- 03 Apr, 2019 1 commit
-
-
Anson Huang authored
Add i.MX8QXP system controller watchdog support. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 29 Mar, 2019 1 commit
-
-
Fabio Estevam authored
thermal-zones node does not have any register properties and thus shouldn't be placed inside the bus. Move thermal-zones node from soc node to root node in order to fix the following build warning with W=1: arch/arm64/boot/dts/freescale/imx8mq.dtsi:305.18-364.6: Warning (simple_bus_reg): /soc@0/bus@30000000/thermal-zones: missing or empty reg/ranges property Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 26 Mar, 2019 2 commits
-
-
Jacky Bai authored
Add basic dts support for i.MM8MM LPDDR4 EVK. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Jacky Bai authored
The i.MX8M Mini is new SOC of the i.MX8M family. it is focused on delivering the latest and greatest video and audio experience combining state-of-the-art media-specific features with high-performance processing while optimized for lowest power consumption. The i.MX 8M Mini Media Applications Processor is 14nm FinFET product of the growing i.MX8M family targeting the consumer & industrial market. It is built in 14LPP to achieve both high performance and low power consumption and relies on a powerful fully coherent core complex based on a quad Cortex-A53 cluster with video and graphics accelerators This patch adds the basic dtsi support for i.MX8MM. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 22 Mar, 2019 4 commits
-
-
Fabio Estevam authored
Move opp-table node from soc node to root node. opp-table node does not have any register properties and thus shouldn't be placed inside the bus. This fixes the following build warnings with W=1: arch/arm64/boot/dts/freescale/imx8mq.dtsi:687.28-703.5: Warning (simple_bus_reg): /soc@0/opp-table: missing or empty reg/ranges property Fixes: 64d26f8c ("arm64: dts: imx8mq: Add the opp table and cores opp properties") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Horia Geantă authored
crypto node alias is needed by U-boot to identify the node and perform fix-ups, like adding "fsl,sec-era" property or deleting a job ring child node (in case ARM TF-A is running). Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Frieder Schrempf authored
After switching to the new FSL QSPI driver the properties 'fsl,qspi-has-second-chip' and 'big-endian' are not used anymore. The driver now uses the 'reg' property to determine the bus and the chipselect. The endianness is selected by the driver depending on which SoC is used. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Angus Ainslie (Purism) authored
Add the imx8mq TMU (Thermal management unit) nodes for CPU, GPU, and VPU. Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 21 Mar, 2019 2 commits
-
-
Peng Fan authored
Add lsio_mu2 node which could be used communicate with SCU. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Peng Fan authored
Currently lsio_mu1 is used by Linux Kernel with mbox-cells as 2, but actually mu0-4 could be used to communicate with SCU. So fix the mbox-cells. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Fixes: 3d91ba65 ("arm64: dts: imx: add imx8qxp support") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 20 Mar, 2019 5 commits
-
-
Manivannan Sadhasivam authored
Enable PCI-E controller for Oxalis board based on NXP/Freescale LS1012a SoC available as the Mini PCI-E connector on the bottom side. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Alison Wang authored
This patch adds pmu dt nodes for LS1028A. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Daniel Baluta authored
The main Audio DAC used on the EVK board is wm8524 The EVK provides the MCLK to wm8524. Digital interface is SAI2 which includes three signals: SYNC_CLK, BCLK and DACDAT. This patch sets: * SAI2 pinctrl configuration * clock hierarchy * wm8524 codec Then uses simple-card machine driver to connect them into a sound card. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Daniel Baluta authored
SAI2 is part of AIPS-3 memory region. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Daniel Baluta authored
SDMA1 is part of AIPS-3 region and SDMA2 is part of AIPS-1 region. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 19 Mar, 2019 7 commits
-
-
Anson Huang authored
i.MX8MQ has clock gate for each GPIO bank, add clock info to GPIO node for clock management. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Abel Vesa authored
Add the 0.8GHz and 1GHz opps. According to the datasheet: https://www.nxp.com/docs/en/data-sheet/IMX8MDQLQIEC.pdf section 3.1.3 Operating ranges. The 0.8GHz opp runs in nominal mode with the regulator set to 0.9V. The 1GHz runs in overdrive mode with the regulator set to 1V. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Abel Vesa authored
