Now that we're storing usb_interface at em28xx struct,
there's no good reason to keep storing usb_device, as we can
get it from usb_interface. So, get rid of it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The usb_device->dev is not the right device for dev_foo() calls.
Instead, it should use usb_interface->dev.
Tested-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Changing the device name, causes it to be unable to remove the
sysfs file, causing troubles if a device is removed and then
re-inserted.

[ 1010.310320] WARNING: CPU: 3 PID: 119 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x7b/0x90
[ 1010.310323] sysfs: cannot create duplicate filename '/bus/usb/devices/1-3.3'
[ 1010.310325] Modules linked in: lgdt330x em28xx_dvb dvb_core em28xx_alsa tuner_xc2028 tuner tvp5150 em28xx_v4l videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core em28xx tveeprom v4l2_common videodev media xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ip_tables x_tables cmac bnep cpufreq_powersave cpufreq_conservative cpufreq_userspace binfmt_misc parport_pc ppdev lp parport snd_hda_codec_hdmi iTCO_wdt snd_hda_codec_realtek iTCO_vendor_support snd_hda_codec_generic arc4 intel_rapl x86_pkg_temp_thermal iwlmvm intel_powerclamp coretemp kvm_intel mac80211 kvm i915
[ 1010.310383]  irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel iwlwifi pl2303 aesni_intel btusb aes_x86_64 usbserial lrw btrtl gf128mul glue_helper btbcm ablk_helper cryptd btintel bluetooth drm_kms_helper cfg80211 drm psmouse pcspkr i2c_i801 e1000e serio_raw snd_hda_intel snd_soc_rt5640 snd_hda_codec snd_soc_rl6231 snd_soc_ssm4567 mei_me i2c_smbus rfkill snd_hda_core ptp mei snd_soc_core ehci_pci sg lpc_ich shpchp mfd_core ehci_hcd pps_core snd_hwdep i2c_algo_bit snd_compress snd_pcm sdhci_acpi snd_timer battery snd sdhci elan_i2c snd_soc_sst_acpi mmc_core fjes dw_dmac i2c_hid soundcore snd_soc_sst_match i2c_designware_platform video i2c_designware_core acpi_pad acpi_als kfifo_buf tpm_tis button industrialio tpm_tis_core tpm ext4 crc16 jbd2 fscrypto mbcache dm_mod joydev evdev hid_logitech_hidpp
[ 1010.310449]  sd_mod hid_logitech_dj usbhid hid ahci libahci crc32c_intel libata xhci_pci xhci_hcd scsi_mod usbcore fan thermal
[ 1010.310464] CPU: 3 PID: 119 Comm: kworker/3:2 Not tainted 4.9.0-rc8+ #14
[ 1010.310466] Hardware name:                  /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015
[ 1010.310487] Workqueue: usb_hub_wq hub_event [usbcore]
[ 1010.310490]  0000000000000000 ffffffff848f56c5 ffff8803b1f7f858 0000000000000000
[ 1010.310496]  ffffffff8414f8f8 ffff88030000001f ffffed00763eff07 ffff8803b1f7f8f0
[ 1010.310501]  ffff8803b3ea1e60 0000000000000001 ffffffffffffffef ffff8803b45c6840
[ 1010.310505] Call Trace:
[ 1010.310517]  [<ffffffff848f56c5>] ? dump_stack+0x5c/0x77
[ 1010.310522]  [<ffffffff8414f8f8>] ? __warn+0x168/0x1a0
[ 1010.310526]  [<ffffffff8414f9e4>] ? warn_slowpath_fmt+0xb4/0xf0
[ 1010.310529]  [<ffffffff8414f930>] ? __warn+0x1a0/0x1a0
[ 1010.310534]  [<ffffffff845436c6>] ? kasan_kmalloc+0xa6/0xd0
[ 1010.310539]  [<ffffffff846ec2fa>] ? kernfs_path_from_node+0x4a/0x60
[ 1010.310543]  [<ffffffff846f66eb>] ? sysfs_warn_dup+0x7b/0x90
[ 1010.310547]  [<ffffffff846f6f26>] ? sysfs_do_create_link_sd.isra.2+0xb6/0xd0
[ 1010.310553]  [<ffffffff84cd5a08>] ? bus_add_device+0x318/0x6b0
[ 1010.310557]  [<ffffffff846f8693>] ? sysfs_create_groups+0x83/0x110
[ 1010.310562]  [<ffffffff84ccff87>] ? device_add+0x777/0x1350
[ 1010.310567]  [<ffffffff84ccf810>] ? device_private_init+0x180/0x180
[ 1010.310583]  [<ffffffffc00c0f77>] ? usb_new_device+0x707/0x1030 [usbcore]
[ 1010.310598]  [<ffffffffc00c58c5>] ? hub_event+0x1d65/0x3280 [usbcore]
[ 1010.310604]  [<ffffffff841eb4ab>] ? account_entity_dequeue+0x30b/0x4a0
[ 1010.310618]  [<ffffffffc00c3b60>] ? hub_port_debounce+0x280/0x280 [usbcore]
[ 1010.310624]  [<ffffffff8407ccd0>] ? compat_start_thread+0x80/0x80
[ 1010.310629]  [<ffffffff851f5cb4>] ? __schedule+0x704/0x1770
[ 1010.310633]  [<ffffffff851f55b0>] ? io_schedule_timeout+0x390/0x390
[ 1010.310638]  [<ffffffff84541783>] ? cache_reap+0x173/0x200
[ 1010.310642]  [<ffffffff84197bed>] ? process_one_work+0x4ed/0xe60
[ 1010.310646]  [<ffffffff84198642>] ? worker_thread+0xe2/0xfd0
[ 1010.310650]  [<ffffffff8421f76c>] ? __wake_up_common+0xbc/0x160
[ 1010.310654]  [<ffffffff84198560>] ? process_one_work+0xe60/0xe60
[ 1010.310658]  [<ffffffff841a837c>] ? kthread+0x1cc/0x220
[ 1010.310663]  [<ffffffff841a81b0>] ? kthread_park+0x80/0x80
[ 1010.310667]  [<ffffffff841a81b0>] ? kthread_park+0x80/0x80
[ 1010.310671]  [<ffffffff841a81b0>] ? kthread_park+0x80/0x80
[ 1010.310675]  [<ffffffff852016f5>] ? ret_from_fork+0x25/0x30
Tested-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

