Julian Anastasov says:

====================
ipv4: fib_select_default changes

This patchset contains 2 changes for the alternative routes,
one to add tb_id/fa_slen check needed after the recent
fib_trie optimizations for fib aliases and the second
change attempts to support alternative routes with TOS
requirement.

	Sorry that I don't have access to the original
report from Hagen Paul Pfeifer. I hope he will see this
change.

	The second change adds fa_default field to the
fib aliases (which can be many) and if the feature to
filter the alternative routes by TOS is not worth it,
this second patch can be scrapped.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

fib_select_default considers alternative routes only when
res->fi is for the first alias in res->fa_head. In the
common case this can happen only when the initial lookup
matches the first alias with highest TOS value. This
prevents the alternative routes to require specific TOS.

This patch solves the problem as follows:

- routes that require specific TOS should be returned by
fib_select_default only when TOS matches, as already done
in fib_table_lookup. This rule implies that depending on the
TOS we can have many different lists of alternative gateways
and we have to keep the last used gateway (fa_default) in first
alias for the TOS instead of using single tb_default value.

- as the aliases are ordered by many keys (TOS desc,
fib_priority asc), we restrict the possible results to
routes with matching TOS and lowest metric (fib_priority)
and routes that match any TOS, again with lowest metric.

For example, packet with TOS 8 can not use gw3 (not lowest
metric), gw4 (different TOS) and gw6 (not lowest metric),
all other gateways can be used:

tos 8 via gw1 metric 2 <--- res->fa_head and res->fi
tos 8 via gw2 metric 2
tos 8 via gw3 metric 3
tos 4 via gw4
tos 0 via gw5
tos 0 via gw6 metric 1
Reported-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

fib_trie starting from 4.1 can link fib aliases from
different prefixes in same list. Make sure the alternative
gateways are in same table and for same prefix (0) by
checking tb_id and fa_slen.

Fixes: 79e5ad2c ("fib_trie: Remove leaf_info")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Don't use shared bluetooth antenna in iwlwifi driver for management
    frames, from Emmanuel Grumbach.

 2) Fix device ID check in ath9k driver, from Felix Fietkau.

 3) Off by one in xen-netback BUG checks, from Dan Carpenter.

 4) Fix IFLA_VF_PORT netlink attribute validation, from Daniel Borkmann.

 5) Fix races in setting peeked bit flag in SKBs during datagram
    receive.  If it's shared we have to clone it otherwise the value can
    easily be corrupted.  Fix from Herbert Xu.

 6) Revert fec clock handling change, causes regressions.  From Fabio
    Estevam.

 7) Fix use after free in fq_codel and sfq packet schedulers, from WANG
    Cong.

 8) ipvlan bug fixes (memory leaks, missing rcu_dereference_bh, etc.)
    from WANG Cong and Konstantin Khlebnikov.

 9) Memory leak in act_bpf packet action, from Alexei Starovoitov.

10) ARM bpf JIT bug fixes from Nicolas Schichan.

11) Fix backwards compat of ANY_LAYOUT in virtio_net driver, from
    Michael S Tsirkin.

12) Destruction of bond with different ARP header types not handled
    correctly, fix from Nikolay Aleksandrov.

13) Revert GRO receive support in ipv6 SIT tunnel driver, causes
    regressions because the GRO packets created cannot be processed
    properly on the GSO side if we forward the frame.  From Herbert Xu.

14) TCCR update race and other fixes to ravb driver from Sergei
    Shtylyov.

15) Fix SKB leaks in caif_queue_rcv_skb(), from Eric Dumazet.

16) Fix panics on packet scheduler filter replace, from Daniel Borkmann.

17) Make sure AF_PACKET sees properly IP headers in defragmented frames
    (via PACKET_FANOUT_FLAG_DEFRAG option), from Edward Hyunkoo Jee.