According to the schematics, this is a MP2147 switch converter which is controlled by GPIO1_IO13. When set the gpio is set to high the regulator output is set to 0.9V. When the gpio is set to low the regulator output is set to 1V. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Abel Vesa authored
The clocks and their latencies will be used by cpufreq-dt. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Alison Wang authored
This patch adds Audio DT nodes for LS1028ARDB and LS1028AQDS boards. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Carlo Caione authored
Add the node for the OTP controller. Signed-off-by: Carlo Caione <ccaione@baylibre.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Anson Huang authored
Add i.MX8QXP CPU opp table to support cpufreq. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 17 Mar, 2019 14 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - add more Build-Depends to Debian source package - prefix header search paths with $(srctree)/ - make modpost show verbose section mismatch warnings - avoid hard-coded CROSS_COMPILE for h8300 - fix regression for Debian make-kpkg command - add semantic patch to detect missing put_device() - fix some warnings of 'make deb-pkg' - optimize NOSTDINC_FLAGS evaluation - add warnings about redundant generic-y - clean up Makefiles and scripts * tag 'kbuild-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: remove stale lxdialog/.gitignore kbuild: force all architectures except um to include mandatory-y kbuild: warn redundant generic-y Revert "modsign: Abort modules_install when signing fails" kbuild: Make NOSTDINC_FLAGS a simply expanded variable kbuild: deb-pkg: avoid implicit effects coccinelle: semantic code search for missing put_device() kbuild: pkg: grep include/config/auto.conf instead of $KCONFIG_CONFIG kbuild: deb-pkg: introduce is_enabled and if_enabled_echo to builddeb kbuild: deb-pkg: add CONFIG_ prefix to kernel config options kbuild: add workaround for Debian make-kpkg kbuild: source include/config/auto.conf instead of ${KCONFIG_CONFIG} unicore32: simplify linker script generation for decompressor h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux- kbuild: move archive command to scripts/Makefile.lib modpost: always show verbose warning for section mismatch ia64: prefix header search path with $(srctree)/ libfdt: prefix header search paths with $(srctree)/ deb-pkg: generate correct build dependencies
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 asm updates from Thomas Gleixner: "Two cleanup patches removing dead conditionals and unused code" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm: Remove unused __constant_c_x_memset() macro and inlines x86/asm: Remove dead __GNUC__ conditionals
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "Three fixes for the fallout from the TSX errata workaround: - Prevent memory corruption caused by a unchecked out of bound array index. - Two trivial fixes to address compiler warnings" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Make dev_attr_allow_tsx_force_abort static perf/x86: Fixup typo in stub functions perf/x86/intel: Fix memory corruption
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fix from Juergen Gross: "A fix for a Xen bug introduced by David's series for excluding ballooned pages in vmcores" * tag 'for-linus-5.1b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: Fix mapping PG_offline pages to user space
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p updates from Dominique Martinet: "Here is a 9p update for 5.1; there honestly hasn't been much. Two fixes (leak on invalid mount argument and possible deadlock on i_size update on 32bit smp) and a fall-through warning cleanup" * tag '9p-for-5.1' of git://github.com/martinetd/linux: 9p/net: fix memory leak in p9_client_create 9p: use inode->i_lock to protect i_size_write() under 32-bit 9p: mark expected switch fall-through
-
kbuild test robot authored
Fixes: 400816f6 ("perf/x86/intel: Implement support for TSX Force Abort") Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: kbuild-all@01.org Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190313184243.GA10820@lkp-sb-ep06
-
Masahiro Yamada authored
When this .gitignore was added, lxdialog was an independent hostprogs-y. Now that all objects in lxdialog/ are directly linked to mconf, the lxdialog is no longer generated. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes the common Kbuild.asm file. Factor out the duplicated include directives to scripts/Makefile.asm-generic so that no architecture would opt out of the mandatory-y mechanism. um is not forced to include mandatory-y since it is a very exceptional case which does not support UAPI. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
