- 10 May, 2018 2 commits
-
-
David Howells authored
The expect_rx_by call timeout is supposed to be set when a call is started to indicate that we need to receive a packet by that point. This is currently put back every time we receive a packet, but it isn't started when we first send a packet. Without this, the call may wait forever if the server doesn't deign to reply. Fix this by setting the timeout upon a successful UDP sendmsg call for the first DATA packet. The timeout is initiated only for initial transmission and not for subsequent retries as we don't want the retry mechanism to extend the timeout indefinitely. Fixes: a158bdd3 ("rxrpc: Fix call timeouts") Reported-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
David Howells <dhowells@redhat.com>
-
Sun Lianwen authored
There are follow comment errors: 1 The function name is wrong in p9_release_pages() comment. 2 The function name and variable name is wrong in p9_poll_workfn() comment. 3 There is no variable dm_mr and lkey in struct p9_trans_rdma. 4 The function name is wrong in rdma_create_trans() comment. 5 There is no variable initialized in struct virtio_chan. 6 The variable name is wrong in p9_virtio_zc_request() comment. Signed-off-by:
Sun Lianwen <sunlw.fnst@cn.fujitsu.com> Reviewed-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
- 09 May, 2018 1 commit
-
-
Heiner Kallweit authored
Since commit a92a0849 "r8169: improve runtime pm in general and suspend unused ports" interfaces w/o link are runtime-suspended after 10s. On systems where drivers take longer to load this can lead to the situation that the interface is runtime-suspended already when it's initially brought up. This shouldn't be a problem because rtl_open() resumes MAC/PHY. However with at least one chip version the interface doesn't properly come up, as reported here: https://bugzilla.kernel.org/show_bug.cgi?id=199549 The vendor driver uses a delay to give certain chip versions some time to resume before starting the PHY configuration. So let's do the same. I don't know which chip versions may be affected, therefore apply this delay always. This patch was reported to fix the issue for RTL8168h. I was able to reproduce the issue on an Asus H310I-Plus which also uses a RTL8168h. Also in my case the patch fixed the issue. Reported-by:
Slava Kardakov <ojab@ojab.ru> Tested-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
- 08 May, 2018 24 commits
-
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-4.17-20180508' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2018-05-08 this is a pull request for 7 patches for net/master. The first patch is by Jakob Unterwurzacher and increases the severity of bus-off messages in the generic CAN device infrastructure. The next two patches are by Uwe Kleine-König and fix the endianess detection in the flexcan driver. Jimmy Assarsson's patch for the kvaser driver corrects the stats counter for dropped tx-messages. Geert Uytterhoeven provides one patch and Sergei Shtylyov two patches for the rcan_canfd device tree binding description. ==================== Signed-off-by:
-
David S. Miller authored
Merge branch 'ieee802154-for-davem-2018-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 2018-05-08 An update from ieee802154 for your *net* tree. Two fixes for the mcr20a driver, which was being added in the 4.17 merge window, by Gustavo and myself. The atusb driver got a change to GFP_KERNEL where no GFP_ATOMIC is needed by Jia-Ju. The last and most important fix is from Alex to get IPv6 reassembly working again for the ieee802154 6lowpan adaptation. This got broken in 4.16 so please queue this one also up for the 4.16 stable tree. ==================== Signed-off-by:
-
Sergei Shtylyov authored
Document the R-Car V3H (R8A77980) SoC support in the R-Car CAN-FD bindings. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Sergei Shtylyov authored
Document the R-Car V3M (R8A77970) SoC support in the R-Car CAN-FD bindings. Signed-off-by:
Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Reviewed-by:
-
Geert Uytterhoeven authored
R8A7796 is R-Car M3-W. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
-
Jimmy Assarsson authored
Increase rx_dropped, if alloc_can_skb() fails, not tx_dropped. Signed-off-by:
Jimmy Assarsson <extja@kvaser.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Uwe Kleine-König authored
