- 17 Mar, 2015 40 commits
-
-
Matt Roper authored
With the switch to atomic plumbing for planes, some of our commit-time work (e.g., watermarks) is done after the new atomic state is swapped into the relevant DRM object, but before the DRM core has a chance to update its legacy state values. Switch intel_crtc_active() to look at the state objects rather than legacy fields to ensure we operate on the proper values. Note that we're continuing to use intel_crtc->active here for the time being since crtc->state isn't really hooked up yet. Once CRTC states are wired up properly, we'll want to switch this over to use crtc->state->active instead. v2: Switch back to intel_crtc->active for now; when Ander's work on CRTC states is ready, we can flip this over to use crtc->state->active instead. (Ville) Cc: Ander Conselvan De Oliveira <conselvan2@gmail.com> Suggested-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Damien Lespiau authored
Static analysis was complaining that a path existed where we could use stat[] uninitialized. Fix this by simplifying the logic to exit early if PSR isn't supported. Signed-off-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
-
Ville Syrjälä authored
The specs seem to be full of misinformation wrt. the Punit register 0x36. Some versions still show the old VLV bit layout, some the new layout, and all of them seem to tell us nonsense about the cdclk value encoding. Testing on actual hardware has shown that we simply need to program the desired CCK divider into the Punit register using the new layout of the bits. Doing that, the status bit change to indicate the same value, and the CCK 0x6b register also changes accordingly to indicate that CCK is now using the new divider. Signed-off-by:
Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com> Reviewed-by:
Yogesh Mohan Marimuthu <yogesh.mohan.marimuthu@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Supposedly CHV can sustain a pixel clock of up to 95% of cdclk, as opposed to the 90% limit that was used old older platforms. Update the cdclk selection code to allow for this. This will allow eg. HDMI 4k modes with their 297MHz pixel clock while still respecting the 320 MHz cdclk limit on CHV. Signed-off-by:
-
Jesse Barnes authored
So try to enumerate eDP unconditionally in those cases. Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Add wa tag Damien dug out.] Reviewed-by:
-
Damien Lespiau authored
I was dumping the DDI translation tables to make sure my patch updating the HDMI entry was doing the right thing when I noticed that the table was showing reset values after DPMS. And indeed, the DDI translation registers are in power well 1 on SKL, and so we're losing their values when shutting down eDP. Calling intel_prepare_ddi() on PW1 enabling re-programs the table. Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Damien Lespiau authored
We don't use this function on gen9, no need for that test here. Reviewed-by:
-
Damien Lespiau authored
The pipe interrupt registers are in the actual pipe power well, so we need to restore them when re-enable the corresponding power well. I've also copied what we do on HSW/BDW for VGA, even if the we haven't enabled unclaimed registers just yet. v2: Don't run skl_power_well_post_enable() if the power well is already enabled (Paulo) Signed-off-by: -
Damien Lespiau authored
Just to be more consistent with what we do on HSW. Signed-off-by:
-
Damien Lespiau authored
Just like what we do for HSW/BDW, having those variables makes it a bit easier to parse the code. Suggested-by:
-
Damien Lespiau authored
While we only need to restore pipe B/C interrupt registers on BDW when enabling the power well, skylake a bit more flexible and we'll also need to restore the pipe A registers as it has its own power well that can be toggled. Reviewed-by:
-
Jeff McGee authored
Collect the currently enabled counts of slice, subslice, and execution units using the power gate control ack message registers specific to Cherryview. Slice/subslice/EU info and hardware status can now be determined for CHV, so allow the debugfs SSEU status dump to proceed for CHV devices. Signed-off-by:
Jeff McGee <jeff.mcgee@intel.com> Reviewed-by:
-
Jeff McGee authored