18) AF_NETLINK cannot hold mutex in RCU callback, fix from Florian
    Westphal.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (84 commits)
  ravb: fix ring memory allocation
  net: phy: dp83867: Fix warning check for setting the internal delay
  openvswitch: allocate nr_node_ids flow_stats instead of num_possible_nodes
  netlink: don't hold mutex in rcu callback when releasing mmapd ring
  ARM: net: fix vlan access instructions in ARM JIT.
  ARM: net: handle negative offsets in BPF JIT.
  ARM: net: fix condition for load_order > 0 when translating load instructions.
  tcp: suppress a division by zero warning
  drivers: net: cpsw: remove tx event processing in rx napi poll
  inet: frags: fix defragmented packet's IP header for af_packet
  net: mvneta: fix refilling for Rx DMA buffers
  stmmac: fix setting of driver data in stmmac_dvr_probe
  sched: cls_flow: fix panic on filter replace
  sched: cls_flower: fix panic on filter replace
  sched: cls_bpf: fix panic on filter replace
  net/mdio: fix mdio_bus_match for c45 PHY
  net: ratelimit warnings about dst entry refcount underflow or overflow
  caif: fix leaks and race in caif_queue_rcv_skb()
  qmi_wwan: add the second QMI/network interface for Sierra Wireless MC7305/MC7355
  ravb: fix race updating TCCR
  ...

Pull ARM64 fixes from Catalin Marinas:

 - arm64 build fix following the move of the thread_struct to the end of
   task_struct and the asm offsets becoming too large for the AArch64
   ISA

 - preparatory patch for moving irq_data struct members (applied now to
   reduce dependency for the next merging window)

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  ARM64/irq: Use access helper irq_data_get_affinity_mask()
  arm64: switch_to: calculate cpu context pointer using separate register

This is a preparatory patch for moving irq_data struct members.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Commit 0c8c0f03 ("x86/fpu, sched: Dynamically allocate 'struct fpu'")
moved the thread_struct to the bottom of task_struct. As a result, the
offset is now too large to be used in an immediate add on arm64 with
some kernel configs:

arch/arm64/kernel/entry.S: Assembler messages:
arch/arm64/kernel/entry.S:588: Error: immediate out of range
arch/arm64/kernel/entry.S:597: Error: immediate out of range

This patch calculates the offset using an additional register instead of
an immediate offset.

Fixes: 0c8c0f03 ("x86/fpu, sched: Dynamically allocate 'struct fpu'")
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The driver is written as if it can adapt to a low memory situation  allocating
less RX  skbs and TX aligned buffers than the respective RX/TX ring sizes.  In
reality  though  the driver  would malfunction in this case. Stop being overly
smart and just fail in such situation -- this is achieved by moving the memory
allocation from ravb_ring_format() to ravb_ring_init().

We leave dma_map_single() calls in place but make their failure non-fatal
by marking the corresponding RX descriptors  with zero data size which should
prevent DMA to an invalid addresses.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix warning: logical ‘or’ of collectively exhaustive tests is always true

Change the internal delay check from an 'or' condition to an 'and'
condition.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some architectures like POWER can have a NUMA node_possible_map that
contains sparse entries. This causes memory corruption with openvswitch
since it allocates flow_cache with a multiple of num_possible_nodes() and
assumes the node variable returned by for_each_node will index into
flow->stats[node].

Use nr_node_ids to allocate a maximal sparse array instead of
num_possible_nodes().

The crash was noticed after 3af229f2 was applied as it changed the
node_possible_map to match node_online_map on boot.
Fixes: 3af229f2Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kirill A. Shutemov says:

This simple test-case trigers few locking asserts in kernel:

int main(int argc, char **argv)
{
        unsigned int block_size = 16 * 4096;
        struct nl_mmap_req req = {
                .nm_block_size          = block_size,
                .nm_block_nr            = 64,
                .nm_frame_size          = 16384,
                .nm_frame_nr            = 64 * block_size / 16384,
        };
        unsigned int ring_size;
	int fd;

	fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_GENERIC);
        if (setsockopt(fd, SOL_NETLINK, NETLINK_RX_RING, &req, sizeof(req)) < 0)
                exit(1);
        if (setsockopt(fd, SOL_NETLINK, NETLINK_TX_RING, &req, sizeof(req)) < 0)
                exit(1);

	ring_size = req.nm_block_nr * req.nm_block_size;
	mmap(NULL, 2 * ring_size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
	return 0;
}

