- 06 Nov, 2015 40 commits
-
-
Michal Hocko authored
Commit 424cdc14 ("memcg: convert threshold to bytes") has fixed a regression introduced by 3e32cb2e ("mm: memcontrol: lockless page counters") where thresholds were silently converted to use page units rather than bytes when interpreting the user input. The fix is not complete, though, as properly pointed out by Ben Hutchings during stable backport review. The page count is converted to bytes but unsigned long is used to hold the value which would be obviously not sufficient for 32b systems with more than 4G thresholds. The same applies to usage as taken from mem_cgroup_usage which might overflow. Let's remove this bytes vs. pages internal tracking differences and handle thresholds in page units internally. Chage mem_cgroup_usage() to return the value in page units and revert 424cdc14 because this should be sufficient for the consistent handling. mem_cgroup_read_u64 as the only users of mem_cgroup_usage outside of the threshold handling code is converted to give the proper in bytes result. It is doing that already for page_counter output so this is more consistent as well. The value presented to the userspace is still in bytes units. Fixes: 424cdc14 ("memcg: convert threshold to bytes") Fixes: 3e32cb2e ("mm: memcontrol: lockless page counters") Signed-off-by:
Michal Hocko <mhocko@suse.com> Reported-by:
Ben Hutchings <ben@decadent.org.uk> Reviewed-by:
Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> From: Michal Hocko <mhocko@kernel.org> Subject: memcg-fix-thresholds-for-32b-architectures-fix Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Johannes Weiner <hannes@cmpxchg.org> From: Andrew Morton <akpm@linux-foundation.org> Subject: memcg-fix-thresholds-for-32b-architectures-fix-fix don't attempt to inline mem_cgroup_usage() The compiler ignores the inline anwyay. And __always_inlining it adds 600 bytes of goop to the .o file. Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Weiner authored
page_counter_try_charge() currently returns 0 on success and -ENOMEM on failure, which is surprising behavior given the function name. Make it follow the expected pattern of try_stuff() functions that return a boolean true to indicate success, or false for failure. Signed-off-by:
-
Johannes Weiner authored
memory.current on the root level doesn't add anything that wouldn't be more accurate and detailed using system statistics. It already doesn't include slabs, and it'll be a pain to keep in sync when further memory types are accounted in the memory controller. Remove it. Note that this applies to the new unified hierarchy interface only. Signed-off-by:
-
Dave Hansen authored
My recent patch "mm, hugetlb: use memory policy when available" added some bloat to hugetlb.o. This patch aims to get some of the bloat back, especially when NUMA is not in play. It does this with an implicit #ifdef and marking some things static that should have been static in my first patch. It also makes the warnings only VM_WARN_ON()s. They were responsible for a pretty big chunk of the bloat. Doing this gets our NUMA=n text size back to a wee bit _below_ where we started before the original patch. It also shaves a bit of space off the NUMA=y case, but not much. Enforcing the mempolicy definitely takes some text and it's hard to avoid. size(1) output: text data bss dec hex filename 30745 3433 2492 36670 8f3e hugetlb.o.nonuma.baseline 31305 3755 2492 37552 92b0 hugetlb.o.nonuma.patch1 30713 3433 2492 36638 8f1e hugetlb.o.nonuma.patch2 (this patch) 25235 473 41276 66984 105a8 hugetlb.o.numa.baseline 25715 475 41276 67466 1078a hugetlb.o.numa.patch1 25491 473 41276 67240 106a8 hugetlb.o.numa.patch2 (this patch) Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
Dave Hansen authored
I have a hugetlbfs user which is never explicitly allocating huge pages with 'nr_hugepages'. They only set 'nr_overcommit_hugepages' and then let the pages be allocated from the buddy allocator at fault time. This works, but they noticed that mbind() was not doing them any good and the pages were being allocated without respect for the policy they specified. The code in question is this: > struct page *alloc_huge_page(struct vm_area_struct *vma, ... > page = dequeue_huge_page_vma(h, vma, addr, avoid_reserve, gbl_chg); > if (!page) { > page = alloc_buddy_huge_page(h, NUMA_NO_NODE); dequeue_huge_page_vma() is smart and will respect the VMA's memory policy. But, it only grabs _existing_ huge pages from the huge page pool. If the pool is empty, we fall back to alloc_buddy_huge_page() which obviously can't do anything with the VMA's policy because it isn't even passed the VMA. Almost everybody preallocates huge pages. That's probably why nobody has ever noticed this. Looking back at the git history, I don't think this _ever_ worked from when alloc_buddy_huge_page() was introduced in 7893d1d5, 8 years ago. The fix is to pass vma/addr down in to the places where we actually call in to the buddy allocator. It's fairly straightforward plumbing. This has been lightly tested. Signed-off-by:Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Alexander Kuleshov authored
