- 26 Sep, 2006 31 commits
-
-
Adrian Bunk authored
This patch makes the following needlessly global functions static: - nmi_int.c: profile_exceptions_notify() - nmi_timer_int.c: profile_timer_exceptions_notify() Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andi Kleen <ak@suse.de>
-
Andi Kleen authored
When a unknown NMI happened the panic would claim a NMI watchdog timeout. Also it would check the variable set by nmi_watchdog=panic and panic then. Fix up the panic message to be generic Unconditionally panic on unknown NMI when panic on unknown nmi is enabled. Noticed by Jan Beulich Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de>
-
Shaohua Li authored
Making NMI suspend/resume work with SMP. We use CPU hotplug to offline APs in SMP suspend/resume. Only BSP executes sysdev's .suspend/.resume method. APs should follow CPU hotplug code path. And: +From: Don Zickus <dzickus@redhat.com> Makes the start/stop paths of nmi watchdog more robust to handle the suspend/resume cases more gracefully. AK: I merged the two patches together Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Don Zickus authored
Clean up some of the output messages on the nmi error paths to make more sense when they are displayed. This is mainly a cosmetic fix and shouldn't impact any normal code path. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de>
-
Don Zickus authored
To quote Alan Cox: The default Linux behaviour on an NMI of either memory or unknown is to continue operation. For many environments such as scientific computing it is preferable that the box is taken out and the error dealt with than an uncorrected parity/ECC error get propogated. A small number of systems do generate NMI's for bizarre random reasons such as power management so the default is unchanged. In other respects the new proc/sys entry works like the existing panic controls already in that directory. This is separate to the edac support - EDAC allows supported chipsets to handle ECC errors well, this change allows unsupported cases to at least panic rather than cause problems further down the line. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de>
-
Don Zickus authored
Adds a new /proc/sys/kernel/nmi_watchdog call that will enable/disable the nmi watchdog. By entering a non-zero value here, a user can enable the nmi watchdog to monitor the online cpus in the system. By entering a zero value here, a user can disable the nmi watchdog and free up a performance counter which could then be utilized by the oprofile subsystem, otherwise oprofile may be short a counter when in use. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Don Zickus authored
Adds a new /proc/sys/kernel/nmi call that will enable/disable the nmi watchdog. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de>
-
Don Zickus authored
Removes the un/set_nmi_callback and reserve/release_lapic_nmi functions as they are no longer needed. The various subsystems are modified to register with the die_notifier instead. Also includes compile fixes by Andrew Morton. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de>
-
Andi Kleen authored
Needed TIF_RESTORE_SIGMASK first Signed-off-by: Andi Kleen <ak@suse.de>
-
Andi Kleen authored
We need TIF_RESTORE_SIGMASK in order to support ppoll() and pselect() system calls. This patch originally came from Andi, and was based heavily on David Howells' implementation of same on i386. I fixed a typo which was causing do_signal() to use the wrong signal mask. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andi Kleen <ak@suse.de>
-
Don Zickus authored
This patch cleans up the NMI interrupt path. Instead of being gated by if the 'nmi callback' is set, the interrupt handler now calls everyone who is registered on the die_chain and additionally checks the nmi watchdog, reseting it if enabled. This allows more subsystems to hook into the NMI if they need to (without being block by set_nmi_callback). Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de>
-
Don Zickus authored
This patch includes the changes to make the nmi watchdog on i386 SMP aware. A bunch of code was moved around to make it simpler to read. In addition, it is now possible to determine if a particular NMI was the result of the watchdog or not. This feature allows the kernel to filter out unknown NMIs easier. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de>
-
Don Zickus authored
This patch includes the changes to make the nmi watchdog on x86_64 SMP aware. A bunch of code was moved around to make it simpler to read. In addition, it is now possible to determine if a particular NMI was the result of the watchdog or not. This feature allows the kernel to filter out unknown NMIs easier. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de>
-
Don Zickus authored
Incorporates the new performance counter reservation system in oprofile. Also cleans up a lot of the initialization code. The code original zero'd out every register associated with performance counters regardless if those registers were used or not. This causes issues with the nmi watchdog. Now oprofile tries to reserve registers and gives up if it can't get them. Cc: levon@movementarian.org Cc: oprofile-list@lists.sf.net Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de>
