracing: Fix unsigned comparison to zero in hist trigger code
  kselftests/ftrace: Add a test for log2 modifier of hist trigger
  tracing: Add hist trigger 'log2' modifier
  kselftests/ftrace: Add hist trigger testcases
  kselftests/ftrace : Add event trigger testcases
  ...

Pull audit updates from Paul Moore:
 "Four small audit patches for 4.7.

  Two are simple cleanups around the audit thread management code, one
  adds a tty field to AUDIT_LOGIN events, and the final patch makes
  tty_name() usable regardless of CONFIG_TTY.

  Nothing controversial, and it all passes our regression test"

* 'stable-4.7' of git://git.infradead.org/users/pcmoore/audit:
  tty: provide tty_name() even without CONFIG_TTY
  audit: add tty field to LOGIN event
  audit: we don't need to __set_current_state(TASK_RUNNING)
  audit: cleanup prune_tree_thread

Pull remoteproc updates from Bjorn Andersson:
 "Introduce a synchronization point between the async firmware loading
  and clients requesting the remote processor to boot, as well as
  support for remote processors that are not interested in the resource
  table information"

* tag 'rproc-v4.7' of git://github.com/andersson/remoteproc:
  remoteproc: Add additional crash reasons
  remoteproc: core: Make the loaded resource table optional
  remoteproc: core: Task sync during rproc_fw_boot()

Pull rpmsg updates from Bjorn Andersson:
 "Refactor rpmsg module registration to follow other subsystems; by
  introduction of module_rpmsg_driver and hiding of THIS_MODULE from
  clients"

* tag 'rpmsg-v4.7' of git://github.com/andersson/remoteproc:
  rpmsg: use module_rpmsg_driver in existing drivers and examples
  rpmsg: add helper macro module_rpmsg_driver
  rpmsg: drop owner assignment from rpmsg_drivers
  rpmsg: add THIS_MODULE to rpmsg_driver in rpmsg core

Pull input updates from Dmitry Torokhov:
 "First round of updates for the input subsystem.  No new drivers here,
  just some driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: rotary-encoder - fix bare use of 'unsigned'
  Input: cm109 - spin_lock in complete() cleanup
  Input: cm109 - fix handling of volume and mute buttons
  Input: byd - don't wipe dynamically allocated memory twice
  Input: twl4030 - fix unsafe macro definition
  Input: twl6040-vibra - remove mutex
  Input: bcm_iproc_tsc - DT spelling s/clock-name/clock-names/
  Input: bcm_iproc_tsc - use syscon to access shared registers
  Input: ti_am335x_tsc - use SIMPLE_DEV_PM_OPS
  Input: omap-keypad - remove set_col_gpio_val() and get_row_gpio_val()
  Input: omap-keypad - drop empty PM stubs
  Input: omap-keypad - remove adjusting of scan delay
  Input: gpio-keys - clean up device tree binding example
  Input: kbtab - stop saving struct usb_device
  Input: gtco - stop saving struct usb_device
  Input: aiptek - stop saving struct usb_device
  Input: acecad - stop saving struct usb_device

Pull media updates from Mauro Carvalho Chehab:
 - added support for Intersil/Techwell TW686x-based video capture cards
 - v4l PCI skeleton driver moved to samples directory
 - Documentation cleanups and improvements
 - RC: reduced the memory footprint for IR raw events
 - tpg: Export the tpg code from vivid as a module
 - adv7180: Add device tree binding documentation
 - lots of driver improvements and fixes