The generic-y is redundant under the following condition: - arch has its own implementation - the same header is added to generated-y - the same header is added to mandatory-y If a redundant generic-y is found, the warning like follows is displayed: scripts/Makefile.asm-generic:20: redundant generic-y found in arch/arm/include/asm/Kbuild: timex.h I fixed up arch Kbuild files found by this. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
-
Douglas Anderson authored
This reverts commit caf6fe91. The commit was fine but is no longer needed as of commit 3a2429e1 ("kbuild: change if_changed_rule for multi-line recipe"). Let's go back to using ";" to be consistent. For some discussion, see: https://lkml.kernel.org/r/CAK7LNASde0Q9S5GKeQiWhArfER4S4wL1=R_FW8q0++_X3T5=hQ@mail.gmail.comSigned-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
-
Douglas Anderson authored
During a simple no-op (nothing changed) build I saw 39 invocations of the C compiler with the argument "-print-file-name=include". We don't need to call the C compiler 39 times for this--one time will suffice. Let's change NOSTDINC_FLAGS to a simply expanded variable to avoid this since there doesn't appear to be any reason it should be recursively expanded. On my build this shaved ~400 ms off my "no-op" build. Note that the recursive expansion seems to date back to the (really old) commit e8f5bdb0 ("[PATCH] Makefile include path ordering"). It's a little unclear to me if the point of that patch was to switch the variable to be recursively expanded (which it did) or to avoid directly assigning to NOSTDINC_FLAGS (AKA to switch to +=) because someone else (out of tree?) was setting it. I presume later since if the only goal was to switch to recursive expansion the patch would have just removed the ":". Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
-
Arseny Maslennikov authored
* The man page for dpkg-source(1) notes: > -b, --build directory [format-specific-parameters] > Build a source package (--build since dpkg 1.17.14). > <...> > > dpkg-source will build the source package with the first > format found in this ordered list: the format indicated > with the --format command line option, the format > indicated in debian/source/format, “1.0”. The fallback > to “1.0” is deprecated and will be removed at some point > in the future, you should always document the desired > source format in debian/source/format. See section > SOURCE PACKAGE FORMATS for an extensive description of > the various source package formats. Thus it would be more foolproof to explicitly use 1.0 (as we always did) than to rely on dpkg-source's defaults. * In a similar vein, debian/rules is not made executable by mkdebian, and dpkg-source warns about that but still silently fixes the file. Let's be explicit once again. Signed-off-by: Arseny Maslennikov <ar@cs.msu.ru> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
-
Wen Yang authored
The of_find_device_by_node() takes a reference to the underlying device structure, we should release that reference. The implementation of this semantic code search is: In a function, for a local variable returned by calling of_find_device_by_node(), a, if it is released by a function such as put_device()/of_dev_put()/platform_device_put() after the last use, it is considered that there is no reference leak; b, if it is passed back to the caller via dev_get_drvdata()/platform_get_drvdata()/get_device(), etc., the reference will be released in other functions, and the current function also considers that there is no reference leak; c, for the rest of the situation, the current function should release the reference by calling put_device, this code search will report the corresponding error message. By using this semantic code search, we have found some object reference leaks, such as: commit 11907e9d ("ASoC: fsl-asoc-card: fix object reference leaks in fsl_asoc_card_probe") commit a12085d1 ("mtd: rawnand: atmel: fix possible object reference leak") commit 11493f26 ("mtd: rawnand: jz4780: fix possible object reference leak") There are still dozens of reference leaks in the current kernel code. Further, for the case of b, the object returned to other functions may also have a reference leak, we will continue to develop other cocci scripts to further check the reference leak. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Reviewed-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Markus Elfring <Markus.Elfring@web.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
-
