Merge misc fixes from Andrew Morton:
 "10 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  scripts/gdb: fix lx-lsmod refcnt
  omfs: fix potential integer overflow in allocator
  omfs: fix sign confusion for bitmap loop counter
  omfs: set error return when d_make_root() fails
  fs, omfs: add NULL terminator in the end up the token list
  MAINTAINERS: update CAPABILITIES pattern
  fs/binfmt_elf.c:load_elf_binary(): return -EINVAL on zero-length mappings
  tracing/mm: don't trace mm_page_pcpu_drain on offline cpus
  tracing/mm: don't trace mm_page_free on offline cpus
  tracing/mm: don't trace kmem_cache_free on offline cpus

Pull fixes for cpumask and modules from Rusty Russell:
 "** NOW WITH TESTING! **

  Two fixes which got lost in my recent distraction.  One is a weird
  cpumask function which needed to be rewritten, the other is a module
  bug which is cc:stable"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  cpumask_set_cpu_local_first => cpumask_local_spread, lament
  module: Call module notifier on failure after complete_formation()

Pull drm fixes from Dave Airlie:
 "This is made up 4 groups of fixes detailed below.

  vgem:
      Due to some misgivings about possible bad use cases this allow,
      backout a chunk of the interface to stop those use cases for now.

  radeon:
      Fix for an oops regression in the audio code, and a partial revert
      for a fix that was cauing problems.

  nouveau:
      regression fix for Fermi, and display-less Maxwell boot fixes.

  drm core:
      a fix for i915 cursor vblank waiting in the atomic helpers"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau/gr/gm204: remove a stray printk
  drm/nouveau/devinit/gm100-: force devinit table execution on boards without PDISP
  drm/nouveau/devinit/gf100: make the force-post condition more obvious
  drm/nouveau/gr/gf100-: fix wrong constant definition
  drm/radeon: partially revert "fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handling"
  drm/radeon/audio: make sure connector is valid in hotplug case
  Revert "drm/radeon: only mark audio as connected if the monitor supports it (v3)"
  drm/radeon: don't share plls if monitors differ in audio support
  drm/vgem: drop DRIVER_PRIME (v2)
  drm/plane-helper: Adapt cursor hack to transitional helpers

Pull sound fixes from Takashi Iwai:
 "No big surprise here, just a bunch of small fixes for HD-audio and
  USB-audio:

   - partial revert of widget power-saving for IDT codecs
   - revert mute-LED enum ctl for Thinkpads due to confusion
   - a quirk for a new Radeon HDMI controller
   - Realtek codec name fix for Dell
   - a workaround for headphone mic boost on some laptops
   - stream_pm ops setup (and its fix for regression)
   - another quirk for MS LifeCam USB-audio"

* tag 'sound-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix lost sound due to stream_pm ops cleanup
  ALSA: hda - Disable Headphone Mic boost for ALC662
  ALSA: hda - Disable power_save_node for IDT92HD71bxx
  ALSA: hda - Fix noise on AMD radeon 290x controller
  ALSA: hda - Set stream_pm ops automatically by generic parser
  ALSA: hda/realtek - Add ALC256 alias name for Dell
  Revert "ALSA: hda - Add mute-LED mode control to Thinkpad"
  ALSA: usb-audio: Add quirk for MS LifeCam HD-3000

Pull m,ore md bugfixes gfrom Neil Brown:
 "Assorted fixes for new RAID5 stripe-batching functionality.

  Unfortunately this functionality was merged a little prematurely.  The
  necessary testing and code review is now complete (or as complete as
  it can be) and to code passes a variety of tests and looks quite
  sensible.

  Also a fix for some recent locking changes - a race was introduced
  which causes a reshape request to sometimes fail.  No data safety
  issues"

* tag 'md/4.1-rc5-fixes' of git://neil.brown.name/md:
  md: fix race when unfreezing sync_action
  md/raid5: break stripe-batches when the array has failed.
  md/raid5: call break_stripe_batch_list from handle_stripe_clean_event
  md/raid5: be more selective about distributing flags across batch.
  md/raid5: add handle_flags arg to break_stripe_batch_list.
  md/raid5: duplicate some more handle_stripe_clean_event code in break_stripe_batch_list
  md/raid5: remove condition test from check_break_stripe_batch_list.
  md/raid5: Ensure a batch member is not handled prematurely.
  md/raid5: close race between STRIPE_BIT_DELAY and batching.
  md/raid5: ensure whole batch is delayed for all required bitmap updates.