-
Don Zickus authored
Adds basic infrastructure to allow subsystems to reserve performance counters on the x86 chips. Only UP kernels are supported in this patch to make reviewing easier. The SMP portion makes a lot more changes. Think of this as a locking mechanism where each bit represents a different counter. In addition, each subsystem should also reserve an appropriate event selection register that will correspond to the performance counter it will be using (this is mainly neccessary for the Pentium 4 chips as they break the 1:1 relationship to performance counters). This will help prevent subsystems like oprofile from interfering with the nmi watchdog. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de>
-
Andi Kleen authored
This makes merging easier. They are readded a few patches later. Signed-off-by: Andi Kleen <ak@suse.de>
-
Andi Kleen authored
There are some machines around (large xSeries or Unisys ES7000) that need physical IO-APIC destination mode to access all of their IO devices. This currently doesn't work in UP kernels as used in distribution installers. This patch allows to compile even UP kernels as GENERICARCH which allows to use physical or clustered APIC mode. Signed-off-by: Andi Kleen <ak@suse.de>
-
Andi Kleen authored
This is based on the x86-64 defconfig which works on a wide range of systems. Signed-off-by: Andi Kleen <ak@suse.de>
-
Andi Kleen authored
Signed-off-by: Andi Kleen <ak@suse.de>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NetLabel]: update docs with website information [NetLabel]: rework the Netlink attribute handling (part 2) [NetLabel]: rework the Netlink attribute handling (part 1) [Netlink]: add nla_validate_nested() [NETLINK]: add nla_for_each_nested() to the interface list [NetLabel]: change the SELinux permissions [NetLabel]: make the CIPSOv4 cache spinlocks bottom half safe [NetLabel]: correct improper handling of non-NetLabel peer contexts [TCP]: make cubic the default [TCP]: default congestion control menu [ATM] he: Fix __init/__devinit conflict [NETFILTER]: Add dscp,DSCP headers to header-y [DCCP]: Introduce dccp_probe [DCCP]: Use constants for CCIDs [DCCP]: Introduce constants for CCID numbers [DCCP]: Allow default/fallback service code.
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SOUND] sparc/amd7930: Use __devinit and __devinitdata as needed. [SUNLANCE]: Mark sparc_lance_probe_one as __devinit. [SPARC64]: Fix section-mismatch errors in solaris emul module.
-
Jonathan Corbet authored
The v4l2 API documentation for VIDIOC_ENUMSTD says: To enumerate all standards applications shall begin at index zero, incrementing by one until the driver returns EINVAL. The actual code, however, tests the index this way: if (index<=0 || index >= vfd->tvnormsize) { ret=-EINVAL; So any application which passes in index=0 gets EINVAL right off the bat - and, in fact, this is what happens to mplayer. So I think the following patch is called for, and maybe even appropriate for a 2.6.18.x stable release. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ed Swierk authored
Invoking load_module() before param_sysfs_init() is called crashes in mod_sysfs_setup(), since the kset in module_subsys is not initialized yet. In my case, net-pf-1 is getting modprobed as a result of hotplug trying to create a UNIX socket. Calls to hotplug begin after the topology_init initcall. Another patch for the same symptom (module_subsys-initialize-earlier.patch) moves param_sysfs_init() to the subsys initcalls, but this is still not early enough in the boot process in some cases. In particular, topology_init() causes /sbin/hotplug to run, which requests net-pf-1 (the UNIX socket protocol) which can be compiled as a module. Moving param_sysfs_init() to the postcore initcalls fixes this particular race, but there might well be other cases where a usermodehelper causes a module to load earlier still. The patch makes load_module() return an error rather than crashing the kernel if invoked before module_subsys is initialized. Cc: Mark Huang <mlhuang@cs.princeton.edu> Cc: Greg KH <greg@kroah.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
keith mannthey authored
If there is only 1 node in the system cpus should think they are apart of some other node. If cases where a real numa system boots the Flat numa option make sure the cpus don't claim to be apart on a non-existent node. Signed-off-by: Keith Mannthey <kmannth@us.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Andi Kleen <ak@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
KAMEZAWA Hiroyuki authored
Assume that a cpu is *physically* offlined at boot time... Because smpboot.c::smp_boot_cpu_map() canoot find cpu's sapicid, numa.c::build_cpu_to_node_map() cannot build cpu<->node map for offlined cpu. For such cpus, cpu_to_node map should be fixed at cpu-hot-add. This mapping should be done before cpu onlining. This patch also handles cpu hotremove case. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
