- 02 Jul, 2018 2 commits
-
-
Alex Deucher authored
new_active_crtcs is a bitmask, new_active_crtc_count is the actual count. Reviewed-by:
Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
The phys and vm versions had the values swapped. Reviewed-by:
Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by:
-
- 28 Jun, 2018 6 commits
-
-
Lyude Paul authored
The other day I was testing one of the HP laptops at my office with an i915/amdgpu hybrid setup and noticed that hotplugging was non-functional on almost all of the display outputs. I eventually discovered that all of the external outputs were connected to the amdgpu device instead of i915, and that the hotplugs weren't being detected so long as the GPU was in runtime suspend. After some talking with folks at AMD, I learned that amdgpu is actually supposed to support hotplug detection in runtime suspend so long as the OEM has implemented it properly in the firmware. On this HP ZBook 15 G4 (the machine in question), amdgpu wasn't managing to find the ATIF handle at all despite the fact that I could see acpi events being sent in response to any hotplugging. After going through dumps of the firmware, I discovered that this machine did in fact support ATIF, but that it's ATIF method lived in an entirely different namespace than this device's handle (the device handle was \_SB_.PCI0.PEG0.PEGP, but ATIF lives in ATPX's handle at \_SB_.PCI0.GFX0). So, fix this by probing ATPX's ACPI parent's namespace if we can't find ATIF elsewhere, along with storing a pointer to the proper handle to use for ATIF and using that instead of the device's handle. This fixes HPD detection while in runtime suspend for this ZBook! v2: Update the comment to reflect how the namespaces are arranged based on the system configuration. (Alex) Signed-off-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Lyude Paul authored
Since it seems that some vendors are storing the ATIF ACPI methods under the same handle that ATPX lives under instead of the device's own handle, we're going to need to be able to retrieve this handle later so we can probe for ATIF there. Signed-off-by:
-
Lyude Paul authored
Currently, there is nothing in amdgpu that actually uses these structs other than amdgpu_acpi.c. Additionally, since we're about to start saving the correct ACPI handle to use for calling ATIF in this struct this saves us from having to handle making sure that the acpi_handle (and by proxy, the type definition for acpi_handle and all of the other acpi headers) doesn't need to be included within the amdgpu_drv struct itself. This follows the example set by amdgpu_atpx_handler.c. Signed-off-by:
-
Evan Quan authored
A new member Vr2_I2C_address is added. Signed-off-by:
Evan Quan <evan.quan@amd.com> Acked-by:
-
Evan Quan authored
The vbios firmware structure changed between v3_1 and v3_2. So, the code to setup bootup values needs different paths based on header version. Signed-off-by:
-
Evan Quan authored
Thermal support is enabled on vega12. Signed-off-by:
-
- 27 Jun, 2018 3 commits
-
-
Shirish S authored
Currently, amdgpu_do_flip() spinlocks crtc->dev->event_lock and releases it only after committing updates to the stream. dc_commit_updates_for_stream() should be moved out of spinlock for the below reasons: 1. event_lock is supposed to protect access to acrct->pflip_status _only_ 2. dc_commit_updates_for_stream() has potential sleep's and also its not appropriate to be in an atomic state for such long sequences of code. Signed-off-by:
Shirish S <shirish.s@amd.com> Suggested-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
James Zhu authored
Support new VCN FW version naming convention: [31, 28] for VEP interface major version if applicable [27, 24] for decode interface major version [23, 20] for encode interface major version [19, 12] for encode interface minor version [11, 0] for firmware revision Bit 20-23, it is encode major and non-zero for new naming convention. This field is part of version minor and DRM_DISABLED_FLAG in old naming convention. Since the latest version minor is 0x5B and DRM_DISABLED_FLAG is zero in old naming convention, this field is always zero so far. These four bits are used to tell which naming convention is present. Signed-off-by:
James Zhu <James.Zhu@amd.com> Reviewed-by:
Fang, Peter <Peter.Fang@amd.com> Signed-off-by:
-
Leo Liu authored
Here is the UBSAN dump: [ 3.866656] index 2 is out of range for type 'amdgpu_uvd_inst [2]' [ 3.866693] Workqueue: events work_for_cpu_fn [ 3.866702] Call Trace: [ 3.866710] dump_stack+0x85/0xc5 [ 3.866719] ubsan_epilogue+0x9/0x40 [ 3.866727] __ubsan_handle_out_of_bounds+0x89/0x90 [ 3.866737] ? rcu_read_lock_sched_held+0x58/0x60 [ 3.866746] ? __kmalloc+0x26c/0x2d0 [ 3.866846] amdgpu_fence_driver_start_ring+0x259/0x280 [amdgpu] [ 3.866896] amdgpu_ring_init+0x12c/0x710 [amdgpu] [ 3.866906] ? sprintf+0x42/0x50 [ 3.866956] amdgpu_gfx_kiq_init_ring+0x1bc/0x3a0 [amdgpu] [ 3.867009] gfx_v8_0_sw_init+0x1ad3/0x2360 [amdgpu] [ 3.867062] ? smu7_init+0xec/0x160 [amdgpu] [ 3.867109] amdgpu_device_init+0x112c/0x1dc0 [amdgpu] 'ring->me' might be set as 2 with 'amdgpu_gfx_kiq_init_ring', that would cause out of range for 'amdgpu_uvd_inst[2]'. v2: simplified with ring type Signed-off-by:
Leo Liu <leo.liu@amd.com> Reviewed-by:
-
- 22 Jun, 2018 3 commits
-
-
Michel Dänzer authored
start / last / max_entries are numbers of GPU pages, pfn / count are numbers of CPU pages. Convert between them accordingly. Fixes badness on systems with > 4K page size. Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/106258Reported-by:
Matt Corallo <freedesktop@bluematt.me> Tested-by: foxbat@ruin.net Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Lyude Paul authored
This fixes a regression I accidentally reduced that was picked up by kasan, where we were checking the CRTC atomic states after DRM's helpers had already freed them. Example: ================================================================== BUG: KASAN: use-after-free in amdgpu_dm_atomic_commit_tail.cold.50+0x13d/0x15a [amdgpu] Read of size 1 at addr ffff8803a697b071 by task kworker/u16:0/7 CPU: 7 PID: 7 Comm: kworker/u16:0 Tainted: G O 4.18.0-rc1Lyude-Upstream+ #1 Hardware name: HP HP ZBook 15 G4/8275, BIOS P70 Ver. 01.21 05/02/2018 Workqueue: events_unbound commit_work [drm_kms_helper] Call Trace: dump_stack+0xc1/0x169 ? dump_stack_print_info.cold.1+0x42/0x42 ? kmsg_dump_rewind_nolock+0xd9/0xd9 ? printk+0x9f/0xc5 ? amdgpu_dm_atomic_commit_tail.cold.50+0x13d/0x15a [amdgpu] print_address_description+0x6c/0x23c ? amdgpu_dm_atomic_commit_tail.cold.50+0x13d/0x15a [amdgpu] kasan_report.cold.6+0x241/0x2fd amdgpu_dm_atomic_commit_tail.cold.50+0x13d/0x15a [amdgpu] ? commit_planes_to_stream.constprop.45+0x13b0/0x13b0 [amdgpu] ? cpu_load_update_active+0x290/0x290 ? finish_task_switch+0x2bd/0x840 ? __switch_to_asm+0x34/0x70 ? read_word_at_a_time+0xe/0x20 ? strscpy+0x14b/0x460 ? drm_atomic_helper_wait_for_dependencies+0x47d/0x7e0 [drm_kms_helper] commit_tail+0x96/0xe0 [drm_kms_helper] process_one_work+0x88a/0x1360 ? create_worker+0x540/0x540 ? __sched_text_start+0x8/0x8 ? move_queued_task+0x760/0x760 ? call_rcu_sched+0x20/0x20 ? vsnprintf+0xcda/0x1350 ? wait_woken+0x1c0/0x1c0 ? mutex_unlock+0x1d/0x40 ? init_timer_key+0x190/0x230 ? schedule+0xea/0x390 ? __schedule+0x1ea0/0x1ea0 ? need_to_create_worker+0xe4/0x210 ? init_worker_pool+0x700/0x700 ? try_to_del_timer_sync+0xbf/0x110 ? del_timer+0x120/0x120 ? __mutex_lock_slowpath+0x10/0x10 worker_thread+0x196/0x11f0 ? flush_rcu_work+0x50/0x50 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __schedule+0x7d6/0x1ea0 ? migrate_swap_stop+0x850/0x880 ? __sched_text_start+0x8/0x8 ? save_stack+0x8c/0xb0 ? kasan_kmalloc+0xbf/0xe0 ? kmem_cache_alloc_trace+0xe4/0x190 ? kthread+0x98/0x390 ? ret_from_fork+0x35/0x40 ? ret_from_fork+0x35/0x40 ? deactivate_slab.isra.67+0x3c4/0x5c0 ? kthread+0x98/0x390 ? kthread+0x98/0x390 ? set_track+0x76/0x120 ? schedule+0xea/0x390 ? __schedule+0x1ea0/0x1ea0 ? wait_woken+0x1c0/0x1c0 ? kasan_unpoison_shadow+0x30/0x40 ? parse_args.cold.15+0x17a/0x17a ? flush_rcu_work+0x50/0x50 kthread+0x2d4/0x390 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x35/0x40 Allocated by task 1124: kasan_kmalloc+0xbf/0xe0 kmem_cache_alloc_trace+0xe4/0x190 dm_crtc_duplicate_state+0x78/0x130 [amdgpu] drm_atomic_get_crtc_state+0x147/0x410 [drm] page_flip_common+0x57/0x230 [drm_kms_helper] drm_atomic_helper_page_flip+0xa6/0x110 [drm_kms_helper] drm_mode_page_flip_ioctl+0xc4b/0x10a0 [drm] drm_ioctl_kernel+0x1d4/0x260 [drm] drm_ioctl+0x433/0x920 [drm] amdgpu_drm_ioctl+0x11d/0x290 [amdgpu] do_vfs_ioctl+0x1a1/0x13d0 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x6f/0xb0 do_syscall_64+0x147/0x440 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 1124: __kasan_slab_free+0x12e/0x180 kfree+0x92/0x1a0 drm_atomic_state_default_clear+0x315/0xc40 [drm] __drm_atomic_state_free+0x35/0xd0 [drm] drm_atomic_helper_update_plane+0xac/0x350 [drm_kms_helper] __setplane_internal+0x2d6/0x840 [drm] drm_mode_cursor_universal+0x41e/0xbe0 [drm] drm_mode_cursor_common+0x49f/0x880 [drm] drm_mode_cursor_ioctl+0xd8/0x130 [drm] drm_ioctl_kernel+0x1d4/0x260 [drm] drm_ioctl+0x433/0x920 [drm] amdgpu_drm_ioctl+0x11d/0x290 [amdgpu] do_vfs_ioctl+0x1a1/0x13d0 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x6f/0xb0 do_syscall_64+0x147/0x440 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff8803a697b068 which belongs to the cache kmalloc-1024 of size 1024 The buggy address is located 9 bytes inside of 1024-byte region [ffff8803a697b068, ffff8803a697b468) The buggy address belongs to the page: page:ffffea000e9a5e00 count:1 mapcount:0 mapping:ffff88041e00efc0 index:0x0 compound_mapcount: 0 flags: 0x8000000000008100(slab|head) raw: 8000000000008100 ffffea000ecbc208 ffff88041e000c70 ffff88041e00efc0 raw: 0000000000000000 0000000000170017 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8803a697af00: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8803a697af80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8803a697b000: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb ^ ffff8803a697b080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8803a697b100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== So, we fix this by counting the number of CRTCs this atomic commit disabled early on in the function before their atomic states have been freed, then use that count later to do the appropriate number of RPM puts at the end of the function. Acked-by:Michel Dänzer <michel@daenzer.net> Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Fixes for v4.18-rc2: - A reversion of a commit in drm/sun4i to fix a run-time fault. - Various fixes to the sii8620 bridge. - Small bugfix to correctly check stride in atmel-hlcdc. Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/787d4bef-a579-4046-d0fc-f8c2c5b80c25@linux.intel.com
-
- 21 Jun, 2018 3 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2018-06-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v4.18-rc2: - Mostly cc: stable display fixes, including a DBLSCAN regression fix - GEM fixes for this merge window Signed-off-by:
-
Maciej Purski authored
Currently packed pixel modes in MHL2 can't be displayed. The device automatically recognizes output format, so setting format other than RGB causes failure. Fix it by writing proper values to registers. Tested on MHL1 and MHL2 using various vendors' dongles both in DVI and HDMI mode. Signed-off-by:
Maciej Purski <m.purski@samsung.com> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1516706239-9104-1-git-send-email-m.purski@samsung.com
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Bunch of amdgpu fixes mostly all going to stable. Signed-off-by:
-
