- 15 Jan, 2018 5 commits
-
-
Jason Gunthorpe authored
This matches what the userspace copy of this header has been doing for a while. imm_data is an opaque 4 byte array carried over the network, and invalidate_rkey is in CPU byte order. Signed-off-by:Jason Gunthorpe <jgg@mellanox.com>
-
Parav Pandit authored
Resolving DMAC for RoCE is applicable to only Connected mode QPs. So resolve DMAC for only for Connected mode QPs. Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
-
Parav Pandit authored
Instead of returning 0 (success) for RoCE scenarios where DMAC should not be resolved, avoid such attempt and make code consistent with ib_create_user_ah(). Signed-off-by:
-
Parav Pandit authored
Currently ah_attr is initialized by the ib_cm layer for rdma_cm based applications. For RoCE transport ah_attr.roce.dmac is already initialized by ib_cm, rdma_cm either from wc, path record, route resolve, explicit path record setting depending on active or passive side QP. Therefore avoid resolving DMAC for QP of kernel consumers. Signed-off-by:
-
Parav Pandit authored
Currently qp->port stores the port number whenever IB_QP_PORT QP attribute mask is set (during QP state transition to INIT state). This port number should be stored for the real QP when XRC target QP is used. Follow the ib_modify_qp() implementation and hide the access to ->real_qp. Fixes: a512c2fb ("IB/core: Introduce modify QP operation with udata") Signed-off-by:
-
- 11 Jan, 2018 11 commits
-
-
Randy Dunlap authored
Use correct parameter names and formatting in function kernel-doc notation to eliminate warnings from scripts/kernel-doc. ../drivers/infiniband/sw/rdmavt/mr.c:784: warning: Excess function parameter 'ibmfr' description in 'rvt_map_phys_fmr' ../drivers/infiniband/sw/rdmavt/vt.c:234: warning: Excess function parameter 'intex' description in 'rvt_query_pkey' ../drivers/infiniband/sw/rdmavt/vt.c:266: warning: Excess function parameter 'index' description in 'rvt_query_gid' ../drivers/infiniband/sw/rdmavt/vt.c:306: warning: Excess function parameter 'data' description in 'rvt_alloc_ucontext' ../drivers/infiniband/sw/rdmavt/cq.c:65: warning: Excess function parameter 'sig' description in 'rvt_cq_enter' ../drivers/infiniband/sw/rdmavt/qp.c:279: warning: Excess function parameter 'qpt' description in 'rvt_free_all_qps' ../drivers/infiniband/sw/rdmavt/mcast.c:282: warning: Excess function parameter 'igd' description in 'rvt_attach_mcast' ../drivers/infiniband/sw/rdmavt/mcast.c:345: warning: Excess function parameter 'igd' description in 'rvt_detach_mcast' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: linux-doc@vger.kernel.org Acked-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Randy Dunlap authored
Use correct parameter name and description in kernel-doc notation to eliminate a kernel-doc warning. ../drivers/infiniband/ulp/opa_vnic/opa_vnic_vema.c:730: warning: Excess function parameter 'cport' description in 'opa_vnic_vema_send_trap' Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc warning for ib_fmr_pool_map_phys() and also format it with function description and text spacing. ../drivers/infiniband/core/fmr_pool.c:404: warning: Excess function parameter 'pool' description in 'ib_fmr_pool_map_phys' Signed-off-by:
-
Randy Dunlap authored
Change function parameter name in kernel-doc notation and other comments to eliminate a kernel-doc warning. ../drivers/infiniband/core/verbs.c:1790: warning: Excess function parameter 'wq_init_attr' description in 'ib_create_wq' Signed-off-by:
-
Parav Pandit authored
The 'if' logic in ucma_query_path was broken with OPA was introduced and started to treat RoCE paths as as OPA paths. Invert the logic of the 'if' so only OPA paths are treated as OPA paths. Otherwise the path records returned to rdma_cma users are mangled when in RoCE mode. Fixes: 57520751 ("IB/SA: Add OPA path record type") Signed-off-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
-
Parav Pandit authored
rdma_set_ib_path() missed setting path record fields for RoCE transport when RoCE support was added. This results in setting incorrect ndev, destination mac address, incorrect GID type etc errors when user space attempts to set a raw IB path using the roce IB path compatibility mapping from userspace. Fixes: 3c86aa70 ("RDMA/cm: Add RDMA CM support for IBoE devices") Signed-off-by:
-
Parav Pandit authored
