- 07 Jul, 2020 18 commits
-
-
Thomas Zimmermann authored
As the inverse to ast_cursor_show(), ast_cursor_hide() disables the HW cursor. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-9-tzimmermann@suse.de
-
Thomas Zimmermann authored
The ast_cursor_show() helper enables the cursor to be displayed. No need to repeat that operation in the plane's atomic-update function. Signed-off-by:
-
Thomas Zimmermann authored
Having a cursor move function is misleading, as it actually enables the cursor's image for displaying. So rename it to ast_cursor_show(). It's semantics is to show a cursor at the specified location on the screen. The displayed cursor is always the image in the cursor front BO. This change also simplifies struct ast_crtc to being a mere wrapper around around struct drm_crtc. It will be removed by a later patch. Signed-off-by:
-
Thomas Zimmermann authored
The new helper ast_cursor_page_flip() switches the cursor's front and back BOs. This simplifies the cursor plane's update helper. Signed-off-by:
-
Thomas Zimmermann authored
Cursor image and checksum go hand in hand. Update both in the same place. The helper cannot fail, so remove the return type. Signed-off-by:
-
Thomas Zimmermann authored
The new helper ast_cursor_blit() updates a cursor's backbuffer HW BO from a framebuffer structure. The cursor plane's prepare_fb() function now uses the new interface. Pinning and mapping of BOs is done automatically by the helper. This includes the source BO, which was not pinned by the original code in prepare_fb(). Signed-off-by:
-
Thomas Zimmermann authored
Removes some typecasting. v2: * use to_ast_private() instead of struct drm_device.dev_private Signed-off-by:
-
Thomas Zimmermann authored
The cursor manipulation functions are unrelated to modesetting. Move them into their own file. Signed-off-by:
-
Maxime Ripard authored
Now that the code in vc4_crtc accessing registers is only meant for the pixelvalve, it doesn't make sense anymore to test whether we're accessing the TXP or not and we can safely remove those checks. Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Reviewed-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/c044daba470fcb1cb57e3d34d88f75325b2ebbab.1591882579.git-series.maxime@cerno.tech
-
Maxime Ripard authored
The TXP so far has been leveraging the PixelValve infrastructure in the driver, that was really two things: the interaction with DRM's CRTC concept, the setup of the underlying pixelvalve and the setup of the shared HVS, the pixelvalve part being irrelevant to the TXP since it accesses the HVS directly. Now that we have a clear separation between the three parts, we can represent the TXP as a CRTC of its own, leveraging the common CRTC and HVS code, but leaving aside the pixelvalve setup. Signed-off-by:
-
Maxime Ripard authored
The TXP driver is the only place where we need to set the txp_armed flag, so let's move the function in the TXP driver. Signed-off-by:
-
Maxime Ripard authored
The upcoming patches to turn the TXP into a full-blown CRTC will have the same CRTC initialisation code, so let's move it into a separate, public, function so that we can reuse it later on. Signed-off-by:
-
Maxime Ripard authored
The CRTC hooks are called both for the TXP and the pixelvalve, yet some will read / write the registers as if the device was a pixelvalve, which won't really work. Let's make sure we only access those registers if we are running on a PixelValve. Signed-off-by:
-
Maxime Ripard authored
The vc4_crtc_data structure is currently storing data related to both the general CRTC information needed by the rest of the vc4 driver (like HVS output and available FIFOs) and some related to the pixelvalve attached to that CRTC. Let's split this into two structures so that we can reuse the CRTC part into the TXP later on. Signed-off-by:
-
Maxime Ripard authored
We'll need the CRTC state related functions to be exported so that we can reuse them for the TXP. Signed-off-by:
-
Maxime Ripard authored
The CRTC in vc4 is backed by two devices, the HVS that does the composition and the PixelValve that does the timing generation. The writeback is kind of a special case since it doesn't have an associated pixelvalve but goes straight from the HVS to the TXP. Therefore, it makes sense to move out the HVS setup code into helpers so that we can also reuse them from the TXP driver. Signed-off-by:
-
Maxime Ripard authored
We'll need the HVS to be bound before the TXP for the upcoming reworks, but it needs to happen before the PV are bound so that the code to set the possible_crtcs field works properly on the TXP. Move it right between the two devices. Signed-off-by:
-
Maxime Ripard authored
The VC4_SET_FIELD and VC4_GET_FIELD are reimplementing most of the logic already defined in FIELD_SET and FIELD_GET. Let's convert the vc4 macros to use the FIELD_* macros. Signed-off-by:
-
- 06 Jul, 2020 2 commits
-
-
Brian Starkey authored
In cases such as DRM_FORMAT_MOD_SAMSUNG_16_16_TILE, the modifier describes a generic pixel re-ordering which can be applicable to multiple vendors. Define an alias: DRM_FORMAT_MOD_GENERIC_16_16_TILE, which can be used to describe this layout in a vendor-neutral way, and add a comment about the expected usage of such "generic" modifiers. Changes in v2: - Move note about future cases to comment (Daniel) Signed-off-by:
Brian Starkey <brian.starkey@arm.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Liviu Dudau <Liviu.Dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200626164800.11595-1-brian.starkey@arm.com
-
Tian Tao authored
code refactoring for hibmc_drv_vdac.c, no actual function changes. v2: remove the debug message. v3: embedding connector and encoder in struct hibmc_drm_private. Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Reviewed-by:
-
- 03 Jul, 2020 6 commits
-
-
Neil Armstrong authored
Since the VD1 Amlogic FBC decoder is now configured by the overlay driver, commit the right registers to decode the Amlogic FBC frame. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Tested-by:
Kevin Hilman <khilman@baylibre.com> Reviewed-by:
-
Neil Armstrong authored
Setup the Amlogic FBC decoder for the VD1 video overlay plane to use read the FBC header as Scatter Memory layout reference. Signed-off-by:
-
Neil Armstrong authored
Setup the Amlogic FBC decoder for the VD1 video overlay plane to use a different superblock size for the Memory Saving mode. Signed-off-by:
-
Neil Armstrong authored
Setup the Amlogic FBC decoder for the VD1 video overlay plane. The VD1 Amlogic FBC decoder is integrated in the pipeline like the YUV pixel reading/formatter but used a direct memory address instead. This adds support for the basic layout, and needs to calculate the content body size since the header is allocated after. Signed-off-by:
-
Neil Armstrong authored
Add the registers of the VPU VD1 Amlogic FBC decoder module, and routing register. Signed-off-by:
-
Neil Armstrong authored
Amlogic uses a proprietary lossless image compression protocol and format for their hardware video codec accelerators, either video decoders or video input encoders. It considerably reduces memory bandwidth while writing and reading frames in memory. The underlying storage is considered to be 3 components, 8bit or 10-bit per component, YCbCr 420, single plane : - DRM_FORMAT_YUV420_8BIT - DRM_FORMAT_YUV420_10BIT This modifier will be notably added to DMA-BUF frames imported from the V4L2 Amlogic VDEC decoder. This introduces the basic layout composed of: - a body content organized in 64x32 superblocks with 4096 bytes per superblock in default mode. - a 32 bytes per 128x64 header block This layout is tranferrable between Amlogic SoCs supporting this modifier. The Memory Saving option exist changing the layout superblock size to save memory when using 8bit components pixels size. Finally is also adds the Scatter Memory layout, meaning the header contains IOMMU references to the compressed frames content to optimize memory access and layout. In this mode, only the header memory address is needed, thus the content memory organization is tied to the current producer execution and cannot be saved/dumped neither transferrable between Amlogic SoCs supporting this modifier. Signed-off-by:
-
- 02 Jul, 2020 13 commits
-
-
Rob Herring authored
Convert the analog TV, DVI, HDMI, and VGA connector bindings to DT schema format. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Maxime Ripard <mripard@kernel.org> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200630200216.1172566-1-robh@kernel.org
-
Daniel Vetter authored
Now also comes with the added benefit of doing a drm_crtc_vblank_off(), which means vblank state isn't ill-defined and fail-y at driver load before the first modeset on each crtc. v2: Compile fix. Oops. Reviewed-by:
Roland Scheidegger <sroland@vmware.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Roland Scheidegger <sroland@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200612204940.2134653-1-daniel.vetter@ffwll.ch Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-7-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Now also comes with the added benefit of doing a drm_crtc_vblank_off(), which means vblank state isn't ill-defined and fail-y at driver load before the first modeset on each crtc. Reviewed-by:
-
Daniel Vetter authored
Now also comes with the added benefit of doing a drm_crtc_vblank_off(), which means vblank state isn't ill-defined and fail-y at driver load before the first modeset on each crtc. Acked-by:
Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by:
-
Daniel Vetter authored
Now also comes with the added benefit of doing a drm_crtc_vblank_off(), which means vblank state isn't ill-defined and fail-y at driver load before the first modeset on each crtc. Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Daniel Vetter authored
Now also comes with the added benefit of doing a drm_crtc_vblank_off(), which means vblank state isn't ill-defined and fail-y at driver load before the first modeset on each crtc. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Daniel Vetter authored
