- 07 Jan, 2009 40 commits
-
-
Rafael J. Wysocki authored
pci_fixup_device() is called too early in pci_pm_poweroff() and too late in pci_pm_restore(). Moreover, pci_pm_restore_noirq() calls pci_fixup_device() twice and in a wrong way. Fix that. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Andrew Patterson authored
The cpu_relax() function can be a noop on certain architectures like IA-64 when CPU threads are disabled, so use msleep instead during link retraining busy/wait loop. Introduce define LINK_RETRAIN_TIMEOUT instead of hard-coding timeout in pcie_aspm_configure_common_clock. Use time_after() to avoid jiffy wraparound when checking for expired timeout. After timeout expires, recheck link status register link training bit instead of checking for expired timeout to avoid possible false positive. Note that Matthew Wilcox came up with the first rough version of this patch. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Rafael J. Wysocki authored
Add kerneldoc comments to the reamining functions in drivers/pci/pcie/portdrv_core.c . Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Rafael J. Wysocki authored
Rearrange code in drivers/pci/pcie/portdrv_bus.c and drivers/pci/pcie/portdrv_core.c so that related functions and data structures are closer together. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Rafael J. Wysocki authored
There is a problem with the suspend and resume of PCI Express port service devices that the ->suspend() and ->resume() routines of each service device are called twice in each suspend-resume cycle, which is obviously wrong. The scenario is that first, the PCI Express port driver calls suspend and resume routines of each port service driver from its pcie_portdrv_suspend() and pcie_portdrv_resume() callbacks, respectively (which is correct), and second, the pcie_port_bus_type driver calls them from its ->suspend() and ->resume() callbacks (which is not correct, because it doesn't happen at the right time). The solution is to remove the ->suspend() and ->resume() callbacks from pcie_port_bus_type and the associated functions. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Rafael J. Wysocki authored
Add kerneldoc comments to some functions in drivers/pci/pcie/portdrv_core.c, since the code in there is not easy to follow without any additional description. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Rafael J. Wysocki authored
pcibios_enable_device() and pcibios_disable_device() don't handle IRQs for devices that have MSI enabled and it should treat the devices with MSI-X enabled in the same way. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Ben Hutchings authored
pci_disable_device() disables many features, like MSI-X, which we never reenable in efx_reset(). Further, calls to pci_enable_device() and pci_disable_device() must be matched since the nesting count was introduced, so switch to using pci_clear_master() instead. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Ben Hutchings authored
During an online device reset it may be useful to disable bus-mastering. pci_disable_device() does that, and far more besides, so is not suitable for an online reset. Add pci_clear_master() which does just this. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Julia Lawall authored
func is checked not to be NULL a few lines before. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; position p1,p2; @@ if (x@p1 == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( x@p2 == NULL | x@p2 != NULL ) // another path to the test that is not through p1? @s exists@ local idexpression r.x; position r.p1,r.p2; @@ ... when != x@p1 ( x@p2 == NULL | x@p2 != NULL ) @fix depends on !s@ position r.p1,r.p2; expression x,E; statement S1,S2; @@ ( - if ((x@p2 != NULL) || ...) S1 | - if ((x@p2 == NULL) && ...) S1 | - BUG_ON(x@p2 == NULL); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Kenji Kaneshige authored
Clean up register definitions related to PCI Express Hot plug. - Add register definitions into include/linux/pci_regs.h, and use them instead of pciehp's locally definied register definitions. - Remove pciehp's locally defined register definitions - Remove unused register definitions in pciehp. - Some minor cleanups. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Kenji Kaneshige authored
Bit 10 in Link Status register used to be defined as Training Error in the PCI Express 1.0a specification. But it was removed by Training Error ECN and is no longer defined. So pciehp must ignore the value read from it. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Shaohua Li authored
In a PCIe hierarchy with a switch present, if the link state of an endpoint device is changed, we must check the whole hierarchy from the endpoint device to root port, and for each link in the hierarchy, the new link state should be configured. Previously, the implementation checked the state but forgot to configure the links between root port to switch. Fixes Novell bz #448987. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Tested-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Bjorn Helgaas authored
Since pci_bus has a struct device, use dev_printk directly instead of faking it by hand. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Bjorn Helgaas authored
Since pci_bus has a struct device, use dev_printk directly instead of faking it by hand. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Stephen Hemminger authored
The VPD on all devices may not be 32K. Unfortunately, there is no generic way to find the size, so this adds a simple API hook to reset it. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Stephen Hemminger authored
Change PCI VPD API which was only used by sysfs to something usable in drivers. * move iteration over multiple words to the low level * use conventional types for arguments * add exportable wrapper Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Stephen Hemminger authored
Accessing the VPD area can take a long time. The existing VPD access code fails consistently on my hardware. There are comments in the SysKonnect vendor driver that it can take up to 13ms per word. Change the access routines to: * use a mutex rather than spinning with IRQ's disabled and lock held * have a much longer timeout * call cond_resched while spinning Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Bjorn Helgaas authored
Use the generic pci_common_swizzle() instead of arch-specific code. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Bjorn Helgaas authored
Use the generic pci_common_swizzle() instead of arch-specific code. Note that pci_common_swizzle() loops based on dev->bus->self, not dev->bus->parent as the sh simple_swizzle() did. I think they are equivalent for this purpose. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Bjorn Helgaas authored
Use the generic pci_common_swizzle() instead of arch-specific code. Note that pci_common_swizzle() loops based on dev->bus->self, not dev->bus->parent as the mips common_swizzle() did. I think they are equivalent for this purpose. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Bjorn Helgaas authored
Use the generic pci_common_swizzle() instead of arch-specific code. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Bjorn Helgaas authored
