- 06 Jul, 2016 3 commits
-
-
Xinliang Liu authored
In the bootloader of HiKey/96boards, syspll and media_syspll clk was initialized to 1.19GHz. So, here changes it in kernel accordingly. 1.19GHz was chosen over 1.2GHz because at 1.19GHz we get more precise HDMI pixel clock (1.19G/16 = 74.4MHz) for 1280x720p@60Hz HDMI (74.25MHz required by standards). Closer pixel clock means better compatibility to HDMI monitors. Signed-off-by:
Guodong Xu <guodong.xu@linaro.org> Signed-off-by:
Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1467189955-21694-1-git-send-email-guodong.xu@linaro.org
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/clk/meson/Kconfig:config COMMON_CLK_GXBB drivers/clk/meson/Kconfig: bool ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE and ALIAS are no-op for non-modules. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: linux-clk@vger.kernel.org Cc: linux-amlogic@lists.infradead.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/clk/meson/Kconfig:config COMMON_CLK_MESON8B drivers/clk/meson/Kconfig: bool ...meaning that it currently is not being built as a module by anyone. However a recent commit added a bunch of modular boilerplate to this driver. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. Also note that MODULE DEVICE_TABLE/ALIAS are no-op when non-modular. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: linux-clk@vger.kernel.org Cc: linux-amlogic@lists.infradead.org Signed-off-by:
-
- 02 Jul, 2016 12 commits
-
-
Linus Walleij authored
This adds the EBI2 2X and EBI2 clocks to the MSM8660/APQ8060 GCC. This is necessary to enable clocking of the external bus interface so that peripherals on it can be mounted. These two clocks are simple gated branch clocks. In the vendor tree clock-8x60, these clocks have some kind of dependency, the EBI2 clock has .depends = &ebi2_2x_clk.c, what this means is undocumented, it doesn't seem like there is a parent/child relationship, so the solution I chose was to just have the EBI2 driver get and enable both clocks. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Dong Aisheng authored
Formerly clk core does not support imx7d clock type well that all its clock operations requires the parent clock on. Therefore we enabled all clocks by default in clock driver initialization for other module clocks operate well. After patch 'clk: imx7d: using api with flag CLK_OPS_PARENT_ENABLE', clk core can handle such clock type well, so we don't have to enable them all by default anymore. Instead, we only enable a minimum required set of clocks. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by:
-
Dong Aisheng authored
i.MX7D requires all clocks operations including enable/disable, rate change and re-parent with its parent clock on. Changing to the correct APIs to tell clk core such requirement. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Dong Aisheng authored
IMX SoCs like i.MX7D requires using CLK_OPS_PARENT_ENABLE flags, adding the corresponding clock APIs variants for easily to use. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Dong Aisheng authored
Re-order and concentrate the same type of clk api for better code maintenance. Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Dong Aisheng authored
On Freescale i.MX7D platform, all clocks operations, including enable/disable, rate change and re-parent, requires its parent clock on. Current clock core can not support it well. This patch adding flag CLK_OPS_PARENT_ENABLE to handle this special case in clock core that enable its parent clock firstly for each operation and disable it later after operation complete. The patch part 2 fixes set clock rate and set parent while its parent is off. The most special case is for set_parent() operation which requires all parents including both old and new one to be enabled at the same time during the operation. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Dong Aisheng authored