A register used to identify chip during probe was overwritten during
firmware download and due to that later probe's for warm chip were
failing. Detect chip from the another register, which is located on
different register bank 2.

Fixes: 94d0eaa4 ("[media] mn88472: move out of staging to media")

Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

A register used to identify chip during probe was overwritten during
firmware download and due to that later probe's for warm chip were
failing. Detect chip from the another register, which is located on
different register bank 2.

Fixes: 7908fad9 ("[media] mn88473: finalize driver")

Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

"c77d17c0 [media] lirc: use-after free" introduces two problems:
cdev_del() can be called with a NULL argument, and the kobject_put()
path will cause a double free.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Exynos5433 SoC has MFC v8 hardware module, but it has more
complex clock hierarchy, so a new compatible is added.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

This patch changes the code for handling clocks. Now clocks are defined
per each device variant, what is a preparation for adding support for
Exynos 5433 MFC V8, which has more clocks than all previous versions.
Also use devm_clk_get() to simplify cleanup path.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

This patch moves preparation of clocks from s5p_mfc_init_pm()
(driver probe) to s5p_mfc_power_on() (start of device operation).
This change will allow to use runtime power usage optimization
on newer Samsung Exynos platforms (for example Exynos 5433).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

After commit "s5p-mfc: Fix clock management in s5p_mfc_release function"
all clocks related functions are called only when MFC device is really
available, so there is no additional check needed for NULL
gate clocks. This patch simplifies the code and kills IS_ERR_OR_NULL
macro usage.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

CONFIG_PM is always enabled on Exynos platforms, so remove dead code
related to early development of MFC driver on platform without PM support.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Move clock disabling before turning power off.  This will enable later
to add calls to clk_prepare/unprepare in the s5p_mfc_power_off() function
to avoid keeping clocks prepared all the time when driver is bound.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The maximum rate of special clock depends on SoC variant and should
be set in device tree via assigned-clock-rates property, so remove
the code which forces special clock to 200MHz.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Some applications don't check error codes from QBUF/DQBUF ioctls,
so don't spam kernel log with errors if they fall into endless loop
trying to queue next buffer after a failure.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

We do video allocation all the time and we need it to be fast.  Plus TLB
efficiency isn't terribly important for video.

