- 01 Nov, 2016 13 commits
-
-
Stefan Tauner authored
[ Upstream commit ca006f78 ] This adds support to ftdi_sio for the Infineon TriBoard TC2X7 engineering board for first-generation Aurix SoCs with Tricore CPUs. Mere addition of the device IDs does the job. Signed-off-by:
Stefan Tauner <stefan.tauner@technikum-wien.at> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com>
-
Ulf Hansson authored
[ Upstream commit 9158cb29 ] Accesses to the rtsx usb device, which is the parent of the rtsx memstick device, must not be done unless it's runtime resumed. This is currently not the case and it could trigger various errors. Fix this by properly deal with runtime PM in this regards. This means making sure the device is runtime resumed, when serving requests via the ->request() callback or changing settings via the ->set_param() callbacks. Cc: <stable@vger.kernel.org> Cc: Ritesh Raj Sarraf <rrs@researchut.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Alan Stern authored
[ Upstream commit 796aa46a ] Accesses to the rtsx usb device, which is the parent of the rtsx memstick device, must not be done unless it's runtime resumed. Therefore when the rtsx_usb_ms driver polls for inserted memstick cards, let's add pm_runtime_get|put*() to make sure accesses is done when the rtsx usb device is runtime resumed. Reported-by:
Ritesh Raj Sarraf <rrs@researchut.com> Tested-by:
Alan Stern <stern@rowland.harvard.edu> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Ulf Hansson authored
[ Upstream commit 4f48aa7a ] Accesses of the rtsx sdmmc's parent device, which is the rtsx usb device, must be done when it's runtime resumed. Currently this isn't case when changing the led, so let's fix this by adding a pm_runtime_get_sync() and a pm_runtime_put() around those operations. Reported-by:
-
Ulf Hansson authored
[ Upstream commit 31cf742f ] The rtsx_usb_sdmmc driver may bail out in its ->set_ios() callback when no SD card is inserted. This is wrong, as it could cause the device to remain runtime resumed when it's unused. Fix this behaviour. Tested-by:
-
Haibo Chen authored
[ Upstream commit 02265cd6 ] Potentially overflowing expression 1000000 * data->timeout_clks with type unsigned int is evaluated using 32-bit arithmetic, and then used in a context that expects an expression of type unsigned long long. To avoid overflow, cast 1000000U to type unsigned long long. Special thanks to Coverity. Fixes: 7f05538a ("mmc: sdhci: fix data timeout (part 2)") Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Cc: stable@vger.kernel.org # v3.15+ Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit 6c83f772 ] If we don't guarantee that we will always get an interrupt at least when we're queueing our very last request, we could fall into situation where we queue every request with 'no_interrupt' set. This will cause the link to get stuck. The behavior above has been triggered with g_ether and dwc3. Cc: <stable@vger.kernel.org> Reported-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Nikolay Borisov authored
[ Upstream commit 0d7718f6 ] In case __ceph_do_getattr returns an error and the retry_op in ceph_read_iter is not READ_INLINE, then it's possible to invoke __free_page on a page which is NULL, this naturally leads to a crash. This can happen when, for example, a process waiting on a MDS reply receives sigterm. Fix this by explicitly checking whether the page is set or not. Cc: stable@vger.kernel.org # 3.19+ Signed-off-by:
Nikolay Borisov <kernel@kyup.com> Reviewed-by:
Yan, Zheng <zyan@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit d102eb5c ] The timeout loop terminates when the loop count is zero, but the decrement of the count variable is post check. So count is -1 when we check for the timeout and therefor the error message is supressed. Change it to predecrement, so the error message is emitted. [ tglx: Massaged changelog ] Fixes: a2c22510 ("irqchip: gic-v3: Refactor gic_enable_redist to support both enabling and disabling") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Sudeep Holla <sudeep.holla@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kernel-janitors@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20161014072534.GA15168@mwandaSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Alex Deucher authored
[ Upstream commit 02cfb5fc ] Ported from Rex's amdgpu change. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Taesoo Kim authored