* tag 'media/v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (173 commits)
  [media] exynos-gsc: avoid build warning without CONFIG_OF
  [media] samples: v4l: from Documentation to samples directory
  [media] dib0700: add USB ID for another STK8096-PVR ref design based card
  [media] tvp5150: propagate I2C write error in .s_register callback
  [media] tvp5150: return I2C write operation failure to callers
  [media] em28xx: add support for Hauppauge WinTV-dualHD DVB tuner
  [media] em28xx: add missing USB IDs
  [media] update cx23885 and em28xx cardlists
  [media] media: au0828 fix au0828_v4l2_device_register() to not unlock and free
  [media] c8sectpfe: Rework firmware loading mechanism
  [media] c8sectpfe: Demote print to dev_dbg
  [media] c8sectpfe: Fix broken circular buffer wp management
  [media] media-device: Simplify compat32 logic
  [media] media: i2c: ths7303: remove redundant assignment on bt
  [media] dvb-usb: hide unused functions
  [media] xilinx-vipp: remove unnecessary of_node_put
  [media] drivers/media/media-devnode: clear private_data before put_device()
  [media] drivers/media/media-device: move debug log before _devnode_unregister()
  [media] drivers/media/rc: postpone kfree(rc_dev)
  [media] media/dvb-core: forward media_create_pad_links() return value
  ...

Pull SCSI updates from James Bottomley:
 "First round of SCSI updates for the 4.6+ merge window.

  This batch includes the usual quota of driver updates (bnx2fc, mp3sas,
  hpsa, ncr5380, lpfc, hisi_sas, snic, aacraid, megaraid_sas).  There's
  also a multiqueue update for scsi_debug, assorted bug fixes and a few
  other minor updates (refactor of scsi_sg_pools into generic code, alua
  and VPD updates, and struct timeval conversions)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (138 commits)
  mpt3sas: Used "synchronize_irq()"API to synchronize timed-out IO & TMs
  mpt3sas: Set maximum transfer length per IO to 4MB for VDs
  mpt3sas: Updating mpt3sas driver version to 13.100.00.00
  mpt3sas: Fix initial Reference tag field for 4K PI drives.
  mpt3sas: Handle active cable exception event
  mpt3sas: Update MPI header to 2.00.42
  Revert "lpfc: Delete unnecessary checks before the function call mempool_destroy"
  eata_pio: missing break statement
  hpsa: Fix type ZBC conditional checks
  scsi_lib: Decode T10 vendor IDs
  scsi_dh_alua: do not fail for unknown VPD identification
  scsi_debug: use locally assigned naa
  scsi_debug: uuid for lu name
  scsi_debug: vpd and mode page work
  scsi_debug: add multiple queue support
  bfa: fix bfa_fcb_itnim_alloc() error handling
  megaraid_sas: Downgrade two success messages to info
  cxlflash: Fix to resolve dead-lock during EEH recovery
  scsi_debug: rework resp_report_luns
  scsi_debug: use pdt constants
  ...

Pull iscsi_ibft updates from Konrad Rzeszutek Wilk:
 "The pull has two features - both of them expand the SysFS entries:

   - 'prefix-len' - which is subnet_mask_prefix of the iBFT header.

   - 'acpi_header' dir with: 'iBFT', OEM-ID (whatever it extracts from
     the iBFT header) and OEM_TABLE_ID (also whatever it extracts from
     the iBFT header).  This is to help NIC drivers to figure out during
     bootup how to deal with BIOS created iBFT tables (like by TianoCore
     UEFI implemenation)"

* 'stable/for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
  ibft: Expose iBFT acpi header via sysfs
  iscsi_ibft: Add prefix-len attr and display netmask

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs, these contain various things that touch
  the drivers/ directory but got merged through arm-soc for practical
  reasons.

  For the most part, this is now related to power management
  controllers, which have not yet been abstracted into a separate
  subsystem, and typically require some code in drivers/soc or arch/arm
  to control the power domains.

  Another large chunk here is a rework of the NVIDIA Tegra USB3.0
  support, which was surprisingly tricky and took a long time to get
  done.

  Finally, reset controller handling as always gets merged through here
  as well"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
  arm-ccn: Enable building as module
  soc/tegra: pmc: Add generic PM domain support
  usb: xhci: tegra: Add Tegra210 support
  usb: xhci: Add NVIDIA Tegra XUSB controller driver
  dt-bindings: usb: xhci-tegra: Add Tegra210 XUSB controller support
  dt-bindings: usb: Add NVIDIA Tegra XUSB controller binding
  PCI: tegra: Support per-lane PHYs
  dt-bindings: pci: tegra: Update for per-lane PHYs
  phy: tegra: Add Tegra210 support
  phy: Add Tegra XUSB pad controller support
  dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support
  dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding
  phy: core: Allow children node to be overridden
  clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs
  drivers: firmware: psci: make two helper functions inline
  soc: renesas: rcar-sysc: Add support for R-Car H3 power areas
  soc: renesas: rcar-sysc: Add support for R-Car E2 power areas
  soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas
  soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas
  soc: renesas: rcar-sysc: Add support for R-Car H2 power areas
  ...