On Freescale i.MX7D platform, all clocks operations, including enable/disable, rate change and re-parent, requires its parent clock enable. Current clock core can not support it well. This patch introduce a new flag CLK_OPS_PARENT_ENABLE to handle this special case in clock core that enable its parent clock firstly for each operation and disable it later after operation complete. The patch part 1 fixes the possible disabling clocks while its parent is off during kernel booting phase in clk_disable_unused_subtree(). Before the completion of kernel booting, clock tree is still not built completely, there may be a case that the child clock is on but its parent is off which could be caused by either HW initial reset state or bootloader initialization. Taking bootloader as an example, we may enable all clocks in HW by default. And during kernel booting time, the parent clock could be disabled in its driver probe due to calling clk_prepare_enable and clk_disable_unprepare. Because it's child clock is only enabled in HW while its SW usecount in clock tree is still 0, so clk_disable of parent clock will gate the parent clock in both HW and SW usecount ultimately. Then there will be a child clock is still on in HW but its parent is already off. Later in clk_disable_unused(), this clock disable accessing while its parent off will cause system hang due to the limitation of HW which must require its parent on. This patch simply enables the parent clock first before disabling if flag CLK_OPS_PARENT_ENABLE is set in clk_disable_unused_subtree(). This is a simple solution and only affects booting time. After kernel booting up the clock tree is already created, there will be no case that child is off but its parent is off. So no need do this checking for normal clk_disable() later. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Dong Aisheng authored
No function level change, just moving code place. clk_disable_unused function will need to call clk_core_prepare_enable/ clk_core_disable_unprepare when adding CLK_OPS_PARENT_ENABLE features. So move it after clk_core_disable_unprepare to avoid adding forward declared functions later. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Dong Aisheng authored
This can be useful when clock core wants to enable/disable clocks. Then we don't have to convert the struct clk_core to struct clk to call clk_enable/clk_disable which is a bit un-align with exist using. And after introduce clk_core_{enable|disable}_lock, we can refine clk_enable and clk_disable a bit. As well as clk_core_{enable|disable}_lock, we also added clk_core_{prepare|unprepare}_lock and clk_core_prepare_enable/ clk_core_unprepare_disable for clock core to easily use. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: -
Stephen Boyd authored
Merge tag 'v4.8-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next Pull rockchip clk driver updates from Heiko Stuebner: Placeholder for the rk3399 watchdog pclk, some newly exported rk3228 clockids and a small fix for the not yet used spdif to displayport clock on the rk3399. * tag 'v4.8-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: fix incorrect rk3399 spdif-DPTX divider bits clk: rockchip: export rk3228 MAC clocks clk: rockchip: rename rk3228 sclk_macphy_50m to sclk_mac_extclk clk: rockchip: export rk3228 audio clocks clk: rockchip: include rk3228 downstream muxes into fractional dividers clk: rockchip: fix incorrect rk3228 clock registers clk: rockchip: add clock-ids for rk3228 MAC clocks clk: rockchip: add clock-ids for rk3228 audio clocks clk: rockchip: add a dummy clock for the watchdog pclk on rk3399
-
Stephen Boyd authored
Merge tag 'tegra-for-4.8-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next Pull tegra clk driver updates from Thierry Reding: Fixes and enhancements mostly for Tegra210 clocks that allow DSI and HDMI to work on Tegra X1. There's also a refactoring, including fixes, the USB PLL. * tag 'tegra-for-4.8-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: clk: tegra: Initialize UTMI PLL when enabling PLLU clk: tegra: Micro-optimize Tegra210 clock setup clk: tegra: Make sor_safe the parent of dpaux and dpaux1 clk: tegra: Mark timer clock as critical clk: tegra: Enable sor1 and sor1_src on Tegra210 clk: tegra: Squash sor1 safe/brick/src into a single mux clk: tegra: Disable spread spectrum on pll_d2 clk: tegra: Fixup post dividers on Tegra210
-
Maxime Ripard authored
The only way for a fixed factor clock to change its rate would be to change its parent rate. Since passing blindly CLK_SET_RATE_PARENT might break a lot of platforms that were relying on the fact that the parent rate wouldn't change, introduce a compatible-based whitelist that will allow clocks to opt-in that flag. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 30 Jun, 2016 25 commits
-
-
Xing Zheng authored
