Merge series "Support built-in Mic on Tegra boards that use WM8903" from Dmitry Osipenko <digetx@gmail.com>:

Hello,

This small series adds audio route for built-in microphone on NVIDIA Tegra
boards that use WM8903 CODEC. In particular this is needed in order to unmute
internal microphone on Acer A500 tablet device. I'm planning to send out the
device tree for the A500 for 5.8, so will be nice to get the microphone
sorted out. Please review and apply, thanks in advance.

Dmitry Osipenko (2):
  dt-bindings: sound: tegra-wm8903: Document built-in microphone audio
    source
  ASoC: tegra: tegra_wm8903: Support DAPM events for built-in microphone

 .../sound/nvidia,tegra-audio-wm8903.txt        |  1 +
 sound/soc/tegra/tegra_wm8903.c                 | 18 ++++++++++++++++++
 2 files changed, 19 insertions(+)

--
2.25.1

The patch adds the descriptions for the DMIC clock rate and delay settings.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200323082547.7898-3-oder_chiou@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

The patch adds a property for DMIC delay (ms) to avoid pop noise and
changes the default delay setting.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200323082547.7898-2-oder_chiou@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

The patch adds a property for DMIC clock rate (hz) and changes the
default to the common optimize DMIC clock rate.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200323082547.7898-1-oder_chiou@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

The SPDX-License-Identifier shall not be suffixed with anything further.
This makes ./scripts/spdxcheck.py complain:

  sound/soc/codecs/mt6660.c: 1:36 Invalid token: //

Clean up SPDX-License-Identifier line to make spdxcheck.py happy.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20200321114022.8545-1-lukas.bulwahn@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The internal microphone source is needed in order to be able to describe
the hardware audio routing for devices that have the built-in microphone
in addition to the external Mic Jack.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200320205504.30466-2-digetx@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The enable-GPIO needs to be toggled on a DAPM event in order to turn
microphone ON/OFF, otherwise microphone won't work.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200320205504.30466-3-digetx@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Now CPU/Codec DAIs are alias for dais.
Thus, we can directly use for_each_rtd_dais() macro
for soc_dai_pcm_new().
This patch merge CPU/Codec for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87r1xsolen.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Now we can use for_each_rtd_dais().
Let's use it instead of for_each_rtd_cpu/codec_dais().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87sgi8olet.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Now we can use for_each_rtd_dais().
Let's use it instead of for_each_rtd_cpu/codec_dais().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87tv2ooley.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Now we can use for_each_rtd_dais().
Let's use it instead of for_each_rtd_cpu/codec_dais().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87v9n4olf4.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

ALSA SoC is currently categorizing CPU/Codec DAIs,
and it works well.

But modern devices require more complex connections,
for example Codec to Codec, etc, and future devices will
enable to more complex connections.
Because of these background, CPU/Codec DAIs categorizing is
no longer good much to modern device.

Currently, rtd has both CPU/Codec DAIs pointer.

	rtd->cpu_dais   = [][][][][][][][][]
	rtd->codec_dais = [][][][][][][][][]

This patch merges these into DAIs pointer.

	rtd->dais = [][][][][][][][][][][][][][][][][][]
	            ^cpu_dais         ^codec_dais
	            |--- num_cpus ---|--- num_codecs --|

Then, we can merge for_each_rtd_cpu/codec_dais() from this patch.

-	for_each_rtd_cpu_dais() {
-		...
-	}
-	for_each_rtd_codec_dais() {
-		...
-	}
+	for_each_rtd_dais() {
+		...
+	}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87wo7kolfa.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge branch 'topic/ro_wordlength' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into asoc-5.7

According to SoundWire Specification Version 1.2.
"A Data Port number X (in the range 0-14) which supports only one
value of WordLength may implement the WordLength field in the
DPX_BlockCtrl1 Register as Read-Only, returning the fixed value of
WordLength in response to reads."