Pull ARM SoC defconfig updates from Arnd Bergmann:
 "As usual, a bunch of commits, mostly adding drivers and other options
  to defconfigs.

  We are adding three new defconfig files for the newly added 32-bit
  machines (aspeed and mps2), the rest is mainly housekeeping.

  The changes outside of arch/arm/config/ are for a Kconfig symbol that
  got renamed"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (63 commits)
  ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME
  ARM: u8500_defconfig: update sensor config
  ARM: u8500_defconfig: remove staging from defconfig
  ARM: multi_v7_defconfig: Remove unused Kconfig option MACH_UX500_DT
  ARM: at91/defconfig: sama5: add CONFIG_FHANDLE
  arm/configs: Add Aspeed defconfig
  arm/configs/multi_v5: Add Aspeed ast2400
  ARM: at91: sama5: Update defconfig
  ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY
  ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO
  ARM: multi_v7: Enable Tegra XUSB controller in defconfig
  ARM: tegra: Enable XUSB controller in defconfig
  ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules
  ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driver
  ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMIC
  ARM: multi_v7_defconfig: add Atmel ISI (Image Sensor Interface) driver
  ARM: multi_v7_defconfig: add Atmel watchdog timers
  ARM: multi_v7_defconfig: add HLCDC drivers as modules
  ARM: at91/defconfig: add PDMIC driver to sama5_defconfig
  ARM: at91/defconfig: add HLCDC driver to sama5_defconfig
  ...

Pull ARM 64-bit DT updates from Arnd Bergmann:
 "We continue ramping up platform support for 64-bit ARM machines, with
  111 individual non-merge changesets touching 21 platforms.

  The LG1312 platform is completely new and is the first ARM platform by
  LG that we support in the mainline kernel.  Two other SoCs got added
  that are updated versions of existing SoC families, so the port mainly
  consists of new dts files:

   - The Hisilicon Hip06/D03 is the latest server platform from
     Huawei/Hisilicon, and follows the Hip05/D02 platform.

   - Rockchip RK3399 follows the 32-bit RK3288 that is popular in
     low-end Chromebooks and the 64-bit RK3368 that is mainly found in
     chinese Android TV boxes.

  The 96Boards HiKey based on the Hisilicon Hi6220 (Kirin 620) gets a
  long-awaited overhaul with a lot of devices enabled in the DT, so it
  should be much more usable with a mainline kernel now.  See also

     https://plus.google.com/111524780435806926688/posts/PeGb2VsNhJd

  A lot of work went into enabling new device drivers on existing
  machines, but we also have a couple of new commercially available
  machines:

   - Google Pixel C laptop based on Tegra210
   - Hardkernel Odroid C2 Based on Amlogic Meson GXBB (S905)
   - Geekbuying GeekBox based on Rockchip RK3368

  And finally, a couple of reference or development platforms that are
  not end-user platforms but are used for trying out the respective SoC
  platforms:

   - Amlogic Meson GXBB P200 and P201 development systems
   - NXP Layerscape 1043A QDS development board
   - Hisilicon Hip06 D03 server board, as mentioned above
   - LG1312 Reference Design
   - RK3399 Evaluation Board"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (104 commits)
  arm64: dts: marvell: add XOR node for Armada 3700 SoC
  dt-bindings: document rockchip rk3399-evb board
  arm64: dts: rockchip: add dts file for RK3399 evaluation board
  arm64: dts: rockchip: add core dtsi file for RK3399 SoCs
  dt-bindings: rockchip-dw-mshc: add description for rk3399
  arm64: dts: marvell: Use a SoC-specific compatible for xHCI on Armada37xx
  arm64: dts: marvell: Rename armada-37xx USB node
  arm64: dts: marvell: Clean up armada-3720-db
  Documentation: arm64: Add Hisilicon Hip06 D03 dts binding
  arm64: dts: Add initial dts for Hisilicon Hip06 D03 board
  arm64: dts: hip05: Add nor flash support
  arm64: dts: hip05: fix its node without msi-cells
  arm64: dts: r8a7795: Don't disable referenced optional clocks
  arm64: dts: salvator-x: populate EXTALR
  arm64: dts: r8a7795: enable PCIe on Salvator-X
  arm64: dts: r8a7795: Add PCIe nodes
  arm64: tegra: Add IOMMU node to GM20B on Tegra210
  arm64: tegra: Add reference clock to GM20B on Tegra210
  dt-bindings: Add documentation for GM20B GPU
  dt-bindings: gk20a: Document iommus property
  ...

