- 11 May, 2016 1 commit
-
-
Arnd Bergmann authored
gcc-6 started warning by default about variables that are not used anywhere and that are marked 'const', generating many false positives in an allmodconfig build, e.g.: arch/arm/mach-davinci/board-da830-evm.c:282:20: warning: 'da830_evm_emif25_pins' defined but not used [-Wunused-const-variable=] arch/arm/plat-omap/dmtimer.c:958:34: warning: 'omap_timer_match' defined but not used [-Wunused-const-variable=] drivers/bluetooth/hci_bcm.c:625:39: warning: 'acpi_bcm_default_gpios' defined but not used [-Wunused-const-variable=] drivers/char/hw_random/omap-rng.c:92:18: warning: 'reg_map_omap4' defined but not used [-Wunused-const-variable=] drivers/devfreq/exynos/exynos5_bus.c:381:32: warning: 'exynos5_busfreq_int_pm' defined but not used [-Wunused-const-variable=] drivers/dma/mv_xor.c:1139:34: warning: 'mv_xor_dt_ids' defined but not used [-Wunused-const-variable=] This is similar to the existing -Wunused-but-set-variable warning that was added in an earlier release and that we disable by default now and only enable when W=1 is set, so it makes sense to do the same here. Once we have eliminated the majority of the warnings for both, we can put them back into the default list. We probably want this in backport kernels as well, to allow building them with gcc-6 without introducing extra warnings. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Olof Johansson <olof@lixom.net> Acked-by:
Lee Jones <lee.jones@linaro.org> Cc: stable@vger.kernel.org Signed-off-by:
Michal Marek <mmarek@suse.com>
-
- 10 May, 2016 9 commits
-
-
Masahiro Yamada authored
Currently, arg-check is implemented as follows: arg-check = $(strip $(filter-out $(cmd_$(1)), $(cmd_$@)) \ $(filter-out $(cmd_$@), $(cmd_$(1))) ) This does not care about the order of arguments that appear in $(cmd_$(1)) and $(cmd_$@). So, if_changed and friends never rebuild the target if only the argument order is changed. This is a problem when the link order is changed. Apparently, obj-y += foo.o obj-y += bar.o and obj-y += bar.o obj-y += foo.o should be distinguished because the link order determines the probe order of drivers. So, built-in.o should be rebuilt when the order of objects is changed. This commit fixes arg-check to compare the old/current commands including the argument order. Of course, this change has a side effect; Kbuild will react to the change of compile option order. For example, "-DFOO -DBAR" and "-DBAR -DFOO" should give no difference to the build result, but false positive should be better than false negative. I am moving space_escape to the top of Kbuild.include just for a matter of preference. In practical terms, space_escape can be defined after arg-check because arg-check uses "=" flavor, not ":=". Having said that, collecting convenient variables in one place makes sense from the point of readability. Chaining "%%%SPACE%%%" to "_-_SPACE_-_" is also a matter of taste at this point. Actually, it can be arbitrary as long as it is an unlikely used string. The only problem I see in "%%%SPACE%%%" is that "%" is a special character in "$(patsubst ...)" context. This commit just uses "$(subst ...)" for arg-check, but I am fixing it now in case we might want to use it in $(patsubst ...) context in the future. Signed-off-by:Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Nicolas Pitre authored
When only one symbol was listed and therefore the line didn't contain any space to separate multiple symbols, that symbol got ignored. Reported-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
-
Nicolas Pitre authored
In kernel/cgroup.c there is: #define SUBSYS(_x) \ DEFINE_STATIC_KEY_TRUE(_x ## _cgrp_subsys_enabled_key); \ DEFINE_STATIC_KEY_TRUE(_x ## _cgrp_subsys_on_dfl_key); \ EXPORT_SYMBOL_GPL(_x ## _cgrp_subsys_enabled_key); \ EXPORT_SYMBOL_GPL(_x ## _cgrp_subsys_on_dfl_key); The expansion of this macro causes multiple EXPORT_SYMBOL_GPL() instances to appear on the same preprocessor line output, confusing the sed script expecting only one of them per line. Unfortunately this can't be fixed nicely in the sed script as sed's regexp can't do non greedy matching. Fix this by turning any semicolon into a line break before filtering. Reported-by: -
Arnd Bergmann authored
When gcov profiling is enabled, we see a lot of spurious warnings about possibly uninitialized variables being used: arch/arm/mm/dma-mapping.c: In function 'arm_coherent_iommu_map_page': arch/arm/mm/dma-mapping.c:1085:16: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/st/clk-flexgen.c: In function 'st_of_flexgen_setup': drivers/clk/st/clk-flexgen.c:323:9: warning: 'num_parents' may be used uninitialized in this function [-Wmaybe-uninitialized] kernel/cgroup.c: In function 'cgroup_mount': kernel/cgroup.c:2119:11: warning: 'root' may be used uninitialized in this function [-Wmaybe-uninitialized] All of these are false positives, so it seems better to just disable the warnings whenever GCOV is enabled. Most users don't enable GCOV, and based on a prior patch, it is now also disabled for 'allmodconfig' builds, so there should be no downsides of doing this. Signed-off-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by:
-
Arnd Bergmann authored