[ Upstream commit 559cce69 ] When 'jh->b_transaction == transaction' (asserted by below) J_ASSERT_JH(jh, (jh->b_transaction == transaction || ... 'journal->j_list_lock' will be incorrectly unlocked, since the the lock is aquired only at the end of if / else-if statements (missing the else case). Signed-off-by:
Taesoo Kim <tsgatesv@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Fixes: 6e4862a5 Cc: stable@vger.kernel.org # 3.14+ Signed-off-by:
-
Ming Lei authored
[ Upstream commit bcd8f2e9 ] This patch fixes one use-after-free report[1] by KASAN. In __scsi_scan_target(), when a type 31 device is probed, SCSI_SCAN_TARGET_PRESENT is returned and the target will be scanned again. Inside the following scsi_report_lun_scan(), one new scsi_device instance is allocated, and scsi_probe_and_add_lun() is called again to probe the target and still see type 31 device, finally __scsi_remove_device() is called to remove & free the device at the end of scsi_probe_and_add_lun(), so cause use-after-free in scsi_report_lun_scan(). And the following SCSI log can be observed: scsi 0:0:2:0: scsi scan: INQUIRY pass 1 length 36 scsi 0:0:2:0: scsi scan: INQUIRY successful with code 0x0 scsi 0:0:2:0: scsi scan: peripheral device type of 31, no device added scsi 0:0:2:0: scsi scan: Sending REPORT LUNS to (try 0) scsi 0:0:2:0: scsi scan: REPORT LUNS successful (try 0) result 0x0 scsi 0:0:2:0: scsi scan: REPORT LUN scan scsi 0:0:2:0: scsi scan: INQUIRY pass 1 length 36 scsi 0:0:2:0: scsi scan: INQUIRY successful with code 0x0 scsi 0:0:2:0: scsi scan: peripheral device type of 31, no device added BUG: KASAN: use-after-free in __scsi_scan_target+0xbf8/0xe40 at addr ffff88007b44a104 This patch fixes the issue by moving the putting reference at the end of scsi_report_lun_scan(). [1] KASAN report ================================================================== [ 3.274597] PM: Adding info for serio:serio1 [ 3.275127] BUG: KASAN: use-after-free in __scsi_scan_target+0xd87/0xdf0 at addr ffff880254d8c304 [ 3.275653] Read of size 4 by task kworker/u10:0/27 [ 3.275903] CPU: 3 PID: 27 Comm: kworker/u10:0 Not tainted 4.8.0 #2121 [ 3.276258] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3.276797] Workqueue: events_unbound async_run_entry_fn [ 3.277083] ffff880254d8c380 ffff880259a37870 ffffffff94bbc6c1 ffff880078402d80 [ 3.277532] ffff880254d8bb80 ffff880259a37898 ffffffff9459fec1 ffff880259a37930 [ 3.277989] ffff880254d8bb80 ffff880078402d80 ffff880259a37920 ffffffff945a0165 [ 3.278436] Call Trace: [ 3.278528] [<ffffffff94bbc6c1>] dump_stack+0x65/0x84 [ 3.278797] [<ffffffff9459fec1>] kasan_object_err+0x21/0x70 [ 3.279063] device: 'psaux': device_add [ 3.279616] [<ffffffff945a0165>] kasan_report_error+0x205/0x500 [ 3.279651] PM: Adding info for No Bus:psaux [ 3.280202] [<ffffffff944ecd22>] ? kfree_const+0x22/0x30 [ 3.280486] [<ffffffff94bc2dc9>] ? kobject_release+0x119/0x370 [ 3.280805] [<ffffffff945a0543>] __asan_report_load4_noabort+0x43/0x50 [ 3.281170] [<ffffffff9507e1f7>] ? __scsi_scan_target+0xd87/0xdf0 [ 3.281506] [<ffffffff9507e1f7>] __scsi_scan_target+0xd87/0xdf0 [ 3.281848] [<ffffffff9507d470>] ? scsi_add_device+0x30/0x30 [ 3.282156] [<ffffffff94f7f660>] ? pm_runtime_autosuspend_expiration+0x60/0x60 [ 3.282570] [<ffffffff956ddb07>] ? _raw_spin_lock+0x17/0x40 [ 3.282880] [<ffffffff9507e505>] scsi_scan_channel+0x105/0x160 [ 3.283200] [<ffffffff9507e8a2>] scsi_scan_host_selected+0x212/0x2f0 [ 3.283563] [<ffffffff9507eb3c>] do_scsi_scan_host+0x1bc/0x250 [ 3.283882] [<ffffffff9507efc1>] do_scan_async+0x41/0x450 [ 3.284173] [<ffffffff941c1fee>] async_run_entry_fn+0xfe/0x610 [ 3.284492] [<ffffffff941a8954>] ? pwq_dec_nr_in_flight+0x124/0x2a0 [ 3.284876] [<ffffffff941d1770>] ? preempt_count_add+0x130/0x160 [ 3.285207] [<ffffffff941a9a84>] process_one_work+0x544/0x12d0 [ 3.285526] [<ffffffff941aa8e9>] worker_thread+0xd9/0x12f0 [ 3.285844] [<ffffffff941aa810>] ? process_one_work+0x12d0/0x12d0 [ 3.286182] [<ffffffff941bb365>] kthread+0x1c5/0x260 [ 3.286443] [<ffffffff940855cd>] ? __switch_to+0x88d/0x1430 [ 3.286745] [<ffffffff941bb1a0>] ? kthread_worker_fn+0x5a0/0x5a0 [ 3.287085] [<ffffffff956dde9f>] ret_from_fork+0x1f/0x40 [ 3.287368] [<ffffffff941bb1a0>] ? kthread_worker_fn+0x5a0/0x5a0 [ 3.287697] Object at ffff880254d8bb80, in cache kmalloc-2048 size: 2048 [ 3.288064] Allocated: [ 3.288147] PID = 27 [ 3.288218] [<ffffffff940b27ab>] save_stack_trace+0x2b/0x50 [ 3.288531] [<ffffffff9459f246>] save_stack+0x46/0xd0 [ 3.288806] [<ffffffff9459f4bd>] kasan_kmalloc+0xad/0xe0 [ 