- 03 Nov, 2019 9 commits
-
-
Christoph Hellwig authored
Always set XFS_ALLOC_USERDATA for data fork allocations, and check it in xfs_alloc_is_userdata instead of the current obsfucated check. Also remove the xfs_alloc_is_userdata and xfs_alloc_allow_busy_reuse helpers to make the code a little easier to understand. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
Move the extent zeroing case there for the XFS_BMAPI_ZERO flag outside the low-level allocator and into xfs_bmapi_allocate, where is still is in transaction context, but outside the very lowlevel code where it doesn't belong. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
Avoid duplicate userdata and data fork checks by restructuring the code so we only have a helper for userdata allocations that combines these checks in a straight foward way. That also helps to obsoletes the comments explaining what the code does as it is now clearly obvious. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
Move the EOF alignment and checking for the next allocated extent into the callers to avoid the need to pass the byte based offset and count as well as looking at the incoming imap. The added benefit is that the caller can unlock the incoming ilock and the function doesn't have funny unbalanced locking contexts. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
Even if we are asked for a write layout there is no point in logging the inode unless we actually modified it in some way. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
We should never see delalloc blocks for a pNFS layout, write or not. Adjust the assert to check for that. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
And move the code dependent on it to the one caller that cares instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
By open coding xfs_bmap_last_extent instead of calling it through a double indirection we don't need to handle an error return that can't happen given that we are guaranteed to have the extent list in memory already. Also simplify the calling conventions a little and move the extent list assert from the only caller into the function. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
- 31 Oct, 2019 1 commit
-
-
Dave Chinner authored
AIO+DIO can extend the file size on IO completion, and it holds no inode locks while the IO is in flight. Therefore, a race condition exists in file size updates if we do something like this: aio-thread fallocate-thread lock inode submit IO beyond inode->i_size unlock inode ..... lock inode break layouts if (off + len > inode->i_size) new_size = off + len ..... inode_dio_wait() <blocks> ..... completes inode->i_size updated inode_dio_done() .... <wakes> <does stuff no long beyond EOF> if (new_size) xfs_vn_setattr(inode, new_size) Yup, that attempt to extend the file size in the fallocate code turns into a truncate - it removes the whatever the aio write allocated and put to disk, and reduced the inode size back down to where the fallocate operation ends. Fundamentally, xfs_file_fallocate() not compatible with racing AIO+DIO completions, so we need to move the inode_dio_wait() call up to where the lock the inode and break the layouts. Secondly, storing the inode size and then using it unchecked without holding the ILOCK is not safe; we can only do such a thing if we've locked out and drained all IO and other modification operations, which we don't do initially in xfs_file_fallocate. It should be noted that some of the fallocate operations are compound operations - they are made up of multiple manipulations that may zero data, and so we may need to flush and invalidate the file multiple times during an operation. However, we only need to lock out IO and other space manipulation operations once, as that lockout is maintained until the entire fallocate operation has been completed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
- 29 Oct, 2019 19 commits
-
-
Christoph Hellwig authored
No need for a trivial wrapper. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
inode64 is the only value remaining in the unset array. Special case the inode32/64 options with an explicit seq_printf that prints either inode32 or inode64, and remove the unset array. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
Remove superflous cast. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
Replace XFS_MOUNT_COMPAT_IOSIZE with an inverted XFS_MOUNT_LARGEIO flag that makes the usage more clear. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
Make the flag match the mount option and usage. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
Rework xfs_parseargs to fill out the default value and then parse the option directly into the mount structure, similar to what we do for other updates, and open code the now trivial updates based on on the on-disk superblock directly into xfs_mountfs. Note that this change rejects the allocsize=0 mount option that has been documented as invalid for a long time instead of just ignoring it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
Use the allocsize name to match the mount option and usage instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
m_readio_blocks is entirely unused, and m_readio_blocks is only used in xfs_stat_blksize in a max statements that is a no-op as it always has the same value as m_writeio_log. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
The -o wsync allocsize overwrite overwrite was part of a special hack for NFSv2 servers in IRIX and has no real purpose in modern Linux, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
Move xfs_preferred_iosize to xfs_iops.c, unobsfucate it and also handle the realtime special case in the helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
There is no real need for the local variables here - either they are applied to the mount structure, or if the noalign mount option is set the mount will fail entirely if either is set. Removing them helps cleaning up the mount API conversion. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Ian Kent authored