As WSA881x interfaces in PDM mode making the only field "WordLength"
in DPX_BlockCtrl1" fixed and read-only. Behaviour of writing to this
register on WSA881x soundwire slave with Qualcomm Soundwire Controller
is throwing up an error. Not sure how other controllers deal with
writing to readonly registers, but this patch provides a way to avoid
writes to DPN_BlockCtrl1 register by providing a read_only_wordlength
flag in struct sdw_dpn_prop
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200311113545.23773-2-srinivas.kandagatla@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

This patchset corrects a rebind issue on STM32 SPDIFRX and I2S drivers.

The same correction has already been applied for SAI driver:
0d6defc7 ("ASoC: stm32: sai: manage rebind issue")

The commit e894efef ("ASoC: core: add support to card rebind")
allows to rebind the sound card after a rebind of one of its component.
With this commit, the sound card is actually rebound,
but may be no more functional.

The following problems have been seen on STM32 drivers.

1) DMA channel is not requested:

With the sound card rebind the simplified call sequence is:
    probe
        snd_soc_register_component
                snd_soc_try_rebind_card
                        snd_soc_instantiate_card
        devm_snd_dmaengine_pcm_register

The problem occurs because the pcm must be registered,
before snd_soc_instantiate_card() is called.

Modify the driver, to change the call sequence as follows:
    probe
        devm_snd_dmaengine_pcm_register
        snd_soc_register_component
                snd_soc_try_rebind_card

2) DMA channel is not released:

dma_release_channel() is not called when
devm_dmaengine_pcm_release() is executed.
This occurs because SND_DMAENGINE_PCM_DRV_NAME component,
has already been released through devm_component_release().

devm_dmaengine_pcm_release() should be called before
devm_component_release() to avoid this problem.

Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component()
explicitly from the driver, to have the right sequence.

Olivier Moysan (3):
  ASoC: stm32: spdifrx: fix regmap status check
  ASoC: stm32: spdifrx: manage rebind issue
  ASoC: stm32: i2s: manage rebind issue

 sound/soc/stm/stm32_i2s.c     | 40 ++++++++++++++++------
 sound/soc/stm/stm32_spdifrx.c | 64 +++++++++++++++++++----------------
 2 files changed, 63 insertions(+), 41 deletions(-)

--
2.17.1

Merge series "ASoC: sdm845: fix soundwire stream handling" from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:

Recent addition of SoundWire stream state-machine checks in linux-next
have shown an existing issue with handling soundwire streams in codec drivers.

In general soundwire stream prepare/enable/disable can be called from either
codec/machine/controller driver. However calling it in codec driver means
that if multiple instances(Left/Right speakers) of the same codec is
connected to the same stream then it will endup calling stream
prepare/enable/disable more than once. This will mess up the stream
state-machine checks in the soundwire core.

Moving this stream handling to machine driver would fix this issue
and also allow board/platform specfic power sequencing.

Changes since v1:
	- removed false error check while setting sruntime.

Srinivas Kandagatla (2):
  ASoC: qcom: sdm845: handle soundwire stream
  ASoC: codecs: wsa881x: remove soundwire stream handling

 sound/soc/codecs/wsa881x.c | 44 +------------------------
 sound/soc/qcom/Kconfig     |  2 +-
 sound/soc/qcom/sdm845.c    | 67 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 69 insertions(+), 44 deletions(-)

--
2.21.0

Some debug messages are too noisy.
This patch removes it.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200317073321.12660-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

In existing setup WSA881x codec handles soundwire stream,
however DB845c and other machines based on SDM845c have 2
instances for WSA881x codec. This will force soundwire stream
to be prepared/enabled twice or multiple times.
Handling SoundWire Stream in machine driver would fix this issue.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317151233.8763-2-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

There could be multiple instances of this codec on any platform,
so handling stream directly in this codec driver can lead to
multiple calls to prepare/enable/disable on the same SoundWire stream.
Move this stream handling to machine driver to fix this issue.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200317151233.8763-3-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The commit e894efef ("ASoC: core: add support to card rebind")
allows to rebind the sound card after a rebind of one of its component.
With this commit, the sound card is actually rebound,
but may be no more functional.

