- 30 May, 2012 23 commits
-
-
Stefan Behrens authored
An ioctl interface is added to get the device statistic counters. A second ioctl is added to atomically get and reset these counters. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
-
Stefan Behrens authored
The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
-
Asias He authored
1) This function is not used anywhere. 2) Using the blk_abort_queue() to abort the queue seems not correct. blk_abort_queue() is used for timeout handling (block/blk-timeout.c). Cc: Chris Mason <chris.mason@oracle.com> Cc: linux-btrfs@vger.kernel.org Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-kernel@vger.kernel.org Signed-off-by: Asias He <asias@redhat.com>
-
Miao Xie authored
Two files in the different subvolumes may have the same inode id, so The rb-tree which is used to manage the defragment object must take it into account. This patch fix this problem. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
-
Josef Bacik authored
If cow_file_range_inline fails with ENOSPC we abort the transaction which isn't very nice. This really shouldn't be happening anyways but there's no sense in making it a horrible error when we can easily just go allocate normal data space for this stuff. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
Ceph was hitting this race where we would remove an inode from the per-root orphan list before we would release the space we had reserved for the inode. We actually don't need a list or anything, we just need to make sure the root doesn't try to free up the orphan reserve until after the inodes have released their reservations. So use an atomic counter instead of a list on the root and only decrement the counter after we've released our reservation. I've tested this as well as several others and we no longer see the warnings that you would see while running ceph. Thanks, Btrfs: fix how we deal with the orphan block rsv Ceph was hitting this race where we would remove an inode from the per-root orphan list before we would release the space we had reserved for the inode. We actually don't need a list or anything, we just need to make sure the root doesn't try to free up the orphan reserve until after the inodes have released their reservations. So use an atomic counter instead of a list on the root and only decrement the counter after we've released our reservation. I've tested this as well as several others and we no longer see the warnings that you would see while running ceph. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
Miao pointed this out while I was working on an orphan problem that messing with a bitfield where different ranges are protected by different locks doesn't work out right. Turns out we've been doing this forever where we have different parts of the bit field protected by either no lock at all or different locks which could cause all sorts of weird problems including the issue I was hitting. So instead make a runtime_flags thing that we use the normal bit operations on that are all atomic so we can keep having our no/different locking for the different flags and then make force_compress it's own thing so it can be treated normally. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
When we write out the free space cache we will write out everything that is in our in memory tree, and then we will just walk the pinned extents tree and write anything we see there. The problem with this is that during normal operations the pinned extents will be merged back into the free space tree normally, and then we can allocate space from the merged areas and commit them to the tree log. If we crash and replay the tree log we will crash again because the tree log will try to free up space from what looks like 2 seperate but contiguous entries, since one entry is from the original free space cache and the other was a pinned extent that was merged back. To fix this we just need to walk the free space tree after we load it and merge contiguous entries back together. This will keep the tree log stuff from breaking and it will make the allocator behave more nicely. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
-
Liu Bo authored
In normal cases, we would not be allowed to do balance in RO mode. However, when we're using a seeding device and adding another device to sprout, things will change: $ mkfs.btrfs /dev/sdb7 $ btrfstune -S 1 /dev/sdb7 $ mount /dev/sdb7 /mnt/btrfs -o ro $ btrfs fi bal /mnt/btrfs -----------------------> fail. $ btrfs dev add /dev/sdb8 /mnt/btrfs $ btrfs fi bal /mnt/btrfs -----------------------> works! It should not be designed as an exception, and we'd better add another check for mnt flags. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Reviewed-by: Josef Bacik <josef@redhat.com>
-
Liu Bo authored
Fully utilize our extent state's new helper functions to use fastpath as much as possible. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Reviewed-by: Josef Bacik <josef@redhat.com>
-
Liu Bo authored
Reproduce: $ mkfs.btrfs /dev/sdb7 $ mount /dev/sdb7 /mnt/btrfs -o ro $ btrfs dev add /dev/sdb8 /mnt/btrfs ERROR: error adding the device '/dev/sdb8' - Invalid argument Since we mount with readonly options, and /dev/sdb7 is not a seeding one, a readonly notification is preferred. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Reviewed-by: Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
We noticed that the ordered extent completion doesn't really rely on having a page and that it could be done independantly of ending the writeback on a page. This patch makes us not do the threaded endio stuff for normal buffered writes and direct writes so we can end page writeback as soon as possible (in irq context) and only start threads to do the ordered work when it is actually done. Compression needs to be reworked some to take advantage of this as well, but atm it has to do a find_get_page in its endio handler so it must be done in its own thread. This makes direct writes quite a bit faster. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