Commit d50f4630 ("arm: dts: Remove p1010-flexcan compatible from imx series dts") removed the fallback compatible "fsl,p1010-flexcan" from the imx device trees. As the flexcan cores on i.MX25, i.MX35 and i.MX53 are identical, introduce the first as fallback for the two latter ones. Fixes: d50f4630 ("arm: dts: Remove p1010-flexcan compatible from imx series dts") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: linux-stable <stable@vger.kernel.org> # >= v4.16 Signed-off-by:
-
Uwe Kleine-König authored
In commit 88462d2a ("can: flexcan: Remodel FlexCAN register r/w APIs for big endian FlexCAN controllers.") the following logic was implemented: if the dt property "big-endian" is given or the device is compatible to "fsl,p1010-flexcan": use big-endian mode; else use little-endian mode; This relies on commit d50f4630 ("arm: dts: Remove p1010-flexcan compatible from imx series dts") which was applied a few commits later. Without this commit (or an old device tree used for booting a new kernel) the flexcan devices on i.MX25, i.MX28, i.MX35 and i.MX53 match the 'the device is compatible to "fsl,p1010-flexcan"' test and so are switched erroneously to big endian mode. Instead of the check above put a quirk in devtype data and rely on of_match_device yielding the most compatible match Fixes: 88462d2a ("can: flexcan: Remodel FlexCAN register r/w APIs for big endian FlexCAN controllers.") Signed-off-by:
Gavin Schenk <g.schenk@eckelmann.de> Cc: linux-stable <stable@vger.kernel.org> # >= v4.16 Signed-off-by:
-
Jakob Unterwurzacher authored
bus-off is usually caused by hardware malfunction or configuration error (baud rate mismatch) and causes a complete loss of communication. Increase the "bus-off" message's severity from netdev_dbg() to netdev_info() to make it visible to the user. A can interface going into bus-off is similar in severity to ethernet's "Link is Down" message, which is also printed at info level. It is debatable whether the the "restarted" message should also be changed to netdev_info() to make the interface state changes comprehensible from the kernel log. I have chosen to keep the "restarted" message at dbg for now as the "bus-off" message should be enough for the user to notice and investigate the problem. Signed-off-by:
Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Cc: linux-can@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Eric Dumazet authored
syzbot loves to set very small mtu on devices, since it brings joy. We must make llc_ui_sendmsg() fool proof. usercopy: Kernel memory overwrite attempt detected to wrapped address (offset 0, size 18446612139802320068)! kernel BUG at mm/usercopy.c:100! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 17464 Comm: syz-executor1 Not tainted 4.17.0-rc3+ #36 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:usercopy_abort+0xbb/0xbd mm/usercopy.c:88 RSP: 0018:ffff8801868bf800 EFLAGS: 00010282 RAX: 000000000000006c RBX: ffffffff87d2fb00 RCX: 0000000000000000 RDX: 000000000000006c RSI: ffffffff81610731 RDI: ffffed0030d17ef6 RBP: ffff8801868bf858 R08: ffff88018daa4200 R09: ffffed003b5c4fb0 R10: ffffed003b5c4fb0 R11: ffff8801dae27d87 R12: ffffffff87d2f8e0 R13: ffffffff87d2f7a0 R14: ffffffff87d2f7a0 R15: ffffffff87d2f7a0 FS: 00007f56a14ac700(0000) GS:ffff8801dae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2bc21000 CR3: 00000001abeb1000 CR4: 00000000001426f0 DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000030602 Call Trace: check_bogus_address mm/usercopy.c:153 [inline] __check_object_size+0x5d9/0x5d9 mm/usercopy.c:256 check_object_size include/linux/thread_info.h:108 [inline] check_copy_size include/linux/thread_info.h:139 [inline] copy_from_iter_full include/linux/uio.h:121 [inline] memcpy_from_msg include/linux/skbuff.h:3305 [inline] llc_ui_sendmsg+0x4b1/0x1530 net/llc/af_llc.c:941 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:639 __sys_sendto+0x3d7/0x670 net/socket.c:1789 __do_sys_sendto net/socket.c:1801 [inline] __se_sys_sendto net/socket.c:1797 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x455979 RSP: 002b:00007f56a14abc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f56a14ac6d4 RCX: 0000000000455979 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000018 RBP: 000000000072bea0 R08: 00000000200012c0 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000548 R14: 00000000006fbf60 R15: 0000000000000000 Code: 55 c0 e8 c0 55 bb ff ff 75 c8 48 8b 55 c0 4d 89 f9 ff 75 d0 4d 89 e8 48 89 d9 4c 89 e6 41 56 48 c7 c7 80 fa d2 87 e8 a0 0b a3 ff <0f> 0b e8 95 55 bb ff e8 c0 a8 f7 ff 8b 95 14 ff ff ff 4d 89 e8 RIP: usercopy_abort+0xbb/0xbd mm/usercopy.c:88 RSP: ffff8801868bf800 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