Corrections:
- Call snd_dmaengine_pcm_register() before snd_soc_register_component().
- Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component()
explicitly from I2S driver.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200318144125.9163-4-olivier.moysan@st.comSigned-off-by: Mark Brown <broonie@kernel.org>

The commit e894efef ("ASoC: core: add support to card rebind")
allows to rebind the sound card after a rebind of one of its component.
With this commit, the sound card is actually rebound,
but may be no more functional.

Corrections:
- Call snd_dmaengine_pcm_register() before snd_soc_register_component().
- Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component()
explicitly from SPDFIRX driver.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200318144125.9163-3-olivier.moysan@st.comSigned-off-by: Mark Brown <broonie@kernel.org>

This series adds more WMA profiles and WMA decoder parameters to UAPI and
then support for these in qcom driver. It also adds FLAC and APE IDs and
decoder parameters to UAPI and then support in qcom driver

This was tested on Dragon board RB3.

Last, bump up the compressed version so that userspace can check for the
support.

Since the series touches compress uapi and asoc, it would make sense to go
thru asoc tree with acks.

Changes in v3:
 - add r-b from Srini
 - use macros for FLAC channel layout tags

Changes in v2:
 - use bitflags for wma profiles

Vinod Koul (9):
  ALSA: compress: add wma codec profiles
  ALSA: compress: Add wma decoder params
  ASoC: qcom: q6asm: pass codec profile to q6asm_open_write
  ASoC: qcom: q6asm: add support to wma config
  ASoC: qcom: q6asm-dai: add support to wma decoder
  ALSA: compress: add alac & ape decoder params
  ASoC: qcom: q6asm: add support for alac and ape configs
  ASoC: qcom: q6asm-dai: add support for ALAC and APE decoders
  ALSA: compress: bump the version

 include/uapi/sound/compress_offload.h |   2 +-
 include/uapi/sound/compress_params.h  |  37 +++-
 sound/soc/qcom/qdsp6/q6asm-dai.c      | 139 ++++++++++++++-
 sound/soc/qcom/qdsp6/q6asm.c          | 243 +++++++++++++++++++++++++-
 sound/soc/qcom/qdsp6/q6asm.h          |  51 +++++-
 5 files changed, 465 insertions(+), 7 deletions(-)

--
2.24.1

snd_soc_dai_get_sdw_stream() returns null if dai does not support
this callback, this is no very useful for the caller to
differentiate if this is an error or unsupported call for the dai.

return -ENOTSUPP in cases where this callback is not supported.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200316151110.2580-1-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

We have added support for bunch of new decoders and parameters for
decoders. To help users find the support bump the version up to 0,2,0.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-10-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Qualcomm DSPs also supports the ALAC and APE decoders, so add support
for these and convert the snd_codec_params to qdsp format.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-9-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Qualcomm DSPs expect ALAC and APE configs to be send for decoders,
so add the API to program the respective config to the DSP.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-8-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add ALAC (Apple Lossless Audio Codec) and APE (Monkey's Lossless Audio
Codec) defines and parameters required to configure these.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-7-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Qualcomm DSPs also supports the wma decoder, so add support for wma
decoder and convert the snd_codec_params to qdsp format.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-6-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Qualcomm DSPs expect wma v9 and wma v10 configs to be set for wma
decoders, so add the API to program the respective wma config to the DSP
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-5-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Codec profile is required to be passed for WMA codecs so that we know
the codec profile present and tell DSP accordingly, so update this API
to pass the codec profile as argument
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-4-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Some WMA decoders like WMAv10 etc need some additional encoder option
parameters, so add these as WMA decoder params.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-3-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Some codec profiles were missing for WMA, like WMA9/10 lossless and
wma10 pro, so add these profiles
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-2-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge branch 'for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.7