Pull ARM DT updates from Arnd Bergmann:
 "These are all the updates to device tree files for 32-bit platforms,
  which as usual makes up the bulk of the ARM SoC changes: 462 non-merge
  changesets, 450 files changed, 23340 insertions, 5216 deletions.

  The three platforms that are added with the "soc" branch are here as
  well, and we add some related machine files:

   - For Aspeed AST2400/AST2500, we get the evaluation platform and the
     Tyan Palmetto POWER8 mainboard that uses the AST2400 BMC
   - For Oxnas 810SE, the Western Digital "My Book World Edition" is
     added as the only platform at the moment.
   - For ARM MPS2, the AN385 (Cortex-M3) and AN399 (Cortex-M7) are
     supported

  On the ARM Realview development platform, we now support all machines
  with device tree, previously only the board files were supported,
  which in turn will likely be removed soon.

  Qualcomm IPQ4019 is the second generation ARM based "Internet
  Processor", following the IPQ806x that is used in many high-end WiFi
  routers.  This one integrates two ath10k wifi radios that were
  previously on separate chips.

  Other boards that got added for existing chips are:

  Ti OMAP family:
     - Amazon Kindle Fire, first generation, tablet and ebook reader
     - OnRISC Baltos iR 2110 and 3220 embedded industrial PCs
     - TI AM5728 IDK, TI AM3359 ICE-V2, and TI DRA722 Rev C EVM
       development systems

  Samsung EXYNOS platform:
     - Samsung ARTIK5 evaluation board, see

        https://www.artik.io/modules/overview/artik-5/

  NXP i.MX platforms:
     - Ka-Ro electronics TX6S-8034, TX6S-8035, TX6U-8033, TX6U-81xx,
       TX6Q-1036, TX6Q-1110/-1130, TXUL-0010 and TXUL-0011 industrial
       SoM modules
     - Embest MarS Board i.MX6Dual DIY platform
     - Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX and SoloX
       Nitrogen6sx embedded boards
     - Technexion Pico i.MX6UL compute module
     - ZII VF610 Development Board

  Marvell embedded (mvebu, orion, kirkwood) platforms:
     - Linksys Viper (E4200v2 / EA4500) WiFi router
     - Buffalo Kurobox Pro NAS

  Qualcomm Snapdragon:
     - Arrow DragonBoard 600c (96boards) with APQ8064 Snapdragon 600

  Rockchips platform:
     - mqmaker MiQi single-board computer

  Altera SoCFPGA:
     - samtec VIN|ING 1000 vehicle communication interface

  Allwinner Sunxi platforms:
     - Dserve DSRV9703C tablet
     - Difrnce DIT4350 tablet
     - Colorfly E708 Q1 tablet
     - Polaroid MID2809PXE04 tablet
     - Olimex A20 OLinuXino LIME2 single board computer
     - Xunlong Orange Pi 2, Orange Pi One, and Orange Pi PC single board
       computers