David S. Miller authored
Igor Russkikh says: ==================== Aquantia various patches 2018-05 These are two patches covering issues found during test cycles: First is that driver should declare valid vlan_features Second fix is about correct allocation of MSI interrupts on some systems. ==================== Signed-off-by: -
Igor Russkikh authored
Driver should use pci_alloc_irq_vectors return value to correct number of allocated vectors and napi instances. Otherwise it'll panic later in pci_irq_vector. Driver also should allow more than one MSI vectors to be allocated. Error return path from pci_alloc_irq_vectors is also fixed to revert resources in a correct sequence when error happens. Reported-by:
Long, Nicholas <nicholas.a.long@baesystems.com> Fixes: 23ee07ad ("net: aquantia: Cleanup pci functions module") Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
-
Igor Russkikh authored
In particular, not reporting SG forced skbs to be linear for vlan interfaces over atlantic NIC. With this fix it is possible to enable SG feature on device and therefore optimize performance. Reported-by:
Ma Yuying <yuma@redhat.com> Signed-off-by:
-
Georg Hofmann authored
This patch removes "experimental" from the help text where depends on CONFIG_EXPERIMENTAL was already removed. Signed-off-by:
Georg Hofmann <georg@hofmannsweb.com> Signed-off-by:
-
Steffen Klassert authored
Replace my old E-Mail address with a working one. While at it, change the maintainance status to 'Odd Fixes'. I'm still around with some knowledge, but don't actively maintain it anymore. Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2018-05-07 1) Always verify length of provided sadb_key to fix a slab-out-of-bounds read in pfkey_add. From Kevin Easton. 2) Make sure that all states are really deleted before we check that the state lists are empty. Otherwise we trigger a warning. 3) Fix MTU handling of the VTI6 interfaces on interfamily tunnels. From Stefano Brivio. ==================== Signed-off-by: -
Andre Tomt authored
In the case of writing a partial tls record we forgot to clear the ctx->in_tcp_sendpages flag, causing some connections to stall. Fixes: c212d2c7 ("net/tls: Don't recursively call push_record during tls_write_space callbacks") Signed-off-by:
Andre Tomt <andre@tomt.net> Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Andrew Lunn authored
Most of the mv88e6xxx switches have the PHYs at address 0, 1, 2, ... The 6341 however has the PHYs at 0x10, 0x11, 0x12. Add a parameter to the info structure for this base address. Testing of 6f88284f ("net: dsa: mv88e6xxx: Add MDIO interrupts for internal PHYs") was performed on the 6341. So it works only on the 6341. Use this base information to correctly set the interrupt. Fixes: 6f88284f ("net: dsa: mv88e6xxx: Add MDIO interrupts for internal PHYs") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Eric Dumazet authored
syzbot reported a use-after-free in tls_sk_proto_close Add a boolean value to cleanup a bit this function. BUG: KASAN: use-after-free in tls_sk_proto_close+0x8ab/0x9c0 net/tls/tls_main.c:297 Read of size 1 at addr ffff8801ae40a858 by task syz-executor363/4503 CPU: 0 PID: 4503 Comm: syz-executor363 Not tainted 4.17.0-rc3+ #34 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430 tls_sk_proto_close+0x8ab/0x9c0 net/tls/tls_main.c:297 inet_release+0x104/0x1f0 net/ipv4/af_inet.c:427 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:460 sock_release+0x96/0x1b0 net/socket.c:594 sock_close+0x16/0x20 net/socket.c:1149 __fput+0x34d/0x890 fs/file_table.c:209 ____fput+0x15/0x20 fs/file_table.c:243 task_work_run+0x1e4/0x290 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x1aee/0x2730 kernel/exit.c:865 do_group_exit+0x16f/0x430 kernel/exit.c:968 get_signal+0x886/0x1960 kernel/signal.c:2469 do_signal+0x98/0x2040 arch/x86/kernel/signal.c:810 exit_to_usermode_loop+0x28a/0x310 arch/x86/entry/common.c:162 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:265 [inline] do_syscall_64+0x6ac/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4457b9 RSP: 002b:00007fdf4d766da8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 00000000006dac3c RCX: 00000000004457b9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000006dac3c RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dac38 R13: 3692738801137283 R14: 6bf92c39443c4c1d R15: 0000000000000006 Allocated by task 