Since 2006 there has been no user of rdmacm based application to make use of setting multiple path records using rdma_set_ib_paths API. Therefore code is simplified to allow setting one path record entry. Now that it sets only single path, it is renamed to reflect the same. Signed-off-by:
-
Parav Pandit authored
Introduce a helper function to set path record L2 fields for RoCE. This includes setting GID type, destination mac address and netdev ifindex. Signed-off-by:
-
Parav Pandit authored
The net namespace is set in addr during create_rdma_id(), cma_resolve_iboe_route() should use that instead of the init namespace. The original code was added in commit fa20105e ("IB/cma: Add support for network namespaces"), but this path wasn't in use back then. This patch updates the code to use right namespace, as preparation for improving namespace support. Signed-off-by:
-
Huy Nguyen authored
There is a need to increase number of possible char devices to support large number of SR-IOV instances. The current limit is in the range of 64-128 devices/ports. Increase it to support up to 1024. The patch performs the following steps to refactor the code: 1. Removes the split bitmap for fixed and overflow dev numbers. 2. Pre-allocates the non-legacy major number range during driver initialization, choosen for simplicity. 3. Add new define (RDMA_MAX_PORTS) that is shared between all drivers. This is the maximum total number of ports on all struct ib_devices. 4. Set RDMA_MAX_PORTS to 1024. Signed-off-by:
Huy Nguyen <huyn@mellanox.com> Signed-off-by:
-
Huy Nguyen authored
Remove the locks that protect character device bitmaps of uverbs, umad and issm. The character device bitmaps are accessed in "client->add" and "client->remove" calls from ib_register_device and ib_unregister_device respectively. These calls are already protected by the "device_mutex" mutex. Thus, the spinlocks are not needed. Signed-off-by:
-
- 10 Jan, 2018 2 commits
-
-
Bart Van Assche authored
The following sequence: * Change queue pair state into IB_QPS_ERR. * Post a work request on the queue pair. Triggers the following race condition in the rdma_rxe driver: * rxe_qp_error() triggers an asynchronous call of rxe_completer(), the function that examines the QP send queue. * rxe_post_send() posts a work request on the QP send queue. If rxe_completer() runs prior to rxe_post_send(), it will drain the send queue and the driver will assume no further action is necessary. However, once we post the send to the send queue, because the queue is in error, no send completion will ever happen and the send will get stuck. In order to process the send, we need to make sure that rxe_completer() gets run after a send is posted to a queue pair in an error state. This patch ensures that happens. Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Moni Shoua <monis@mellanox.com> Cc: <stable@vger.kernel.org> # v4.8 Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Colin Ian King authored
The initial assignment to mdev is redundant as mdev is re-assigned later and the first assigned value is never read. Remove this redundant assignment. Cleans up clang warning: drivers/infiniband/hw/mlx5/main.c:359:24: warning: Value stored to 'mdev' during its initialization is never read Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
- 08 Jan, 2018 22 commits
-
-
Zhu Yanjun authored
In xmit, there is a skb_clone. This function copies the struct sk_buff. And some parameters are changed to the new skb. Then the new skb is sent while the old skb is freed. While the function skb_clone is removed, the parameter changes are made on the old skb, then the old skb is sent. It can also work well. The following tests are made. server client --------- --------- |1.1.1.1|<----rxe-channel--->|1.1.1.2| --------- --------- On server: rping -s -a 1.1.1.1 -v -C 1000 -S 512 On client: rping -c -a 1.1.1.1 -v -C 1000 -S 512 The kernel config CONFIG_DEBUG_KMEMLEAK is enabled on both server and client. This test runs for several hours. There is no memory leak and the whole system can work well. As the above network, the following tests are made. Server: ibv_rc_pingpong -d rxe0 -g 1 Client: ibv_rc_pingpong -d rxe0 -g 1 1.1.1.1 The result on Server. Before: 8192000 bytes in 0.88 seconds = 74.36 Mbit/sec 1000 iters in 0.88 seconds = 881.30 usec/iter After: 8192000 bytes in 0.81 seconds = 81.15 Mbit/sec 1000 iters in 0.81 seconds = 807.62 usec/iter The throughput is enhanced and the latency is reduced. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Joe Jin <joe.jin@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by:
-
Zhu Yanjun authored
The variable recv_sockets is only used in the file rxe_net.c. So it is better to add static type to it. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Joe Jin <joe.jin@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
Doug Ledford authored
Merging in 12 patch series from Bart that required changes in the current for-rc branch in order to apply cleanly. Signed-off-by: -
Bart Van Assche authored
Since all I/O context state changes are already serialized, it is not necessary to protect I/O context state changes with the I/O context spinlock. Hence remove that spinlock. Signed-off-by:
-
Bart Van Assche authored
It is not necessary to obtain ioctx->spinlock when reading the ioctx state. Since after removal of this locking only a single line remains, inline the srpt_get_cmd_state() function. Signed-off-by:
-
Bart Van Assche authored
Introduce a function for converting a GUID into an ASCII string. This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
Disabling an SRP target port causes the state of all QPs associated with a port to be changed into IB_QPS_ERR. Avoid that this causes one error message per I/O context to be reported. Signed-off-by:
-
Bart Van Assche authored
At least when running the ib_srpt driver on top of the rdma_rxe driver it is easy to trigger a zero-length write completion in the CH_DISCONNECTED state. Hence make the message that reports this less noisy. Signed-off-by:
-
Bart Van Assche authored
Make the ib_srpt driver use the IPv6 format for GIDs in log messages to improve consistency of this driver with other RDMA kernel drivers. Signed-off-by:
-
Bart Van Assche authored
Verify whether port numbers are in the expected range before using these as an array index. Complain if a port number is out of range. Signed-off-by:
-
Bart Van Assche authored
Since the SRQ event message is only useful for debugging purposes, reduce its severity from "informational" to "debug". Signed-off-by:
-
Bart Van Assche authored
Rename rsp_size into max_rsp_size and SRPT_RQ_SIZE into MAX_SRPT_RQ_SIZE. The new names better reflect the role of this member variable and constant. Since the prefix "srp_" is superfluous in the context of the function that creates an RDMA channel, rename srp_sq_size into sq_size. Signed-off-by:
-
Bart Van Assche authored
This patch avoids that the following command reports any warnings: scripts/kernel-doc -none drivers/infiniband/ulp/srpt/ib_srpt.h Signed-off-by:
-
Bart Van Assche authored
Avoid that warnings about missing parameter descriptions are reported when building with W=1. Signed-off-by:
-
Bart Van Assche authored
Fixes: commit a42d985b ("ib_srpt: Initial SRP Target merge for v3.3-rc1") Signed-off-by:
-
Daniel Jurgens authored
Set the current capability to the max capability. Doing so enables dual port RoCE functionality if supported by the firmware. Signed-off-by:
-
Daniel Jurgens authored
When operating in dual port RoCE mode FW doesn't support steering for raw QPs on the slave port. They still work on the master port, but the user has no way of knowing which port is the master. The capability is reported per device, not per port. Signed-off-by:
-
Daniel Jurgens authored
Route performance query MADs to the correct mlx5_core_dev when using dual port RoCE mode. Signed-off-by:
-
Daniel Jurgens authored
When in dual port mode setting a RoCE GID for any port flows through the master ports mlx5_core_dev. Provide an interface to set the port when sending this command. Signed-off-by:
-
Daniel Jurgens authored
Update the counter interface for multiple ports. Some counter sets always comes from the primary device. Port specific counters should be accessed per mlx5_core_dev not always through the IB master mdev. Signed-off-by:
-
Parav Pandit authored
When there are multiple ports for single IB(RoCE) device, support debugfs entries to be available for each port. Signed-off-by:
-
Daniel Jurgens authored
Port operations must be routed to their native mlx5_core_dev. A multiport RoCE device registers itself as having 2 ports even before a 2nd port is affiliated. If an unaffilated port is queried use capability information from the master port, these values are the same. Signed-off-by:
-