That means we want to set DMA_ATTR_ALLOC_SINGLE_PAGES.

See also the previous change (commit 14d3ae2e "ARM: dma-mapping: Use
DMA_ATTR_ALLOC_SINGLE_PAGES hint to optimize allocation").

[m.szyprowski: rebased patch onto v4.9-rc1 and adapted changes
 to latest videbuf2 changes, this simplifies code changes to
 only set proper dma attribute flag and comment the reason
 for it, added commit id of arch/arm/mm patch]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

HSV formats were missing the color encoding, which leads to an invalid
ycbcr_enc value during get_fmt and try_fmt.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Zero is not a valid value for hsv_enc. Set the field to a valid
initial value.

This is not a problem for vivid, because it sets the field to 180 via
tpg_s_hsv_enc() on the control initialization, but it might be a source
of errors for other drivers that use this code.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The cec_allocate_adapter function doesn't need the parent device, only the
cec_register_adapter function needs it.

Drop the cec_devnode parent field, since devnode.dev.parent can be used
instead.

This change makes the framework consistent with other frameworks where the
parent device is not used until the device is registered.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

A recent cleanup introduced a potential dereference of -EFAULT when we
call kfree(map->menu_info).

Fixes: 4cc5bed1 ("[media] uvcvideo: Use memdup_user() rather than duplicating its implementation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

A recent cleanup had the right idea to remove the initialization
of the error variable, but missed the actual benefit of that,
which is that we get warnings if there is a bug in it. Now
we get a warning about a bug that was introduced by this cleanup:

drivers/media/platform/davinci/vpfe_capture.c: In function 'vpfe_probe':
drivers/media/platform/davinci/vpfe_capture.c:1992:9: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]

This adds the missing initialization that the warning is about,
and another one that was preexisting and that we did not get
a warning for. That second bug has existed since the driver
was first added.

Fixes: efb74461 ("[media] DaVinci-VPFE-Capture: Delete an unnecessary variable initialisation in vpfe_probe()")
Fixes: 7da8a6cb ("V4L/DVB (12248): v4l: vpfe capture bridge driver for DM355 and DM6446")

[mchehab@s-opensource.com: fix a merge conflict]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Usually, I don't like fixing coding style issues on non-staging
drivers, as it could be a mess pretty easy, and could become like
a snow ball. That's the case of recent changes on two changesets:
they disalign some statements. Yet, a care a lot with cx88 driver,
as it was the first driver I touched at the Kernel, and I've been
maintaining it since 2005. So, several of the coding style issues
were due to my code.

Per Andrey's suggestion, I ran checkpatch.pl in strict mode, with
fixed several other issues, did some function alinments, but broke
other alinments.

So, I had to manually apply another round of manual fixes to make
sure that everything is ok, and to make checkpatch happy with
this patch.

With this patch, checkpatch.pl is now happy when called with:
	./scripts/checkpatch.pl -f --max-line-length=998 --ignore PREFER_PR_LEVEL

Also, the 80-cols violations that made sense were fixed.

Checkpatch would be happier if we convert it to use dev_foo(),
but this is a more complex change.

NOTE: there are some places with msleep(1). As this driver was
written at the time that the default was to sleep at least 10ms
on such calls (e. g. CONFIG_HZ=100), I replaced those calls by
usleep_range(10000, 20000), with should be safe to avoid breakages.

Fixes: 65bc2fe8 ("[media] cx88: convert it to use pr_foo() macros")
Fixes: 7b61ba8f ("[media] cx88: make checkpatch happier")
Suggested-by: Andrey Utkin <andrey_utkin@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reviewed-by: Andrey Utkin <andrey_utkin@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Commit 4710b752 ("[media] v4l: Add Renesas R-Car FDP1 Driver") in the
v4l-dvb tree adds CONFIG_VIDEO_RENESAS_FDP1.

It calls into the FCP driver, but when there is no dependency, FCP might
be a module while FDP1 is built-in.