Use the generic pci_common_swizzle() instead of arch-specific code. Note that pci_common_swizzle() loops based on dev->bus->self, not dev->bus->parent as the alpha common_swizzle() did. I think they are equivalent for this purpose. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Bjorn Helgaas authored
This patch adds pci_common_swizzle(), which swizzles INTx values all the way up to a root bridge. This common implementation can replace several architecture-specific ones. This should someday be combined with pci_get_interrupt_pin(), but I left it separate for now to make reviewing easier. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Kenji Kaneshige authored
Some ACPI related PCI hotplug code can be shared among PCI hotplug drivers. This patch introduces the following functions in drivers/pci/hotplug/acpi_pcihp.c to share the code, and changes acpiphp and pciehp to use them. - int acpi_pci_detect_ejectable(struct pci_bus *pbus) This checks if the specified PCI bus has ejectable slots. - int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle) This checks if the specified handle is ejectable ACPI PCI slot. The 'pbus' parameter is needed to check if 'handle' is PCI related ACPI object. This patch also introduces the following inline function in include/linux/pci-acpi.h, which is useful to get ACPI handle of the PCI bridge from struct pci_bus of the bridge's secondary bus. - static inline acpi_handle acpi_pci_get_bridge_handle(struct pci_bus *pbus) This returns ACPI handle of the PCI bridge which generates PCI bus specified by 'pbus'. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Kenji Kaneshige authored
ACPI based hot-pluggable PCIe slot detection logic was added to prevent the problem non hot-pluggable PCIe slot was detected as hot-pluggable. The slot detection logic can be selected through 'pciehp_detect_mode', but it would be better if it is selected automatically. This patch adds 'auto' option for 'pciehp_detect_mode'. When it is specified, pciehp judges which 'acpi' or 'pcie' should be used. It seems that the physical slot number is duplicated among some slots on most of the platforms with the above-mentioned problem. So 'auto' mode uses this information to judge which 'acpi' or 'pcie' should be used. That is, if duplicated physical slot numbers are detected, 'acpi' mode is used. This method is not perfect, but it's realistic. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Kenji Kaneshige authored
There is a problem that some non hot-pluggable PCIe slots are detected as hot-pluggable by pciehp on some platforms. The immediate cause of this problem is that hot-plug capable bit in the Slot Capabilities register is set even for non hot-pluggable slots on those platforms. It seems a BIOS/hardware problem, but we need workaround about that. Some of those platforms define hot-pluggable PCIe slots on ACPI namespace properly, while hot-plug capable bit in the Slot Capabilities register is set improperly. So using ACPI namespace information in pciehp to detect PCIe hot-pluggable slots would be a workaround. This patch adds 'pciehp_detect_mode' module option. When 'acpi' is specified, pciehp uses ACPI namespace information to detect PCIe hot-pluggable slots. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Rusty Russell authored
This uses work_on_cpu(), rather than altering the cpumask of the thread which we happen to be. Note the cleanups: 1) I've removed the CONFIG_NUMA test, since dev_to_node() returns -1 for !CONFIG_NUMA anyway and the compiler will eliminate it. 2) No need to reset mempolicy to default (a bad idea anyway) since work_on_cpu is run from a workqueue. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Rafael J. Wysocki authored
Suspend-resume of PCI Express ports has recently been moved into _suspend_late() and _resume_early() callbacks, but some functions executed from there should not be called with interrupts disabled, eg. pci_enable_device(). For this reason, split the suspend-resume of PCI Express ports into parts to be executed with interrupts disabled and with interrupts enabled. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Rafael J. Wysocki authored
Currently, PCI devices without the PM capability that are power manageable by the platform (eg. ACPI) are not handled correctly by pci_set_power_state(), because their current_state field is not updated to reflect the new power state of the device. Fix this by making pci_update_current_state() accept additional argument representing the power state of the device as set by the platform. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Jesse Barnes authored
When PCI devices are initialized, we check whether they support PCI PM caps and set the device can_wakeup flag if so. However, some devices may have platform provided wakeup events rather than PCI PME signals, so we need to set can_wakeup in that case too. Doing so should allow wakeups from many more devices, especially on cost constrained systems. Reported-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Joseph Chan <JosephChan@via.com.tw> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Yu Zhao authored
This patch splits a new function, pci_bus_add_child(), from pci_bus_add_devices(). The new function can be used to register PCI buses to the device core. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Yu Zhao authored
Cleanup pci_bus_add_devices() by negating the conditional and continuing, rather than having a single conditional take up the whole body. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Yu Zhao authored
Add a function to map a given resource number to a corresponding register so drivers can get the offset and type of device specific BARs. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Yu Zhao authored
Allow pci_alloc_child_bus() to allocate buses without bridge devices. Some SR-IOV devices can occupy more than one bus number, but there is no explicit bridges because that have internal routing mechanism. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Yu Zhao authored
Export __pci_read_base() so it can be used by whole PCI subsystem. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Yu Zhao authored
Remove the unnecessary number of resources condition checks because the pci_update_resource() will check availability of the resources. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Yu Zhao authored
This patch moves all definitions of the PCI resource names to an 'enum', and also replaces some hard-coded resource variables with symbol names. This change eases introduction of device specific resources. Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Yu Zhao authored
This cleanup removes unnecessary argument 'struct resource *res' in pci_update_resource(), so it takes same arguments as other companion functions (pci_assign_resource(), etc.). Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Yu Zhao authored
Change parameter of pci_ari_enabled() from 'pci_dev' to 'pci_bus'. ARI forwarding on the bridge mostly concerns the subordinate devices rather than the bridge itself. So this change will make the function easier to use. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-