- 28 Mar, 2013 4 commits
-
-
Frank Schaefer authored
Streaming doesn't work with the EM2765 if bit 5 of the output format register 0x27 is set. It's actually not clear if really has to be set for the other chips, but for now let's keep it to avoid regressions and add a comment to the code. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Frank Schaefer authored
The em25xx/em276x/em277x/em278x frame data format is different to the one used by the em2710/em2750/em28xx chips. With the recent cleanups and reorganization of the frame data processing code it can be easily extended to support these devices. Signed-off-by:
-
Frank Schaefer authored
This chip can be found in the SpeedLink VAD Laplace webcam (1ae7:9003 and 1ae7:9004). Signed-off-by:
-
Frank Schaefer authored
The webcam "SpeedLink VAD Laplace" (em2765 + ov2640) uses a special algorithm for i2c communication with the sensor, which is connected to a second i2c bus. We don't know yet how to find out which devices support/use it. It's very likely used by all em25xx and em276x+ bridges. Tests with other em28xx chips (em2820, em2882/em2883) show, that this algorithm always succeeds there although no slave device is connected. The algorithm likely also works for real i2c client devices (OV2640 uses SCCB), because the Windows driver seems to use it for probing Samsung and Kodak sensors. Signed-off-by:
-
- 26 Mar, 2013 3 commits
-
-
Hans Verkuil authored
au8522_attach is dependent on CONFIG_DVB_AU8522_DTV, not CONFIG_DVB_AU8522. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Wei Yongjun authored
sizeof() when applied to a pointer typed expression gives the size of the pointer, not that of the pointed data. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
-
Wei Yongjun authored
Add the missing unlock before return from function af9035_ctrl_msg() in the error handling case. Signed-off-by:
Antti Palosaari <crope@iki.fi> Reviewed-by:
-
- 25 Mar, 2013 33 commits
-
-
Mauro Carvalho Chehab authored
If those callbacks fail, it should return zero, and not a random value. The previous code assumed that all drivers would only change signal strength if it succeeds, but this may not be true. Signed-off-by: -
Mauro Carvalho Chehab authored
Now that those functions are only used when the corresponding function calls are defined, we don't need to check if those function calls are present at the structure before using it. Signed-off-by: -
Mauro Carvalho Chehab authored
While the driver gets AFC from the tuner, it doesn't return it back via V4L2 API due to a mistake at the return. fix it. Signed-off-by: -
Hans Verkuil authored
If the tuner frontend does not support get_rf_strength, then don't set the has_signal callback. Ditto for get_afc. Both callbacks overwrite the signal and afc fields of struct v4l2_tuner but that should only happen if the tuner can actually detect this. If it can't, then it should leave those fields alone so other subdevices can try and detect the signal/afc. This fixes the bug where the au8522 detected a signal and then tuner-core overwrote it with 0 since the xc5000 tuner does not support get_rf_strength. Signed-off-by:
-
Hans Verkuil authored
- open/close/read and poll need to take the core lock as well. - when the tuner goes to sleep we should set std_set_in_tuner_core to 0 since the tuner loses the firmware at that time. - initialize the tuner if std_set_in_tuner_core == 0 whenever: 1) g/s_tuner, s_std or s_frequency is called 2) read or poll is called 3) streamon is called Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Hans Verkuil authored
After loading the module the initial video routing is not setup. Explicitly call s_input to get this right. Signed-off-by:
-
Hans Verkuil authored
Just opening a device shouldn't have any side-effects. Signed-off-by:
-
Hans Verkuil authored
Turn it into a simple function. Signed-off-by:
-
Hans Verkuil authored
The driver crashed when the device was disconnected while an application still had a device node open. Fixed by using the release() callback of struct v4l2_device. Signed-off-by:
-
Hans Verkuil authored
Now that au0828 has been converted to the control framework these compatilibity ops are no longer needed. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Also get rid of unnecessary format type check. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
- V4L2_CAP_AUDIO was set, but enumaudio was not implemented. - audioset was never filled by enum_input - ctrl_ainput was never updated when switching the video input - g_audio was broken due to faulty logic: g_audio should set the index, it doesn't receive it from the user. Signed-off-by:
-
Hans Verkuil authored
No code change, just fixing a wrong indentation. Signed-off-by:
-
Hans Verkuil authored
- define an initial frequency - return an error if g_frequency is called for an invalid tuner index - get the clamped frequency value after setting it: i.e. the tuner driver may clamp the given frequency to a valid frequency range and ctrl_freq should get that actual clamped frequency. - remove obsolete tuner type checks (done by the core). Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
And update the other debug ioctls accordingly. Signed-off-by:
-
Hans Verkuil authored
Add support for vidioc_g_chip_name, allowing AC97 to be implemented as a second chip on the bridge with the name "ac97". v4l2-dbg can just match the name with that string in order to detect a ac97-compliant set of registers. Signed-off-by:
-
Hans Verkuil authored
It was just a placeholder and we want to get rid of the AC97 matching define. Also replace MATCH_HOST with MATCH_BRIDGE since we are here anyway. Signed-off-by:
-
Hans Verkuil authored
Simplify the debugging ioctls by creating the VIDIOC_DBG_G_CHIP_NAME ioctl. This will eventually replace VIDIOC_DBG_G_CHIP_IDENT. Chip matching is done by the name or index of subdevices or an index to a bridge chip. Most of this can all be done automatically, so most drivers just need to provide get/set register ops. In particular, it is now possible to get/set subdev registers without requiring assistance of the bridge driver. Signed-off-by:
-
Hans Verkuil authored
Caught by xmllint. Signed-off-by:
-
Hans Verkuil authored
During the transition to sub-devices several years ago non-subdev drivers had a ' at the end of their driver name to tell them apart from already converted drivers. This check was a left-over from that time and can be removed. Signed-off-by:
-
Tushar Behera authored
In vb2_buffer_done, it would be better the print the value of 'state' (current state of buffer) than to print 'vb->state' which is always VB2_BUF_STATE_ACTIVE. Signed-off-by:
Tushar Behera <tushar.behera@linaro.org> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Prefix the headers with 'solo6x10-'. Signed-off-by:
-
Hans Verkuil authored
An earlier patch temporarily disabled regional motion detection. This patch adds it back: the 'Motion Detection Enable' control is now a 'Motion Detection Mode'. And to set/get the regional thresholds two new ioctls were added to get/set those thresholds. The BUF_FLAG constants were also updated to prevent clashing with existing buffer flags. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
FMT_MPEG is for multiplexed streams, not elementary streams. The same is true for the V4L2_CID_MPEG_VIDEO_ENCODING control. Signed-off-by:
-