We have the same logic in VIDEO_RENESAS_VSP1, which also depends on
FCP not being a module when it is built-in itself.

drivers/media/platform/rcar_fdp1.o: In function `fdp1_pm_runtime_resume':
rcar_fdp1.c:(.text.fdp1_pm_runtime_resume+0x78): undefined reference to `rcar_fcp_enable'
drivers/media/platform/rcar_fdp1.o: In function `fdp1_pm_runtime_suspend':
rcar_fdp1.c:(.text.fdp1_pm_runtime_suspend+0x14): undefined reference to `rcar_fcp_disable'
drivers/media/platform/rcar_fdp1.o: In function `fdp1_probe':
rcar_fdp1.c:(.text.fdp1_probe+0x15c): undefined reference to `rcar_fcp_get'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The new driver produces a warning when CONFIG_PM is disabled:

platform/rcar_fdp1.c:2408:12: error: 'fdp1_pm_runtime_resume' defined but not used [-Werror=unused-function]
platform/rcar_fdp1.c:2399:12: error: 'fdp1_pm_runtime_suspend' defined but not used [-Werror=unused-function]

This marks the two functions as __maybe_unused.

Fixes: 4710b752 ("[media] v4l: Add Renesas R-Car FDP1 Driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Remove obsolete media_device_get_devres(), media_device_find_devres(),
and media_device_release_devres() interfaces. These interfaces are now
obsolete.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

This function is too big and too complex, making really hard
to understand what's there.

Split it into sub-routines, in order to make it easier to be
understood, and to allow gcc to better parse it.

As a bonus, it gets rid of a goto in the middle of a routine.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The dvb_net code has a really complex function, meant to handle
DVB network packages: it is long, has several loops and ifs
inside, and even cause warnings with gcc5.

Prepare it to be split into smaller functions by storing all
arguments and internal vars inside a struct.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Reuse existing functionality from memdup_user() instead of keeping
duplicate source code.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Those formats are implemented by The DFK 23UP1300, DFK 23UX249 and
DFK 23UX250 USB 3.0 industrial cameras from The Imaging Source.
Signed-off-by: Edgar Thier <info@edgarthier.net>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The documentation simply mentioned that one of the four pixel orders was
used in the example. Now specify the exact pixelformat instead.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The formats have been added without a description, fix that.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The formats added by this patch are:

	V4L2_PIX_FMT_SBGGR16
	V4L2_PIX_FMT_SGBRG16
	V4L2_PIX_FMT_SGRBG16

V4L2_PIX_FMT_SRGGB16 already existed before the patch. Rework the
documentation to match that of the other sample depths.

Also align the description of V4L2_PIX_FMT_SRGGB16 to match with other
similar formats.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Fix this bug:
	"[BUG] process stuck when closing saa7146 [dvb_ttpci]"

Release queued DMA buffers when ending streaming, so that
videobuf_waiton() doesn't block forever.

As reported, this fixes avoids occasional lockup of process reading from
video device, which manifests in such log:

INFO: task ffmpeg:9864 blocked for more than 120 seconds.
      Tainted: P           O    4.6.7 #3
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
ffmpeg          D ffff880177cc7b00     0  9864      1 0x00000000
 ffff880177cc7b00 0000000000000202 0000000000000202 ffffffff8180b4c0
 ffff88019d79e4c0 ffffffff81064050 ffff880177cc7ae0 ffff880177cc8000
 ffff880177cc7b18 ffff8801fd41d648 ffff8802307acca0 ffff8802307acc70
Call Trace:
 [<ffffffff81064050>] ? preempt_count_add+0x89/0xab
 [<ffffffff81477215>] schedule+0x86/0x9e
 [<ffffffff81477215>] ? schedule+0x86/0x9e
 [<ffffffffa0fe1c96>] videobuf_waiton+0x131/0x15e [videobuf_core]
 [<ffffffff8107727b>] ? wait_woken+0x6d/0x6d
 [<ffffffffa1017be9>] saa7146_dma_free+0x39/0x5b [saa7146_vv]
 [<ffffffffa10186c4>] buffer_release+0x2a/0x3e [saa7146_vv]
 [<ffffffffa0fee4a8>] videobuf_vm_close+0xd8/0x103 [videobuf_dma_sg]
 [<ffffffff8112049e>] remove_vma+0x25/0x4d
 [<ffffffff81121a32>] exit_mmap+0xce/0xf7
 [<ffffffff8104381d>] mmput+0x4e/0xe2
 [<ffffffff810491fd>] do_exit+0x372/0x920
 [<ffffffff81049813>] do_group_exit+0x3c/0x98
 [<ffffffff810522ef>] get_signal+0x4e8/0x56e
 [<ffffffff810710a5>] ? task_dead_fair+0xd/0xf
 [<ffffffff81017020>] do_signal+0x23/0x521
 [<ffffffff81479e82>] ? _raw_spin_unlock_irqrestore+0x13/0x25
 [<ffffffff8109710d>] ? hrtimer_try_to_cancel+0xd7/0x104
 [<ffffffff8109b306>] ? ktime_get+0x4c/0xa1
 [<ffffffff81096ea6>] ? update_rmtp+0x46/0x5b
 [<ffffffff81097ce0>] ? hrtimer_nanosleep+0xe4/0x10e
 [<ffffffff81096e3c>] ? hrtimer_init+0xeb/0xeb
 [<ffffffff810014f8>] exit_to_usermode_loop+0x4f/0x93
 [<ffffffff810019fe>] syscall_return_slowpath+0x3b/0x46
 [<ffffffff8147a355>] entry_SYSCALL_64_fastpath+0x8d/0x8f
Reported-by: Philipp Matthias Hahn <pmhahn+video@pmhahn.de>
Tested-by: Philipp Matthias Hahn <pmhahn+video@pmhahn.de>
Signed-off-by: Andrey Utkin <andrey_utkin@fastmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Fix a typo on a word inside it.
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