The CLKSEL_CON32 bit_0 is controlled for spdif_8ch, not spdif_rec_dptx, it should be bit_8, let's fix it. Fixes: 11551005 ("clk: rockchip: add clock controller for the RK3399") Reported-by:
Chris Zhong <zyw@rock-chips.com> Tested-by:
Xing Zheng <zhengxing@rock-chips.com> Cc: stable@vger.kernel.org Signed-off-by:
Heiko Stuebner <heiko@sntech.de>
-
Xing Zheng authored
This patch exports related MAC clocks for dts reference. Signed-off-by:
-
Xing Zheng authored
The sclk_macphy_50m is confusing, the sclk_mac_extclk describes a external clock clearly. Signed-off-by:
-
Xing Zheng authored
This patch exports related i2s/spdif clocks for dts reference. Signed-off-by:
-
Heiko Stuebner authored
-
Xing Zheng authored
During the initial conversion to the newly introduced combined fractional dividers+muxes the rk3228 clocks were left out, so convert them now. Signed-off-by:
-
Stephen Boyd authored
Merge tag 'imx-clk-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-next Pull i.MX clk driver updates from Shawn Guo: - A few correction and improvements on pllv3 driver around AV pll clock rate calculation, parent setting and power bit handling - Correct i.MX6UL GPT2 clock names - A couple of minor fixes on i.MX7D clock driver on DRAM clocks * tag 'imx-clk-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: clk: imx6ul: fix gpt2 clock names clk: imx: refine the powerdown bit of clk-pllv3 clk: imx: clk-pllv3: fix incorrect handle of enet powerdown bit clk: imx: fix pll clock parents clk: imx7d: correct dram pll type clk: imx7d: correct dram root clk parent select clk: imx: correct AV PLL rate formula
-
Stephen Boyd authored
* clk-hw-unregister-fixed-rate: clk: fixed-rate: add clk_hw_unregister_fixed_rate()
-
Masahiro Yamada authored
This will be used to migrate to the clk_hw APIs. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Jiancheng Xue authored
1. Add driver remove path. 2. Fix some issues. -Fix the ordering issue about clock provider being published. -Add error checking upon registering clocks. Signed-off-by:
Jiancheng Xue <xuejiancheng@hisilicon.com> Signed-off-by:
-
Jiancheng Xue authored
Add hisi_clk_unregister_* functions. Signed-off-by:
-
Jiancheng Xue authored
Add error processing for hisi_clk_register_* functions. Signed-off-by:
-
Jiancheng Xue authored
Before, there was an ordering issue that the clock provider had been published in hisi_clk_init before it could provide valid clocks to consumers. hisi_clk_alloc is just used to allocate memory space for struct hisi_clock_data. It makes it possible to publish the provider after the clocks are ready. Signed-off-by:
-
Jiancheng Xue authored
Change the input arguments type to struct platform_device pointer. Signed-off-by:
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Acked-by:
Andi Shyti <andi.shyti@samsung.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Jon Mason <jonmason@broadcom.com> Cc: Simran Rai <ssimran@broadcom.com> Signed-off-by:
Ray Jui <rjui@broadcom.com> Signed-off-by:
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Signed-off-by:
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Signed-off-by:
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers in this driver, allowing us to move closer to a clear split of consumer and provider clk APIs. Signed-off-by:
-
Stephen Boyd authored
* clk-st-critical: clk: st: clkgen-pll: Detect critical clocks clk: st: clkgen-fsyn: Detect critical clocks clk: st: clk-flexgen: Detect critical clocks
-
Lee Jones authored
Utilise the new Critical Clock infrastructure to mark clocks which much not be disabled as CRITICAL. Clocks are marked as CRITICAL using clk flags. This patch also ensures flags are peculated through the framework in the correct manner. Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Lee Jones authored
Utilise the new Critical Clock infrastructure to mark clocks which much not be disabled as CRITICAL. Clocks are marked as CRITICAL using clk flags. This patch also ensures flags are peculated through the framework in the correct manner. Signed-off-by:
-
Lee Jones authored
Utilise the new Critical Clock infrastructure to mark clocks which much not be disabled as CRITICAL. While we're at it, reduce the coverage of the flex_flags variable, since it's only really used in a single for() loop. Signed-off-by:
-
Stephen Boyd authored
* clk-hi6220-rtc: clk: hi6220: Add RTC clock for pl031
-