Maxim MAX98360A audio amplifier is functionally identical to MAX98357A,
add ACPI ID "MAX98360A" for driver reuse.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Link: https://lore.kernel.org/r/1584114926-29287-1-git-send-email-yong.zhi@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: SOF: multi-cpu dais, IPC and Intel improvements for 5.7" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

Corrections for compatibility with the multi-cpu dai check for
min-channels, IPC simplifications, and removal of unnecessary
boot-related code for Intel platforms.

Amery Song (2):
  ASoC: SOF: Intel: hda: remove unnecessary ROM IPC filter function
  ASoC: SOF: Intel: remove unnecessary waitq before loading firmware

Bard Liao (2):
  ASoC: SOF: Intel: hda-dai: add stream capability
  ASoC: SOF: topology: connect dai widget to all cpu-dais

Karol Trzcinski (2):
  ASoC: SOF: Make sof_ipc_ext_data enum more rigid
  ASoC: SOF: Remove SOF_IPC_EXT_DMA_BUFFER

 include/sound/sof/info.h         | 22 +-------
 sound/soc/sof/intel/cnl.c        |  5 --
 sound/soc/sof/intel/hda-dai.c    | 96 ++++++++++++++++++++++++++++++++
 sound/soc/sof/intel/hda-ipc.c    | 20 +------
 sound/soc/sof/intel/hda-loader.c |  3 -
 sound/soc/sof/intel/hda.c        |  3 -
 sound/soc/sof/intel/hda.h        |  1 -
 sound/soc/sof/loader.c           |  6 --
 sound/soc/sof/sof-priv.h         |  5 --
 sound/soc/sof/topology.c         |  8 ++-
 10 files changed, 108 insertions(+), 61 deletions(-)

base-commit: 101247a3
--
2.20.1

Merge series "ASoC: Intel: machine driver updates for 5.7" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

Fix HDaudio/HDMI Kconfig dependencies, cleanup code, and add support
for 2 new configs (DA7219+Maxim 98360A and RT5692+RT1015)

Note that the last patch is the first case where we added the
Reviewed-by tags automagically from the list of GitHub
approvers. Feedback/comments welcome on the format, and thanks to
Ranjani for the nice script!

Changes since v1:
Change base to broonie/for-5.7
Rebase and fix for_each_codec_dais() macro in Patch 9.
Add new patch to remove GFP_ATOMIC

Guennadi Liakhovetski (3):
  ASoC: codecs: hdac_hdmi: (cosmetic) remove redundant variable
    initialisations
  ASoC: Intel: skylake: (cosmetic) remove redundant variable
    initialisations
  ASoC: Intel: (cosmetic) simplify structure member access

Kai Vehmanen (4):
  ASoC: Intel: boards: drop reverse deps for SND_HDA_CODEC_HDMI
  ASoC: Intel: sof_pcm512x: drop reverse deps for SND_HDA_CODEC_HDMI
  ASoC: Intel: sof_pcm512x: make HDMI optional for all platforms
  ASoC: SOF: Intel: hda: remove SND_SOC_SOF_HDA_COMMON_HDMI_CODEC

Pierre-Louis Bossart (1):
  ASoC: Intel: don't use GFP_ATOMIC for machine driver contexts

