Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

byBBPreEDIndex value is initially 0, this means that from
cold BBvUpdatePreEDThreshold is never set.

This means that sensitivity may be in an ambiguous state,
failing to scan any wireless points or at least distant ones.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change s_vSaveTxPktInfo and BSSvUpdateNodeTxCounter to use vnt_tx_pkt_info
relayed to BSSvUpdateNodeTxCounter via INTnsProcessData.

pStatistic->abyTxPktInfo[byPktNum].byBroadMultiUni is unused and discarded.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use netstats rx_packets and rx_frame_errors.

Add frame errors to RXbBulkInProcessData

The current scStatistic.RxFcsErrCnt only records
USB errors not frame errors.

The scStatistic.RxOkCnt only recorded successful USB
transfers not actual successfully received packets.

So a more accurate reading is to use netstats rx_packets and
rx_frame_errors.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Calculate the qual from the tx_packets and wstats.discard.retries and
apply to wstats.qual.qual

Discard pDevice->scStatistic.LinkQuality.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Apply directly to net_device_stats and wireless stats.

tx_bytes are relayed from s_vSaveTxPktInfo via scStatistic,
so collect them there.

All other statistics in STAvUpdateTDStatCounter are dead code
and don't reach user.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These serve no purpose at all, and can only mask real type
clash issues that one would want to actually see.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is only part of the original Lustre tree commit. Main part of the
original commit modifies server side code.

Lustre-change: http://review.whamcloud.com/6765
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3467Signed-off-by: Mikhail Pershin <mike.pershin@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

- Move OUT handler to the unified target code, so it can be
  used by both MDS and OST.

Lustre-change: http://review.whamcloud.com/6763
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3467Signed-off-by: Mikhail Pershin <mike.pershin@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
[pick client side of change. target is mostly server side code -- PengTao]
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Import creates a released file using new RAID pattern flag
Import used a new ioctl() to implement the import in the
client kernel.

Lustre-change: http://review.whamcloud.com/6536
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3363Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
[Fix up kuid_t/guid_t conversion in llite/file.c -- Peng Tao]
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This change adds a priority parameter to the route module settings.
This paramter can be >= 0. Like hops, the lower the prioirty number
the higher the priority.  So lower numbered priorities will be
selected over higher numbers.

Lustre-change: http://review.whamcloud.com/5663
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2934Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These macros are only used on server side.

Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds lots of comments and it will help others
to review and enhance.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Zsmalloc has two methods 1) copy-based and 2) pte based to
access objects that span two pages.
You can see history why we supported two approach from [1].

But it was bad choice that adding hard coding to select arch
which want to use pte based method because there are lots of
SoC in an architecure and they can have different cache size,
CPU speed and so on so it would be better to expose it to user
as selectable Kconfig option like Andrew Morton suggested.

[1] https://lkml.org/lkml/2012/7/11/58Acked-by: Nitin Gupta <ngupta@vflare.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

No one seems to be working on it anymore, and it really should be merged
into the already-existing btusb driver.  Also, there is not any proper
author attribution on the code (it was copied from the in-kernel
driver...)

If someone wants to pick this back up, we can easily revert this, but
for now, delete the driver.

Cc: Yu-Chen, Cho <acho@suse.com>
Cc: Jay Hung <jay.hung@mediatek.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes C99 style comments from the driver and whenever
possible attempts to match coding style of the rest of the driver.
Signed-off-by: Daniel Dodge <danieldodgese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

White space clean up and remove camel case from variables.

pDevice-> priv
ntStatus -> status
wLength ->length
pbyAddr -> addr
pbyAgc -> agc
wLengthAgc ->length_agc
abyArray -> array
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I fell over the problem reported in
https://github.com/raspberrypi/linux/pull/390:

"Issuing low-speed packets when the root port is in full-speed mode
 causes the root port to stop responding. Explicitly fail when
 enqueuing URBs to a LS endpoint on a FS bus."

with my dwc2 testing in NetBSD, so I adapted the change to dwc2.
Signed-off-by: Nick Hudson <skrll@netbsd.org>
[paulz: fixed up the patch to compile under Linux, and tested it]
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add mx6 hdmi transmitter support.

Original work has been done by Sascha Hauer and Tony Prisk.
Special thanks to Russell King for his carefully review, many bug fixes and
testing of the mx6 HDMI driver.