KAMEZAWA Hiroyuki authored
Problem description: We have additional_cpus= option for allocating possible_cpus. But nid for possible cpus are not fixed at boot time. cpus which is offlined at boot or cpus which is not on SRAT is not tied to its node. This will cause panic at cpu onlining. Usually, pxm_to_nid() mapping is fixed at boot time by SRAT. But, unfortunately, some system (my system!) do not include full SRAT table for possible cpus. (Then, I use additiona_cpus= option.) For such possible cpus, pxm<->nid should be fixed at hot-add. We now have acpi_map_pxm_to_node() which is also used at boot. It's suitable here. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Michael Hanselmann authored
Seems like not all drivers use the framebuffer_alloc() function and won't have an initialized mutex. But those don't have a backlight, anyway. Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Cc: Olaf Hering <olaf@aepfle.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Daniel R Thompson <daniel.thompson@st.com> Cc: Jon Smirl <jonsmirl@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
David Rientjes authored
Stops panic associated with attempting to free a non slab-allocated per_cpu_pageset. Signed-off-by: David Rientjes <rientjes@cs.washington.edu> Acked-by: Christoph Lameter <clameter@sgi.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
keith mannthey authored
With CONFIG_PHYSICAL_START set to a non default values the i386 boot_ioremap code calculated its pte index wrong and users of boot_ioremap have their areas incorrectly mapped (for me SRAT table not mapped during early boot). This patch removes the addr < BOOT_PTE_PTRS constraint. [ Keith says this is applicable to 2.6.16 and 2.6.17 as well ] Signed-off-by: Keith Mannthey<kmannth@us.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: <stable@kernel.org> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Peter Zijlstra authored
BUG: warning at kernel/lockdep.c:1816/trace_hardirqs_on() (Not tainted) [<c04051ee>] show_trace_log_lvl+0x58/0x171 [<c0405802>] show_trace+0xd/0x10 [<c040591b>] dump_stack+0x19/0x1b [<c043abee>] trace_hardirqs_on+0xa2/0x11e [<c06143c3>] _spin_unlock_irq+0x22/0x26 [<c0541540>] rtc_get_rtc_time+0x32/0x176 [<c0419ba4>] hpet_rtc_interrupt+0x92/0x14d [<c0450f94>] handle_IRQ_event+0x20/0x4d [<c0451055>] __do_IRQ+0x94/0xef [<c040678d>] do_IRQ+0x9e/0xbd [<c0404a49>] common_interrupt+0x25/0x2c DWARF2 unwinder stuck at common_interrupt+0x25/0x2c Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ian Kent authored
If the timeout of an autofs mount is set to zero then umounts are disabled. This works fine, however the kernel module checks the expire timeout and goes no further if it is zero. This is not the right thing to do at shutdown as the module is passed an option to expire mounts regardless of their timeout setting. This patch allows autofs to honor the force expire option. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 25 Sep, 2006 9 commits
-
-
David S. Miller authored
Fixes section-mismatch errors. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Fixes section mismatch warnings when built as a module. Also, mark find_ledma and sun4 init function as __devinit too. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
init_socksys() was marked __init but invoked from a non-__init function. Use the correct module_{init,exit}() faciltiies while we're here and eliminate some seriously bogus ifdefs. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Moore authored
Now that all of the supporting pieces of NetLabel have a home at SourceForge update the Kconfig help text and add an entry to the MAINTAINERS file. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Moore authored
At the suggestion of Thomas Graf, rewrite NetLabel's use of Netlink attributes to better follow the common Netlink attribute usage. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Moore authored
At the suggestion of Thomas Graf, rewrite NetLabel's use of Netlink attributes to better follow the common Netlink attribute usage. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Moore authored
Add a new function, nla_validate_nested(), to validate nested Netlink attributes. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Moore authored
At the top of include/net/netlink.h is a list of Netlink interfaces, however, the nla_for_each_nested() macro was not listed. This patch adds this interface to the list at the top of the header file. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Moore authored
Change NetLabel to use the 'recvfrom' socket permission and the SECINITSID_NETMSG SELinux SID as the NetLabel base SID for incoming packets. This patch effectively makes the old, and currently unused, SELinux NETMSG permissions NetLabel permissions. Signed-of-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-