4498: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553 kmem_cache_alloc_trace+0x152/0x780 mm/slab.c:3620 kmalloc include/linux/slab.h:512 [inline] kzalloc include/linux/slab.h:701 [inline] create_ctx net/tls/tls_main.c:521 [inline] tls_init+0x1f9/0xb00 net/tls/tls_main.c:633 tcp_set_ulp+0x1bc/0x520 net/ipv4/tcp_ulp.c:153 do_tcp_setsockopt.isra.39+0x44a/0x2600 net/ipv4/tcp.c:2588 tcp_setsockopt+0xc1/0xe0 net/ipv4/tcp.c:2893 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3039 __sys_setsockopt+0x1bd/0x390 net/socket.c:1903 __do_sys_setsockopt net/socket.c:1914 [inline] __se_sys_setsockopt net/socket.c:1911 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 4503: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kfree+0xd9/0x260 mm/slab.c:3813 tls_sw_free_resources+0x2a3/0x360 net/tls/tls_sw.c:1037 tls_sk_proto_close+0x67c/0x9c0 net/tls/tls_main.c:288 inet_release+0x104/0x1f0 net/ipv4/af_inet.c:427 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:460 sock_release+0x96/0x1b0 net/socket.c:594 sock_close+0x16/0x20 net/socket.c:1149 __fput+0x34d/0x890 fs/file_table.c:209 ____fput+0x15/0x20 fs/file_table.c:243 task_work_run+0x1e4/0x290 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x1aee/0x2730 kernel/exit.c:865 do_group_exit+0x16f/0x430 kernel/exit.c:968 get_signal+0x886/0x1960 kernel/signal.c:2469 do_signal+0x98/0x2040 arch/x86/kernel/signal.c:810 exit_to_usermode_loop+0x28a/0x310 arch/x86/entry/common.c:162 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:265 [inline] do_syscall_64+0x6ac/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8801ae40a800 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 88 bytes inside of 256-byte region [ffff8801ae40a800, ffff8801ae40a900) The buggy address belongs to the page: page:ffffea0006b90280 count:1 mapcount:0 mapping:ffff8801ae40a080 index:0x0 flags: 0x2fffc0000000100(slab) raw: 02fffc0000000100 ffff8801ae40a080 0000000000000000 000000010000000c raw: ffffea0006bea9e0 ffffea0006bc94a0 ffff8801da8007c0 0000000000000000 page dumped because: kasan: bad access detected Fixes: dd0bed16 ("tls: support for Inline tls record") Signed-off-by:
-
Xin Long authored
Now sctp only delays the authentication for the normal cookie-echo chunk by setting chunk->auth_chunk in sctp_endpoint_bh_rcv(). But for the duplicated one with auth, in sctp_assoc_bh_rcv(), it does authentication first based on the old asoc, which will definitely fail due to the different auth info in the old asoc. The duplicated cookie-echo chunk will create a new asoc with the auth info from this chunk, and the authentication should also be done with the new asoc's auth info for all of the collision 'A', 'B' and 'D'. Otherwise, the duplicated cookie-echo chunk with auth will never pass the authentication and create the new connection. This issue exists since very beginning, and this fix is to make sctp_assoc_bh_rcv() follow the way sctp_endpoint_bh_rcv() does for the normal cookie-echo chunk to delay the authentication. While at it, remove the unused params from sctp_sf_authenticate() and define sctp_auth_chunk_verify() used for all the places that do the delayed authentication. v1->v2: fix the typo in changelog as Marcelo noticed. Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Moritz Fischer authored
Fixes the following warnings: warning: pointer targets in passing argument 1 of ‘is_valid_ether_addr’ differ in signedness [-Wpointer-sign] if (mac_addr && is_valid_ether_addr(mac_addr)) { ^~~~~~~~ expected ‘const u8 * {aka const unsigned char *}’ but argument is of type ‘const char *’ static inline bool is_valid_ether_addr(const u8 *addr) ^~~~~~~~~~~~~~~~~~~ warning: pointer targets in passing argument 2 of ‘ether_addr_copy’ differ in signedness [-Wpointer-sign] ether_addr_copy(ndev->dev_addr, mac_addr); ^~~~~~~~ expected ‘const u8 * {aka const unsigned char *}’ but argument is of type ‘const char *’ static inline void ether_addr_copy(u8 *dst, const u8 *src) Signed-off-by:Moritz Fischer <mdf@kernel.org> Signed-off-by:
-
Moritz Fischer authored
Fix issue where nixge_get_nvmem_address() returns a non-NULL return value on a failed nvmem_cell_get() that causes an invalid access when error value encoded in pointer is dereferenced. Furthermore ensure that buffer allocated by nvmem_cell_read() actually gets kfreed() if the function succeeds. Fixes commit 492caffa ("net: ethernet: nixge: Add support for National Instruments XGE netdev") Reported-by:
Alex Williams <alex.williams@ni.com> Signed-off-by:
-
