- 03 Jul, 2006 11 commits
-
-
Bjorn Helgaas authored
ACPI supplies a "shareable" indication, but PNPACPI ignores it. If a PNP device uses a shared interrupt, request_irq() fails because the PNP driver can't tell whether to supply SA_SHIRQ. This patch allows PNP drivers to test (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE) Signed-off-by:Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Matthieu Castet <castet.matthieu@free.fr> Cc: Li Shaohua <shaohua.li@intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Theodore Tso authored
This is needed to fix UML compilation given that alternatives_smp_module_add and alternatives_smp_module_del are null inline functions if !CONFIG_SMP. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
Arjan van de Ven authored
reported by Jure Repinc: > > http://bugzilla.kernel.org/show_bug.cgi?id=6773 > > checked out dmesg output and found the message > > > > ====================================================== > > [ BUG: hard-safe -> hard-unsafe lock order detected! ] > > ------------------------------------------------------ > > > > starting at line 660 of the dmesg.txt that I will attach. The patch below should fix the deadlock, albeit I suspect it's not the "right" fix; the right fix may well be to move the rx processing in bcm43xx to softirq context. [it's debatable, ipw2200 hit this exact same bug; at some point it's better to bite the bullet and move this to the common layer as my patch below does] Make the nl_table_lock irq-safe; it's taken for read in various netlink functions, including functions that several wireless drivers (ipw2200, bcm43xx) want to call from hardirq context. The deadlock was found by the lock validator. Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Cc: Michael Buesch <mb@bu3sch.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Jeff Garzik <jeff@garzik.org> Acked-by:
"David S. Miller" <davem@davemloft.net> Cc: jamal <hadi@cyberus.ca> Signed-off-by:
-
Heiko Carstens authored
Have a special version of print_symbol() for s390 which clears the most significant bit of addr before calling __print_symbol(). This seems to be better than checking/changing each place in the kernel that saves an instruction pointer. Without this the output would look like: hardirqs last enabled at (30907): [<80018c6a>] 0x80018c6a hardirqs last disabled at (30908): [<8001e48c>] 0x8001e48c softirqs last enabled at (30904): [<8001dc96>] 0x8001dc96 softirqs last disabled at (30897): [<8001dc50>] 0x8001dc50 instead of this: hardirqs last enabled at (19421): [<80018c72>] cpu_idle+0x176/0x1c4 hardirqs last disabled at (19422): [<8001e494>] io_no_vtime+0xa/0x1a softirqs last enabled at (19418): [<8001dc9e>] do_softirq+0xa6/0xe8 softirqs last disabled at (19411): [<8001dc58>] do_softirq+0x60/0xe8 Acked-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Andrew Morton authored
Remove duplicate/redundant/wrong IRQF_PERCPU definition. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
john stultz authored
We're not reay to take a timer interrupt until timekeeping_init() has run. But time_init() will start the time interrupt and if it is called with local interrupts enabled we'll immediately take an interrupt and die. Fix that by running timekeeping_init() prior to time_init(). We don't know _why_ local interrupts got enabled on Jesse Brandeburg's machine. That's a separate as-yet-unsolved problem. THe patch adds a little bit of debugging to detect that. This whole requirement that local interrupts be held off during early boot keeps on biting us. Signed-off-by:
John Stultz <johnstul@us.ibm.com> Cc: Jesse Brandeburg <jesse.brandeburg@gmail.com> Signed-off-by:
-
Thomas Gleixner authored
ARM devel merge introduced new machine functionality which was not covered by the ARM -> genirq patches. Fix it up and make it compile again. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Thomas Gleixner authored
For several proc-<cputype>.S files the include of proc-macros.S is missing. Make it compile and work again. Signed-off-by:
-
Thomas Gleixner authored
The irqflags consolidation converted SA_PERCPU_IRQ to IRQF_PERCPU but did not define the new constant. Signed-off-by:
-
Thomas Gleixner authored