+++ exited with 0 +++
BUG: sleeping function called from invalid context at /home/kas/git/public/linux-mm/kernel/locking/mutex.c:616
in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: init
3 locks held by init/1:
 #0:  (reboot_mutex){+.+...}, at: [<ffffffff81080959>] SyS_reboot+0xa9/0x220
 #1:  ((reboot_notifier_list).rwsem){.+.+..}, at: [<ffffffff8107f379>] __blocking_notifier_call_chain+0x39/0x70
 #2:  (rcu_callback){......}, at: [<ffffffff810d32e0>] rcu_do_batch.isra.49+0x160/0x10c0
Preemption disabled at:[<ffffffff8145365f>] __delay+0xf/0x20

CPU: 1 PID: 1 Comm: init Not tainted 4.1.0-00009-gbddf4c4818e0 #253
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Debian-1.8.2-1 04/01/2014
 ffff88017b3d8000 ffff88027bc03c38 ffffffff81929ceb 0000000000000102
 0000000000000000 ffff88027bc03c68 ffffffff81085a9d 0000000000000002
 ffffffff81ca2a20 0000000000000268 0000000000000000 ffff88027bc03c98
Call Trace:
 <IRQ>  [<ffffffff81929ceb>] dump_stack+0x4f/0x7b
 [<ffffffff81085a9d>] ___might_sleep+0x16d/0x270
 [<ffffffff81085bed>] __might_sleep+0x4d/0x90
 [<ffffffff8192e96f>] mutex_lock_nested+0x2f/0x430
 [<ffffffff81932fed>] ? _raw_spin_unlock_irqrestore+0x5d/0x80
 [<ffffffff81464143>] ? __this_cpu_preempt_check+0x13/0x20
 [<ffffffff8182fc3d>] netlink_set_ring+0x1ed/0x350
 [<ffffffff8182e000>] ? netlink_undo_bind+0x70/0x70
 [<ffffffff8182fe20>] netlink_sock_destruct+0x80/0x150
 [<ffffffff817e484d>] __sk_free+0x1d/0x160
 [<ffffffff817e49a9>] sk_free+0x19/0x20
[..]

Cong Wang says:

We can't hold mutex lock in a rcu callback, [..]

Thomas Graf says:

The socket should be dead at this point. It might be simpler to
add a netlink_release_ring() function which doesn't require
locking at all.
Reported-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Diagnosed-by: Cong Wang <cwang@twopensource.com>
Suggested-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nicolas Schichan says:

====================
BPF JIT fixes for ARM

These patches are fixing bugs in the ARM JIT and should probably find
their way to a stable kernel. All 60 test_bpf tests in Linux 4.1 release
are now passing OK (was 54 out of 60 before).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This makes BPF_ANC | SKF_AD_VLAN_TAG and BPF_ANC | SKF_AD_VLAN_TAG_PRESENT
have the same behaviour as the in kernel VM and makes the test_bpf LD_VLAN_TAG
and LD_VLAN_TAG_PRESENT tests pass.
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously, the JIT would reject negative offsets known during code
generation and mishandle negative offsets provided at runtime.

Fix that by calling bpf_internal_load_pointer_neg_helper()
appropriately in the jit_get_skb_{b,h,w} slow path helpers and by forcing
the execution flow to the slow path helpers when the offset is
negative.
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

To check whether the load should take the fast path or not, the code
would check that (r_skb_hlen - load_order) is greater than the offset
of the access using an "Unsigned higher or same" condition. For
halfword accesses and an skb length of 1 at offset 0, that test is
valid, as we end up comparing 0xffffffff(-1) and 0, so the fast path
is taken and the filter allows the load to wrongly succeed. A similar
issue exists for word loads at offset 0 and an skb length of less than
4.

Fix that by using the condition "Signed greater than or equal"
condition for the fast path code for load orders greater than 0.
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrew Morton reported following warning on one ARM build
with gcc-4.4 :

net/ipv4/inet_hashtables.c: In function 'inet_ehash_locks_alloc':
net/ipv4/inet_hashtables.c:617: warning: division by zero

Even guarded with a test on sizeof(spinlock_t), compiler does not
like current construct on a !CONFIG_SMP build.

Remove the warning by using a temporary variable.

Fixes: 095dc8e0 ("tcp: fix/cleanup inet_ehash_locks_alloc()")
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit a2673b6e.