- 20 Jun, 2018 3 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Only a small qxl fix that was queued for v4.17. Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2018-06-15' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Single fix for v4.18: - Fix possible race conditions while unplugging DRM device. Signed-off-by:
-
git://github.com/skeggsb/linuxDave Airlie authored
Single nouveau regression fix. Signed-off-by:
-
- 19 Jun, 2018 16 commits
-
-
Michel Dänzer authored
Even BOs with AMDGPU_GEM_CREATE_NO_CPU_ACCESS may end up at least partially in CPU visible VRAM, in particular when all VRAM is visible. v2: * Don't take VRAM mgr spinlock, not needed (Christian König) * Make loop logic simpler and clearer. Cc: stable@vger.kernel.org Signed-off-by:
-
Michel Dänzer authored
Preparation for the following fix, no functional change intended. Cc: stable@vger.kernel.org Signed-off-by:
-
Michel Dänzer authored
At least in theory, ttm_bo_validate may move the BO, in which case the pin_size accounting would be inconsistent with when the BO was pinned. Cc: stable@vger.kernel.org Signed-off-by:
-
James Zhu authored
All UVD instanses have only one dpm control, so it is better to share one idle_work handle. Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
-
Harry Wentland authored
We've had a number of users report failures to detect and light up display with DC with LVDS and VGA. These connector types are not currently supported with DC. I'd like to add support but unfortunately don't have a system with LVDS or VGA available. In order not to cause regressions we should probably fallback to the non-DC driver for ASICs that support VGA and LVDS. These ASICs are: * Bonaire * Kabini * Kaveri * Mullins ASIC support can always be force enabled with amdgpu.dc=1 v2: Keep Hawaii on DC v3: Added Mullins to the list Cc: stable@vger.kernel.org Signed-off-by:
-
Michel Dänzer authored
It can be quite big, and there's no need for it to be physically contiguous. This is less likely to fail under memory pressure (has actually happened while running piglit). Cc: stable@vger.kernel.org Signed-off-by:
-
Rajan Vaja authored
Initialize variable to 0 before performing logical OR operation. Reviewed-by:
Rajan Vaja <rajan.vaja@gmail.com> Signed-off-by:
-
Kenneth Graunke authored
The SF and clipper units mishandle the provoking vertex in some cases, which can cause misrendering with shaders that use flat shaded inputs. There are chicken bits in 3D_CHICKEN3 (for SF) and FF_SLICE_CHICKEN (for the clipper) that work around the issue. These registers are unfortunately not part of the logical context (even the power context), and so we must reload them every time we start executing in a context. Bugzilla: https://bugs.freedesktop.org/103047Signed-off-by:
Kenneth Graunke <kenneth@whitecape.org> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180615190605.16238-1-chris@chris-wilson.co.ukReviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org (cherry picked from commit b77422f8) Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Mika Kuoppala authored
If client is smart or lucky enough to create a new context after each hang, our context banning mechanism will never catch up, and as a result of that it will be saved from client banning. This can result in a never ending streak of gpu hangs caused by bad or malicious client, preventing access from other legit gpu clients. Fix this by always incrementing per client ban score if it hangs in short successions regardless of context ban scoring. The exception are non bannable contexts. They remain detached from client ban scoring mechanism. v2: xchg timestamp, tidyup (Chris) v3: comment, bannable & banned together (Chris) Fixes: b083a087 ("drm/i915: Add per client max context ban limit") Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
-
Ville Syrjälä authored