We are checking delalloc to see if it is ok to update the i_size. There are 2 cases it stops us from updating 1) If there is delalloc between our current disk_i_size and this ordered extent 2) If there is delalloc between our current ordered extent and the next ordered extent These tests are racy however since we can set delalloc for these ranges at any time. Also for the first case if we notice there is delalloc between disk_i_size and our ordered extent we will not update disk_i_size and assume that when that delalloc bit gets written out it will update everything properly. However if we crash before that we will have file extents outside of our i_size, which is not good, so this test is dangerous as well as racy. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
-
Jim Meyering authored
There is an off-by-one error: allocating room for a maximal result string but without room for a trailing NUL. That, can lead to returning a transformed string that is not NUL-terminated, and then to a caller reading beyond end of the malloc'd buffer. Rewrite to s/kzalloc/kmalloc/, remove unwarranted use of strncpy (the result is guaranteed to fit), remove dead strlen at end, and change a few variable names and comments. Reviewed-by: Josef Bacik <josef@redhat.com> Signed-off-by: Jim Meyering <meyering@redhat.com>
-
Jim Meyering authored
A device with name of length BTRFS_DEVICE_PATH_NAME_MAX or longer would not be NUL-terminated in the DEV_INFO ioctl result buffer. Signed-off-by: Jim Meyering <meyering@redhat.com>
-
Jim Meyering authored
The buffer read-overrun would be triggered by a printk format starting with <N>, where N is a single digit. NUL-terminate after strncpy. Use memcpy, not strncpy, since we know the string we're copying fits in the destination buffer and contains no NUL byte. Signed-off-by: Jim Meyering <meyering@redhat.com>
-
Daniel J Blueman authored
Address some minor type issues identified by sparse checker. Signed-off-by: Daniel J Blueman <daniel@quora.org>
-
Sergei Trofimovich authored
Changing 'mount -oremount,thread_pool=2 /' didn't make any effect: maximum amount of worker threads is specified in 2 places: - in 'strict btrfs_fs_info::thread_pool_size' - in each worker struct: 'struct btrfs_workers::max_workers' 'mount -oremount' updated only 'btrfs_fs_info::thread_pool_size'. Fix it by pushing new maximum value to all created worker structures as well. Cc: Josef Bacik <josef@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Reviewed-by: Josef Bacik <josef@redhat.com> Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
-
Josef Bacik authored
We already do the btrfs_wait_ordered_range which will do this for us, so just remove this call so we don't call it twice. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
In btrfs_wait_ordered_range we have been calling filemap_fdata_write() twice because compression does strange things and then waiting. Then we look up ordered extents and if we find any we will always schedule_timeout(); once and then loop back around and do it all again. We will even check to see if there is delalloc pages on this range and loop again. So this patch gets rid of the multipe fdata_write() calls and just does filemap_write_and_wait(). In the case of compression we will still find the ordered extents and start those individually if we need to so that is ok, but in the normal buffered case we avoid all this weird overhead. Then in the case of the schedule_timeout(1), we don't need it. All callers either 1) don't care, they just want to make sure what they just wrote maeks it to disk or 2) are doing the lock()->lookup ordered->unlock->flush thing in which case it will lock and check for ordered extents _anyway_ so get back to them as quickly as possible. The delaloc check is simply not needed, this only catches the case where we write to the file again since doing the filemap_write_and_wait() and if the caller truly cares about that it will take care of everything itself. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
These warnings are bogus since we will always have at least one page in an eb, but to make the compiler happy just set ret = 0 in these two cases. Thanks, Btrfs: fix compile warnings in extent_io.c These warnings are bogus since we will always have at least one page in an eb, but to make the compiler happy just set ret = 0 in these two cases. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
When running compilebench I noticed we were spending some time looking up acls on new inodes, which shouldn't be happening since there were no acls. This is because when we init acls on the inode after creating them we don't cache the fact there are no acls if there aren't any. Doing this adds a little bit of a bump to my compilebench runs. Thanks, Btrfs: cache no acl on new inodes Signed-off-by: Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
We've been keeping around the inode sequence number in hopes that somebody would use it, but nobody uses it and people actually use i_version which serves the same purpose, so use i_version where we used the incore inode's sequence number and that way the sequence is updated properly across the board, and not just in file write. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
-
- 11 May, 2012 7 commits
-
-
Dan Carpenter authored
It confuses Smatch that we use two names for the same lock. Plus the shorter name is nicer. This doesn't change how the code works, it's just a cleanup. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
-
Stefan Behrens authored
The integrity checker used to be coded for nodesize == leafsize == sectorsize == PAGE_CACHE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_CACHE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
-
Wang Sheng-Hui authored
In tree_insert, var *entry is used in the loop only, and is useless out of the loop. Remove the useless assignment after the loop. Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
-
Wang Sheng-Hui authored