  Across many platforms, bug fixes went in to address warnings that dtc
  now emits with 'make dtbs W=1'.  Further changes for device enablement
  went into Ti OMAP, bcm283x (Raspberry Pi), bcm47xx (wifi router), Ti
  Davinci, Samsung EXYNOS, Marvell mvebu/kirkwood/orion, NXP i.MX/Vybrid
  NXP LPC18xx, NXP LPC32xx, Renesas shmobile/r-mobile/r-car, Rockchips
  rk3xxx, ST Ux500, ST STi, Atmel AT91/SAMA5, Altera SoCFPGA, Allwinner
  Sunxi, Sigma Designs Tango, NVIDIA Tegra, Socionext Uniphier and ARM
  Versatile Express"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (458 commits)
  ARM: dts: tango4: Import watchdog node
  ARM: dts: tango4: Update cpus node for cpufreq
  ARM: dts: tango4: Update DT to match clk driver
  ARM: dts: tango4: Initial thermal support
  arm/dst: Add Aspeed ast2500 device tree
  arm/dts: Add Aspeed ast2400 device tree
  ARM: sun7i: dt: Add pll3 and pll7 clocks
  ARM: dts: sunxi: Add a olinuxino-lime2-emmc
  ARM: dts: at91: sama5d4: add trng node
  ARM: dts: at91: sama5d3: add trng node
  ARM: dts: at91: sama5d2: add trng node
  ARM: dts: at91: at91sam9g45 family: reduce the trng register map size
  ARM: sun4i: dt: Add pll3 and pll7 clocks
  ARM: sun5i: chip: Enable the TV Encoder
  ARM: sun5i: r8: Add display blocks to the DTSI
  ARM: sun5i: a13: Add display and TCON clocks
  ARM: dts: ux500: configure the accelerometers open drain
  ARM: mx5: dts: Enable USB OTG on M53EVK
  ARM: dts: imx6ul-14x14-evk: Add audio support
  ARM: dts: imx6qdl: Remove unneeded unit-addresses
  ...

Pull ARM SoC 64-bit changes from Arnd Bergmann:
 "One new platform gets added this time: The Cortex-A53 based LG
  Electronics LG1K platform used in digital TVs.

  The other changes are mostly smaller updates to the defconfig files,
  to enable additional platform specific drivers, as they get merged
  through the subsystem trees"

* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: configs: add options useful for Armada 7K/8K support
  arm64: defconfig: Add Juno SATA controller
  arm64: defconfig: enable freescale/nxp config options
  arm64: defconfig: enable 48-bit virtual addresses
  arm64: defconfig: cleanup the defconfig
  MAINTAINERS: update entry for Marvell ARM platform maintainers
  arm64: marvell: enable AP806 and CP110 syscon driver
  arm64: Kconfig: select sp804 timer for ARCH_HISI
  arm64: defconfig: enable configs for WLAN and TI WL1835 as modules
  arm64: defconfig: enable several common USB network adapters
  arm64: defconfig: add CONFIG_SPI_SPIDEV as module
  arm64: defconfig: Enable the PMIC and regulator for Hi6220 and 96boards HiKey
  arm64: defconfig: Add Renesas R-Car USB 3.0 driver support
  MAINTAINERS: add Chanho Min as ARM/LG1K maintainer
  arm64: defconfig: enable ARCH_LG1K
  arm64: add Kconfig entry for LG1K SoC family
  arm64: defconfig: Enable PL330 DMA controller
  arm64: defconfig: enable basic boot for Amlogic meson

Pull ARM SoC platform updates from Arnd Bergmann:
 "We get support for three new 32-bit SoC platforms this time.

  The amount of changes in arch/arm for any of them is miniscule, as all
  the interesting code is in device driver subsystems (irqchip, clk,
  pinctrl, ...) these days.  I'm listing them here, as the addition of
  the Kconfig statement is the main relevant milestone for a new
  platform.  In each case, some drivers are are shared with existing
  platforms, while other drivers are added for v4.7 as well, or come in
  a later release.

   - The Aspeed platform is probably the most interesting one, this is
     what most whitebox servers use as their baseboard management
     controller.  We get support for the very common ast2400 and ast2500
     SoCs.  The OpenBMC project focuses on this chip, and the LWN
     article about their ELC 2016 presentation at

        https://lwn.net/Articles/683320/

     triggered the submission, but the code comes from IBM's OpenPOWER
     team rather than the team at Facebook.  There are still a lot more
     drivers that need to get added over time, and I hope both teams can
     work together on that.