While Bspec doesn't list a specific sequence for turning off the DP port on g4x we are getting an underrun if the port is disabled in the .disable() hook. Looks like the pipe stops when the port stops, and by that time the plane disable may not have completed yet. Also the plane(s) seem to end up in some wonky state when this happens as they also signal another underrun immediately after we turn them back on during the next enable sequence. We could add a vblank wait in .disable() to avoid wedging the planes, but I assume we're still tripping up the pipe in some way. So it seems better to me to just follow the ILK+ sequence and turn off the DP port in .post_disable() instead. This sequence doesn't seem to suffer from this problem. Could be it was always the intended sequence for DP and the gen4 bspec was just never updated to include it. Originally we used the bad sequence even on ilk+, but I changed that in commit 08aff3fe ("drm/i915: Move DP port disable to post_disable for pch platforms") as it was causing issues on those platforms as well. I left out g4x then only because I didn't have the hardware to test it. Now that I do it's fairly clear that the ilk+ sequence is also the right choice for g4x. v2: Fix whitespace fail (Jani) Mention the ilk+ commit (Jani) Cc: stable@vger.kernel.org Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180613160553.11664-2-ville.syrjala@linux.intel.comReviewed-by:
-
Ville Syrjälä authored
Looks like interlaced DP output doesn't work on g4x either. Not all that surprising considering we already established that interlaced DP output is busted on VLV/CHV. Cc: stable@vger.kernel.org Signed-off-by:
-
Ville Syrjälä authored
On i965/g4x IIR is edge triggered. So in order for IIR to notice that there is still a pending interrupt we have to force and edge in ISR. For the ISR/IIR pipe event bits we can do that by temporarily clearing all the PIPESTAT enable bits when we ack the status bits. This will force the ISR pipe event bit low, and it can then go back high when we restore the PIPESTAT enable bits. This avoids the following race: 1. stat = read(PIPESTAT) 2. an enabled PIPESTAT status bit goes high 3. write(PIPESTAT, enable|stat); 4. write(IIR, PIPE_EVENT) The end result is IIR==0 and ISR!=0. This can lead to nasty vblank wait/flip_done timeouts if another interrupt source doesn't trick us into looking at the PIPESTAT status bits despite the IIR PIPE_EVENT bit being low. Before i965 IIR was level triggered so this problem can't actually happen there. And curiously VLV/CHV went back to the level triggered scheme as well. But for simplicity we'll use the same i965/g4x compatible code for all platforms. Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106033 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105225 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106030Signed-off-by:
-
Ville Syrjälä authored
When encountering a connector with the scaling mode property both intel and modesetting ddxs sometimes add tons of DBLSCAN modes to the output's mode list. The idea presumably being that since the output will be going through the panel fitter anyway we can pretend to use any kind of mode. Sadly that means we can't reject user modes with the DBLSCAN flag until we know whether we're going to be using the panel's native mode or the user mode directly. Doing otherwise means X clients using xf86vidmode/xrandr will get a protocol error (and often self terminate as a result) when the kernel refuses to use the requested mode with the DBLSCAN flag. To undo the regression we'll move the DBLSCAN checks into the connector->mode_valid() and encoder->compute_config() hooks. Cc: stable@vger.kernel.org Cc: Vito Caputo <vcaputo@pengaru.com> Reported-by:
Vito Caputo <vcaputo@pengaru.com> Fixes: e995ca0b ("drm/i915: Provide a device level .mode_valid() hook") References: https://lkml.org/lkml/2018/5/21/715Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106804Tested-by:
Arkadiusz Miskiewicz <arekm@maven.pl> (cherry picked from commit e4dd27aa) Signed-off-by:
-
Chris Wilson authored
