- 28 Oct, 2010 40 commits
-
-
Kyungmin Park authored
As each board and system has different memory for ramoops. It's better to define the platform data instead of module params. [akpm@linux-foundation.org: fix ramoops_remove() return type] Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Cc: Marco Stornelli <marco.stornelli@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Huang Shijie authored
If the same resource is inserted to the resource tree (maybe not on purpose), a dead loop will be created. In this situation, The kernel does not report any warning or error :( The command below will show a endless print. #cat /proc/iomem [akpm@linux-foundation.org: add WARN_ON()] Signed-off-by:
Huang Shijie <shijie8@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
Stefani Seibold authored
Add a new __kfifo_int_must_check_helper() helper function, which is needed for kfifo_alloc() to return the right signed integer value. The origin __kfifo_must_check_helper() helper was renamed into __kfifo_uint_must_check_helper() to show the sign which is expected and returned. (And revert the temporary disabling of __kfifo_must_check_helper()) Signed-off-by:
Stefani Seibold <stefani@seibold.net> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Brian Swetland authored
The search/pullup/add/remove device attributes were 0666 which would allow arbitrary users to affect the 1 wire bus. Change to 0664 to prevent that. I found this patch in the Android tree, apparently this has never been sent upstream so doing it now. Signed-off-by:
Brian Swetland <swetland@google.com> Signed-off-by:
Linus Walleij <linus.walleij@stericsson.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by:
-
FUJITA Tomonori authored
dma_addr_t is always 64 bit on alpha. So let's use dma_addr_t instead. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by:
-
FUJITA Tomonori authored
dma64_addr_t looks pointless (at least there is no point that an architecture has the own dma64_addr_t typedef). dma_addr_t is set to 32 or 64 bits appropriately. You can use u64 at places where you know that 64 bit address is always necessary. Let's use u64 instead for mips. Signed-off-by:
-
FUJITA Tomonori authored
dma64_addr_t looks pointless (at least there is no point that an architecture has the own dma64_addr_t typedef). dma_addr_t is set to 32 or 64 bits appropriately. You can use u64 at places where you know that 64 bit address is always necessary. Let's use u64 instead for sparc32. Looks like PCI654_REQUIRED_MASK or PCI64_ADR_BASE isn't used. They can be removed? Signed-off-by:
David Miller <davem@davemloft.net> Signed-off-by:
-
Miklos Szeredi authored
Replace iterated page_cache_release() with release_pages(), which is faster and shorter. Needs release_pages() to be exported to modules. Suggested-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Michael Holzheu authored
The taskstats interface uses microsecond granularity for the user and system time values. The conversion from cputime to the taskstats values uses the cputime_to_msecs primitive which effectively limits the granularity to milliseconds. Add the cputime_to_usecs primitive for architectures that have better, more precise CPU time values. Remove cputime_to_msecs primitive because there are no more users left. Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Luck Tony <tony.luck@intel.com> Cc: Shailabh Nagar <nagar1234@in.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Shailabh Nagar <nagar@us.ibm.com> Signed-off-by:
-
Michael Holzheu authored
Separate the finding of a task_struct by pid or tgid from filling the taskstats data. This makes the code more readable. Signed-off-by:
-
Michael Holzheu authored
Move each taskstats command into a single function. This makes the code more readable and makes it easier to add new commands. Signed-off-by:
-
Jeff Mahoney authored