3.289098] [<ffffffff9459c07e>] __kmalloc+0x13e/0x250 [ 3.289378] [<ffffffff95078e5a>] scsi_alloc_sdev+0xea/0xcf0 [ 3.289701] [<ffffffff9507de76>] __scsi_scan_target+0xa06/0xdf0 [ 3.290034] [<ffffffff9507e505>] scsi_scan_channel+0x105/0x160 [ 3.290362] [<ffffffff9507e8a2>] scsi_scan_host_selected+0x212/0x2f0 [ 3.290724] [<ffffffff9507eb3c>] do_scsi_scan_host+0x1bc/0x250 [ 3.291055] [<ffffffff9507efc1>] do_scan_async+0x41/0x450 [ 3.291354] [<ffffffff941c1fee>] async_run_entry_fn+0xfe/0x610 [ 3.291695] [<ffffffff941a9a84>] process_one_work+0x544/0x12d0 [ 3.292022] [<ffffffff941aa8e9>] worker_thread+0xd9/0x12f0 [ 3.292325] [<ffffffff941bb365>] kthread+0x1c5/0x260 [ 3.292594] [<ffffffff956dde9f>] ret_from_fork+0x1f/0x40 [ 3.292886] Freed: [ 3.292945] PID = 27 [ 3.293016] [<ffffffff940b27ab>] save_stack_trace+0x2b/0x50 [ 3.293327] [<ffffffff9459f246>] save_stack+0x46/0xd0 [ 3.293600] [<ffffffff9459fa61>] kasan_slab_free+0x71/0xb0 [ 3.293916] [<ffffffff9459bac2>] kfree+0xa2/0x1f0 [ 3.294168] [<ffffffff9508158a>] scsi_device_dev_release_usercontext+0x50a/0x730 [ 3.294598] [<ffffffff941ace9a>] execute_in_process_context+0xda/0x130 [ 3.294974] [<ffffffff9508107c>] scsi_device_dev_release+0x1c/0x20 [ 3.295322] [<ffffffff94f566f6>] device_release+0x76/0x1e0 [ 3.295626] [<ffffffff94bc2db7>] kobject_release+0x107/0x370 [ 3.295942] [<ffffffff94bc29ce>] kobject_put+0x4e/0xa0 [ 3.296222] [<ffffffff94f56e17>] put_device+0x17/0x20 [ 3.296497] [<ffffffff9505201c>] scsi_device_put+0x7c/0xa0 [ 3.296801] [<ffffffff9507e1bc>] __scsi_scan_target+0xd4c/0xdf0 [ 3.297132] [<ffffffff9507e505>] scsi_scan_channel+0x105/0x160 [ 3.297458] [<ffffffff9507e8a2>] scsi_scan_host_selected+0x212/0x2f0 [ 3.297829] [<ffffffff9507eb3c>] do_scsi_scan_host+0x1bc/0x250 [ 3.298156] [<ffffffff9507efc1>] do_scan_async+0x41/0x450 [ 3.298453] [<ffffffff941c1fee>] async_run_entry_fn+0xfe/0x610 [ 3.298777] [<ffffffff941a9a84>] process_one_work+0x544/0x12d0 [ 3.299105] [<ffffffff941aa8e9>] worker_thread+0xd9/0x12f0 [ 3.299408] [<ffffffff941bb365>] kthread+0x1c5/0x260 [ 3.299676] [<ffffffff956dde9f>] ret_from_fork+0x1f/0x40 [ 3.299967] Memory state around the buggy address: [ 3.300209] ffff880254d8c200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 3.300608] ffff880254d8c280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 3.300986] >ffff880254d8c300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 3.301408] ^ [ 3.301550] ffff880254d8c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3.301987] ffff880254d8c400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3.302396] ================================================================== Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Jiri Slaby authored
[ Upstream commit 3f2d2664 ] Commit f68381a7 (mmc: block: fix packed command header endianness) correctly fixed endianness handling of packed_cmd_hdr in mmc_blk_packed_hdr_wrq_prep. But now, sparse complains about incorrect types: drivers/mmc/card/block.c:1613:27: sparse: incorrect type in assignment (different base types) drivers/mmc/card/block.c:1613:27: expected unsigned int [unsigned] [usertype] <noident> drivers/mmc/card/block.c:1613:27: got restricted __le32 [usertype] <noident> ... So annotate cmd_hdr properly using __le32 to make everyone happy. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Fixes: f68381a7 (mmc: block: fix packed command header endianness) Cc: stable@vger.kernel.org Signed-off-by:
-
- 30 Oct, 2016 1 commit
-
-
Tony Luck authored
[ Upstream commit 548acf19 ] Huge amounts of help from Andy Lutomirski and Borislav Petkov to produce this. Andy provided the inspiration to add classes to the exception table with a clever bit-squeezing trick, Boris pointed out how much cleaner it would all be if we just had a new field. Linus Torvalds blessed the expansion with: ' I'd rather not be clever in order to save just a tiny amount of space in the exception table, which isn't really criticial for anybody. ' The third field is another relative function pointer, this one to a handler that executes the actions. We start out with three handlers: 1: Legacy - just jumps the to fixup IP 2: Fault - provide the trap number in %ax to the fixup code 3: Cleaned up legacy for the uaccess error hack Signed-off-by:
Tony Luck <tony.luck@intel.com> Reviewed-by:
Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/f6af78fcbd348cf4939875cfda9c19689b5e50b8.1455732970.git.tony.luck@intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
- 23 Oct, 2016 5 commits