Kinglong Mee reports a memory leak with that patch, and Jan Kara confirms:

 "Thanks for report! You are right that my patch introduces a race
  between fsnotify kthread and fsnotify_destroy_group() which can result
  in leaking inotify event on group destruction.

  I haven't yet decided whether the right fix is not to queue events for
  dying notification group (as that is pointless anyway) or whether we
  should just fix the original problem differently...  Whenever I look
  at fsnotify code mark handling I get lost in the maze of locks, lists,
  and subtle differences between how different notification systems
  handle notification marks :( I'll think about it over night"

and after thinking about it, Jan says:

 "OK, I have looked into the code some more and I found another
  relatively simple way of fixing the original oops.  It will be IMHO
  better than trying to fixup this issue which has more potential for
  breakage.  I'll ask Linus to revert the fsnotify fix he already merged
  and send a new fix"
Reported-by: Kinglong Mee <kinglongmee@gmail.com>
Requested-by: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'wireless-drivers-for-davem-2015-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
ath9k:

* fix device ID check for AR956x

iwlwifi:

* bug fixes specific for 8000 series
* fix a crash in time events
* fix a crash in PCIe transport
* fix BT Coex code that prevented association on certain
  devices (3160).
* revert the new RBD allocation model because it introduced
  a bug when running on weak VM setups.
* new device IDs
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull pin control fixes from Linus Walleij:
 "Here are some overly ripe pin control fixes for the v4.2 series.

  They got delayed because of various crap commits and having to clean
  and rinse the patch stack a few times.  Now they are however looking
  good.

   - some dead defines dropped from the Samsung driver, was targeted for
     -rc2 but got delayed
   - drop the strict mode from abx500, this was too strict
   - fix the R-Car sparse IRQs code to work as intended
   - fix the IRQ code for the pinctrl-single GPIO backend to not enforce
     threaded IRQs
   - clear the latched events/IRQs for the Broadcom BCM2835 driver
   - fix up debugfs for the Freescale imx1 driver
   - fix a typo bug in the Schmitt Trigger setup in the LPC18xx driver"

* tag 'pinctrl-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: lpc18xx: fix schmitt trigger setup
  Subject: pinctrl: imx1-core: Fix debug output in .pin_config_set callback
  pinctrl: bcm2835: Clear the event latch register when disabling interrupts
  pinctrl: single: ensure pcs irq will not be forced threaded
  sh-pfc: fix sparse GPIOs for R-Car SoCs
  pinctrl: abx500: remove strict mode
  pinctrl: samsung: Remove old unused defines

Pull UDF fix from Jan Kara:
 "A fix for UDF corruption when certain disk-format feature is enabled"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Don't corrupt unalloc spacetable when writing it

Merge tag 'trace-v4.2-rc2-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing sample code fix from Steven Rostedt:
 "He Kuang noticed that the sample code using the trace_event helper
  function __get_dynamic_array_len() is broken.

  This only changes the sample code, and I'm pushing this now instead of
  later because I don't want others using the broken code as an example
  when using it for real"

* tag 'trace-v4.2-rc2-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix sample output of dynamic arrays

With commit c03abd84 ("net: ethernet: cpsw: don't requests IRQs
we don't use") common isr and napi are separated into separate tx isr
and rx isr/napi, but still in rx napi tx events are handled. So removing
the tx event handling in rx napi.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When ip_frag_queue() computes positions, it assumes that the passed
sk_buff does not contain L2 headers.

However, when PACKET_FANOUT_FLAG_DEFRAG is used, IP reassembly
functions can be called on outgoing packets that contain L2 headers.

Also, IPv4 checksum is not corrected after reassembly.

Fixes: 7736d33f ("packet: Add pre-defragmentation support for ipv4 fanouts.")
Signed-off-by: Edward Hyunkoo Jee <edjee@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jerry Chu <hkchu@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With the actual code, if a memory allocation error happens while
refilling a Rx descriptor, then the original Rx buffer is both passed
to the networking stack (in a SKB) and let in the Rx ring. This leads
to various kernel oops and crashes.

