Skip to content

L
linux
Switch branch/tag
  1. 20 Jun, 2009 1 commit
    • Frederic Weisbecker's avatar
      tracing/urgent: fix unbalanced ftrace_start_up · c85a17e2
      Frederic Weisbecker authored 
      Perfcounter reports the following stats for a wide system
profiling:

 #
 # (2364 samples)
 #
 # Overhead  Symbol
 # ........  ......
 #
    15.40%  [k] mwait_idle_with_hints
     8.29%  [k] read_hpet
     5.75%  [k] ftrace_caller
     3.60%  [k] ftrace_call
     [...]

This snapshot has been taken while neither the function tracer nor
the function graph tracer was running.
With dynamic ftrace, such results show a wrong ftrace behaviour
because all calls to ftrace_caller or ftrace_graph_caller (the patched
calls to mcount) are supposed to be patched into nop if none of those
tracers are running.

The problem occurs after the first run of the function tracer. Once we
launch it a second time, the callsites will never be nopped back,
unless you set custom filters.
For example it happens during the self tests at boot time.
The function tracer selftest runs, and then the dynamic tracing is
tested too. After that, the callsites are left un-nopped.

This is because the reset callback of the function tracer tries to
unregister two ftrace callbacks in once: the common function tracer
and the function tracer with stack backtrace, regardless of which
one is currently in use.
It then creates an unbalance on ftrace_start_up value which is expected
to be zero when the last ftrace callback is unregistered. When it
reaches zero, the FTRACE_DISABLE_CALLS is set on the next ftrace
command, triggering the patching into nop. But since it becomes
unbalanced, ie becomes lower than zero, if the kernel functions
are patched again (as in every further function tracer runs), they
won't ever be nopped back.

Note that ftrace_call and ftrace_graph_call are still patched back
to ftrace_stub in the off case, but not the callers of ftrace_call
and ftrace_graph_caller. It means that the tracing is well deactivated
but we waste a useless call into every kernel function.

This patch just unregisters the right ftrace_ops for the function
tracer on its reset callback and ignores the other one which is
not registered, fixing the unbalance. The problem also happens
is .30
Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: stable@kernel.org
      c85a17e2
  3. 16 Jun, 2009 6 commits
    • Steven Rostedt's avatar
      tracing: update sample event documentation · 44ad18e0
      Steven Rostedt authored 
      The comments in the sample code is a bit confusing. This patch
cleans them up a little.
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      44ad18e0
    • Li Zefan's avatar
      tracing/filters: fix race between filter setting and module unload · 00e95830
      Li Zefan authored 
      Module unload is protected by event_mutex, while setting filter is
protected by filter_mutex. This leads to the race:

echo 'bar == 0 || bar == 10' \    |
		> sample/filter   |
                                  |  insmod sample.ko
  add_pred("bar == 0")            |
    -> n_preds == 1               |
  add_pred("bar == 100")          |
    -> n_preds == 2               |
                                  |  rmmod sample.ko
                                  |  insmod sample.ko
  add_pred("&&")                  |
    -> n_preds == 1 (should be 3) |

Now event->filter->preds is corrupted. An then when filter_match_preds()
is called, the WARN_ON() in it will be triggered.

To avoid the race, we remove filter_mutex, and replace it with event_mutex.

[ Impact: prevent corruption of filters by module removing and loading ]
Signed-off-by: default avatarLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A375A4D.6000205@cn.fujitsu.com>
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      00e95830
    • Li Zefan's avatar
      tracing/filters: free filter_string in destroy_preds() · 57be8887
      Li Zefan authored 
      filter->filter_string is not freed when unloading a module:

 # insmod trace-events-sample.ko
 # echo "bar < 100" > /mnt/tracing/events/sample/foo_bar/filter
 # rmmod trace-events-sample.ko

[ Impact: fix memory leak when unloading module ]
Signed-off-by: default avatarLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A375A30.9060802@cn.fujitsu.com>
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      57be8887
    • Steven Rostedt's avatar
      ring-buffer: use commit counters for commit pointer accounting · fa743953
      Steven Rostedt authored 
      The ring buffer is made up of three sets of pointers.

The head page pointer, which points to the next page for the reader to
get.

The commit pointer and commit index, which points to the page and index
of the last committed write respectively.

The tail pointer and tail index, which points to the page and the index
of the last reserved data respectively (non committed).

The commit pointer is only moved forward by the outer most writer.
If a nested writer comes in, it will not move the pointer forward.

The current implementation has a flaw. It assumes that the outer most
writer successfully reserved data. There's a small race window where
the outer most writer could find the tail pointer, but a nested
writer could come in (via interrupt) and move the tail forward, and
even the commit forward.

The outer writer would not realized the commit moved forward and the
accounting will break.

This patch changes the design to use counters in the per cpu buffers
to keep track of commits. The counters are incremented at the start
of the commit, and decremented at the end. If the end commit counter
is 1, then it moves the commit pointers. A loop is made to check for
races between checking and moving the commit pointers. Only the outer
commit should move the pointers anyway.

The test of knowing if a reserve is equal to the last commit update
is still needed to know for time keeping. The time code is much less
racey than the commit updates.

This change not only solves the mentioned race, but also makes the
code simpler.

[ Impact: fix commit race and simplify code ]
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      fa743953
    • Steven Rostedt's avatar
      ring-buffer: remove unused variable · 263294f3
      Steven Rostedt authored 
      Fix the compiler error:

kernel/trace/ring_buffer.c: In function 'rb_move_tail':
kernel/trace/ring_buffer.c:1236: warning: unused variable 'event'
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      263294f3
    • Steven Rostedt's avatar
      ring-buffer: have benchmark test handle discarded events · 9086c7b9
      Steven Rostedt authored 
      With the addition of commit:

  c7b09308
  ring-buffer: prevent adding write in discarded area

The ring buffer may now add discarded events when a write passes
the end of a buffer page. Before, a discarded event was only added
when the tracer deliberately created one. The ring buffer benchmark
test does not handle discarded events when it reads the buffer and
fails when it encounters one.

Also fix the increment for large data entries (luckily, the test did
not add any yet).

[ Impact: fix false failure of ring buffer self test ]
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      9086c7b9
  5. 15 Jun, 2009 7 commits
  7. 14 Jun, 2009 26 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7