-
-
Sasha Levin authored
Signed-off-by: -
Mathias Nyman authored
[ Upstream commit f69115fd ] According to USB 2 specs ports need to signal resume for at least 20ms, in practice even longer, before moving to U0 state. Both host and devices can initiate resume. On device initiated resume, a port status interrupt with the port in resume state in issued. The interrupt handler tags a resume_done[port] timestamp with current time + USB_RESUME_TIMEOUT, and kick roothub timer. Root hub timer requests for port status, finds the port in resume state, checks if resume_done[port] timestamp passed, and set port to U0 state. On host initiated resume, current code sets the port to resume state, sleep 20ms, and finally sets the port to U0 state. This should also be changed to work in a similar way as the device initiated resume, with timestamp tagging, but that is not yet tested and will be a separate fix later. There are a few issues with this approach 1. A host initiated resume will also generate a resume event. The event handler will find the port in resume state, believe it's a device initiated resume, and act accordingly. 2. A port status request might cut the resume signalling short if a get_port_status request is handled during the host resume signalling. The port will be found in resume state. The timestamp is not set leading to time_after_eq(jiffies, timestamp) returning true, as timestamp = 0. get_port_status will proceed with moving the port to U0. 3. If an error, or anything else happens to the port during device initiated resume signalling it will leave all the device resume parameters hanging uncleared, preventing further suspend, returning -EBUSY, and cause the pm thread to busyloop trying to enter suspend. Fix this by using the existing resuming_ports bitfield to indicate that resume signalling timing is taken care of. Check if the resume_done[port] is set before using it for timestamp comparison, and also clear out any resume signalling related variables if port is not in U0 or Resume state This issue was discovered when a PM thread busylooped, trying to runtime suspend the xhci USB 2 roothub on a Dell XPS Cc: stable <stable@vger.kernel.org> Reported-by:
Daniel J Blueman <daniel@quora.org> Tested-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Linus Torvalds authored
[ Upstream commit 19be0eaf ] This is an ancient bug that was actually attempted to be fixed once (badly) by me eleven years ago in commit 4ceb5db9 ("Fix get_user_pages() race for write access") but that was then undone due to problems on s390 by commit f33ea7f4 ("fix get_user_pages bug"). In the meantime, the s390 situation has long been fixed, and we can now fix it by checking the pte_dirty() bit properly (and do it better). The s390 dirty bit was implemented in abf09bed ("s390/mm: implement software dirty bits") which made it into v3.9. Earlier kernels will have to look at the page state itself. Also, the VM has become more scalable, and what used a purely theoretical race back then has become easier to trigger. To fix it, we introduce a new internal FOLL_COW flag to mark the "yes, we already did a COW" rather than play racy games with FOLL_WRITE that is very fundamental, and then use the pte dirty flag to validate that the FOLL_COW flag is still valid. Reported-and-tested-by:
Phil "not Paul" Oester <kernel@linuxace.com> Acked-by:
Hugh Dickins <hughd@google.com> Reviewed-by:
Michal Hocko <mhocko@suse.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Nick Piggin <npiggin@gmail.com> Cc: Greg Thelen <gthelen@google.com> Cc: stable@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
John Stultz authored
[ Upstream commit 58bfea95 ] In commit 27727df2 ("Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING"), I changed the logic to open-code the timekeeping_get_ns() function, but I forgot to include the unit conversion from cycles to nanoseconds, breaking the function's output, which impacts users like perf. This results in bogus perf timestamps like: swapper 0 [000] 253.427536: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.426573: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.426687: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.426800: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.426905: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427022: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427127: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427239: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427346: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427463: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 