There are no users of the node_hstates array outside of the mm/hugetlb.c. So let's make it static. Signed-off-by:
Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by:
-
Rasmus Villemoes authored
As far as I can tell, strncpy_from_unsafe never returns -EFAULT. ret is the result of a __copy_from_user_inatomic(), which is 0 for success and positive (in this case necessarily 1) for access error - it is never negative. So we were always returning the length of the, possibly truncated, destination string. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by:
Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by:
-
Andrew Morton authored
mm/cma.c: In function 'cma_alloc': mm/cma.c:366: warning: 'pfn' may be used uninitialized in this function The patch actually improves the tracing a bit: if alloc_contig_range() fails, tracing will display the offending pfn rather than -1. Cc: Stefan Strogin <stefan.strogin@gmail.com> Cc: Michal Nazarewicz <mpn@google.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Hugh Dickins authored
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties since v2.6.16 first introduced page migration; and the set_page_dirty() which completed its migration of PageDirty, later had to be moderated to __set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too. No actual problems seen with this procedure recently, but if you look into what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually achieving, it turns out to be nothing more than moving the PageDirty flag, and its NR_FILE_DIRTY stat from one zone to another. It would be good to avoid a pile of irrelevant decrementations and incrementations, and improper event counting, and unnecessary descent of the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which radix_tree_replace_slot() left in place anyway). Do the NR_FILE_DIRTY movement, like the other stats movements, while interrupts still disabled in migrate_page_move_mapping(); and don't even bother if the zone is the same. Do the PageDirty movement there under tree_lock too, where old page is frozen and newpage not yet visible: bearing in mind that as soon as newpage becomes visible in radix_tree, an un-page-locked set_page_dirty() might interfere (or perhaps that's just not possible: anything doing so should already hold an additional reference to the old page, preventing its migration; but play safe). But we do still need to transfer PageDirty in migrate_page_copy(), for those who don't go the mapping route through migrate_page_move_mapping(). Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Hugh Dickins authored
We have had trouble in the past from the way in which page migration's newpage is initialized in dribs and drabs - see commit 8bdd6380 ("mm: fix direct reclaim writeback regression") which proposed a cleanup. We have no actual problem now, but I think the procedure would be clearer (and alternative get_new_page pools safer to implement) if we assert that newpage is not touched until we are sure that it's going to be used - except for taking the trylock on it in __unmap_and_move(). So shift the early initializations from move_to_new_page() into migrate_page_move_mapping(), mapping and NULL-mapping paths. Similarly migrate_huge_page_move_mapping(), but its NULL-mapping path can just be deleted: you cannot reach hugetlbfs_migrate_page() with a NULL mapping. Adjust stages 3 to 8 in the Documentation file accordingly. Signed-off-by:
-
Hugh Dickins authored
Hitherto page migration has avoided using a migration entry for a swapcache page mapped into userspace, apparently for historical reasons. So any page blessed with swapcache would entail a minor fault when it's next touched, which page migration otherwise tries to avoid. Swapcache in an mlocked area is rare, so won't often matter, but still better fixed. Just rearrange the block in try_to_unmap_one(), to handle TTU_MIGRATION before checking PageAnon, that's all (apart from some reindenting). Well, no, that's not quite all: doesn't this by the way fix a soft_dirty bug, that page migration of a file page was forgetting to transfer the soft_dirty bit? Probably not a serious bug: if I understand correctly, soft_dirty afficionados usually have to handle file pages separately anyway; but we publish the bit in /proc/<pid>/pagemap on file mappings as well as anonymous, so page migration ought not to perturb it. Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Hugh Dickins authored