We should unlock before returning this error code in vpfe_reqbufs().

Fixes: 622897da ("[media] davinci: vpfe: add v4l2 video driver support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

This is a patch to the vpfe_video.c file that fixes an indentation
warning reported by checkpatch.pl
Signed-off-by: Leo Sperling <leosperling97@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

When building with "make W=1", we get multiple harmless build warnings
for the vpfe driver:

drivers/staging/media/davinci_vpfe/dm365_resizer.c:241:1: error: 'static' is not at beginning of declaration [-Werror=old-style-declaration]
drivers/staging/media/davinci_vpfe/dm365_resizer.c: In function 'resizer_set_defualt_configuration':
drivers/staging/media/davinci_vpfe/dm365_resizer.c:831:16: error: initialized field overwritten [-Werror=override-init]
drivers/staging/media/davinci_vpfe/dm365_resizer.c:831:16: note: (near initialization for 'rsz_default_config.rsz_rsc_param[0].h_typ_c')
drivers/staging/media/davinci_vpfe/dm365_resizer.c:849:16: error: initialized field overwritten [-Werror=override-init]
drivers/staging/media/davinci_vpfe/dm365_resizer.c:849:16: note: (near initialization for 'rsz_default_config.rsz_rsc_param[1].h_typ_c')

All of them are trivial to fix without changing the behavior of the
driver, as "static const" is interpreted the same as "const static",
and VPFE_RSZ_INTP_CUBIC is defined as zero, so the initializations
are not really needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

It has never been possible to actually build this driver as
a loadable module, only built-in because the Makefile attempts
to build each file into its own module and fails:

ERROR: "mbus_to_pix" [drivers/staging/media/davinci_vpfe/vpfe_video.ko] undefined!
ERROR: "vpfe_resizer_register_entities" [drivers/staging/media/davinci_vpfe/vpfe_mc_capture.ko] undefined!
ERROR: "rsz_enable" [drivers/staging/media/davinci_vpfe/dm365_resizer.ko] undefined!
ERROR: "config_ipipe_hw" [drivers/staging/media/davinci_vpfe/dm365_ipipe.ko] undefined!
ERROR: "ipipe_set_lutdpc_regs" [drivers/staging/media/davinci_vpfe/dm365_ipipe.ko] undefined!

It took a long time to catch this bug with randconfig builds
because at least 14 other Kconfig symbols have to be enabled in
order to configure this one, and it was clearly only ever tested
as built-in with mainline kernels, if at all.

The solution is really easy: this patch changes the Makefile to
link all files into one module. As discussed previously, the
driver has never before used successfully as a loadable module,
but there is no reason to prevent that configuration.

Link: http://lkml.iu.edu/hypermail/linux/kernel/1512.1/02383.htmlSigned-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Fix spelling error on a comment, change 'wether' to 'whether'
Signed-off-by: Manuel Rodriguez <manuel2982@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Fix spelling mistakes which referred to OUTPUT as OUPUT.
Signed-off-by: Saatvik Arya <aryasaatvik@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

This function just submits the urb much like mceusb_dev_resume; removing
it simplifies mce_request_packet.

Also add missing usb_kill_urb to mce_dev_probe.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>