- 16 Mar, 2019 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds authored
Pull pidfd system call from Christian Brauner: "This introduces the ability to use file descriptors from /proc/<pid>/ as stable handles on struct pid. Even if a pid is recycled the handle will not change. For a start these fds can be used to send signals to the processes they refer to. With the ability to use /proc/<pid> fds as stable handles on struct pid we can fix a long-standing issue where after a process has exited its pid can be reused by another process. If a caller sends a signal to a reused pid it will end up signaling the wrong process. With this patchset we enable a variety of use cases. One obvious example is that we can now safely delegate an important part of process management - sending signals - to processes other than the parent of a given process by sending file descriptors around via scm rights and not fearing that the given process will have been recycled in the meantime. It also allows for easy testing whether a given process is still alive or not by sending signal 0 to a pidfd which is quite handy. There has been some interest in this feature e.g. from systems management (systemd, glibc) and container managers. I have requested and gotten comments from glibc to make sure that this syscall is suitable for their needs as well. In the future I expect it to take on most other pid-based signal syscalls. But such features are left for the future once they are needed. This has been sitting in linux-next for quite a while and has not caused any issues. It comes with selftests which verify basic functionality and also test that a recycled pid cannot be signaled via a pidfd. Jon has written about a prior version of this patchset. It should cover the basic functionality since not a lot has changed since then: https://lwn.net/Articles/773459/ The commit message for the syscall itself is extensively documenting the syscall, including it's functionality and extensibility" * tag 'pidfd-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: selftests: add tests for pidfd_send_signal() signal: add pidfd_send_signal() syscall
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull device-dax updates from Dan Williams: "New device-dax infrastructure to allow persistent memory and other "reserved" / performance differentiated memories, to be assigned to the core-mm as "System RAM". Some users want to use persistent memory as additional volatile memory. They are willing to cope with potential performance differences, for example between DRAM and 3D Xpoint, and want to use typical Linux memory management apis rather than a userspace memory allocator layered over an mmap() of a dax file. The administration model is to decide how much Persistent Memory (pmem) to use as System RAM, create a device-dax-mode namespace of that size, and then assign it to the core-mm. The rationale for device-dax is that it is a generic memory-mapping driver that can be layered over any "special purpose" memory, not just pmem. On subsequent boots udev rules can be used to restore the memory assignment. One implication of using pmem as RAM is that mlock() no longer keeps data off persistent media. For this reason it is recommended to enable NVDIMM Security (previously merged for 5.0) to encrypt pmem contents at rest. We considered making this recommendation an actively enforced requirement, but in the end decided to leave it as a distribution / administrator policy to allow for emulation and test environments that lack security capable NVDIMMs. Summary: - Replace the /sys/class/dax device model with /sys/bus/dax, and include a compat driver so distributions can opt-in to the new ABI. - Allow for an alternative driver for the device-dax address-range - Introduce the 'kmem' driver to hotplug / assign a device-dax address-range to the core-mm. - Arrange for the device-dax target-node to be onlined so that the newly added memory range can be uniquely referenced by numa apis" NOTE! I'm not entirely happy with the whole "PMEM as RAM" model because we currently have special - and very annoying rules in the kernel about accessing PMEM only with the "MC safe" accessors, because machine checks inside the regular repeat string copy functions can be fatal in some (not described) circumstances. And apparently the PMEM modules can cause that a lot more than regular RAM. The argument is that this happens because PMEM doesn't necessarily get scrubbed at boot like RAM does, but that is planned to be added for the user space tooling. Quoting Dan from another email: "The exposure can be reduced in the volatile-RAM case by scanning for and clearing errors before it is onlined as RAM. The userspace