__unmap_and_move() contains a long stale comment on page_get_anon_vma() and PageSwapCache(), with an odd control flow that's hard to follow. Mostly this reflects our confusion about the lifetime of an anon_vma, in the early days of page migration, before we could take a reference to one. Nowadays this seems quite straightforward: cut it all down to essentials. I cannot see the relevance of swapcache here at all, so don't treat it any differently: I believe the old comment reflects in part our anon_vma confusions, and in part the original v2.6.16 page migration technique, which used actual swap to migrate anon instead of swap-like migration entries. Why should a swapcache page not be migrated with the aid of migration entry ptes like everything else? So lose that comment now, and enable migration entries for swapcache in the next patch. Signed-off-by:
-
Hugh Dickins authored
Clean up page migration a little more by calling remove_migration_ptes() from the same level, on success or on failure, from __unmap_and_move() or from unmap_and_move_huge_page(). Don't reset page->mapping of a PageAnon old page in move_to_new_page(), leave that to when the page is freed. Except for here in page migration, it has been an invariant that a PageAnon (bit set in page->mapping) page stays PageAnon until it is freed, and I think we're safer to keep to that. And with the above rearrangement, it's necessary because zap_pte_range() wants to identify whether a migration entry represents a file or an anon page, to update the appropriate rss stats without waiting on it. Signed-off-by:
-
Hugh Dickins authored
Clean up page migration a little by moving the trylock of newpage from move_to_new_page() into __unmap_and_move(), where the old page has been locked. Adjust unmap_and_move_huge_page() and balloon_page_migrate() accordingly. But make one kind-of-functional change on the way: whereas trylock of newpage used to BUG() if it failed, now simply return -EAGAIN if so. Cutting out BUG()s is good, right? But, to be honest, this is really to extend the usefulness of the custom put_new_page feature, allowing a pool of new pages to be shared perhaps with racing uses. Use an "else" instead of that "skip_unmap" label. Signed-off-by:
Rafael Aquini <aquini@redhat.com> Signed-off-by:
-
Hugh Dickins authored
I don't know of any problem from the way it's used in our current tree, but there is one defect in page migration's custom put_new_page feature. An unused newpage is expected to be released with the put_new_page(), but there was one MIGRATEPAGE_SUCCESS (0) path which released it with putback_lru_page(): which can be very wrong for a custom pool. Fixed more easily by resetting put_new_page once it won't be needed, than by adding a further flag to modify the rc test. Signed-off-by:
-
Hugh Dickins authored
It's migrate.c not migration,c, and nowadays putback_movable_pages() not putback_lru_pages(). Signed-off-by:
-
Hugh Dickins authored
After v4.3's commit 0610c25d ("memcg: fix dirty page migration") mem_cgroup_migrate() doesn't have much to offer in page migration: convert migrate_misplaced_transhuge_page() to set_page_memcg() instead. Then rename mem_cgroup_migrate() to mem_cgroup_replace_page(), since its remaining callers are replace_page_cache_page() and shmem_replace_page(): both of whom passed lrucare true, so just eliminate that argument. Signed-off-by:
-
Hugh Dickins authored
Commit e6c509f8 ("mm: use clear_page_mlock() in page_remove_rmap()") in v3.7 inadvertently made mlock_migrate_page() impotent: page migration unmaps the page from userspace before migrating, and that commit clears PageMlocked on the final unmap, leaving mlock_migrate_page() with nothing to do. Not a serious bug, the next attempt at reclaiming the page would fix it up; but a betrayal of page migration's intent - the new page ought to emerge as PageMlocked. I don't see how to fix it for mlock_migrate_page() itself; but easily fixed in remove_migration_pte(), by calling mlock_vma_page() when the vma is VM_LOCKED - under pte lock as in try_to_unmap_one(). Delete mlock_migrate_page()? Not quite, it does still serve a purpose for migrate_misplaced_transhuge_page(): where we could replace it by a test, clear_page_mlock(), mlock_vma_page() sequence; but would that be an improvement? mlock_migrate_page() is fairly lean, and let's make it leaner by skipping the irq save/restore now clearly not needed. Signed-off-by:
-
Hugh Dickins authored