As a fix, this patch moves Rx descriptor refilling ahead of building
SKB with the associated Rx buffer. In case of a memory allocation
failure, data is dropped and the original DMA buffer is put back into
the Rx ring.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit")
Cc: <stable@vger.kernel.org> # v3.8+
Tested-by: Yoann Sculo <yoann@sculo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 803f8fc4 ("stmmac: move driver data setting into
stmmac_dvr_probe") mistakenly set priv and not priv->dev as
driver data. This meant that the remove, resume and suspend
callbacks that fetched and tried to use this data would most
likely explode. Fix the issue by using the correct variable.

Fixes: 803f8fc4 ("stmmac: move driver data setting into stmmac_dvr_probe")
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
Couple of classifier fixes

This fixes a couple of panics in the form of (analogous for
cls_flow{,er}):

[  912.759276] BUG: unable to handle kernel NULL pointer dereference at (null)
[  912.759373] IP: [<ffffffffa09d4d6d>] cls_bpf_change+0x23d/0x268 [cls_bpf]
[  912.759441] PGD 8783c067 PUD 5f684067 PMD 0
[  912.759491] Oops: 0002 [#1] SMP DEBUG_PAGEALLOC
[  912.759543] Modules linked in: cls_bpf(E) act_gact [...]
[  912.772734] CPU: 3 PID: 10489 Comm: tc Tainted: G        W   E   4.2.0-rc2+ #73
[  912.775004] Hardware name: Apple Inc. MacBookAir5,1/Mac-66F35F19FE2A0D05, BIOS MBA51.88Z.00EF.B02.1211271028 11/27/2012
[  912.777327] task: ffff88025eaa8000 ti: ffff88005f734000 task.ti: ffff88005f734000
[  912.779662] RIP: 0010:[<ffffffffa09d4d6d>]  [<ffffffffa09d4d6d>] cls_bpf_change+0x23d/0x268 [cls_bpf]
[  912.781991] RSP: 0018:ffff88005f7379c8  EFLAGS: 00010286
[  912.784183] RAX: ffff880201d64e48 RBX: 0000000000000000 RCX: ffff880201d64e40
[  912.786402] RDX: 0000000000000000 RSI: ffffffffa09d51c0 RDI: ffffffffa09d51a6
[  912.788625] RBP: ffff88005f737a68 R08: 0000000000000000 R09: 0000000000000000
[  912.790854] R10: 0000000000000001 R11: 0000000000000001 R12: ffff880078ab5a80
[  912.793082] R13: ffff880232b31570 R14: ffff88005f737ae0 R15: ffff8801e215d1d0
[  912.795181] FS:  00007f3c0c80d740(0000) GS:ffff880265400000(0000) knlGS:0000000000000000
[  912.797281] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  912.799402] CR2: 0000000000000000 CR3: 000000005460f000 CR4: 00000000001407e0
[  912.799403] Stack:
[  912.799407]  ffffffff00000000 ffff88023ea18000 000000005f737a08 0000000000000000
[  912.799415]  ffffffff81f06140 ffff880201d64e40 0000000000000000 ffff88023ea1804c
[  912.799418]  0000000000000000 ffff88023ea18044 ffff88023ea18030 ffff88023ea18038
[  912.799418] Call Trace:
[  912.799437]  [<ffffffff816d5685>] tc_ctl_tfilter+0x335/0x910
[  912.799443]  [<ffffffff813622a8>] ? security_capable+0x48/0x60
[  912.799448]  [<ffffffff816b90e5>] rtnetlink_rcv_msg+0x95/0x240
[  912.799454]  [<ffffffff810f612d>] ? trace_hardirqs_on+0xd/0x10
[  912.799456]  [<ffffffff816b902f>] ? rtnetlink_rcv+0x1f/0x40
[  912.799459]  [<ffffffff816b902f>] ? rtnetlink_rcv+0x1f/0x40
[  912.799461]  [<ffffffff816b9050>] ? rtnetlink_rcv+0x40/0x40
[  912.799464]  [<ffffffff816df38f>] netlink_rcv_skb+0xaf/0xc0
[  912.799467]  [<ffffffff816b903e>] rtnetlink_rcv+0x2e/0x40
[  912.799469]  [<ffffffff816deaef>] netlink_unicast+0xef/0x1b0
[  912.799471]  [<ffffffff816defa0>] netlink_sendmsg+0x3f0/0x620
[  912.799476]  [<ffffffff81687028>] sock_sendmsg+0x38/0x50
[  912.799479]  [<ffffffff81687938>] ___sys_sendmsg+0x288/0x290
[  912.799482]  [<ffffffff810f7852>] ? __lock_acquire+0x572/0x2050
[  912.799488]  [<ffffffff810265db>] ? native_sched_clock+0x2b/0x90
[  912.799493]  [<ffffffff8116135f>] ? __audit_syscall_entry+0xaf/0x100
[  912.799497]  [<ffffffff8116135f>] ? __audit_syscall_entry+0xaf/0x100
[  912.799501]  [<ffffffff8112aa19>] ? current_kernel_time+0x69/0xd0
[  912.799505]  [<ffffffff81266f16>] ? __fget_light+0x66/0x90
[  912.799508]  [<ffffffff81688812>] __sys_sendmsg+0x42/0x80
[  912.799510]  [<ffffffff81688862>] SyS_sendmsg+0x12/0x20
[  912.799515]  [<ffffffff817f9a6e>] entry_SYSCALL_64_fastpath+0x12/0x76
[  912.799540] Code: 4d 88 49 8b 57 08 48 89 51 08 49 8b 57 10 48 89 c8 48 83 c0 08 48
                     89 51 10 48 8b 51 10 48 c7 c6 c0 51 9d a0 48 c7 c7 a6 51 9d a0 <48>
                     89 02 48 8b 51 08 48 89 42 08 48 b8 00 02 20 00 00 00 ad de
[  912.799544] RIP  [<ffffffffa09d4d6d>] cls_bpf_change+0x23d/0x268 [cls_bpf]
[  912.799544]  RSP <ffff88005f7379c8>
[  912.799545] CR2: 0000000000000000
[  912.807380] ---[ end trace a6440067cfdc7c29 ]---