255.426572: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) Instead of more reasonable expected timestamps like: swapper 0 [000] 39.953768: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.064839: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.175956: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.287103: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.398217: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.509324: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.620437: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.731546: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.842654: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.953772: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 41.064881: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) Add the proper use of timekeeping_delta_to_ns() to convert the cycle delta to nanoseconds as needed. Thanks to Brendan and Alexei for finding this quickly after the v4.8 release. Unfortunately the problematic commit has landed in some -stable trees so they'll need this fix as well. Many apologies for this mistake. I'll be looking to add a perf-clock sanity test to the kselftest timers tests soon. Fixes: 27727df2 "timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING" Reported-by:
Brendan Gregg <bgregg@netflix.com> Reported-by:
Alexei Starovoitov <alexei.starovoitov@gmail.com> Tested-and-reviewed-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable <stable@vger.kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1475636148-26539-1-git-send-email-john.stultz@linaro.orgSigned-off-by:
-
Christopher S. Hall authored
[ Upstream commit 6bd58f09 ] The timekeeping code does not currently provide a way to translate externally provided clocksource cycles to system time. The cycle count is always provided by the result clocksource read() method internal to the timekeeping code. The added function timekeeping_cycles_to_ns() calculated a nanosecond value from a cycle count that can be added to tk_read_base.base value yielding the current system time. This allows clocksource cycle values external to the timekeeping code to provide a cycle count that can be transformed to system time. Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: kevin.b.stanton@intel.com Cc: kevin.j.clarke@intel.com Cc: hpa@zytor.com Cc: jeffrey.t.kirsher@intel.com Cc: netdev@vger.kernel.org Reviewed-by:
Christopher S. Hall <christopher.s.hall@intel.com> Signed-off-by:
-
- 10 Oct, 2016 3 commits
-
-
Sasha Levin authored
Signed-off-by: -
Guenter Roeck authored
[ Upstream commit 8e4b7205 ] Since commit acb2505d ("openrisc: fix copy_from_user()"), copy_from_user() returns the number of bytes requested, not the number of bytes not copied. Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: acb2505d ("openrisc: fix copy_from_user()") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit 65c0044c ] avr32 builds fail with: arch/avr32/kernel/built-in.o: In function `arch_ptrace': (.text+0x650): undefined reference to `___copy_from_user' arch/avr32/kernel/built-in.o:(___ksymtab+___copy_from_user+0x0): undefined reference to `___copy_from_user' kernel/built-in.o: In function `proc_doulongvec_ms_jiffies_minmax': (.text+0x5dd8): undefined reference to `___copy_from_user' kernel/built-in.o: In function `proc_dointvec_minmax_sysadmin': sysctl.c:(.text+0x6174): undefined reference to `___copy_from_user' kernel/built-in.o: In function `ptrace_has_cap': ptrace.c:(.text+0x69c0): undefined reference to `___copy_from_user' kernel/built-in.o:ptrace.c:(.text+0x6b90): more undefined references to `___copy_from_user' follow Fixes: 8630c322 ("avr32: fix copy_from_user()") Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by:
Havard Skinnemoen <hskinnemoen@gmail.com> Acked-by:
Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Signed-off-by:
-
- 04 Oct, 2016 5 commits
-
-
Al Viro authored
[ Upstream commit 1ae2293d ] Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
[ Upstream commit 1245800c ] The iter->seq can be reset outside the protection of the mutex. So can reading of user data. Move the mutex up to the beginning of the function. Fixes: d7350c3f ("tracing/core: make the read callbacks reentrants") Cc: stable@vger.kernel.org # 2.6.30+ Reported-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Matt Redfearn authored