The commit [49fb1897: ALSA: hda - Set stream_pm ops automatically
by generic parser] resulted in regressions on some Realtek and VIA
codecs because these drivers set patch_ops after calling the generic
parser, thus stream_pm got cleared to NULL again.  I haven't noticed
since I tested with IDT codec.

Restore (partial revert) the stream_pm ops for them to fix the
regression.

Fixes: 49fb1897 ('ALSA: hda - Set stream_pm ops automatically by generic parser')
Reported-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Commit 2f35c41f ("module: Replace module_ref with atomic_t refcnt")
changes the way refcnt is handled but did not update the gdb script to
use the new variable.

Since refcnt is not per-cpu anymore, we can directly read its value.
Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Pantelis Koukousoulas <pktoss@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Both 'i' and 'bits_per_entry' are signed integers but the result is a
u64 block number.  Cast i to u64 to avoid truncation on 32-bit targets.

Found by Coverity (CID 200679).
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The count variable is used to iterate down to (below) zero from the size
of the bitmap and handle the one-filling the remainder of the last
partial bitmap block.  The loop conditional expects count to be signed
in order to detect when the final block is processed, after which count
goes negative.

Unfortunately, a recent change made this unsigned along with some other
related fields.  The result of is this is that during mount,
omfs_get_imap will overrun the bitmap array and corrupt memory unless
number of blocks happens to be a multiple of 8 * blocksize.

Fix by changing count back to signed: it is guaranteed to fit in an s32
without overflow due to an enforced limit on the number of blocks in the
filesystem.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A static checker found the following issue in the error path for
omfs_fill_super:

    fs/omfs/inode.c:552 omfs_fill_super()
    warn: missing error code here? 'd_make_root()' failed. 'ret' = '0'

Fix by returning -ENOMEM in this case.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

match_token() expects a NULL terminator at the end of the token list so
that it would know where to stop.  Not having one causes it to overrun
to invalid memory.

In practice, passing a mount option that omfs didn't recognize would
sometimes panic the system.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 1ddd3b4e ("LSM: Remove unused capability.c") removed the
file, remove the file pattern.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

load_elf_binary() returns `retval', not `error'.

Fixes: a87938b2 ("fs/binfmt_elf.c: fix bug in loading of PIE binaries")
Reported-by: James Hogan <james.hogan@imgtec.com>
Cc: Michael Davidson <md@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since tracepoints use RCU for protection, they must not be called on
offline cpus.  trace_mm_page_pcpu_drain can be called on an offline cpu
in this scenario caught by LOCKDEP:

     ===============================
     [ INFO: suspicious RCU usage. ]
     4.1.0-rc1+ #9 Not tainted
     -------------------------------
     include/trace/events/kmem.h:265 suspicious rcu_dereference_check() usage!

    other info that might help us debug this:

    RCU used illegally from offline CPU!
    rcu_scheduler_active = 1, debug_locks = 1
     1 lock held by swapper/5/0:
      #0:  (&(&zone->lock)->rlock){..-...}, at: [<c0000000002073b0>] .free_pcppages_bulk+0x70/0x920

    stack backtrace:
     CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.1.0-rc1+ #9
     Call Trace:
       .dump_stack+0x98/0xd4 (unreliable)
       .lockdep_rcu_suspicious+0x108/0x170
       .free_pcppages_bulk+0x60c/0x920
       .free_hot_cold_page+0x208/0x280
       .destroy_context+0x90/0xd0
       .__mmdrop+0x58/0x160
       .idle_task_exit+0xf0/0x100
       .pnv_smp_cpu_kill_self+0x58/0x2c0
       .cpu_die+0x34/0x50
       .arch_cpu_idle_dead+0x20/0x40
       .cpu_startup_entry+0x708/0x7a0
       .start_secondary+0x36c/0x3a0
       start_secondary_prolog+0x10/0x14