Anders Roxell authored
When a script file that isn't generated uses the variable TEST_GEN_PROGS_EXTENDED and a 'make -C tools/testing/selftests clean' is performed the script file gets removed and git shows the file as deleted. For script files that isn't generated TEST_PROGS_EXTENDED should be used. Fixes: 9faedd64 ("selftests: net: add in_netns.sh TEST_GEN_PROGS_EXTENDED") Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
-
- 07 May, 2018 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
Johan Hedberg says: ==================== pull request: bluetooth 2018-05-07 Here are a few more Bluetooth fixes for the 4.17 kernel, all for the btusb driver. Two relate to the needs_reset_resume table, and one is a revert of a patch for Atheros 1525/QCA6174 which caused a regression for some people. ==================== Signed-off-by:
-
- 04 May, 2018 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2018-05-05 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Sanitize attr->{prog,map}_type from bpf(2) since used as an array index to retrieve prog/map specific ops such that we prevent potential out of bounds value under speculation, from Mark and Daniel. ==================== Signed-off-by: -
Antoine Tenart authored
In an SFP EEPROM values can be read to get information about a given SFP module. One of those is the bitrate, which can be determined using a nominal bitrate in addition with min and max values (in %). The SFP code currently compute both BR,min and BR,max values thanks to this nominal and min,max values. This patch fixes the BR,min computation as the min value should be subtracted to the nominal one, not added. Fixes: 9962acf7 ("sfp: add support for 1000Base-PX and 1000Base-BX10") Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
-
Rob Taglang authored
Currently, skb->len and skb->data_len are set to the page size, not the packet size. This causes the frame check sequence to not be located at the "end" of the packet resulting in ethernet frame check errors. The driver does work currently, but stricter kernel facing networking solutions like OpenVSwitch will drop these packets as invalid. These changes set the packet size correctly so that these errors no longer occur. The length does not include the frame check sequence, so that subtraction was removed. Tested on Oracle/SUN Multithreaded 10-Gigabit Ethernet Network Controller [108e:abcd] and validated in wireshark. Signed-off-by:
Rob Taglang <rob@taglang.io> Signed-off-by:
-
YU Bo authored
Making sure the headers line up properly with the actual value output of the command `cat /proc/net/netlink` Before the patch: <sk Eth Pid Groups Rmem Wmem Dump Locks Drops Inode <ffff8cd2c2f7b000 0 909 00000550 0 0 0 2 0 18946 After the patch: >sk Eth Pid Groups Rmem Wmem Dump Locks Drops Inode >0000000033203952 0 897 00000113 0 0 0 2 0 14906 Signed-off-by:
Bo YU <tsu.yubo@gmail.com> Signed-off-by:
-
Michael Chan authored
tg3_free_consistent() calls dma_free_coherent() to free tp->hw_stats under spinlock and can trigger BUG_ON() in vunmap() because vunmap() may sleep. Fix it by removing the spinlock and relying on the TG3_FLAG_INIT_COMPLETE flag to prevent race conditions between tg3_get_stats64() and tg3_free_consistent(). TG3_FLAG_INIT_COMPLETE is always cleared under tp->lock before tg3_free_consistent() and therefore tg3_get_stats64() can safely access tp->hw_stats under tp->lock if TG3_FLAG_INIT_COMPLETE is set. Fixes: f5992b72 ("tg3: Fix race condition in tg3_get_stats64().") Reported-by:
Zumeng Chen <zumeng.chen@gmail.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Eric Dumazet authored
syzbot caught an infinite recursion in nsh_gso_segment(). Problem here is that we need to make sure the NSH header is of reasonable length. BUG: MAX_LOCK_DEPTH too low! turning off the locking correctness validator. depth: 48 max: 48! 