On allocation error, do not jump to the unwind handler that tries to free the error pointer. Reported-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: a89d1f92 ("drm/i915: Split i915_gem_timeline into individual timelines") Signed-off-by:
-
Chris Wilson authored
We special case the position of the batch within the GTT to prevent negative self-relocation deltas from underflowing. However, that restriction is being applied after a trial pin of the batch in its current position. Thus we are not rejecting an invalid location if the batch has been used before, leading to an assertion if we happen to need to rearrange the entire payload. In the worst case, this may cause a GPU hang on gen7 or perhaps missing state. References: https://bugs.freedesktop.org/show_bug.cgi?id=105720 Fixes: 2889caa9 ("drm/i915: Eliminate lots of iterations over the execobjects array") Signed-off-by:
-
Ben Skeggs authored
Ctxdmas for cursors from all heads are setup in the core channel, and due to us tracking allocated handles per-window, we were failing with -EEXIST on multiple-head setups trying to allocate duplicate handles. The cursor code is hardcoded to use the core channel vram ctxdma already, so just skip ctxdma allocation for cursor fbs to fix the issue. Fixes: 5bca1621 ("drm/nouveau/kms/nv50-: move fb ctxdma tracking into windows") Reported-by:
Adam Borowski <kilobyte@angband.pl> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
- 18 Jun, 2018 1 commit
-
-
Paul Kocialkowski authored
This reverts commit 2c17a436. The offending commit triggers a run-time fault when accessing the panel element of the sun4i_tcon structure when no such panel is attached. It was apparently assumed in said commit that a panel is always used with the TCON. Although it is often the case, this is not always true. For instance a bridge might be used instead of a panel. This issue was discovered using an A13-OLinuXino, that uses the TCON in RGB mode for a simple DAC-based VGA bridge. Cc: stable@vger.kernel.org Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180613081647.31183-1-paul.kocialkowski@bootlin.com
-
- 17 Jun, 2018 1 commit
-
-
Stefan Agner authored
The statement always evaluates to true since the struct fields are arrays. This has shown up as a warning when compiling with clang: warning: address of array 'desc->layout.xstride' will always evaluate to 'true' [-Wpointer-bool-conversion] Check for values in the first plane instead. Fixes: 1a396789 ("drm: add Atmel HLCDC Display Controller support") Cc: <stable@vger.kernel.org> Signed-off-by:Boris Brezillon <boris.brezillon@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180617084826.31885-1-stefan@agner.ch
-
- 16 Jun, 2018 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A collection of fixes that should go into -rc1. This contains: - bsg_open vs bsg_unregister race fix (Anatoliy) - NVMe pull request from Christoph, with fixes for regressions in this window, FC connect/reconnect path code unification, and a trace point addition. - timeout fix (Christoph) - remove a few unused functions (Christoph) - blk-mq tag_set reinit fix (Roman)" * tag 'for-linus-20180616' of git://git.kernel.dk/linux-block: bsg: fix race of bsg_open and bsg_unregister block: remov blk_queue_invalidate_tags nvme-fabrics: fix and refine state checks in __nvmf_check_ready nvme-fabrics: handle the admin-only case properly in nvmf_check_ready nvme-fabrics: refactor queue ready check blk-mq: remove blk_mq_tagset_iter nvme: remove nvme_reinit_tagset nvme-fc: fix nulling of queue data on reconnect nvme-fc: remove reinit_request routine blk-mq: don't time out requests again that are in the timeout handler nvme-fc: change controllers first connect to use reconnect path nvme: don't rely on the changed namespace list log nvmet: free smart-log buffer after use nvme-rdma: fix error flow during mapping request data nvme: add bio remapping tracepoint nvme: fix NULL pointer dereference in nvme_init_subsystem blk-mq: reinit q->tag_set_list entry only after grace period
-