[ Upstream commit 8f46cca1 ] This patch fixes the possibility of a deadlock when bringing up secondary CPUs. The deadlock occurs because the set_cpu_online() is called before synchronise_count_slave(). This can cause a deadlock if the boot CPU, having scheduled another thread, attempts to send an IPI to the secondary CPU, which it sees has been marked online. The secondary is blocked in synchronise_count_slave() waiting for the boot CPU to enter synchronise_count_master(), but the boot cpu is blocked in smp_call_function_many() waiting for the secondary to respond to it's IPI request. Fix this by marking the CPU online in cpu_callin_map and synchronising counters before declaring the CPU online and calculating the maps for IPIs. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Reported-by:
Justin Chen <justinpopo6@gmail.com> Tested-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Paul Burton authored
[ Upstream commit 7e956304 ] In the mipsr2_decoder() function, used to emulate pre-MIPSr6 instructions that were removed in MIPSr6, the init_fpu() function is called if a removed pre-MIPSr6 floating point instruction is the first floating point instruction used by the task. However, init_fpu() performs varous actions that rely upon not being migrated. For example in the most basic case it sets the coprocessor 0 Status.CU1 bit to enable the FPU & then loads FP register context into the FPU registers. If the task were to migrate during this time, it may end up attempting to load FP register context on a different CPU where it hasn't set the CU1 bit, leading to errors such as: do_cpu invoked from kernel context![#2]: CPU: 2 PID: 7338 Comm: fp-prctl Tainted: G D 4.7.0-00424-g49b0c82 #2 task: 838e4000 ti: 88d38000 task.ti: 88d38000 $ 0 : 00000000 00000001 ffffffff 88d3fef8 $ 4 : 838e4000 88d38004 00000000 00000001 $ 8 : 3400fc01 801f8020 808e9100 24000000 $12 : dbffffff 807b69d8 807b0000 00000000 $16 : 00000000 80786150 00400fc4 809c0398 $20 : 809c0338 0040273c 88d3ff28 808e9d30 $24 : 808e9d30 00400fb4 $28 : 88d38000 88d3fe88 00000000 8011a2ac Hi : 0040273c Lo : 88d3ff28 epc : 80114178 _restore_fp+0x10/0xa0 ra : 8011a2ac mipsr2_decoder+0xd5c/0x1660 Status: 1400fc03 KERNEL EXL IE Cause : 1080002c (ExcCode 0b) PrId : 0001a920 (MIPS I6400) Modules linked in: Process fp-prctl (pid: 7338, threadinfo=88d38000, task=838e4000, tls=766527d0) Stack : 00000000 00000000 00000000 88d3fe98 00000000 00000000 809c0398 809c0338 808e9100 00000000 88d3ff28 00400fc4 00400fc4 0040273c 7fb69e18 004a0000 004a0000 004a0000 7664add0 8010de18 00000000 00000000 88d3fef8 88d3ff28 808e9100 00000000 766527d0 8010e534 000c0000 85755000 8181d580 00000000 00000000 00000000 004a0000 00000000 766527d0 7fb69e18 004a0000 80105c20 ... Call Trace: [<80114178>] _restore_fp+0x10/0xa0 [<8011a2ac>] mipsr2_decoder+0xd5c/0x1660 [<8010de18>] do_ri+0x90/0x6b8 [<80105c20>] ret_from_exception+0x0/0x10 Fix this by disabling preemption around the call to init_fpu(), ensuring that it starts & completes on one CPU. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Fixes: b0a668fb ("MIPS: kernel: mips-r2-to-r6-emul: Add R2 emulator for MIPS R6") Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.0+ Patchwork: https://patchwork.linux-mips.org/patch/14305/Signed-off-by:
-
Jeff Mahoney authored
[ Upstream commit 325c50e3 ] If the subvol/snapshot create/destroy ioctls are passed a regular file with execute permissions set, we'll eventually Oops while trying to do inode->i_op->lookup via lookup_one_len. This patch ensures that the file descriptor refers to a directory. Fixes: cb8e7090 (Btrfs: Fix subvolume creation locking rules) Fixes: 76dda93c (Btrfs: add snapshot/subvolume destroy ioctl) Cc: <stable@vger.kernel.org> #v2.6.29+ Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
- 03 Oct, 2016 13 commits
-
-
Al Viro authored
[ Upstream commit e23d4159 ] Switching iov_iter fault-in to multipages variants has exposed an old bug in underlying fault_in_multipages_...(); they break if the range passed to them wraps around. Normally access_ok() done by callers will prevent such (and it's a guaranteed EFAULT - ERR_PTR() values fall into such a range and they should not point to any valid objects). However, on architectures where userland and kernel live in different MMU contexts (e.g. s390) access_ok() is a no-op and on those a range with a wraparound can reach fault_in_multipages_...(). Since any wraparound means EFAULT there, the fix is trivial - turn those while (uaddr <= end) ... into if (unlikely(uaddr > end)) return -EFAULT; do ... while (uaddr <= end); Reported-by:
Jan Stancek <jstancek@redhat.com> Tested-by:
-
Ashish Samant authored
[ Upstream commit d21c353d ] If we punch a hole on a reflink such that following conditions are met: 1. start offset is on a cluster boundary 2. end offset is not on a cluster boundary 3. (end offset is somewhere in another extent) or (hole range > MAX_CONTIG_BYTES(1MB)), we dont COW the first cluster starting at the start offset. But in this case, we were wrongly passing this cluster to ocfs2_zero_range_for_truncate() to zero out. This will modify the cluster in place and zero it in the source too. Fix this by skipping this cluster in such a scenario. To reproduce: 1. Create a random file of say 10 MB xfs_io -c 'pwrite -b 4k 0 10M' -f 10MBfile 2. Reflink it reflink -f 10MBfile reflnktest 3. Punch a hole at starting at cluster boundary with range greater that 1MB. You can also use a range that will put the end offset in another extent. fallocate -p -o 0 -l 1048615 reflnktest 4. sync 5. Check the first cluster in the source file. (It will be zeroed out). dd if=10MBfile iflag=direct bs=<cluster size> count=1 | hexdump -C Link: http://lkml.kernel.org/r/1470957147-14185-1-git-send-email-ashish.samant@oracle.comSigned-off-by:
Ashish Samant <ashish.samant@oracle.com> Reported-by:
Saar Maoz <saar.maoz@oracle.com> Reviewed-by:
Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Eric Ren <zren@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Jan Kara authored
[ Upstream commit 96d41019 ] fanotify_get_response() calls fsnotify_remove_event() when it finds that group is being released from fanotify_release() (bypass_perm is set). However the event it removes need not be only in the group's notification queue but it can have already moved to access_list (userspace read the event before closing the fanotify instance fd) which is protected by a different lock. Thus when fsnotify_remove_event() races with fanotify_release() operating on access_list, the list can get corrupted. Fix the problem by moving all the logic removing permission events from the lists to one place - fanotify_release(). Fixes: 5838d444 ("fanotify: fix double free of pending permission events") Link: http://lkml.kernel.org/r/1473797711-14111-3-git-send-email-jack@suse.czSigned-off-by:
Jan Kara <jack@suse.cz> Reported-by:
Miklos Szeredi <mszeredi@redhat.com> Tested-by:
-
Jan Kara authored
[ Upstream commit 12703dbf ] Implement a function that can be called when a group is being shutdown to stop queueing new events to the group. Fanotify will use this. Fixes: 5838d444 ("fanotify: fix double free of pending permission events") Link: http://lkml.kernel.org/r/1473797711-14111-2-git-send-email-jack@suse.czSigned-off-by:
-
Ian Kent authored
[ Upstream commit 7cbdb4a2 ] Somewhere along the way the autofs expire operation has changed to hold a spin lock over expired dentry selection. The autofs indirect mount expired dentry selection is complicated and quite lengthy so it isn't appropriate to hold a spin lock over the operation. Commit 47be6184 ("fs/dcache.c: avoid soft-lockup in dput()") added a might_sleep() to dput() causing a WARN_ONCE() about this usage to be issued. But the spin lock doesn't need to be held over this check, the autofs dentry info. flags are enough to block walks into dentrys during the expire. I've left the direct mount expire as it is (for now) because it is much simpler and quicker than the indirect mount expire and adding spin lock release and re-aquires would do nothing more than add overhead. Fixes: 47be6184 ("fs/dcache.c: avoid soft-lockup in dput()") Link: http://lkml.kernel.org/r/20160912014017.1773.73060.stgit@pluto.themaw.netSigned-off-by:
Ian Kent <raven@themaw.net> Reported-by:
Takashi Iwai <tiwai@suse.de> Tested-by:
-
Al Viro authored
[ Upstream commit ea01a184 ] * make autofs4_expire_indirect() skip the dentries being in process of expiry * do *not* mess with list_move(); making sure that dentry with AUTOFS_INF_EXPIRING are not picked for expiry is enough. * do not remove NO_RCU when we set EXPIRING, don't bother with smp_mb() there. Clear it at the same time we clear EXPIRING. Makes a bunch of tests simpler. * rename NO_RCU to WANT_EXPIRE, which is what it really is. Signed-off-by:
-
Joseph Qi authored