I've split them into 3 patches, so they can be backported easier
when needed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The following test case causes a NULL pointer dereference in cls_flow:

  tc filter add dev foo parent 1: handle 0x1 flow hash keys dst action ok
  tc filter replace dev foo parent 1: pref 49152 handle 0x1 \
            flow hash keys mark action drop

To be more precise, actually two different panics are fixed, the first
occurs because tcf_exts_init() is not called on the newly allocated
filter when we do a replace. And the second panic uncovered after that
happens since the arguments of list_replace_rcu() are swapped, the old
element needs to be the first argument and the new element the second.

Fixes: 70da9f0b ("net: sched: cls_flow use RCU")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The following test case causes a NULL pointer dereference in cls_flower:

  tc filter add dev foo parent 1: flower eth_type ipv4 action ok flowid 1:1
  tc filter replace dev foo parent 1: pref 49152 handle 0x1 \
            flower eth_type ipv6 action ok flowid 1:1

The problem is that commit 77b9900e ("tc: introduce Flower classifier")
accidentally swapped the arguments of list_replace_rcu(), the old
element needs to be the first argument and the new element the second.

Fixes: 77b9900e ("tc: introduce Flower classifier")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

The following test case causes a NULL pointer dereference in cls_bpf:

  FOO="1,6 0 0 4294967295,"
  tc filter add dev foo parent 1: bpf bytecode "$FOO" flowid 1:1 action ok
  tc filter replace dev foo parent 1: pref 49152 handle 0x1 \
            bpf bytecode "$FOO" flowid 1:1 action drop

The problem is that commit 1f947bf1 ("net: sched: rcu'ify cls_bpf")
accidentally swapped the arguments of list_replace_rcu(), the old
element needs to be the first argument and the new element the second.

Fixes: 1f947bf1 ("net: sched: rcu'ify cls_bpf")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2015-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Some fixes for the current cycle:

 1. Arik introduced an rtnl-locked regulatory API to be able
    to differentiate between place do/don't have the RTNL;
    this fixes missing locking in some of the code paths

 2. Two small mesh bugfixes from Bob, one to avoid treating
    a certain malformed over-the-air frame and one to avoid
    sending a garbage field over the air.