tooling for that can be in place before v5.1-final. There's also runtime notifications of errors via acpi_nfit_uc_error_notify() from background scrubbers on the DIMM devices. With that mechanism the kernel could proactively clear newly discovered poison in the volatile case, but that would be additional development more suitable for v5.2. I understand the concern, and the need to highlight this issue by tapping the brakes on feature development, but I don't see PMEM as RAM making the situation worse when the exposure is also there via DAX in the PMEM case. Volatile-RAM is arguably a safer use case since it's possible to repair pages where the persistent case needs active application coordination" * tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: "Hotplug" persistent memory for use like normal RAM mm/resource: Let walk_system_ram_range() search child resources mm/memory-hotplug: Allow memory resources to be children mm/resource: Move HMM pr_debug() deeper into resource code mm/resource: Return real error codes from walk failures device-dax: Add a 'modalias' attribute to DAX 'bus' devices device-dax: Add a 'target_node' attribute device-dax: Auto-bind device after successful new_id acpi/nfit, device-dax: Identify differentiated memory with a unique numa-node device-dax: Add /sys/class/dax backwards compatibility device-dax: Add support for a dax override driver device-dax: Move resource pinning+mapping into the common driver device-dax: Introduce bus + driver model device-dax: Start defining a dax bus model device-dax: Remove multi-resource infrastructure device-dax: Kill dax_region base device-dax: Kill dax_region ida
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "This is the final round of mostly small fixes and performance improvements to our initial submit. The main regression fix is the ia64 simscsi build failure which was missed in the serial number elimination conversion" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: ia64: simscsi: use request tag instead of serial_number scsi: aacraid: Fix performance issue on logical drives scsi: lpfc: Fix error codes in lpfc_sli4_pci_mem_setup() scsi: libiscsi: Hold back_lock when calling iscsi_complete_task scsi: hisi_sas: Change SERDES_CFG init value to increase reliability of HiLink scsi: hisi_sas: Send HARD RESET to clear the previous affiliation of STP target port scsi: hisi_sas: Set PHY linkrate when disconnected scsi: hisi_sas: print PHY RX errors count for later revision of v3 hw scsi: hisi_sas: Fix a timeout race of driver internal and SMP IO scsi: hisi_sas: Change return variable type in phy_up_v3_hw() scsi: qla2xxx: check for kstrtol() failure scsi: lpfc: fix 32-bit format string warning scsi: lpfc: fix unused variable warning scsi: target: tcmu: Switch to bitmap_zalloc() scsi: libiscsi: fall back to sendmsg for slab pages scsi: qla2xxx: avoid printf format warning scsi: lpfc: resolve static checker warning in lpfc_sli4_hba_unset scsi: lpfc: Correct __lpfc_sli_issue_iocb_s4 lockdep check scsi: ufs: hisi: fix ufs_hba_variant_ops passing scsi: qla2xxx: Fix panic in qla_dfs_tgt_counters_show ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull more block layer changes from Jens Axboe: "This is a collection of both stragglers, and fixes that came in after I finalized the initial pull. This contains: - An MD pull request from Song, with a few minor fixes - Set of NVMe patches via Christoph - Pull request from Konrad, with a few fixes for xen/blkback - pblk fix IO calculation fix (Javier) - Segment calculation fix for pass-through (Ming) - Fallthrough annotation for blkcg (Mathieu)" * tag 'for-5.1/block-post-20190315' of git://git.kernel.dk/linux-block: (25 commits) blkcg: annotate implicit fall through nvme-tcp: support C2HData with SUCCESS flag nvmet: ignore EOPNOTSUPP for discard nvme: add proper write zeroes setup for the multipath device nvme: add proper discard setup for the multipath device nvme: remove nvme_ns_config_oncs nvme: disable Write Zeroes for qemu controllers nvmet-fc: bring Disconnect into compliance with FC-NVME spec nvmet-fc: fix issues with targetport assoc_list list walking nvme-fc: reject reconnect if io queue count is reduced to zero nvme-fc: fix numa_node when dev is null nvme-fc: use nr_phys_segments to determine existence of sgl nvme-loop: init nvmet_ctrl fatal_err_work when allocate nvme: update comment to make the code easier to read nvme: put ns_head ref if namespace fails allocation nvme-trace: fix cdw10 buffer overrun nvme: don't warn on block content change effects nvme: add get-feature to admin cmds tracer md: Fix failed allocation of md_register_thread It's wrong to add len to sector_nr in raid10 reshape twice ...
-