Tested on the following boards:
- mx6q sabresd
- mx6dl sabresd
- mx6solo wandboard
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor this function a bit to remove the need for an extra indent
level and cleanup some of the odd line breaks.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Clean up the local variables, 'sdev_no' and 'asic' are both used in
simple for () loops. Use the local variable 'i' for both cases. The
'n_subdevs' variable is only used in one place, just remove it.

For aesthetics, add some whitespace to the subdevice init and reorder
it to follow the more typical style in comedi drivers.

Remove the unnecessary init of s->len_chanlist for subdevices that do
not support async commands (interrupts). The core will default it to
the correct value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The <linux/slab.h> header is no longer needed by this driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'enabled_mask' is a bit mask of the channels that are enabled
for interrupt detection and should be an unsigned int.

The 'stop_count' is a >= 0 value that is set by the unsigned int
cmd->stop_arg. Make it an unsigned int.

The 'active' and 'continuous' members are flags. Make them unsigned
int bit-fields to save a bit of space.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add some comments about the two spinlock_t variables in the private
data. Also, add come comments for the functions that do not need to
lock/unlock the spinlock.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

To reduce the potential for bugs, and better document the code, introduce
some inline helper functions to consolidate the calculations needed to get
the 'iobase' for a given asic and the 'asic' and 'port' associated with a
given subdevice.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'triggered' value is read directly from the three trigger id
registers and does not have any extra data that needs masked off.
Remove the 'mytrig' local variable and just use 'triggered' directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This dio subdevice (*insn_bits) function does not follow the "norm"
for comedi drivers. It also _appears_ to return the incorrect state
of the channels.

Use the comedi_dio_update_state() helper to handle the boilerplate
for updating the output channel state. Due to the hardware we then
need to invert the state and mask the input channels before updating
the outputs.

Then read the hardware and invert the result to get the current true
state of the dio channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The subdevice private data is only needed for each 'asic' not for each
subdevice. Since the 'asic' can be calculated easily from the subdevice
we can merge the subdevice private data members directly into the
private data.

This removes the need to kcalloc/free the subdevice private data and
saves a bit of space.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'asic' associated with a subdevice can be easily calculated. The
functions that use this member in the subdevice private data can only
be called by the subdevices that support interrupts. Just calculate
the 'asic' when needed and remove the member variable and sanity checks.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Unfortunatly, since there could be two asics, we can't use dev->read_subdev
to get the subdevice. But, the comedi_subdevice associated with the 'asic'
can easily be calculated. This allows removing the for () loop that searched
for the correct subdevice.

Tidy up the function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently only the pcmuio_handle_asic_interrupt() function uses the
spinlock in the private data to protect the read of the paged interrupt
id registers. All accesses to the paged registers should be protected
to ensure that the page is not changed until the access is complete.
Move the lock/unlock into the pcmuio_{write,read}() functions to make
sure the access completes correctly. Rename the spinlock to variable
to clarify its use.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Legacy (ISA) interrupts are not sharable so this driver should not
be passing the IRQF_SHARED flag when requesting the interrupts.

This driver supports two board types:
  PCM-UIO48 with one asic (one interrupt source)
  PCM-UIO96 with two asics (two interrupt sources)

The PCM-UIO96 has a jumper that allows the two interrupt sources to
share an interrupt. This is safe for legacy interrupts as long as
the "shared" interrupt is handled by a single driver.

Modify the request_irq() code in this driver to correctly request the
interrupts. For the PCM-UI048 case (one asic) only one request_irq()
is needed. For the PCM-UIO96 (two asics) there are three cases:

  1) irq is shared, one request_irq() call
  2) only one asic has an irq, one request_irq() call
  3) two irqs, two request_irq() calls

The irq for the first asic (dev->irq) will be requested during the
attach if required. The comedi core will handle the freeing of this
irq during the detach.

The irq for the second asic (devpriv->irq2) will also be requested
during the attach if required. The freeing of this irq will be
handled by the driver during the detach.

Move the board reset and interrupt request code so it occurs early
in the attach. We can then check dev->irq and devpriv->irq2 to see
if the subdevice command support actually needs to be initialized.

This also simplifies the interrupt handler. The irq can be simply
checked against dev->irq and devpriv->irq2 to see which asic caused
the interrupt.

Add a call to pcmuio_reset() in the (*detach) to make sure the
interrupts are disabled before freeing the irqs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>