   - OXNAS is an old platform for Network Attached Storage devices from
     Oxford Semiconductor.  There are models with ARM10 (!) and
     ARM11MPCore cores, but for now, we only support the original ARM9
     based versions.  The product lineup was subsequently part of PLX,
     Avago and now the new Broadcom Ltd.

        https://wiki.openwrt.org/doc/hardware/soc/soc.oxnas

     has some more information.

   - V2M-MPS2 is a prototyping platform from ARM for their Cortex-M
     cores and is related to the existing Realview / Versatile Express
     lineup, but without MMU.

     We now support various NOMMU platforms, so adding a new one is
     fairly straightforward.

        http://infocenter.arm.com/help/topic/com.arm.doc.100112_0100_03_en/

     has detailed information about the platform.

  Other noteworthy updates:

   - Work on LPC32xx has resumed, and Vladimir Zapolskiy and Sylvain
     Lemieux are now maintaining the platform.

     This is an older ARM9 based platform from NXP (not Freescale), but
     it remains in use in embedded markets.

   - Kevin Hilman is now co-maintaining the Amlogic Meson platform for
     both 32-bit and 64-bit ARM, and started contributing some patches.

   - As is often the case, work on the OMAP platforms makes up the bulk
     of the actual SoC code changes in arch/arm, but there isn't a lot
     of that either"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
  MAINTAINERS: ARM/Amlogic: add co-maintainer, misc. updates
  MAINTAINERS: add ARM/NXP LPC32XX SoC specific drivers to the section
  MAINTAINERS: add new maintainers of NXP LPC32xx SoC
  MAINTAINERS: move ARM/NXP LPC32xx record to ARM section
  arm: Add Aspeed machine
  ARM: lpc32xx: remove duplicate const on lpc32xx_auxdata_lookup
  ARM: lpc32xx: remove leftovers of legacy clock source and provider drivers
  ARM: lpc32xx: remove reboot header file
  ARM: dove: Remove CLK_IS_ROOT
  ARM: orion5x: Remove CLK_IS_ROOT
  ARM: mv78xx0: Remove CLK_IS_ROOT
  ARM: davinci: da850: use clk->set_parent for async3
  ARM: davinci: Move clock init after ioremap.
  MAINTAINERS: Update ARM Versatile Express platform entry
  ARM: vexpress/mps2: introduce MPS2 platform
  MAINTAINERS: add maintainer entry for ARM/OXNAS platform
  ARM: Add new mach-oxnas
  irqchip: versatile-fpga: add new compatible for OX810SE SoC
  ARM: uniphier: correct the call order of of_node_put()
  MAINTAINERS: fix stale TI DaVinci entries
  ...

Pull ARM SoC cleanups and fixes from Arnd Bergmann:
 "Traditionally we've had two separate branches for cleanups and
  non-critical bug fixes, but both of these got smaller with each
  release and the differences are rather unclear now, so it seems more
  appropriate to have a combined branch.

  The most notable change is for OMAP, which gets a small rework to
  simplify handling of the AUXDATA mechanism used on machines that are
  not completely DT based yet, along with other work that is used as
  preparation for dropping the legacy board files"

* tag 'armsoc-cleanups-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: exynos: Add interrupt line to MAX8997 PMIC on exynos4210-trats
  ARM: dts: exynos: Fix regulator name to avoid forbidden character on exynos4210-trats
  ARM: dts: exynos: Add MFC memory banks for Peach boards
  ARM: OMAP2+: n900 needs MMC slot names for legacy user space
  ARM: OMAP2+: Add more functions to pwm pdata for ir-rx51
  ARM: debug: remove extraneous DEBUG_HI3716_UART option
  ARM: OMAP2+: Simplify auxdata by using the generic match
  of/platform: Allow secondary compatible match in of_dev_lookup
  ARM: davinci: use IRQCHIP_DECLARE for cp_intc
  ARM: davinci: remove unused DA8XX_NUM_UARTS
  ARM: davinci: simplify call to of populate
  ARM: DaVinci USB: removed deprecated properties from MUSB config
  ARM: rockchip: Fix use of plain integer as NULL pointer
  ARM: realview: hide unused 'pmu_device' object
  soc: versatile: dynamically detect RealView HBI numbers