The irgflags consolidation did conflict with the ARM to generic IRQ conversion and was not applied for ARM. Fix it up. Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by:
-
Thomas Gleixner authored
Linus: "The hacks in kernel/irq/handle.c are really horrid. REALLY horrid." They are indeed. Move the dyntick quirks to ARM where they belong. Signed-off-by:
-
- 02 Jul, 2006 29 commits
-
-
Linus Torvalds authored
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc: [MMC] sdhci: remove duplicate error message [MMC] sdhci: force DMA on some controllers [MMC] sdhci: quirk for broken reset [MMC] sdhci: Add SDHCI controller ids
-
Dominik Hackl authored
This fixes a bug in fs/nfs which makes it impossible to build nfs without having procfs enabled. Signed-off-by:
Dominik Hackl <dominik@hackl.dhs.org> Signed-off-by:
-
Linus Torvalds authored
* 'genirq' of master.kernel.org:/home/rmk/linux-2.6-arm: (24 commits) [ARM] 3683/2: ARM: Convert at91rm9200 to generic irq handling [ARM] 3682/2: ARM: Convert ixp4xx to generic irq handling [ARM] 3702/1: ARM: Convert ixp23xx to generic irq handling [ARM] 3701/1: ARM: Convert plat-omap to generic irq handling [ARM] 3700/1: ARM: Convert lh7a40x to generic irq handling [ARM] 3699/1: ARM: Convert s3c2410 to generic irq handling [ARM] 3698/1: ARM: Convert sa1100 to generic irq handling [ARM] 3697/1: ARM: Convert shark to generic irq handling [ARM] 3696/1: ARM: Convert clps711x to generic irq handling [ARM] 3694/1: ARM: Convert ecard driver to generic irq handling [ARM] 3693/1: ARM: Convert omap1 to generic irq handling [ARM] 3691/1: ARM: Convert imx to generic irq handling [ARM] 3688/1: ARM: Convert clps7500 to generic irq handling [ARM] 3687/1: ARM: Convert integrator to generic irq handling [ARM] 3685/1: ARM: Convert pxa to generic irq handling [ARM] 3684/1: ARM: Convert l7200 to generic irq handling [ARM] 3681/1: ARM: Convert ixp2000 to generic irq handling [ARM] 3680/1: ARM: Convert footbridge to generic irq handling [ARM] 3695/1: ARM drivers/pcmcia: Fixup includes [ARM] 3689/1: ARM drivers/input/touchscreen: Fixup includes ... Manual conflict resolved in kernel/irq/handle.c (butt-ugly ARM tickless code).
-
Linus Torvalds authored
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits) [ARM] 3541/2: workaround for PXA27x erratum E7 [ARM] nommu: provide a way for correct control register value selection [ARM] 3705/1: add supersection support to ioremap() [ARM] 3707/1: iwmmxt: use the generic thread notifier infrastructure [ARM] 3706/2: ep93xx: add cirrus logic edb9315a support [ARM] 3704/1: format IOP Kconfig with tabs, create more consistency [ARM] 3703/1: Add help description for ARCH_EP80219 [ARM] 3678/1: MMC: Make OMAP MMC work [ARM] 3677/1: OMAP: Update H2 defconfig [ARM] 3676/1: ARM: OMAP: Fix dmtimers and timer32k to compile on OMAP1 [ARM] Add section support to ioremap [ARM] Fix sa11x0 SDRAM selection [ARM] Set bit 4 on section mappings correctly depending on CPU [ARM] 3666/1: TRIZEPS4 [1/5] core ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE ARM: OMAP: Update dmtimers ARM: OMAP: Make clock variables static ARM: OMAP: Fix GPMC compilation when DEBUG is defined ARM: OMAP: Mux updates for external DMA and GPIO ...
-
Linus Torvalds authored
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc: [MMC] sdhci: version bump sdhci [MMC] sdhci: support controller specific quirks [MMC] sdhci: more DMA capabilities tests [MMC] sdhci: reset sdhci controller early [MMC] sdhci: check controller version [MMC] sdhci: check only relevant inhibit bits [MMC] sdhci: Test for invalid block size [MMC] sdhci: Avoid sdhci DMA boundaries [MMC] Fix sdhci PIO routines [MMC] sdhci: fix interrupt handling [MMC] sdhci: correct register order [MMC] sdhci: proper timeout handling [MMC] sdhci: fix sdhci reset timeout [MMC] sdhci: fix timeout loops in sdhci [MMC] sdhci: support for multiple voltages [MMC] sdhci: print device id [MMC] sdhci: check SDHCI base clock
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by:
-
Thomas Gleixner authored
Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by:
-
Thomas Gleixner authored
Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by:
-
Thomas Gleixner authored
Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by:
-
Thomas Gleixner authored
Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by:
-