Total EU was already being detected on CHV, so we just add the additional info parameters. The detection method is changed to be more robust in the case of subslice fusing - we don't want to trust the EU fuse bits corresponding to subslices which are fused-off. v2: Fixed subslice disable bitmasks and removed unnecessary ? operation (Ville) Signed-off-by: -
Ville Syrjälä authored
Poke at the CBR1_VLV register during init_clock_gating to make sure the PND deadline scheme is used. The hardware has two modes of operation wrt. watermarks: 1) PND deadline mode: - memory request deadline is calculated from actual FIFO level * DDL - WM1 watermark values are unused (AFAIK) - WM watermark level defines when to start fetching data from memory (assuming trickle feed is not used) 2) backup mode - deadline is based on FIFO status, DDL is unused - FIFO split into three regions with WM and WM1 watermarks, each part specifying a different FIFO status We want to use the PND deadline mode, so let's make sure the chicken bit is in the correct position on init. Also take the opportunity to refactor the shared code between VLV and CHV to a shared function. Reviewed-by:
-
Ville Syrjälä authored
VLV/CHV have similar DSPARB registers as older platforms, just more of them due to more planes. Add a bit of code to read out the current FIFO split from the registers. Will be useful later when we improve the WM calculations. v2: Add display_mmio_offset to DSPARB Reviewed-by:
-
Ville Syrjälä authored
Now that we have drm_planes for the cursor and primary we can move the pixel_size handling into vlv_compute_drain_latency() and just pass the appropriate plane to it. v2: Check plane->state->fb instead of plane->fb Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v1) Signed-off-by:
-
Ville Syrjälä authored
Introduce struct vlv_wm_values to house VLV watermark/drain latency values. We start by using it when computing the drain latency values. Reviewed-by:
-
Ville Syrjälä authored
Move the DDL precision handling into vlv_compute_drain_latency() so the callers don't have to duplicate the same code to deal with it. Reviewed-by:
-
Ville Syrjälä authored
The current drain lantency computation relies on hardcoded limits to determine when the to use the low vs. high precision multiplier. Rewrite the code to use a more straightforward approach. Reviewed-by:
-
Ville Syrjälä authored
Kill the silly DRAIN_LATENCY_PRECISION_* defines and just use the raw number instead. v2: Move the sprite 32/16 -> 16/8 preision multiplier change to another patch (Jesse) Reviewed-by: -
Ville Syrjälä authored
Apparently we must yet halve the DDL drain latency from what we're using currently. This little nugget is not in any spec, but came down through the grapevine. This makes the displays a bit more stable. Not quite fully stable but at least they don't fall over immediately on driver load. v2: Update high_precision in valleyview_update_sprite_wm() too (Jesse) Reviewed-by:
-
Chris Wilson authored
If we have a single unclaimed register, we will have lots. A WARN for each one makes the machine unusable and does not aid debugging. Convert the i915.mmio_debug option to a counter for how many WARNs to fire before shutting up. Even when i915.mmio_debug was disabled it would continue to shout an *ERROR* for every interrupt, without any information at all for debugging. The massive verbiage was added in commit 5978118c Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Wed Jul 16 17:49:29 2014 -0300 drm/i915: reorganize the unclaimed register detection code v2: Automatically enable invalid mmio reporting for the *next* invalid access if mmio_debug is disabled by default. This should give us clearer debug information without polluting the logs too much. v3: Compile fixes, rebase. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
kbuild test robot authored
drivers/gpu/drm/i915/intel_ringbuffer.c:435:1-4: WARNING: end returns can be simpified Simplify a trivial if-return sequence. Possibly combine with a preceding function call. Generated by: scripts/coccinelle/misc/simple_return.cocci CC: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Mika Kuoppala authored
commit 05a2fb15 ("drm/i915: Consolidate forcewake code") failed to take into account that we have used to reset both the gen6 style and the multithreaded style forcewake registers. This is due to fact that ivb can use either, depending on how the bios has set up the machine. Mimic the old semantics before we have determined the correct variety and reset both before the ecobus probe. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