 3. A fix for powersave during WoWLAN suspend from Krishna Chaitanya.

 4. A fix for a powersave vs. aggregation teardown race, from Michal.

 5. Thomas reduced the loglevel of CRDA messages to avoid spamming
    the kernel log with mostly irrelevant information.

 6. Tom fixed a dangling debugfs directory pointer that could cause
    crashes if subsequent addition of the same interface to debugfs
    failed for some reason.

 7. A fix from myself for a list corruption issue in mac80211 during
    combined interface shutdown/removal - shut down interfaces first
    and only then remove them to avoid that.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We store c45 PHY's id information in c45_ids, so it should be used to
check the matching between PHY driver and PHY device for c45 PHY.
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kernel generates a lot of warnings when dst entry reference counter
overflows and becomes negative. That bug was seen several times at
machines with outdated 3.10.y kernels. Most like it's already fixed
in upstream. Anyway that flood completely kills machine and makes
further debugging impossible.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

1) If sk_filter() is applied, skb was leaked (not freed)
2) Testing SOCK_DEAD twice is racy :
   packet could be freed while already queued.
3) Remove obsolete comment about caching skb->len
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sierra Wireless MC7305/MC7355 with USB ID 1199:9041 also provide a
second QMI/network interface like the MC73xx with USB ID 1199:68c0 on
USB interface #10 when used in the appropriate USB configuration.
Add the corresponding QMI_FIXED_INTF entry to the qmi_wwan driver.

Please note that the second QMI/network interface is not working for
early MC73xx firmware versions like 01.08.x as the device does not
respond to QMI messages on the second /dev/cdc-wdm port.
Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The TCCR.TSRQn bit may get clearead after TCCR gets read, so that TCCR write
would get skipped. We don't need to check this bit before setting.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The keystone qmss will raise interrupt when packet arrive at the
receive queue. Only control available to avoid interrupt from happening
is to keep the free descriptor queue (FDQ) empty in the receive side.
So the filling of descriptors into the FDQ has to happen after
request_irq() call is made as part of knav_queue_enable_notify(). So
move the function netcp_rxpool_refill() after this call.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The "follow" fail_over_mac policy is useful for multiport devices that
either become confused or incur a performance penalty when multiple
ports are programmed with the same MAC address, but the same MAC
address still may happened by this steps for this policy:

1) echo +eth0 > /sys/class/net/bond0/bonding/slaves
   bond0 has the same mac address with eth0, it is MAC1.

2) echo +eth1 > /sys/class/net/bond0/bonding/slaves
   eth1 is backup, eth1 has MAC2.

3) ifconfig eth0 down
   eth1 became active slave, bond will swap MAC for eth0 and eth1,
   so eth1 has MAC1, and eth0 has MAC2.

4) ifconfig eth1 down
   there is no active slave, and eth1 still has MAC1, eth2 has MAC2.

5) ifconfig eth0 up
   the eth0 became active slave again, the bond set eth0 to MAC1.

Something wrong here, then if you set eth1 up, the eth0 and eth1 will have the same
MAC address, it will break this policy for ACTIVE_BACKUP mode.

This patch will fix this problem by finding the old active slave and
swap them MAC address before change active slave.
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Tested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.2-20150716' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2015-07-16

this is a pull request of 2 patches by Stefan Agner. He fixes the resume
operation in the mcp251x driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch reverts 19424e05 ("sit:
Add gro callbacks to sit_offload") because it generates packets
that cannot be handled even by our own GSO.
Reported-by: Wolfgang Walter <linux@stwm.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

7445E0 contains an ECO which disconnected the internal SF2 pseudo-PHY which was
known to conflict with the external pseudo-PHY of BCM53125 switches. This
motivated the need to utilize the internal SF2 MDIO controller via indirect
register reads/writes to control external Broadcom switches due to this address
conflict (both responded at address 30d).

For 7445E0, the internal pseudo-PHY of the SF2 switch got disconnected, and as
a consequence this prevents the internal SF2 MDIO bus controller from reading
data (reads back everything as 0) since the MDI line is tied low.

Fix this by making the indirect register reads and writes conditional to
7445D0, on 7445E0 we can utilize the SWITCH_MDIO controller (backed by
mdio-unimac and not the DSA created slave MII bus).

We utilize of_machine_is_compatible() here since this is the only way for use
to differentiate between these two chips in a way that does not violate layers
or becomes (too) vendor-specific.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>