The return value of find_first_extent_bit is 1 or 0, no < 0. And if found something, return 0; if nothing was found, return 1. Fix the comment. Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
-
Wang Sheng-Hui authored
num_extent_pages returns the number of pages in the specific range, not the index of the last page in the eb range. btrfs_release_extent_buffer_page is called with start_idx set 0 in current codes, so it's not a problem yet. But the logic is indeed wrong. Fix it here. Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
-
Wang Sheng-Hui authored
No 'delete' arg is used for clear_state_bit. Cleanup the comment. Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
-
Wang Sheng-Hui authored
The code path should not reach there. Remove it. Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
-
- 06 May, 2012 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes form Peter Anvin * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: intel_mid_powerbtn: mark irq as IRQF_NO_SUSPEND arch/x86/platform/geode/net5501.c: change active_low to 0 for LED driver x86, relocs: Remove an unused variable asm-generic: Use __BITS_PER_LONG in statfs.h x86/amd: Re-enable CPU topology extensions in case BIOS has disabled it
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "The big ones here are a memory leak we introduced in rc1, and a scheduling while atomic if the transid on disk doesn't match the transid we expected. This happens for corrupt blocks, or out of date disks. It also fixes up the ioctl definition for our ioctl to resolve logical inode numbers. The __u32 was a merging error and doesn't match what we ship in the progs." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: avoid sleeping in verify_parent_transid while atomic Btrfs: fix crash in scrub repair code when device is missing btrfs: Fix mismatching struct members in ioctl.h Btrfs: fix page leak when allocing extent buffers Btrfs: Add properly locking around add_root_to_dirty_list
-
Al Viro authored
Setting TIF_IA32 in load_aout_binary() used to be enough; these days TASK_SIZE is controlled by TIF_ADDR32 and that one doesn't get set there. Switch to use of set_personality_ia32()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Chris Mason authored
verify_parent_transid needs to lock the extent range to make sure no IO is underway, and so it can safely clear the uptodate bits if our checks fail. But, a few callers are using it with spinlocks held. Most of the time, the generation numbers are going to match, and we don't want to switch to a blocking lock just for the error case. This adds an atomic flag to verify_parent_transid, and changes it to return EAGAIN if it needs to block to properly verifiy things. Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
- 05 May, 2012 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alphaLinus Torvalds authored
Pull alpha fixes from Matt Turner: "My alpha tree is back up (after taking quite some time to get my GPG key signed). It contains just some simple fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha: alpha: silence 'const' warning in sys_marvel.c alpha: include module.h to fix modpost on Tsunami alpha: properly define get/set_rtc_time on Marvel/SMP alpha: VGA_HOSE depends on VGA_CONSOLE
-
Jiri Slaby authored
The test in pdc_console_tty_close '!tty->count' was always wrong because tty->count is decremented after tty->ops->close is called and thus can never be zero. Hence the 'then' branch was never executed and the timer never deleted. This did not matter until commit 5dd5bc40 ("TTY: pdc_cons, use tty_port"). There we needed to set TTY in tty_port to NULL, but this never happened due to the bug above. So change the test to really trigger at the last close by changing the condition to 'tty->count == 1'. Well, the driver should not touch tty->count at all. It should use tty_port->count and count open count there itself. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-and-tested-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound sound fixes from Takashi Iwai: "As good as nothing exciting here; just a few trivial fixes for various ASoC stuff." * tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: omap-pcm: Free dma buffers in case of error. ASoC: s3c2412-i2s: Fix dai registration ASoC: wm8350: Don't use locally allocated codec struct ASoC: tlv312aic23: unbreak resume ASoC: bf5xx-ssm2602: Set DAI format ASoC: core: check of_property_count_strings failure ASoC: dt: sgtl5000.txt: Add description for 'reg' field ASoC: wm_hubs: Make sure we don't disable differential line outputs
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linuxLinus Torvalds authored
Pull an ACPI patch from Len Brown: "It fixes a D3 issue new in 3.4-rc1." By Lin Ming via Len Brown: * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: ACPI: Fix D3hot v D3cold confusion
-
Sasha Levin authored
Currently, we'll try mounting any device who's major device number is UNNAMED_MAJOR as NFS root. This would happen for non-NFS devices as well (such as 9p devices) but it wouldn't cause any issues since mounting the device as NFS would fail quickly and the code proceeded to doing the proper mount: [ 101.522716] VFS: Unable to mount root fs via NFS, trying floppy. [ 101.534499] VFS: Mounted root (9p filesystem) on device 0:18. Commit 6829a048102a ("NFS: Retry mounting NFSROOT") introduced retries when mounting NFS root, which means that now we don't immediately fail and instead it takes an additional 90+ seconds until we stop retrying, which has revealed the issue this patch fixes. This meant that it would take an additional 90 seconds to boot when we're not using a device type which gets detected in order before NFS. This patch modifies the NFS type check to require device type to be 'Root_NFS' instead of requiring the device to have an UNNAMED_MAJOR major. This makes boot process cleaner since we now won't go through the NFS mounting code at all when the device isn't an NFS root ("/dev/nfs"). Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-