Yong Zhi (2):
  ASoC: Intel: sof_da7219_max98373: Add support for max98360a speaker
    amp
  ASoC: Intel: sof_rt5682: Add rt1015 speaker amp support

 sound/soc/codecs/hdac_hdmi.c                  |   6 +-
 sound/soc/intel/boards/Kconfig                |  20 ++--
 sound/soc/intel/boards/bdw-rt5650.c           |   2 +-
 sound/soc/intel/boards/bdw-rt5677.c           |   2 +-
 sound/soc/intel/boards/broadwell.c            |   2 +-
 sound/soc/intel/boards/bxt_da7219_max98357a.c |   2 +-
 sound/soc/intel/boards/bxt_rt298.c            |   2 +-
 sound/soc/intel/boards/bytcht_da7213.c        |   2 +-
 sound/soc/intel/boards/cht_bsw_max98090_ti.c  |   2 +-
 sound/soc/intel/boards/cht_bsw_nau8824.c      |   2 +-
 sound/soc/intel/boards/cht_bsw_rt5645.c       |   2 +-
 sound/soc/intel/boards/cml_rt1011_rt5682.c    |   4 +-
 sound/soc/intel/boards/glk_rt5682_max98357a.c |   2 +-
 sound/soc/intel/boards/haswell.c              |   2 +-
 sound/soc/intel/boards/kbl_rt5663_max98927.c  |   2 +-
 .../intel/boards/kbl_rt5663_rt5514_max98927.c |   2 +-
 sound/soc/intel/boards/skl_hda_dsp_generic.c  |   2 +-
 .../soc/intel/boards/skl_nau88l25_max98357a.c |   2 +-
 sound/soc/intel/boards/skl_nau88l25_ssm4567.c |   2 +-
 sound/soc/intel/boards/sof_da7219_max98373.c  |  78 +++++++++++--
 sound/soc/intel/boards/sof_pcm512x.c          |  38 ++++--
 sound/soc/intel/boards/sof_rt5682.c           | 110 +++++++++++++++++-
 .../intel/common/soc-acpi-intel-jsl-match.c   |  34 +++++-
 sound/soc/intel/skylake/skl.c                 |   4 +-
 sound/soc/sof/intel/Kconfig                   |  11 --
 sound/soc/sof/intel/hda.c                     |   3 +-
 26 files changed, 269 insertions(+), 71 deletions(-)

base-commit: 101247a3
--
2.20.1

Merge series "ASoC: brcm: add dsl and pon chip audio driver" from Kevin Li <kevin-ke.li@broadcom.com>:

Changes in v2:
 * Make the comment a C++ one for license header
 * Remove all empty functions
 * Change all variable to use kernel coding style
 * Comment chip TX RX block independently generate I2S bus signals

Kevin Li (2):
  ASoC: brcm:  Add DSL/PON SoC audio driver
  ASoC: brcm:  DSL/PON SoC device tree bindings of audio driver

 .../bindings/sound/brcm,bcm63xx-audio.txt     |  29 ++
 sound/soc/bcm/Kconfig                         |   9 +
 sound/soc/bcm/Makefile                        |   4 +
 sound/soc/bcm/bcm63xx-i2s-whistler.c          | 317 ++++++++++++
 sound/soc/bcm/bcm63xx-i2s.h                   |  90 ++++
 sound/soc/bcm/bcm63xx-pcm-whistler.c          | 485 ++++++++++++++++++
 6 files changed, 934 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt
 create mode 100644 sound/soc/bcm/bcm63xx-i2s-whistler.c
 create mode 100644 sound/soc/bcm/bcm63xx-i2s.h
 create mode 100644 sound/soc/bcm/bcm63xx-pcm-whistler.c

--
2.25.1

The setting is sync with I2C/I2S mode.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200313023850.28875-1-oder_chiou@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Signed-off-by: Kevin Li <kevin-ke.li@broadcom.com>
Link: https://lore.kernel.org/r/20200312223242.2843-1-kevin-ke.li@broadcom.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds Broadcom DSL/PON SoC audio driver
with Whistler I2S block. The SoC supported by this
patch are BCM63158B0,BCM63178 and BCM47622/6755
Signed-off-by: Kevin Li <kevin-ke.li@broadcom.com>
Link: https://lore.kernel.org/r/20200312223242.2843-2-kevin-ke.li@broadcom.comSigned-off-by: Mark Brown <broonie@kernel.org>