[ Upstream commit e6f0c6e6 ] Commit ac7cf246 ("ocfs2/dlm: fix race between convert and recovery") checks if lockres master has changed to identify whether new master has finished recovery or not. This will introduce a race that right after old master does umount ( means master will change), a new convert request comes. In this case, it will reset lockres state to DLM_RECOVERING and then retry convert, and then fail with lockres->l_action being set to OCFS2_AST_INVALID, which will cause inconsistent lock level between ocfs2 and dlm, and then finally BUG. Since dlm recovery will clear lock->convert_pending in dlm_move_lockres_to_recovery_list, we can use it to correctly identify the race case between convert and recovery. So fix it. Fixes: ac7cf246 ("ocfs2/dlm: fix race between convert and recovery") Link: http://lkml.kernel.org/r/57CE1569.8010704@huawei.comSigned-off-by:
Joseph Qi <joseph.qi@huawei.com> Signed-off-by:
Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Marcin Nowakowski authored
[ Upstream commit b244614a ] cpu_has_fpu macro uses smp_processor_id() and is currently executed with preemption enabled, that triggers the warning at runtime. It is assumed throughout the kernel that if any CPU has an FPU, then all CPUs would have an FPU as well, so it is safe to perform the check with preemption enabled - change the code to use raw_ variant of the check to avoid the warning. Signed-off-by:
Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 4.0+ Patchwork: https://patchwork.linux-mips.org/patch/14125/Signed-off-by:
-
Fabio Estevam authored
[ Upstream commit 4de349e7 ] On a imx6ul-pico board the following error is seen during system suspend: dpm_run_callback(): platform_pm_resume+0x0/0x54 returns -110 PM: Device 2090000.flexcan failed to resume: error -110 The reason for this suspend error is because when the CAN interface is not active the clocks are disabled and then flexcan_chip_enable() will always fail due to a timeout error. In order to fix this issue, only call flexcan_chip_enable/disable() when the CAN interface is active. Based on a patch from Dong Aisheng in the NXP kernel. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Kristian H. Kristensen authored
[ Upstream commit 47a66e45 ] Similar to struct drm_update_draw, struct drm_mode_fb_cmd2 has an unaligned 64 bit field (modifier). This get packed differently between 32 bit and 64 bit modes on architectures that can handle unaligned 64 bit access (X86 and IA64). Other architectures pack the structs the same and don't need the compat wrapper. Use the same condition for drm_mode_fb_cmd2 as we use for drm_update_draw. Note that only the modifier will be packed differently between compat and non-compat versions. Reviewed-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
Kristian H. Kristensen <hoegsberg@chromium.org> [seanpaul added not at bottom of commit msg re: modifier] Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1473801645-116011-1-git-send-email-hoegsberg@chromium.org Cc: stable@vger.kernel.org Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Al Viro authored
[ Upstream commit d4690f1e ] ... by turning it into what used to be multipages counterpart Cc: stable@vger.kernel.org Signed-off-by:
-
Alan Stern authored
[ Upstream commit 08c5cd37 ] Some full-speed mceusb infrared transceivers contain invalid endpoint descriptors for their interrupt endpoints, with bInterval set to 0. In the past they have worked out okay with the mceusb driver, because the driver sets the bInterval field in the descriptor to 1, overwriting whatever value may have been there before. However, this approach was never sanctioned by the USB core, and in fact it does not work with xHCI controllers, because they use the bInterval value that was present when the configuration was installed. Currently usbcore uses 32 ms as the default interval if the value in the endpoint descriptor is invalid. It turns out that these IR transceivers don't work properly unless the interval is set to 10 ms or below. To work around this mceusb problem, this patch changes the endpoint-descriptor parsing routine, making the default interval value be 10 ms rather than 32 ms. Signed-off-by:
Wade Berrier <wberrier@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by:
-
Al Viro authored
[ Upstream commit 1c109fab ] get_user_ex(x, ptr) should zero x on failure. It's not a lot of a leak (at most we are leaking uninitialized 64bit value off the kernel stack, and in a fairly constrained situation, at that), but the fix is trivial, so... Cc: stable@vger.kernel.org Signed-off-by:
-