Fix this by converting mm_page_pcpu_drain trace point into
TRACE_EVENT_CONDITION where condition is cpu_online(smp_processor_id())
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since tracepoints use RCU for protection, they must not be called on
offline cpus.  trace_mm_page_free can be called on an offline cpu in this
scenario caught by LOCKDEP:

     ===============================
     [ INFO: suspicious RCU usage. ]
     4.1.0-rc1+ #9 Not tainted
     -------------------------------
     include/trace/events/kmem.h:170 suspicious rcu_dereference_check() usage!

    other info that might help us debug this:

    RCU used illegally from offline CPU!
    rcu_scheduler_active = 1, debug_locks = 1
     no locks held by swapper/1/0.

    stack backtrace:
     CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.1.0-rc1+ #9
     Call Trace:
       .dump_stack+0x98/0xd4 (unreliable)
       .lockdep_rcu_suspicious+0x108/0x170
       .free_pages_prepare+0x494/0x680
       .free_hot_cold_page+0x50/0x280
       .destroy_context+0x90/0xd0
       .__mmdrop+0x58/0x160
       .idle_task_exit+0xf0/0x100
       .pnv_smp_cpu_kill_self+0x58/0x2c0
       .cpu_die+0x34/0x50
       .arch_cpu_idle_dead+0x20/0x40
       .cpu_startup_entry+0x708/0x7a0
       .start_secondary+0x36c/0x3a0
       start_secondary_prolog+0x10/0x14

Fix this by converting mm_page_free trace point into TRACE_EVENT_CONDITION
where condition is cpu_online(smp_processor_id())
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since tracepoints use RCU for protection, they must not be called on
offline cpus.  trace_kmem_cache_free can be called on an offline cpu in
this scenario caught by LOCKDEP:

    ===============================
    [ INFO: suspicious RCU usage. ]
    4.1.0-rc1+ #9 Not tainted
    -------------------------------
    include/trace/events/kmem.h:148 suspicious rcu_dereference_check() usage!

    other info that might help us debug this:

    RCU used illegally from offline CPU!
    rcu_scheduler_active = 1, debug_locks = 1
    no locks held by swapper/1/0.

    stack backtrace:
    CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.1.0-rc1+ #9
    Call Trace:
      .dump_stack+0x98/0xd4 (unreliable)
      .lockdep_rcu_suspicious+0x108/0x170
      .kmem_cache_free+0x344/0x4b0
      .__mmdrop+0x4c/0x160
      .idle_task_exit+0xf0/0x100
      .pnv_smp_cpu_kill_self+0x58/0x2c0
      .cpu_die+0x34/0x50
      .arch_cpu_idle_dead+0x20/0x40
      .cpu_startup_entry+0x708/0x7a0
      .start_secondary+0x36c/0x3a0
      start_secondary_prolog+0x10/0x14

Fix this by converting kmem_cache_free trace point into
TRACE_EVENT_CONDITION where condition is cpu_online(smp_processor_id())
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Regression fix for Fermi acceleration, and fixes important to bringing
up display-less Maxwell boards.

* 'linux-4.1' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nouveau/gr/gm204: remove a stray printk
  drm/nouveau/devinit/gm100-: force devinit table execution on boards without PDISP
  drm/nouveau/devinit/gf100: make the force-post condition more obvious
  drm/nouveau/gr/gf100-: fix wrong constant definition

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Should fix fdo#89558
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

And also more generic, so it can be used on newer chipsets.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Commit 3740c825 ("drm/nouveau/gr/gf100-: add symbolic names for
classes") introduced a wrong macro definition causing acceleration setup
to fail. Fix it.
Signed-off-by: Lars Seipel <ls@slrz.net>
Fixes: 3740c825 ("drm/nouveau/gr/gf100-: add symbolic names for classes")
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

one more regression fix, partial revert.