KernelThreadSanitizer (ktsan) has shown that the down_read_trylock() of mmap_sem in try_to_unmap_one() (when going to set PageMlocked on a page found mapped in a VM_LOCKED vma) is ineffective against races with exit_mmap()'s munlock_vma_pages_all(), because mmap_sem is not held when tearing down an mm. But that's okay, those races are benign; and although we've believed for years in that ugly down_read_trylock(), it's unsuitable for the job, and frustrates the good intention of setting PageMlocked when it fails. It just doesn't matter if here we read vm_flags an instant before or after a racing mlock() or munlock() or exit_mmap() sets or clears VM_LOCKED: the syscalls (or exit) work their way up the address space (taking pt locks after updating vm_flags) to establish the final state. We do still need to be careful never to mark a page Mlocked (hence unevictable) by any race that will not be corrected shortly after. The page lock protects from many of the races, but not all (a page is not necessarily locked when it's unmapped). But the pte lock we just dropped is good to cover the rest (and serializes even with munlock_vma_pages_all(), so no special barriers required): now hold on to the pte lock while calling mlock_vma_page(). Is that lock ordering safe? Yes, that's how follow_page_pte() calls it, and how page_remove_rmap() calls the complementary clear_page_mlock(). This fixes the following case (though not a case which anyone has complained of), which mmap_sem did not: truncation's preliminary unmap_mapping_range() is supposed to remove even the anonymous COWs of filecache pages, and that might race with try_to_unmap_one() on a VM_LOCKED vma, so that mlock_vma_page() sets PageMlocked just after zap_pte_range() unmaps the page, causing "Bad page state (mlocked)" when freed. The pte lock protects against this. You could say that it also protects against the more ordinary case, racing with the preliminary unmapping of a filecache page itself: but in our current tree, that's independently protected by i_mmap_rwsem; and that race would be why "Bad page state (mlocked)" was seen before commit 48ec833b ("Revert mm/memory.c: share the i_mmap_rwsem"). Vlastimil Babka points out another race which this patch protects against. try_to_unmap_one() might reach its mlock_vma_page() TestSetPageMlocked a moment after munlock_vma_pages_all() did its Phase 1 TestClearPageMlocked: leaving PageMlocked and unevictable when it should be evictable. mmap_sem is ineffective because exit_mmap() does not hold it; page lock ineffective because __munlock_pagevec() only takes it afterwards, in Phase 2; pte lock is effective because __munlock_pagevec_fill() takes it to get the page, after VM_LOCKED was cleared from vm_flags, so visible to try_to_unmap_one. Kirill Shutemov points out that if the compiler chooses to implement a "vma->vm_flags &= VM_WHATEVER" or "vma->vm_flags |= VM_WHATEVER" operation with an intermediate store of unrelated bits set, since I'm here foregoing its usual protection by mmap_sem, try_to_unmap_one() might catch sight of a spurious VM_LOCKED in vm_flags, and make the wrong decision. This does not appear to be an immediate problem, but we may want to define vm_flags accessors in future, to guard against such a possibility. While we're here, make a related optimization in try_to_munmap_one(): if it's doing TTU_MUNLOCK, then there's no point at all in descending the page tables and getting the pt lock, unless the vma is VM_LOCKED. Yes, that can change racily, but it can change racily even without the optimization: it's not critical. Far better not to waste time here. Stopped short of separating try_to_munlock_one() from try_to_munmap_one() on this occasion, but that's probably the sensible next step - with a rename, given that try_to_munlock()'s business is to try to set Mlocked. Updated the unevictable-lru Documentation, to remove its reference to mmap semaphore, but found a few more updates needed in just that area. Signed-off-by:
-
Hugh Dickins authored
While updating some mm Documentation, I came across a few straggling references to the non-linear vmas which were happily removed in v4.0. Delete them. Signed-off-by:
-
Vladimir Davydov authored
If ALLOC_SPLIT_PTLOCKS is defined, ptlock_init may fail, in which case we shouldn't increment NR_PAGETABLE. Since small allocations, such as ptlock, normally do not fail (currently they can fail if kmemcg is used though), this patch does not really fix anything and should be considered as a code cleanup. Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
-
Laurent Dufour authored
Don't build clear_soft_dirty_pmd() if transparent huge pages are not enabled. Signed-off-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Laurent Dufour authored
