dma_declare_coherent_memory() and friends are designed to account
difference in CPU and device addresses. However, when it is used with
reserved memory regions there is assumption that CPU and device have
the same view on address space. This assumption gets invalid when
reserved memory for coherent DMA allocations is referenced by device
with non-empty "dma-range" property.

Simply feeding device address as rmem->base + dev->dma_pfn_offset
would not work due to reserved memory region can be shared, so this
patch turns device address to be expressed with help of CPU address
and device's dma_pfn_offset in case memory reservation has been done
via device tree; non device tree users continue to use the old scheme.

Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Roger Quadros <rogerq@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Andras Szemzo <sza@esh.hu>
Tested-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Even though dma-noop-ops assumes 1:1 memory mapping DMA memory range
can be different to RAM. For example, ARM STM32F4 MCU offers the
possibility to remap SDRAM from 0xc000_0000 to 0x0 to get CPU
performance boost, but DMA continue to see SDRAM at 0xc000_0000. This
difference in mapping is handled via device-tree "dma-range" property
which leads to dev->dma_pfn_offset is set nonzero. To handle such
cases take dma_pfn_offset into account.

Cc: Joerg Roedel <jroedel@suse.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Reported-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Andras Szemzo <sza@esh.hu>
Tested-by: Alexandre TORGUE <alexandre.torgue@st.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

dmam_alloc_noncoherent is a trivial wrapper around dmam_alloc_attrs,
that hardcodes one particular flag.  Make the devres code more
flexible by allowing the callers to pass arbitrary flags.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>

This function was never used since it was added.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>

After commit 9e442aa6a753 ("x86: remove DMA_ERROR_CODE"), the inlining
decisions in the qat driver changed slightly, introducing a new false-positive
warning:

drivers/crypto/qat/qat_common/qat_algs.c: In function 'qat_alg_sgl_to_bufl.isra.6':
include/linux/dma-mapping.h:228:2: error: 'sz_out' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/crypto/qat/qat_common/qat_algs.c:676:9: note: 'sz_out' was declared here

The patch that introduced this is correct, so let's just avoid the
warning in this driver by rearranging the unwinding after an error
to make it more obvious to the compiler what is going on.

The problem here is the 'if (unlikely(dma_mapping_error(dev, blp)))'
check, in which the 'unlikely' causes gcc to forget what it knew about
the state of the variables. Cleaning up the dma state in the reverse
order it was created means we can simplify the logic so it doesn't have
to know about that state, and also makes it easier to understand.

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

au1100fb is using managed dma allocations, so it doesn't need to
explicitly free the dma memory in the error path (and if it did
it would have to use the managed version).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

This code has been spread between getting in through arch trees, the iommu
tree, -mm and the drivers tree.  There will be a lot of work in this area,
including consolidating various arch implementations into more common
code, so ensure we have a proper git tree that facilitates cooperation with
the architecture maintainers.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Signed-off-by: Christoph Hellwig <hch@lst.de>

Signed-off-by: Christoph Hellwig <hch@lst.de>

Besides removing the last instance of the set_dma_mask method this also
reduced the code duplication.
Signed-off-by: Christoph Hellwig <hch@lst.de>

By the time cell_pci_dma_dev_setup calls cell_dma_dev_setup no device can
have the fixed map_ops set yet as it's only set by the set_dma_mask
method.  So move the setup for the fixed case to be only called in that
place instead of indirecting through cell_dma_dev_setup.
Signed-off-by: Christoph Hellwig <hch@lst.de>

These just duplicate the default behavior if no method is provided.
Signed-off-by: Christoph Hellwig <hch@lst.de>

This just duplicates the generic implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Same behavior, less code duplication.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Same behavior, less code duplication.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Signed-off-by: Christoph Hellwig <hch@lst.de>

And instead wire it up as method for all the dma_map_ops instances.

Note that this also means the arch specific check will be fully instead
of partially applied in the AMD iommu driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>

And instead wire it up as method for all the dma_map_ops instances.

Note that the code seems a little fishy for dmabounce and iommu, but
for now I'd like to preserve the existing behavior 1:1.
Signed-off-by: Christoph Hellwig <hch@lst.de>

This implementation is simply bogus - openrisc only has a simple
direct mapped DMA implementation and thus doesn't care about the
address.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Signed-off-by: Christoph Hellwig <hch@lst.de>

This implementation is simply bogus - hexagon only has a simple
direct mapped DMA implementation and thus doesn't care about the
address.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Richard Kuo <rkuo@codeaurora.org>

These just duplicate the default behavior if no method is provided.
Signed-off-by: Christoph Hellwig <hch@lst.de>

These just duplicate the default behavior if no method is provided.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Usually dma_supported decisions are done by the dma_map_ops instance.
Switch sparc to that model by providing a ->dma_supported instance for
sbus that always returns false, and implementations tailored to the sun4u
and sun4v cases for sparc64, and leave it unimplemented for PCI on
sparc32, which means always supported.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David S. Miller <davem@davemloft.net>

We can just use pci32_dma_ops directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David S. Miller <davem@davemloft.net>

And update the documentation - dma_mapping_error has been supported
everywhere for a long time.
Signed-off-by: Christoph Hellwig <hch@lst.de>

DMA_ERROR_CODE is going to go away, so don't rely on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>

All dma_map_ops instances now handle their errors through
->mapping_error.
Signed-off-by: Christoph Hellwig <hch@lst.de>

DMA_ERROR_CODE is going to go away, so don't rely on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>

DMA_ERROR_CODE is going to go away, so don't rely on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>

DMA_ERROR_CODE is going to go away, so don't rely on it.  Instead
define a ->mapping_error method for all IOMMU based dma operation
instances.  The direct ops don't ever return an error and don't
need a ->mapping_error method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>

DMA_ERROR_CODE is going to go away, so don't rely on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David S. Miller <davem@davemloft.net>

s390 can also use noop_dma_ops, and while that currently does not return
errors it will so in the future.  Implementing the mapping_error method
is the proper way to have per-ops error conditions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>

DMA_ERROR_CODE is going to go away, so don't rely on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Richard Kuo <rkuo@codeaurora.org>

The dma alloc interface returns an error by return NULL, and the
mapping interfaces rely on the mapping_error method, which the dummy
ops already implement correctly.

Thus remove the DMA_ERROR_CODE define.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>

xtensa already implements the mapping_error method for its only
dma_map_ops instance.
Signed-off-by: Christoph Hellwig <hch@lst.de>

sh does not return errors for dma_map_page.
Signed-off-by: Christoph Hellwig <hch@lst.de>

openrisc does not return errors for dma_map_page.
Signed-off-by: Christoph Hellwig <hch@lst.de>

microblaze does not return errors for dma_map_page.
Signed-off-by: Christoph Hellwig <hch@lst.de>