* 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: partially revert "fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handling"

Pull Xtensa fix from Chris Zankel:
 "This fixes allmodconfig, which fails to build due to missing
  dma_alloc_attrs() and dma_free_attrs() functions"

* tag 'xtensa-20150526' of git://github.com/czankel/xtensa-linux:
  xtensa: Provide dummy dma_alloc_attrs() and dma_free_attrs()

Merge tag 'platform-drivers-x86-v4.1-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver fix from Darren Hart:
 "thinkpad_acpi: Revert unintentional device attribute renaming"

* tag 'platform-drivers-x86-v4.1-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  thinkpad_acpi: Revert unintentional device attribute renaming

We have that bug for years and some users report side effects when fixing it on older hardware.

So revert it for VM_CONTEXT0_PAGE_TABLE_END_ADDR, but keep it for VM 1-15.
Signed-off-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When headphone mic boost is above zero, some 10 - 20 second delay
might occur before the headphone mic is operational.
Therefore disable the headphone mic boost control (recording gain is
sufficient even without it).

(Note: this patch is not about the headset mic, it's about the less
common mic-in only mode.)

BugLink: https://bugs.launchpad.net/bugs/1454235Suggested-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

A recent change removed the need for locking around writing
to "sync_action" (and various other places), but introduced a
subtle race.
When e.g. setting 'reshape' on a 'frozen' array, the 'frozen'
flag is cleared before 'reshape' is set, so the md thread can
get in and start trying recovery - which isn't wanted.

So instead of clearing MD_RECOVERY_FROZEN for any command
except 'frozen', only clear it when each specific command
is parsed.  This allows the handling of 'reshape' to clear
the bit while a lock is held.

Also remove some places where we set MD_RECOVERY_NEEDED,
as it is always set on non-error exit of the function.
Signed-off-by: NeilBrown <neilb@suse.de>
Fixes: 6791875e ("md: make reconfig_mutex optional for writes to md sysfs files.")

Once the array has too much failure, we need to break
stripe-batches up so they can all be dealt with.
Signed-off-by: NeilBrown <neilb@suse.de>

Now that the code in break_stripe_batch_list() is nearly identical
to the end of handle_stripe_clean_event, replace the later
with a function call.

The only remaining difference of any interest is the masking that is
applieds to dev[i].flags copied from head_sh.
R5_WriteError certainly isn't wanted as it is set per-stripe, not
per-patch.  R5_Overlap isn't wanted as it is explicitly handled.
Signed-off-by: NeilBrown <neilb@suse.de>

When a batch of stripes is broken up, we keep some of the flags
that were per-stripe, and copy other flags from the head to all
others.

This only happens while a stripe is being handled, so many of the
flags are irrelevant.

The "SYNC_FLAGS" (which I've renamed to make it clear there are
several) and STRIPE_DEGRADED are set per-stripe and so need to be
preserved.  STRIPE_INSYNC is the only flag that is set on the head
that needs to be propagated to all others.

For safety, add a WARN_ON if others are set, except:
 STRIPE_HANDLE - this is safe and per-stripe and we are going to set
      in several cases anyway
 STRIPE_INSYNC
 STRIPE_IO_STARTED - this is just a hint and doesn't hurt.
 STRIPE_ON_PLUG_LIST
 STRIPE_ON_RELEASE_LIST - It is a point pointless for a batched
           stripe to be on one of these lists, but it can happen
           as can be safely ignored.
Signed-off-by: NeilBrown <neilb@suse.de>

When we break a stripe_batch_list we sometimes want to set
STRIPE_HANDLE on the individual stripes, and sometimes not.

So pass a 'handle_flags' arg.  If it is zero, always set STRIPE_HANDLE
(on non-head stripes).  If not zero, only set it if any of the given
flags are present.
Signed-off-by: NeilBrown <neilb@suse.de>

break_stripe_batch list didn't clear head_sh->batch_head.
This was probably a bug.

Also clear all R5_Overlap flags and if any were cleared, wake up
'wait_for_overlap'.
This isn't always necessary but the worst effect is a little
extra checking for code that is waiting on wait_for_overlap.

