- 20 Aug, 2009 40 commits
-
-
Lennert Buytenhek authored
Use MWL8K_TX_QUEUES instead of a hardcoded "4" in a couple of places. Signed-off-by:
Lennert Buytenhek <buytenh@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Lennert Buytenhek authored
Since firmware load commands don't generate 'command done' interrupts like normal commands do, polling for command done interrupts just unnecessarily slows down the firmware load process. Removing this bit of code speeds up loading a typical firmware image from 840 msec to 180 msec. Signed-off-by:
-
Lennert Buytenhek authored
Adding and removing the DMA header that the mwl8k hardware requires on tx and provides on rx can never fail, since we are guaranteed to have enough headroom on the tx path to expand the packet, and we only ever shrink the packet on the rx path. (And on both paths we are guaranteed to be the only user of the skb we are handling.) This allows removing all of the skb clone handling in the tx and tx reclaim paths, and eliminates error checks in both the tx and rx paths, simplifying the code a bit more. Signed-off-by:
-
Lennert Buytenhek authored
There is no need to check for NL80211_IFTYPE_MONITOR in ->add_interface(), as this function is never called for monitor interfaces. Also, there is no need to advertise this bit in our wiphy's ->interface_modes. Signed-off-by:
-
Lennert Buytenhek authored
mwl8k_configure_filter() passes pointers to total_flags and the multicast address list to a workqueue function, while there is no guarantee that those pointers will still be valid by the time the workqueue function runs. Solve this by passing total_flags by value, and by passing an already built multicast address setup command packet to the workqueue function so that we don't have to look at the multicast address list itself outside of mwl8k_configure_filter(). Also, since ->configure_filter() can sleep now, wait synchronously for the worker to finish. Signed-off-by:
-
Lennert Buytenhek authored
Signed-off-by:
-
Lennert Buytenhek authored
Signed-off-by:
-
Lennert Buytenhek authored
Signed-off-by:
-
Lennert Buytenhek authored
Instead of passing a flag bitmask to mwl8k_cmd_802_11_radio_control, pass the 'enable' and 'force' arguments as separate parameters, and introduce wrappers for the common cases of enabling and disabling without forcing. Signed-off-by:
-
Lennert Buytenhek authored
Signed-off-by:
-
Lennert Buytenhek authored
Signed-off-by:
-
Lennert Buytenhek authored
Signed-off-by:
-
Lennert Buytenhek authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Other than ns_avgbrssi (Average beacon rssi) no data of ath9k_node_stats is being used anywhere. Nuke this structure and move its only useful member to ar5416Anistate. Also cleanup this redundant data in ath_softc. Signed-off-by:
Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Currently the beacon rssi that LPF gives is divided and rounded up by ATH_RSSI_EP_MULTIPLIER twice. This will leave the incorrect rssi in ANI. Having correct rssi in ANI fixes the connection stability at < 30dB rssi range. This patch removes the unncessary computation of average rssi over already valid average rssi. Also removes the redundant macros to find average rssi. Signed-off-by:
-
gregor kowski authored
This add hardware tkip for b43. Signed-off-by:
Gregor Kowski <gregor.kowski@gmail.com> Acked-by:
Michael Buesch <mb@bu3sch.de> Signed-off-by:
-
Johannes Berg authored
"cfg80211: fix alignment problem in scan request" introduced a bug into the error path, because now we allocate the entire scan request and not just the channel list (the channel list is allocated together with the scan request) -- on errors we thus also need to free the entire scan request. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Gábor Stefanik authored
Larry has started re-checking all current routines against a new version of the Broadcom MIPS driver. This patch implements the first round of changes he documented on the specs wiki. Also remove a few FIXMEs regarding missing initial values for variables with dynamic initial values where reading the values has been implemented. Signed-off-by:
Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by:
-
Zhu Yi authored
In case of connection failure, the bssid info is not a must have. Signed-off-by:
Zhu Yi <yi.zhu@intel.com> Acked-by:
-
David Kilroy authored
Signed-off-by:
David Kilroy <kilroyd@googlemail.com> Signed-off-by:
-
David Kilroy authored
This only occurs in the following error situations: - driver calls connect_result with failure - error scheduling authentication on connect - error initiating scan (to get BSSID and channel) on connect - userspace calls disconnect while in the SCANNING or SCAN_AGAIN states Signed-off-by:
-
Christian Lamparter authored
Thanks to "mac80211: allow configure_filter callback to sleep", we no longer have to defer the work to the workqueue. Signed-off-by:
Christian Lamparter <chunkeey@web.de> Signed-off-by:
-
Gábor Stefanik authored
The specs are beginning to support rev3 LP-PHYs - implement one of the changes needed for rev3 support. Also, in the new MIPS driver, the "Japan TX filter" was renamed to "analog TX filter init" - however, calling it "init" is confusing, so name it "set analog filter", with a comment for easier future identification. Signed-off-by:
-
Ivo van Doorn authored
The bss_info_changed() callback function no longer needs to be atomic. Remove the scheduled work structure and call into the driver directly. Additionaly this makes the DRIVER_REQUIRE_SCHEDULED flag redundant so it can be removed. Signed-off-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Ivo van Doorn authored
The configure_filter() callback function no longer needs to be atomic. Remove the scheduled work structure and call into the driver configure_filter() directly. Signed-off-by:
-
Johannes Berg authored
My patch "cfg80211: fix deadlock" broke the code it was supposed to fix, the scan request checking. But it's not trivial to put it back the way it was, since the original patch had a deadlock. Now do it in a completely new way: queue the check off to a work struct, where we can freely lock. But that has some more complications, like needing to wait for it to be done before the wiphy/rdev can be destroyed, so some code is required to handle that. Signed-off-by:
-
Reinette Chatre authored
This fixes: CHECK drivers/net/wireless/ipw2x00/ipw2100.c drivers/net/wireless/ipw2x00/ipw2100.c:7888:22: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:188:12: originally declared here drivers/net/wireless/ipw2x00/ipw2100.c:7952:18: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:188:12: originally declared here drivers/net/wireless/ipw2x00/ipw2100.c:8000:18: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:188:12: originally declared here drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: originally declared here drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: originally declared here drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2100.c:8268:27: originally declared here CC [M] drivers/net/wireless/ipw2x00/ipw2100.o CHECK drivers/net/wireless/ipw2x00/ipw2200.c drivers/net/wireless/ipw2x00/ipw2200.c:847:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:891:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:935:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:980:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:1016:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:1051:13: warning: symbol 'led' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:92:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:1823:13: warning: symbol 'channel' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:86:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min1' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: warning: symbol '_min2' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:4268:19: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:6228:28: warning: symbol 'channel' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:86:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:6369:20: warning: symbol 'channel' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:86:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:6857:12: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:87:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:7964:13: warning: symbol 'channel' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:86:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:8720:12: warning: symbol 'channel' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:86:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:9662:13: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:87:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:9720:13: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:87:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:9826:13: warning: symbol 'mode' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:87:12: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:10318:21: warning: symbol 'remaining_bytes' shadows an earlier one drivers/net/wireless/ipw2x00/ipw2200.c:10184:13: originally declared here drivers/net/wireless/ipw2x00/ipw2200.c:8338:45: warning: cast to restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:4414:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/ipw2x00/ipw2200.c:4414:21: expected restricted __le16 [usertype] size drivers/net/wireless/ipw2x00/ipw2200.c:4414:21: got unsigned short [unsigned] [usertype] <noident> drivers/net/wireless/ipw2x00/ipw2200.c:6105:33: warning: incorrect type in initializer (different base types) drivers/net/wireless/ipw2x00/ipw2200.c:6105:33: expected restricted __le16 [usertype] tx_rates drivers/net/wireless/ipw2x00/ipw2200.c:6105:33: got unsigned short [unsigned] [usertype] rates_mask drivers/net/wireless/ipw2x00/ipw2200.c:6124:29: warning: bad assignment (>>=) to restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:6130:31: warning: restricted __le16 degrades to integer drivers/net/wireless/ipw2x00/ipw2200.c:6140:23: warning: restricted __le16 degrades to integer drivers/net/wireless/ipw2x00/ipw2200.c:6149:54: warning: restricted __le16 degrades to integer drivers/net/wireless/ipw2x00/ipw2200.c:6151:37: warning: invalid assignment: &= drivers/net/wireless/ipw2x00/ipw2200.c:6151:37: left side has type restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:6151:37: right side has type int drivers/net/wireless/ipw2x00/ipw2200.c:6154:54: warning: restricted __le16 degrades to integer drivers/net/wireless/ipw2x00/ipw2200.c:6156:37: warning: invalid assignment: &= drivers/net/wireless/ipw2x00/ipw2200.c:6156:37: left side has type restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:6156:37: right side has type int drivers/net/wireless/ipw2x00/ipw2200.c:6159:55: warning: restricted __le16 degrades to integer drivers/net/wireless/ipw2x00/ipw2200.c:6161:37: warning: invalid assignment: &= drivers/net/wireless/ipw2x00/ipw2200.c:6161:37: left side has type restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:6161:37: right side has type int drivers/net/wireless/ipw2x00/ipw2200.c:6164:29: warning: invalid assignment: |= drivers/net/wireless/ipw2x00/ipw2200.c:6164:29: left side has type restricted __le16 drivers/net/wireless/ipw2x00/ipw2200.c:6164:29: right side has type unsigned short drivers/net/wireless/ipw2x00/ipw2200.c:7853:29: warning: incorrect type in assignment (different base types) drivers/net/wireless/ipw2x00/ipw2200.c:7853:29: expected signed char [signed] [usertype] [explicitly-signed] rt_dbmnoise drivers/net/wireless/ipw2x00/ipw2200.c:7853:29: got restricted __le16 [usertype] noise drivers/net/wireless/ipw2x00/ipw2200.c:7967:25: warning: incorrect type in initializer (different base types) drivers/net/wireless/ipw2x00/ipw2200.c:7967:25: expected signed char [signed] [usertype] [explicitly-signed] noise drivers/net/wireless/ipw2x00/ipw2200.c:7967:25: got restricted __le16 [usertype] noise Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Cc: Zhu Yi <yi.zhu@intel.com> Acked-by:
-
Daniel Walker authored
This expands on the current fwded_frames stat counter which should be equal to the total of these two new counters. The new counters are called "fwded_mcast" and "fwded_unicast". Signed-off-by:
Daniel Walker <dwalker@fifo99.com> Signed-off-by:
Javier Cardona <javier@cozybit.com> Signed-off-by:
-
John W. Linville authored
CC [M] drivers/net/wireless/wl12xx/wl1271_main.o drivers/net/wireless/wl12xx/wl1271_main.c: In function ‘wl1271_op_add_interface’: drivers/net/wireless/wl12xx/wl1271_main.c:611: warning: ‘print_mac’ is deprecated (declared at include/linux/if_ether.h:142) Signed-off-by: -
John W. Linville authored
CC [M] net/mac80211/rc80211_pid_algo.o net/mac80211/rc80211_pid_algo.c: In function ‘rate_control_pid_rate_init’: net/mac80211/rc80211_pid_algo.c:304: warning: unused variable ‘si’ Signed-off-by: -
Luis R. Rodriguez authored
This moves the shared regulatory structure into the common structure. We will use this ongoing for common data. Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
-
Sujith authored
In ath9k_stop(), tx_complete_work was being cancelled twice. This patch fixes it. Also, locking sc->mutex should be done at the beginning. Signed-off-by:
Sujith <Sujith.Manoharan@atheros.com> Signed-off-by:
-
Bob Copeland authored
After initial power-up, the embedded cpu is usually halted. However, if we down the interface and only do a soft reset before bringing the interface back up, it will still be running and the firmware loading code will bail out. This change halts the CPU before loading the firmware, enabling a second call to wl1251_boot() to succeed without a hard reset. Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Javier Cardona authored
Mesh uses the tx failure average to compute the (m)path metric. This used to be done inside the rate control module. This patch breaks the dependency between the mesh stack and the rate control algorithm. Mesh will now work independently of the chosen rate control algorithm. The mesh stack keeps a moving average of the average transmission losses for each mesh peer station. If the fail average exceeds a certain threshold, the peer link is marked as broken. Signed-off-by:
-
Benoit PAPILLAULT authored
rt2800pci can handle different retry rates, it will always step 1 rate down after a failed transmission so creating the retry rate list for mac80211 is quite simple. Signed-off-by:
Benoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by:
-
Ivo van Doorn authored
According to the original Ralink driver, LG_FBK_CFG0_OFDMMCS2FBK should be initialized to 9 rather then 3. Based on a patch for rt2800pci from Benoit Signed-off-by:
-
Ivo van Doorn authored
In the TX descriptor the Packet ID must not be 0, so add 1 to the ID. The wireless CLI ID is not allowed to be 0 either, but also must be initialized with the wcid value rather then keyid. Based on a patch for rt2800pci from Benoit Signed-off-by:
-
Ivo van Doorn authored
When the RX descriptor indicates the frame was L2 padded, the SKBDESC_L2_PADDED flag should be set to make sure the L2 padding is removed before it is send to mac80211. Signed-off-by:
-
Ivo van Doorn authored
Add new defines for RF chipsets which can be found by the driver. We don't have to check for these chips specifically yet, but it is better to have the defines in now. Signed-off-by:
-
Ivo van Doorn authored
Fixed comments about SHARED_KEY_TABLE_BASE and SHARED_KEY_MODE_BASE. Fixed initialization loop for SHARED_KEY_MODE_ENTRY. Based on a patch for rt2800pci from Benoit. Signed-off-by:
-