prepare_reply() sets up an skb for the response. The payload contains: +--------------------------------+ | genlmsghdr - 4 bytes | +--------------------------------+ | NLA header - 4 bytes | /* Aggregate header */ +-+------------------------------+ | | NLA header - 4 bytes | /* PID header */ | +------------------------------+ | | pid/tgid - 4 bytes | | +------------------------------+ | | NLA header - 4 bytes | /* stats header */ | + -----------------------------+ <- oops. aligned on 4 byte boundary | | struct taskstats - 328 bytes | +-+------------------------------+ The start of the taskstats struct must be 8 byte aligned on IA64 (and other systems with 8 byte alignment rules for 64-bit types) or runtime alignment warnings will be issued. This patch pads the pid/tgid field out to sizeof(long), which forces the alignment of taskstats. The getdelays userspace code is ok with this since it assumes 32-bit pid/tgid and then honors that header's length field. An array is used to avoid exposing kernel memory contents to userspace in the response. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by:
-
Mel Gorman authored
Task delay-accounting was identified as one means of determining how long a process spends in congestion_wait() without adding new statistics. For example, if the workload should not be doing IO, delay-accounting could reveal how long it was spending in unexpected IO or delays. Unfortunately, on closer examination it was clear that getdelays does not act as documented. Commit a3baf649 ("per-task-delay-accounting: documentation") added Documentation/accounting/getdelays.c with a -c switch that was documented to fork/exec a child and report statistics on it but for reasons that are unclear to me, commit 9e06d3f9 deleted support for this switch but did not update the documentation. It might be an oversight or it might be because the control flow of the program meant that accounting information would be printed once early in the lifetime of the program making it of limited use. This patch reimplements -c for getdelays.c to act as documented. Unlike the original version, it waits until the command completes before printing any information on it. An example of it being used looks like $ ./getdelays -d -c find /home/mel -name mel print delayacct stats ON /home/mel /home/mel/.notes-wine/drive_c/windows/profiles/mel /home/mel/.wine/drive_c/windows/profiles/mel /home/mel/git-configs/dot.kde/share/apps/konqueror/home/mel PID 5923 CPU count real total virtual total delay total 42779 5051232096 5164722692 564207988 IO count delay total 41727 97804147758 SWAP count delay total 0 0 RECLAIM count delay total 0 0 [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Mel Gorman <mel@csn.ul.ie> Acked-by:
Balbir Singh <balbir@in.ibm.com> Signed-off-by:
-
Daniel Lezcano authored
We have the namespaces as a menuconfig like the cgroup. The cgroup and the namespace are two base bricks for the containers. It is more logical to put the namespace menu right after the cgroup menu. Signed-off-by:
Daniel Lezcano <daniel.lezcano@free.fr> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: "Serge E. Hallyn" <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Paul Menage <menage@google.com> Signed-off-by:
-
Daniel Lezcano authored
This subsystem is merged since a long time now, I think we can consider it mature enough. Signed-off-by:
-
Daniel Lezcano authored
The different cgroup subsystems are under the cgroup submenu. The dependency between the cgroups and the menu subsystems is pointless. Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Cc: "Serge E. Hallyn" <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Paul Menage <menage@google.com> Signed-off-by:
-
Daniel Lezcano authored
Make the namespaces config option a submenu. Signed-off-by:
-
Daniel Lezcano authored
As the different namespaces depend on 'CONFIG_NAMESPACES', it is logical to enable all the namespaces when we enable NAMESPACES. Signed-off-by:
Matt Helsley <matthltc@us.ibm.com> Acked-by:
Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by:
-
Daniel Lezcano authored
The pid namespace is in the kernel since 2.6.27 and the net_ns since 2.6.29. They are enabled in the distro by default and used by userspace component. They are mature enough to remove the 'experimental' label. Signed-off-by:
-
Alexandre Bounine authored
Replace possibly damaging broadcast writes into the per-port SP_MODE registers with individual writes for each port. This will preserve individual port configurations in case if ports are configured differently. Signed-off-by:
Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by:
-
Alexandre Bounine authored
Replace hardcoded maximum port number with actual reported number of switch ports. Signed-off-by:
-
Alexandre Bounine authored
RapidIO spec v.2.1 adds Idle Sequence 2 into LP-Serial Physical Layer. The fix ensures that corresponding bits are not corrupted during error handling. Signed-off-by:
-
Alexandre Bounine authored
Detects RIO link to the already enumerated device and properly sets links between device objects. Changes to the enumeration/discovery logic: 1. Use Master Enable bit to signal end of the enumeration - agents may start their discovery process as soon as they see this bit set (Component Tag register was used before for this purpose). 2. Enumerator sets Component Tag (!= 0) immediately during device setup. This allows to identify the device if the redundant route exists in a RIO system. Signed-off-by:
-
Alexandre Bounine authored
Add the RIO switch driver and definitions for IDT CPS-1848 and CPS-1616 Gen2 devices. Signed-off-by:
-
Alexandre Bounine authored
Add explicit device access check before performing device enumeration. This gives a chance to clear possible link error conditions by issuing safe maintenance read request(s). Signed-off-by:
-
Alexandre Bounine authored
Add check for access to port-write (PW) message source device before processing the PW message. If source RIO device is not available (power down or RIO link failure) trace back to a last available switch/port on the PW message route and service failure at that point. Signed-off-by:
-
Alexandre Bounine authored
1. Change to create attribute "routes" only for switches. 2. Add a switch-specific callback to create/remove proprietary attributes. Signed-off-by:
-
Alexandre Bounine authored
The default error-stopped state handler provides recovery mechanism as defined by RIO specification. Signed-off-by:
-
Alexandre Bounine authored
Create back and forward links between RIO devices. These links are intended for use by error management and hot-plug extensions. Links for redundant RIO connections between switches are not set (will be fixed in a separate patch). Signed-off-by:
-
Alexandre Bounine authored
The switch port information is obtained and stored during RIO device setup. Therefore repeated reads from Switch Port Information CAR may be removed. Signed-off-by:
-
Alexandre Bounine authored
- Rearrange RIO port-write interrupt handling to perform message buffering as soon as possible. - Modify to disable port-write controller when clearing Transaction Error (TE) bit. Signed-off-by:
-
Alexandre Bounine authored
This set of RapidIO patches extends support for standard error recovery mechanism and adds new IDT Gen2 sRIO switch devices - CPS-1848 and CPS-1616. Implementation of the standard error-stopped state recovery mechanism (as defined by the RapidIO specification) is required for the new switches. Version 2 of this set of patches addresses received comments and fixes an error notification setup issue found in the idt_gen2.c after the first version was released. This patch: Make RapidIO devices appear in /sys/devices/rapidio directory instead of top of /sys/devices directory. Signed-off-by:
-
Rakib Mullick authored
Both mxser_disable_must_enchance_mode() and mxser_get_must_hardware_id() called from function CheckIsMoxaMust(), when CONFIG_PCI=y. So mark both the functions under CONFIG_PCI. We were warned by the following warning. drivers/char/mxser.c:306: warning: `mxser_disable_must_enchance_mode' defined but not used drivers/char/mxser.c:391: warning: `mxser_get_must_hardware_id' defined but not used Signed-off-by:
Rakib Mullick <rakib.mullick@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Tracey Dent authored
Changed <module>-objs to <module>-y in Makefile. Signed-off-by:
Tracey Dent <tdent48227@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Tracey Dent authored
Changed <module>-objs to <module>-y in Makefile. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Acked-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
-
Tracey Dent authored
Changed <module>-objs to <module>-y in Makefile and use ccflags-y option. Signed-off-by:
-
Tracey Dent authored
Changed <module>-objs to <module>-y in Makefile. Signed-off-by:
-
Tracey Dent authored
Changed <module>-objs to <module>-y in Makefile. Signed-off-by:
-
Paul Fulghum authored
Add support for extended byte synchronous mode feature of hardware. Signed-off-by:
Paul Fulghum <paulkf@microgate.com> Signed-off-by:
-
Vasiliy Kulikov authored
Structures tmp_params and new_line are copied to userland with some padding fields unitialized. It leads to leaking of stack memory. Signed-off-by:
Vasiliy Kulikov <segooon@gmail.com> Acked-by:
-