48 locks held by syz-executor0/10189: #0: (ptrval) (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x30f/0x34c0 net/core/dev.c:3517 #1: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #1: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #2: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #2: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #3: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #3: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #4: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #4: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #5: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #5: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #6: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #6: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #7: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #7: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #8: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #8: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #9: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #9: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #10: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #10: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #11: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #11: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #12: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #12: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #13: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #13: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #14: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #14: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #15: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #15: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #16: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #16: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #17: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #17: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #18: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #18: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #19: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #19: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #20: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #20: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #21: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #21: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #22: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #22: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #23: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #23: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #24: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #24: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #25: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #25: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #26: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #26: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #27: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #27: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #28: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #28: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #29: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #29: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #30: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #30: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #31: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #31: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 dccp_close: ABORT with 65423 bytes unread #32: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #32: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #33: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #33: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #34: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #34: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #35: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #35: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #36: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #36: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #37: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #37: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #38: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #38: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #39: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #39: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #40: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #40: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #41: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #41: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #42: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #42: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #43: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #43: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #44: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #44: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #45: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #45: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #46: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #46: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #47: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #47: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 INFO: lockdep is turned off. CPU: 1 PID: 10189 Comm: syz-executor0 Not tainted 4.17.0-rc2+ #26 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 __lock_acquire+0x1788/0x5140 kernel/locking/lockdep.c:3449 lock_acquire+0x1dc/0x520 kernel/locking/lockdep.c:3920 rcu_lock_acquire include/linux/rcupdate.h:246 [inline] rcu_read_lock include/linux/rcupdate.h:632 [inline] skb_mac_gso_segment+0x25b/0x720 net/core/dev.c:2789 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 __skb_gso_segment+0x3bb/0x870 net/core/dev.c:2865 skb_gso_segment include/linux/netdevice.h:4025 [inline] validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3118 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3168 sch_direct_xmit+0x354/0x11e0 net/sched/sch_generic.c:312 qdisc_restart net/sched/sch_generic.c:399 [inline] __qdisc_run+0x741/0x1af0 net/sched/sch_generic.c:410 __dev_xmit_skb net/core/dev.c:3243 [inline] __dev_queue_xmit+0x28ea/0x34c0 net/core/dev.c:3551 dev_queue_xmit+0x17/0x20 net/core/dev.c:3616 packet_snd net/packet/af_packet.c:2951 [inline] packet_sendmsg+0x40f8/0x6070 net/packet/af_packet.c:2976 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:639 __sys_sendto+0x3d7/0x670 net/socket.c:1789 __do_sys_sendto net/socket.c:1801 [inline] __se_sys_sendto net/socket.c:1797 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: c411ed85 ("nsh: add GSO support") Signed-off-by:Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Gustavo A. R. Silva authored
ioc_data.dev_num can be controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: net/atm/lec.c:702 lec_vcc_attach() warn: potential spectre issue 'dev_lec' Fix this by sanitizing ioc_data.dev_num before using it to index dev_lec. Also, notice that there is another instance in which array dev_lec is being indexed using ioc_data.dev_num at line 705: lec_vcc_added(netdev_priv(dev_lec[ioc_data.dev_num]), Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
pool can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/atm/zatm.c:1462 zatm_ioctl() warn: potential spectre issue 'zatm_dev->pool_info' (local cap) Fix this by sanitizing pool before using it to index zatm_dev->pool_info Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
-
Stefano Brivio authored
If an OVS_ATTR_NESTED attribute type is found while walking through netlink attributes, we call nlattr_set() recursively passing the length table for the following nested attributes, if different from the current one. However, once we're done with those sub-nested attributes, we should continue walking through attributes using the current table, instead of using the one related to the sub-nested attributes. For example, given this sequence: 1 OVS_KEY_ATTR_PRIORITY 2 OVS_KEY_ATTR_TUNNEL 3 OVS_TUNNEL_KEY_ATTR_ID 4 OVS_TUNNEL_KEY_ATTR_IPV4_SRC 5 OVS_TUNNEL_KEY_ATTR_IPV4_DST 6 OVS_TUNNEL_KEY_ATTR_TTL 7 OVS_TUNNEL_KEY_ATTR_TP_SRC 8 OVS_TUNNEL_KEY_ATTR_TP_DST 9 OVS_KEY_ATTR_IN_PORT 10 OVS_KEY_ATTR_SKB_MARK 11 OVS_KEY_ATTR_MPLS we switch to the 'ovs_tunnel_key_lens' table on attribute #3, and we don't switch back to 'ovs_key_lens' while setting attributes #9 to #11 in the sequence. As OVS_KEY_ATTR_MPLS evaluates to 21, and the array size of 'ovs_tunnel_key_lens' is 15, we also get this kind of KASan splat while accessing the wrong table: [ 7654.586496] ================================================================== [ 7654.594573] BUG: KASAN: global-out-of-bounds in nlattr_set+0x164/0xde9 [openvswitch] [ 7654.603214] Read of size 4 at addr ffffffffc169ecf0 by task handler29/87430 [ 7654.610983] [ 7654.612644] CPU: 21 PID: 87430 Comm: handler29 Kdump: loaded Not tainted 3.10.0-866.el7.test.x86_64 #1 [ 7654.623030] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016 [ 7654.631379] Call Trace: [ 7654.634108] [<ffffffffb65a7c50>] dump_stack+0x19/0x1b [ 7654.639843] [<ffffffffb53ff373>] print_address_description+0x33/0x290 [ 7654.647129] [<ffffffffc169b37b>] ? nlattr_set+0x164/0xde9 [openvswitch] [ 7654.654607] [<ffffffffb53ff812>] kasan_report.part.3+0x242/0x330 [ 7654.661406] [<ffffffffb53ff9b4>] __asan_report_load4_noabort+0x34/0x40 [ 