Only when vblanks are supported ofc. Some drivers do this already, but most unfortunately missed it. This opens up bugs after driver load, before the crtc is enabled for the first time. syzbot spotted this when loading vkms as a secondary output. Given how many drivers are buggy it's best to solve this once and for all in shared helper code. Aside from moving the few existing calls to drm_crtc_vblank_reset into helpers (i915 doesn't use helpers, so keeps its own) I think the regression risk is minimal: atomic helpers already rely on drivers calling drm_crtc_vblank_on/off correctly in their hooks when they support vblanks. And driver that's failing to handle vblanks after this is missing those calls already, and vblanks could only work by accident when enabling a CRTC for the first time right after boot. Big thanks to Tetsuo for helping track down what's going wrong here. There's only a few drivers which already had the necessary call and needed some updating: - komeda, atmel and tidss also needed to be changed to call __drm_atomic_helper_crtc_reset() intead of open coding it - tegra and msm even had it in the same place already, just code motion, and malidp already uses __drm_atomic_helper_crtc_reset(). - Laurent noticed that rcar-du and omap open-code their crtc reset and hence would actually be broken by this patch now. So fix them up by reusing the helpers, which brings the drm_crtc_vblank_reset() back. Only call left is in i915, which doesn't use drm_mode_config_reset, but has its own fastboot infrastructure. So that's the only case where we actually want this in the driver still. I've also reviewed all other drivers which set up vblank support with drm_vblank_init. After the previous patch fixing mxsfb all atomic drivers do call drm_crtc_vblank_on/off as they should, the remaining drivers are either legacy kms or legacy dri1 drivers, so not affected by this change to atomic helpers. v2: Use the drm_dev_has_vblank() helper. v3: Laurent pointed out that omap and rcar-du used drm_crtc_vblank_off instead of drm_crtc_vblank_reset. Adjust them too. v4: Laurent noticed that rcar-du and omap open-code their crtc reset and hence would actually be broken by this patch now. So fix them up by reusing the helpers, which brings the drm_crtc_vblank_reset() back. v5: also mention rcar-du and ompadrm in the proper commit message above (Laurent). Reviewed-by:
Boris Brezillon <boris.brezillon@collabora.com> Acked-by:
Thierry Reding <treding@nvidia.com> Link: https://syzkaller.appspot.com/bug?id=0ba17d70d062b2595e1f061231474800f076c7cbReported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot+0871b14ca2e2fb64f6e3@syzkaller.appspotmail.com Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "James (Qian) Wang" <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mihail Atanassov <mihail.atanassov@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Brian Masney <masneyb@onstation.org> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: zhengbin <zhengbin13@huawei.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-tegra@vger.kernel.org Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Signed-off-by:
-
Suraj Upadhyay authored
Resolve checkpatch issues for missing blank lines after declarations. Issues found in multiple files with checkpatch.pl. Signed-off-by:
Suraj Upadhyay <usuraj35@gmail.com> Signed-off-by:
-
Lionel Landwerlin authored
There was probably a misunderstand on how the dma-fence-chain is supposed to work or what dma_fence_chain_find_seqno() is supposed to return. dma_fence_chain_find_seqno() is here to give us the fence to wait upon for a particular point in the timeline. The timeline progresses only when all the points prior to a given number have completed. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: dc2f7e67 ("dma-buf: Exercise dma-fence-chain under selftests") Link: https://patchwork.freedesktop.org/patch/372960/Signed-off-by:
Christian König <christian.koenig@amd.com>
-
Lionel Landwerlin authored
This reverts commit 5de376bb. This change breaks synchronization of a timeline. dma_fence_chain_find_seqno() might be a bit of a confusing name but this function is not trying to find a particular seqno, is supposed to give a fence to wait on for a particular point in the timeline. In a timeline, a particular value is reached when all the points up to and including that value have signaled. Signed-off-by:
-
Christian König authored
As discussed on the list. Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> Acked-by:
-
Imre Deak authored
The old epoch counter was left uninited, so the function returned a changed state always. While at it debug print the old epoch counter as well. Fixes: 35205ee9 ("drm/i915: Send hotplug event if edid had changed") Cc: Kunal Joshi <kunal1.joshi@intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200701180001.15857-1-imre.deak@intel.com
-
Tian Tao authored
using the new API drmm_kzalloc() instead of devm_kzalloc() v3: still fixed include statements sorted alphabetically. v2: keep the DRM include statements sorted alphabetically. Signed-off-by:
-
- 01 Jul, 2020 1 commit
-
-
Ondrej Jirman authored
The reset pin is inverted, so if we don't assert reset, the actual gpio will be high and may keep driving the IO port of the panel. Signed-off-by:
Ondrej Jirman <megous@megous.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Tested-by:
Guido Günther <agx@sigxcpu.org> Reviewed-by:
-