-
John Harrison authored
Apparently, this has never worked reliably and is currently disabled. Also, the gains are not particularly impressive. Thus rather than try to keep unused code from decaying and having to update it for other driver changes, it was decided to simply remove it. For: VIZ-5115 Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Signed-off-by:
-
Matt Roper authored
We need to disable all sprite planes when disabling the CRTC. We had been using the top-level atomic 'disable' entrypoint to accomplish this, which was wrong. Not only can this lead to various locking issues, it also modifies the actual plane state, making it impossible to restore the plane properly later. For example, a DPMS off followed by a DPMS on will result in any sprite planes in use not being restored properly. The proper solution here is to call directly into our 'commit plane' hook with a copy of the plane's current state that has 'visible' set to false. Committing this dummy state will turn off the plane, but will not touch the actual plane->state pointer, allowing us to properly restore the plane state later. Signed-off-by:
-
Mika Kuoppala authored
If the requested size is less than what the full range of pdps can address, we end up setting pdps for only the requested area. The logical context however needs all pdp entries to be valid. Prior to commit 06fda602 ("drm/i915: Create page table allocators") we have been writing pdp entries with dma address of zero instead of valid pdps. This is supposedly bad even if those pdps are not addressed. As commit 06fda602 ("drm/i915: Create page table allocators") introduced more dynamic structure for pdps, we ended up oopsing when we populated the lrc context. Analyzing this oops revealed the fact that we have not been writing valid pdps with bsw, as it is doing the ppgtt init with 2GB limit in some cases. We should do the right thing and setup the non addressable part pdps/pde/pte to scratch page through the minimal structure by having just pdp with pde entries pointing to same page with pte entries pointing to scratch page. But instead of going through that trouble, setup all the pdps through individual pd pages and pt entries, even for non addressable parts. And let the clear range point them to scratch page. This way we populate the lrc with valid pdps and wait for dynamic page allocation work to land, and do the heavy lifting for truncating page table tree according to usage. The regression of oopsing in init was introduced by commit 06fda602 ("drm/i915: Create page table allocators") v2: Clear the range for the unused part also (Ville) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89350 Cc: Michel Thierry <michel.thierry@intel.com> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by:
Valtteri Rantala <valtteri.rantala@intel.com> Signed-off-by:
-
Sonika Jindal authored
v2: Making the link_clock half in switch inline with the DPLL_CTRL1_* macros (Ville) Signed-off-by:
Sonika Jindal <sonika.jindal@intel.com> Reviewed-by:
-
Sonika Jindal authored
eDp 1.4 supports custom frequencies. Skylake supports following intermediate frequencies : 3.24 GHz, 2.16 GHz and 4.32 GHz along with usual LBR, HBR and HBR2 frequencies. Read sink supported frequencies and get common frequencies from sink and source and use these for link training. v2: Rebased, removed calculation of min_clock since for edp it is taken as max_clock (as per comment). v3: Keeping single array for link rates (Satheesh) v4: Setting LINK_BW_SET to 0 when setting LINK_RATE_SET (Satheesh) v5: Some minor nits (Ville) v6: Keeping separate arrays for source and sink rates (Ville) v7: Remove redundant setting of DP_LINK_BW_SET to 0 (Ville) Reviewed-by:
-
Sonika Jindal authored
v2: Using DP_SUPPORTED_LINK_RATES macro for supported_rates array (Satheesh). v3: Reading dpcd's supported link rates tables based upon edp version in the same patch. v4: Move version check under is_edp (Satheesh) v5: Using le16 for rates, some naming, and removing nested if block (Ville) v6: Correctly using DP_MAX_SUPPORTED_RATES and removing DP_SUPPORTED_LINK_RATES (Ville) v7: Incorrectly removed DP_SUPPORTED_LINK_RATES in v6, re-adding it v8: Checking return value of intel_dp_dpcd_read_wake() (Ville) Reviewed-by:
-
Paulo Zanoni authored
Kill the blt/render tracking we currently have and use the frontbuffer tracking infrastructure. Don't enable things by default yet. v2: (Rodrigo) Fix small conflict on rebase and typo at subject. v3: (Paulo) Rebase on RENDER_CS change. v4: (Paulo) Rebase. v5: (Paulo) Simplify: flushes don't have origin (Daniel). Also rebase due to patch order changes. Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Ramalingam C authored
In invalidate and flush functions of eDP DRRS, if deferred downclock work starts execution at a time window between acquiring the drrs mutex and cancellation of the deferred work (intel_edp_drrs_downclock_work), then deferred work will find drrs mutex locked and wait for the same. Meanwhile the function that acquired mutex drrs invalidate/flush will wait for the completion of the deferred work before releasing the mutex. Thats a deadlock. To avoid such deadlock scenario, this change cancels the deferred work before acquiring the mutex at invalidate and flush functions. Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
-
Vandana Kannan authored
Adding a debugfs entry to determine if DRRS is supported or not V2: [By Ram]: Following details about the active crtc will be filled in seq-file of the debugfs 1. Encoder output type 2. DRRS Support on this CRTC 3. DRRS current state 4. Current Vrefresh Format is as follows: CRTC 1: Output: eDP, DRRS Supported: Yes (Seamless), DRRS_State: DRRS_HIGH_RR, Vrefresh: 60 CRTC 2: Output: HDMI, DRRS Supported : No, VBT DRRS_type: Seamless CRTC 1: Output: eDP, DRRS Supported: Yes (Seamless), DRRS_State: DRRS_LOW_RR, Vrefresh: 40 CRTC 2: Output: HDMI, DRRS Supported : No, VBT DRRS_type: Seamless V3: [By Ram]: Readability is improved. Another error case is covered [Daniel] V4: [By Ram]: Current status of the Idleness DRRS along with the Front buffer bits are added to the debugfs. [Rodrigo] V5: [By Ram]: Rephrased to make it easy to understand. And format is modified. [Rodrigo] V6: [By Ram]: Modeset mutex are acquired for each crtc along with renaming the Idleness detection states [Daniel] Signed-off-by:
Vandana Kannan <vandana.kannan@intel.com> Signed-off-by:
-
Neil Roberts authored
Adds a parameter which can be used with DRM_I915_GETPARAM to query the GPU revision. The intention is to use this in Mesa to implement the WaDisableSIMD16On3SrcInstr workaround on Skylake but only for revision 2. Signed-off-by:
Neil Roberts <neil@linux.intel.com> Signed-off-by:
-
Ander Conselvan de Oliveira authored
When logging that full mode switch is necessary, log which connector, encoder or crtc has caused it, so it is easier to figure out what is goind on by just looking at the log. Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by:
-
Ander Conselvan de Oliveira authored
We have similar macros for crtcs and encoders, and the pattern happens often enough to justify the macro. Signed-off-by:
-
Ander Conselvan de Oliveira authored
In the path were there is no state to duplicate, the allocated crtc state wouldn't have the crtc backpointer initialized. Signed-off-by:
-
Ville Syrjälä authored
The current minimum vco frequency leaves us with a gap in our supported frequencies at 233-243 MHz. Your typical 2560x1440@60 display wants a pixel clock of 241.5 MHz, which is just withing that gap. Reduce the allowed vco min frequency to 4.8GHz to reduce the gap to 233-240 MHz, and thus allow such displays to work. 4.8 GHz is actually the documented (at least in some docs) limit of the PLL, and we just picked 4.86 GHz originally because that was the lowest value produced by the PLL spreadsheet, which obviously didn't consider 2560x1440 displays. Signed-off-by:
-
Paulo Zanoni authored
We need this for FBC, and possibly for PSR too. v2: Don't only flush: invalidate too (Daniel). Signed-off-by:
-
Paulo Zanoni authored
We want to port FBC to the frontbuffer tracking infrastructure, but for that we need to know what caused the object invalidation so we can react accordingly: CPU mmaps need manual, GTT mmaps and flips don't need handling and ring rendering needs nukes. v2: - s/ORIGIN_RENDER/ORIGIN_CS/ (Daniel, Rodrigo) - Fix copy/pasted wrong documentation - Rebase v3: - Rebase v4: - Don't pass the operation to flushes (Daniel). Signed-off-by:
-