As mentioned in the commit 56eecdb9 ("mm: Use ptep/pmdp_set_numa() for updating _PAGE_NUMA bit"), architectures like ppc64 don't do tlb flush in set_pte/pmd functions. So when dealing with existing pte in clear_soft_dirty, the pte must be cleared before being modified. Signed-off-by:
-
Andrea Arcangeli authored
get_mergeable_page() can only return NULL (also in case of errors) or the pinned mergeable page. It can't return an error different than NULL. This optimizes away the unnecessary error check. Add a return after the "out:" label in the callee to make it more readable. Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Acked-by:
-
Andrea Arcangeli authored
Doing the VM_MERGEABLE check after the page == kpage check won't provide any meaningful benefit. The !vma->anon_vma check of find_mergeable_vma is the only superfluous bit in using find_mergeable_vma because the !PageAnon check of try_to_merge_one_page() implicitly checks for that, but it still looks cleaner to share the same find_mergeable_vma(). Signed-off-by:
-
Andrea Arcangeli authored
This just uses the helper function to cleanup the assumption on the hlist_node internals. Signed-off-by:
-
Andrea Arcangeli authored
The stable_nodes can become stale at any time if the underlying pages gets freed. The stable_node gets collected and removed from the stable rbtree if that is detected during the rbtree lookups. Don't fail the lookup if running into stale stable_nodes, just restart the lookup after collecting the stale stable_nodes. Otherwise the CPU spent in the preparation stage is wasted and the lookup must be repeated at the next loop potentially failing a second time in a second stale stable_node. If we don't prune aggressively we delay the merging of the unstable node candidates and at the same time we delay the freeing of the stale stable_nodes. Keeping stale stable_nodes around wastes memory and it can't provide any benefit. Signed-off-by:
-
Andrea Arcangeli authored
While at it add it to the file and anon walks too. Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
-
Vladimir Davydov authored
Before the previous patch ("memcg: unify slab and other kmem pages charging"), __mem_cgroup_from_kmem had to handle two types of kmem - slab pages and pages allocated with alloc_kmem_pages - memcg in the page struct. Now we can unify it. Since after it, this function becomes tiny we can fold it into mem_cgroup_from_kmem. [hughd@google.com: move mem_cgroup_from_kmem into list_lru.c] Signed-off-by: -
Vladimir Davydov authored
We have memcg_kmem_charge and memcg_kmem_uncharge methods for charging and uncharging kmem pages to memcg, but currently they are not used for charging slab pages (i.e. they are only used for charging pages allocated with alloc_kmem_pages). The only reason why the slab subsystem uses special helpers, memcg_charge_slab and memcg_uncharge_slab, is that it needs to charge to the memcg of kmem cache while memcg_charge_kmem charges to the memcg that the current task belongs to. To remove this diversity, this patch adds an extra argument to __memcg_kmem_charge that can be a pointer to a memcg or NULL. If it is not NULL, the function tries to charge to the memcg it points to, otherwise it charge to the current context. Next, it makes the slab subsystem use this function to charge slab pages. Since memcg_charge_kmem and memcg_uncharge_kmem helpers are now used only in __memcg_kmem_charge and __memcg_kmem_uncharge, they are inlined. Since __memcg_kmem_charge stores a pointer to the memcg in the page struct, we don't need memcg_uncharge_slab anymore and can use free_kmem_pages. Besides, one can now detect which memcg a slab page belongs to by reading /proc/kpagecgroup. Note, this patch switches slab to charge-after-alloc design. Since this design is already used for all other memcg charges, it should not make any difference. [hannes@cmpxchg.org: better to have an outer function than a magic parameter for the memcg lookup] Signed-off-by:
-
Vladimir Davydov authored
Charging kmem pages proceeds in two steps. First, we try to charge the allocation size to the memcg the current task belongs to, then we allocate a page and "commit" the charge storing the pointer to the memcg in the page struct. Such a design looks overcomplicated, because there is not much sense in trying charging the allocation before actually allocating a page: we won't be able to consume much memory over the limit even if we charge after doing the actual allocation, besides we already charge user pages post factum, so being pedantic with kmem pages just looks pointless. So this patch simplifies the design by merging the "charge" and the "commit" steps into the same function, which takes the allocated page. Also, rename the charge and uncharge methods to memcg_kmem_charge and memcg_kmem_uncharge and make the charge method return error code instead of bool to conform to mem_cgroup_try_charge. Signed-off-by:
-
Xishi Qiu authored
If kernelcore was not specified, or the kernelcore size is zero (required_movablecore >= totalpages), or the kernelcore size is larger than totalpages, there is no ZONE_MOVABLE. We should fill the zone with both kernel memory and movable memory. Signed-off-by:
Xishi Qiu <qiuxishi@huawei.com> Reviewed-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: <zhongjiang@huawei.com> Signed-off-by:
-
Davidlohr Bueso authored
This function incurs in very hot paths and merely does a few loads for validity check. Lets inline it, such that we can save the function call overhead. (akpm: this is cosmetic - the compiler already inlines vmacache_valid_mm()) Signed-off-by:
-
yalin wang authored
Change HIGHMEM_ZONE to be the same as the DMA_ZONE macro. Signed-off-by:
yalin wang <yalin.wang2010@gmail.com> Signed-off-by:
-
Laura Abbott authored
Srinivas Kandagatla reported bad page messages when trying to remove the bottom 2MB on an ARM based IFC6410 board BUG: Bad page state in process swapper pfn:fffa8 page:ef7fb500 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x96640253(locked|error|dirty|active|arch_1|reclaim|mlocked) page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set bad because of flags: flags: 0x200041(locked|active|mlocked) Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-rc3-00007-g412f9ba-dirty #816 Hardware name: Qualcomm (Flattened Device Tree) unwind_backtrace show_stack dump_stack bad_page free_pages_prepare free_hot_cold_page __free_pages free_highmem_page mem_init start_kernel Disabling lock debugging due to kernel taint Removing the lower 2MB made the start of the lowmem zone to no longer be page block aligned. IFC6410 uses CONFIG_FLATMEM where alloc_node_mem_map allocates memory for the mem_map. alloc_node_mem_map will offset for unaligned nodes with the assumption the pfn/page translation functions will account for the offset. The functions for CONFIG_FLATMEM do not offset however, resulting in overrunning the memmap array. Just use the allocated memmap without any offset when running with CONFIG_FLATMEM to avoid the overrun. Signed-off-by:Laura Abbott <laura@labbott.name> Signed-off-by:
Laura Abbott <lauraa@codeaurora.org> Reported-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by:
Bjorn Andersson <bjorn.andersson@sonymobile.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Kevin Hilman <khilman@linaro.org> Cc: Arnd Bergman <arnd@arndb.de> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Andy Gross <agross@codeaurora.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
-
Andrew Morton authored
With x86_64 (config http://ozlabs.org/~akpm/config-akpm2.txt) and old gcc (4.4.4), drivers/base/node.c:node_read_meminfo() is using 2344 bytes of stack. Uninlining node_page_state() reduces this to 440 bytes. The stack consumption issue is fixed by newer gcc (4.8.4) however with that compiler this patch reduces the node.o text size from 7314 bytes to 4578. Signed-off-by:
-
Chen Gang authored
Make __install_special_mapping() args order match the caller, so the caller can pass their register args directly to callee with no touch. For most of architectures, args (at least the first 5th args) are in registers, so this change will have effect on most of architectures. For -O2, __install_special_mapping() may be inlined under most of architectures, but for -Os, it should not. So this change can get a little better performance for -Os, at least. Signed-off-by:
Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by:
-
Geliang Tang authored
(1) For !CONFIG_BUG cases, the bug call is a no-op, so we couldn't care less and the change is ok. (2) ppc and mips, which HAVE_ARCH_BUG_ON, do not rely on branch predictions as it seems to be pointless[1] and thus callers should not be trying to push an optimization in the first place. (3) For CONFIG_BUG and !HAVE_ARCH_BUG_ON cases, BUG_ON() contains an unlikely compiler flag already. Hence, we can drop unlikely behind BUG_ON(). [1] http://lkml.iu.edu/hypermail/linux/kernel/1101.3/02289.htmlSigned-off-by:Geliang Tang <geliangtang@163.com> Acked-by:
Davidlohr Bueso <dave@stgolabs.net> Signed-off-by:
-
Chen Gang authored
When fget() fails we can return -EBADF directly. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Chen Gang authored
It is still a little better to remove it, although it should be skipped by "-O2". Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>=0A= Acked-by:
-