7654.668789] [<ffffffffc169b37b>] nlattr_set+0x164/0xde9 [openvswitch] [ 7654.676076] [<ffffffffc167ef68>] ovs_nla_get_match+0x10c8/0x1900 [openvswitch] [ 7654.684234] [<ffffffffb61e9cc8>] ? genl_rcv+0x28/0x40 [ 7654.689968] [<ffffffffb61e7733>] ? netlink_unicast+0x3f3/0x590 [ 7654.696574] [<ffffffffc167dea0>] ? ovs_nla_put_tunnel_info+0xb0/0xb0 [openvswitch] [ 7654.705122] [<ffffffffb4f41b50>] ? unwind_get_return_address+0xb0/0xb0 [ 7654.712503] [<ffffffffb65d9355>] ? system_call_fastpath+0x1c/0x21 [ 7654.719401] [<ffffffffb4f41d79>] ? update_stack_state+0x229/0x370 [ 7654.726298] [<ffffffffb4f41d79>] ? update_stack_state+0x229/0x370 [ 7654.733195] [<ffffffffb53fe4b5>] ? kasan_unpoison_shadow+0x35/0x50 [ 7654.740187] [<ffffffffb53fe62a>] ? kasan_kmalloc+0xaa/0xe0 [ 7654.746406] [<ffffffffb53fec32>] ? kasan_slab_alloc+0x12/0x20 [ 7654.752914] [<ffffffffb53fe711>] ? memset+0x31/0x40 [ 7654.758456] [<ffffffffc165bf92>] ovs_flow_cmd_new+0x2b2/0xf00 [openvswitch] [snip] [ 7655.132484] The buggy address belongs to the variable: [ 7655.138226] ovs_tunnel_key_lens+0xf0/0xffffffffffffd400 [openvswitch] [ 7655.145507] [ 7655.147166] Memory state around the buggy address: [ 7655.152514] ffffffffc169eb80: 00 00 00 00 00 00 00 00 00 00 fa fa fa fa fa fa [ 7655.160585] ffffffffc169ec00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7655.168644] >ffffffffc169ec80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa fa [ 7655.176701] ^ [ 7655.184372] ffffffffc169ed00: fa fa fa fa 00 00 00 00 fa fa fa fa 00 00 00 05 [ 7655.192431] ffffffffc169ed80: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00 [ 7655.200490] ================================================================== Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Fixes: 982b5270 ("openvswitch: Fix mask generation for nested attributes.") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Bhadram Varka authored
It adds support for BCM89610 (Single-Port 10/100/1000BASE-T) transceiver which is used in P3310 Tegra186 platform. Signed-off-by:
Bhadram Varka <vbhadram@nvidia.com> Signed-off-by:
-
Linus Torvalds authored
Merge tag 'linux-kselftest-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "This Kselftest update for 4.17-rc4 consists of a fix for a syntax error in the script that runs selftests. Mathieu Desnoyers found this bug in the script on systems running GNU Make 3.8 or older" * tag 'linux-kselftest-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: Fix lib.mk run_tests target shell script
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Various sockmap fixes from John Fastabend (pinned map handling, blocking in recvmsg, double page put, error handling during redirect failures, etc.) 2) Fix dead code handling in x86-64 JIT, from Gianluca Borello. 3) Missing device put in RDS IB code, from Dag Moxnes. 4) Don't process fast open during repair mode in TCP< from Yuchung Cheng. 5) Move address/port comparison fixes in SCTP, from Xin Long. 6) Handle add a bond slave's master into a bridge properly, from Hangbin Liu. 7) IPv6 multipath code can operate on unitialized memory due to an assumption that the icmp header is in the linear SKB area. Fix from Eric Dumazet. 8) Don't invoke do_tcp_sendpages() recursively via TLS, from Dave Watson. 9) Fix memory leaks in x86-64 JIT, from Daniel Borkmann. 10) RDS leaks kernel memory to userspace, from Eric Dumazet. 11) DCCP can invoke a tasklet on a freed socket, take a refcount. Also from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (78 commits) dccp: fix tasklet usage smc: fix sendpage() call net/smc: handle unregistered buffers net/smc: call consolidation qed: fix spelling mistake: "offloded" -> "offloaded" net/mlx5e: fix spelling mistake: "loobpack" -> "loopback" tcp: restore autocorking rds: do not leak kernel memory to user land qmi_wwan: do not steal interfaces from class drivers ipv4: fix fnhe usage by non-cached routes bpf: sockmap, fix error handling in redirect failures bpf: sockmap, zero sg_size on error when buffer is released bpf: sockmap, fix scatterlist update on error path in send with apply net_sched: fq: take care of throttled flows before reuse ipv6: Revert "ipv6: Allow non-gateway ECMP for IPv6" bpf, x64: fix memleak when not converging on calls bpf, x64: fix memleak when not converging after image net/smc: restrict non-blocking connect finish 8139too: Use disable_irq_nosync() in rtl8139_poll_controller() sctp: fix the issue that the cookie-ack with auth can't get processed ...
-