It appears the biosize mount option hasn't been documented as a valid option since 2005, remove it. Signed-off-by: Ian Kent <raven@themaw.net> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
Stop using the deprecated bio_set_op_attrs helper, and use a single argument to xfs_buf_ioapply_map for the operation and flags. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Darrick J. Wong authored
xfs_iread_extents open-codes everything in xfs_btree_visit_blocks, so refactor the btree helper to be able to iterate only the records on level 0, then port iread_extents to use it. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
-
Darrick J. Wong authored
Currently, this function open-codes walking a bmbt to count the extents and blocks in use by a particular inode fork. Since we now have a function to tally extent records from the incore extent tree and a btree helper to count every block in a btree, replace all that with calls to the helpers. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
-
Darrick J. Wong authored
There are a few places where we return -EIO instead of -EFSCORRUPTED when we find corrupt metadata. Fix those places. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com>
-
Darrick J. Wong authored
Actually call namecheck on directory entry names before we hand them over to userspace. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com>
-
Darrick J. Wong authored
Actually call namecheck on attribute names before we hand them over to userspace. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
-
Darrick J. Wong authored
Add missing structure checks in the attribute leaf verifier. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
-
- 28 Oct, 2019 8 commits
-
-
Christoph Hellwig authored
Remove xfs_zero_file_space and reorganize xfs_file_fallocate so that a single call to xfs_alloc_file_space covers all modes that preallocate blocks. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
If we always have to write out of place preallocating blocks is pointless. We already check for this in the normal falloc path, but the check was missig in the legacy ALLOCSP path. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
These use the same scheme as the pre-existing mapping of the XFS RESVP ioctls to ->falloc, so just extend it and remove the XFS implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> [darrick: fix compile error on s390] Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
These ioctls are implemented by the VFS and mapped to ->fallocate now, so this code won't ever be reached. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
Add a new xfs_inode_buftarg helper that gets the data I/O buftarg for a given inode. Replace the existing xfs_find_bdev_for_inode and xfs_find_daxdev_for_inode helpers with this new general one and cleanup some of the callers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
- 24 Oct, 2019 3 commits
-
-
Jan Kara authored
Flags passed to Q_XQUOTARM were not sanity checked for invalid values. Fix that. Fixes: 9da93f9b ("xfs: fix Q_XQUOTARM ioctl") Reported-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Ben Dooks (Codethink) authored
The xfs_pnfs.c file is missing an include of xfs_pnfs.h to add the prototypes of the functions it exports. Include this file to fix the following sparse warnings: fs/xfs/xfs_pnfs.c:27:1: warning: symbol 'xfs_break_leased_layouts' was not declared. Should it be static? fs/xfs/xfs_pnfs.c:52:1: warning: symbol 'xfs_fs_get_uuid' was not declared. Should it be static? fs/xfs/xfs_pnfs.c:77:1: warning: symbol 'xfs_fs_map_blocks' was not declared. Should it be static? fs/xfs/xfs_pnfs.c:226:1: warning: symbol 'xfs_fs_commit_blocks' was not declared. Should it be static? Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Brian Foster authored
xfs_bmapi_write() takes a total block requirement parameter that is passed down to the block allocation code and is used to specify the total block requirement of the associated transaction. This is used to try and select an AG that can not only satisfy the requested extent allocation, but can also accommodate subsequent allocations that might be required to complete the transaction. For example, additional bmbt block allocations may be required on insertion of the resulting extent to an inode data fork. While it's important for callers to calculate and reserve such extra blocks in the transaction, it is not necessary to pass the total value to xfs_bmapi_write() in all cases. The latter automatically sets minleft to ensure that sufficient free blocks remain after the allocation attempt to expand the format of the associated inode (i.e., such as extent to btree conversion, btree splits, etc). Therefore, any callers that pass a total block requirement of the bmap mapping length plus worst case bmbt expansion essentially specify the additional reservation requirement twice. These callers can pass a total of zero to rely on the bmapi minleft policy. Beyond being superfluous, the primary motivation for this change is that the total reservation logic in the bmbt code is dubious in scenarios where minlen < maxlen and a maxlen extent cannot be allocated (which is more common for data extent allocations where contiguity is not required). The total value is based on maxlen in the xfs_bmapi_write() caller. If the bmbt code falls back to an allocation between minlen and maxlen, that allocation will not succeed until total is reset to minlen, which essentially throws away any additional reservation included in total by the caller. In addition, the total value is not reset until after alignment is dropped, which means that such callers drop alignment far too aggressively than necessary. Update all callers of xfs_bmapi_write() that pass a total block value of the mapping length plus bmbt reservation to instead pass zero and rely on xfs_bmapi_minleft() to enforce the bmbt reservation requirement. This trades off slightly less conservative AG selection for the ability to preserve alignment in more scenarios. xfs_bmapi_write() callers that incorporate unrelated or additional reservations in total beyond what is already included in minleft must continue to use the former. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-