Also, don't use wake_up_nr() because that does the wrong thing
if 'nr' is zero, and it number of flags cleared doesn't
strongly correlate with the number of threads to wake.
Signed-off-by: NeilBrown <neilb@suse.de>

handle_stripe_clean_event() contains a chunk of code very
similar to check_break_stripe_batch_list().
If we make the latter more like the former, we can end up
with just one copy of this code.

This  first step removed the condition (and the 'check_') part
of the name.  This has the added advantage of making it clear
what check is being performed at the point where the function is
called.
Signed-off-by: NeilBrown <neilb@suse.de>

If a stripe is a member of a batch, but not the head, it must
not be handled separately from the rest of the batch.

'clear_batch_ready()' handles this requirement to some
extent but not completely.  If a member is passed to handle_stripe()
a second time it returns '0' indicating the stripe can be handled,
which is wrong.
So add an extra test.
Signed-off-by: NeilBrown <neilb@suse.de>

da91309e (cpumask: Utility function to set n'th cpu...) created a
genuinely weird function.  I never saw it before, it went through DaveM.
(He only does this to make us other maintainers feel better about our own
mistakes.)

cpumask_set_cpu_local_first's purpose is say "I need to spread things
across N online cpus, choose the ones on this numa node first"; you call
it in a loop.

It can fail.  One of the two callers ignores this, the other aborts and
fails the device open.

It can fail in two ways: allocating the off-stack cpumask, or through a
convoluted codepath which AFAICT can only occur if cpu_online_mask
changes.  Which shouldn't happen, because if cpu_online_mask can change
while you call this, it could return a now-offline cpu anyway.

It contains a nonsensical test "!cpumask_of_node(numa_node)".  This was
drawn to my attention by Geert, who said this causes a warning on Sparc.
It sets a single bit in a cpumask instead of returning a cpu number,
because that's what the callers want.

It could be made more efficient by passing the previous cpu rather than
an index, but that would be more invasive to the callers.

Fixes: da91309e
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (then rebased)
Tested-by: Amir Vadai <amirv@mellanox.com>
Acked-by: Amir Vadai <amirv@mellanox.com>
Acked-by: David S. Miller <davem@davemloft.net>

When we add a write to a stripe we need to make sure the bitmap
bit is set.  While doing that the stripe is not locked so it could
be added to a batch after which further changes to STRIPE_BIT_DELAY
and ->bm_seq are ineffective.

So we need to hold off adding to a stripe until bitmap_startwrite has
completed at least once, and we need to avoid further changes to
STRIPE_BIT_DELAY once the stripe has been added to a batch.

If a bitmap_startwrite() completes after the stripe was added to a
batch, it will not have set the bit, only incremented a counter, so no
extra delay of the stripe is needed.
Reported-by: Shaohua Li <shli@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>

When we add a stripe to a batch, we need to be sure that
head stripe will wait for the bitmap update required for the new
stripe.
Signed-off-by: NeilBrown <neilb@suse.de>

here's a drm regression fix for drivers only partially
converted to atomic.

* tag 'topic/drm-fixes-2015-05-27' of git://anongit.freedesktop.org/drm-intel:
  drm/plane-helper: Adapt cursor hack to transitional helpers

one revert, and two regression fixes for audio/hdmi
* 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon/audio: make sure connector is valid in hotplug case
  Revert "drm/radeon: only mark audio as connected if the monitor supports it (v3)"
  drm/radeon: don't share plls if monitors differ in audio support

Pull cifs fixes from Steve French:
 "Back from SambaXP - now have 8 small CIFS bug fixes to merge"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Fix race condition on RFC1002_NEGATIVE_SESSION_RESPONSE
  Fix to convert SURROGATE PAIR
  cifs: potential missing check for posix_lock_file_wait
  Fix to check Unique id and FileType when client refer file directly.
  CIFS: remove an unneeded NULL check
  [cifs] fix null pointer check
  Fix that several functions handle incorrect value of mapchars
  cifs: Don't replace dentries for dfs mounts