Enabling CONFIG_GCOV_PROFILE_ALL produces us a lot of warnings like lib/lz4/lz4hc_compress.c: In function 'lz4_compresshcctx': lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1504 bytes is larger than 1024 bytes [-Wframe-larger-than=] After some investigation, I found that this behavior started with gcc-4.9, and opened https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69702. A suggested workaround for it is to use the -fno-tree-loop-im flag that turns off one of the optimization stages in gcc, so the code runs a little slower but does not use excessive amounts of stack. We could make this conditional on the gcc version, but I could not find an easy way to do this in Kbuild and the benefit would be fairly small, given that most of the gcc version in production are affected now. I'm marking this for 'stable' backports because it addresses a bug with code generation in gcc that exists in all kernel versions with the affected gcc releases. Signed-off-by:
-
Arnd Bergmann authored
Enabling gcov is counterproductive to compile testing: it significantly increases the kernel image size, compile time, and it produces lots of false positive "may be used uninitialized" warnings as the result of missed optimizations. This is in line with how UBSAN_SANITIZE_ALL and PROFILE_ALL_BRANCHES work, both of which have similar problems. With an ARM allmodconfig kernel, I see the build time drop from 283 minutes CPU time to 225 minutes, and the vmlinux size drops from 43MB to 26MB. Signed-off-by:
-
Arnd Bergmann authored
CONFIG_PROFILE_ALL_BRANCHES confuses gcc-5.x to the degree that it prints incorrect warnings about a lot of variables that it thinks can be used uninitialized, e.g.: i2c/busses/i2c-diolan-u2c.c: In function 'diolan_usb_xfer': i2c/busses/i2c-diolan-u2c.c:391:16: warning: 'byte' may be used uninitialized in this function iio/gyro/itg3200_core.c: In function 'itg3200_probe': iio/gyro/itg3200_core.c:213:6: warning: 'val' may be used uninitialized in this function leds/leds-lp55xx-common.c: In function 'lp55xx_update_bits': leds/leds-lp55xx-common.c:350:6: warning: 'tmp' may be used uninitialized in this function misc/bmp085.c: In function 'show_pressure': misc/bmp085.c:363:10: warning: 'pressure' may be used uninitialized in this function power/ds2782_battery.c: In function 'ds2786_get_capacity': power/ds2782_battery.c:214:17: warning: 'raw' may be used uninitialized in this function These are all false positives that either rob someone's time when trying to figure out whether they are real, or they get people to send wrong patches to shut up the warnings. Nobody normally wants to run a CONFIG_PROFILE_ALL_BRANCHES kernel in production, so disabling the whole class of warnings for this configuration has no serious downsides either. Signed-off-by:
-
Arnd Bergmann authored
CC_OPTIMIZE_FOR_SIZE disables the often useful -Wmaybe-unused warning, because that causes a ridiculous amount of false positives when combined with -Os. This means a lot of warnings don't show up in testing by the developers that should see them with an 'allmodconfig' kernel that has CC_OPTIMIZE_FOR_SIZE enabled, but only later in randconfig builds that don't. This changes the Kconfig logic around CC_OPTIMIZE_FOR_SIZE to make it a 'choice' statement defaulting to CC_OPTIMIZE_FOR_PERFORMANCE that gets added for this purpose. The allmodconfig and allyesconfig kernels now default to -O2 with the maybe-unused warning enabled. Signed-off-by:
-
Robert Jarzmik authored
When the kernel path contains a space or a colon somewhere in the path name, the modules_install target doesn't work anymore, as the path names are not enclosed in double quotes. It is also supposed that and O= build will suffer from the same weakness as modules_install. Instead of checking and improving kbuild to resist to directories including these characters, error out early to prevent any build if the kernel's main directory contains a space. Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
- 27 Apr, 2016 2 commits
-
-
Nicolas Pitre authored
The following renames occurred recently: cmd_cc_i_c --> cmd_cpp_i_c cmd_as_s_S --> cmd_cpp_s_S The respective cc_*_c and as_*_S patterns no longer match the above therefore additional patterns are needed. Signed-off-by:
-
Nicolas Pitre authored
The if_changed directive is useless against phony targets. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 2441e78b ("kbuild: better abstract vmlinux sequential prerequisites") Signed-off-by:
Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by:
Michal Marek <mmarek@suse.cz>
-
- 26 Apr, 2016 2 commits
-
-
Nicolas Pitre authored
When CONFIG_TRIM_UNUSED_KSYMS=y and CONFIG_BUILD_DOCSRC=y it is possible to get the following error: ERROR: "cn_del_callback" [Documentation/connector/cn_test.ko] undefined! ERROR: "cn_add_callback" [Documentation/connector/cn_test.ko] undefined! ERROR: "cn_netlink_send" [Documentation/connector/cn_test.ko] undefined! ../scripts/Makefile.modpost:91: recipe for target '__modpost' failed It is not sufficient to do "vmlinux-dirs += Documentation" as this also depends on the headers_check target, and all of this needs to be done before adjust_autoksyms.sh is executed. Let's sort this out by gathering those sequential prerequisites in a make target of their own, separate from the vmlinux target. And by doing so, the special autoksyms_recursive target is no longer needed. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Tested-by:
-
Nicolas Ferre authored
When a different output directory is specified during the build process (with O= or KBUILD_OUTPUT), the call to adjust_autoksyms.sh script fails with the following error: /bin/sh scripts/adjust_autoksyms.sh \ "make KBUILD_MODULES=1 -f ../Makefile autoksyms_recursive" /bin/sh: scripts/adjust_autoksyms.sh: No such file or directory make[2]: *** [vmlinux] Error 127 make[1]: *** [sub-make] Error 2 make: *** [__sub-make] Error 2 Using the absolute path with $(srctree) variable solves the problem. This is in case the CONFIG_TRIM_UNUSED_KSYMS option is specified. Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Fixes: 23121ca2 ("kbuild: create/adjust generated/autoksyms.h") Cc: Nicolas Pitre <nico@linaro.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
- 20 Apr, 2016 9 commits
-
-
Michal Marek authored
The compiler can accept -DKBUILD_MODNAME="foo", it's just a matter of quoting. That way, we reduce the gcc command line a bit. Signed-off-by: -
Masahiro Yamada authored
This command just preprocesses .S files into .s files, so cmd_cpp_s_S seems more suitable. Signed-off-by:
-
Masahiro Yamada authored
This command just preprocesses .c files into .i files, so cmd_cpp_i_c seems more suitable. Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Masahiro Yamada authored
"PHONY += FORCE" is already cared by scripts/Makefile.build, which these files are included from. Signed-off-by:
-
Masahiro Yamada authored
Since commit 2aedcd09 ('kbuild: suppress annoying "... is up to date." message'), $(call if_changed,...) is evaluated to "@:" when there is nothing to do. We no longer need to add "@:" after $(call if_changed,...) to suppress "... is up to date." message. Signed-off-by:
-
Masahiro Yamada authored
Obviously, the "help" should be a PHONY target. Signed-off-by:
-
Masahiro Yamada authored
As in other places, PHONY is a better fit for "modules" and "modules_install". Signed-off-by:
-
Masahiro Yamada authored
These targets are marked as PHONY. No need to add FORCE to their dependency. Signed-off-by:
-
Maxim Zhukov authored
This commit fixed resource leak at func main Signed-off-by:
Maxim Zhukov <mussitantesmortem@gmail.com> Signed-off-by:
-
- 29 Mar, 2016 8 commits
-
-
Nicolas Pitre authored
The config option to enable it all. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au>
-
Nicolas Pitre authored
Make sample modules in parallel with the rest of the kernel rather than having them built from the vmlinux target. This makes the build slightly faster, and those modules are properly considered when adjust_autoksyms.sh is executed. Signed-off-by: -
Nicolas Pitre authored
Given the list of exported symbols needed by all modules, we can create a header file containing preprocessor defines for each of those symbols. Also, when some symbols are added and/or removed from the list, we can update the time on the corresponding files used as build dependencies for those symbols. And finally, if any symbol did change state, the corresponding source files must be rebuilt. The insertion or removal of an EXPORT_SYMBOL() entry within a module may create or remove the need for another exported symbol. This is why this operation has to be repeated until the list of needed exported symbols becomes stable. Only then the final kernel and modules link take place. Signed-off-by:
-
Nicolas Pitre authored
Like with kconfig options, we now have the ability to compile in and out individual EXPORT_SYMBOL() declarations based on the content of include/generated/autoksyms.h. However we don't want the entire world to be rebuilt whenever that file is touched. Let's apply the same build dependency trick used for CONFIG_* symbols where the time stamp of empty files whose paths matching those symbols is used to trigger fine grained rebuilds. In our case the key is the symbol name passed to EXPORT_SYMBOL(). However, unlike config options, we cannot just use fixdep to parse the source code for EXPORT_SYMBOL(ksym) because several variants exist and parsing them all in a separate tool, and keeping it in synch, is not trivially maintainable. Furthermore, there are variants such as EXPORT_SYMBOL_GPL(pci_user_read_config_##size); that are instanciated via a macro for which we can't easily determine the actual exported symbol name(s) short of actually running the preprocessor on them. Storing the symbol name string in a special ELF section doesn't work for targets that output assembly or preprocessed source. So the best way is really to leverage the preprocessor by having it output actual symbol names anchored by a special sequence that can be easily filtered out. Then the list of symbols is simply fed to fixdep to be merged with the other dependencies. That implies the preprocessor is executed twice for each source file. A previous attempt relied on a warning pragma for each EXPORT_SYMBOL() instance that was filtered apart from stderr by the build system with a sed script during the actual compilation pass. Unfortunately the preprocessor/compiler diagnostic output isn't stable between versions and this solution, although more efficient, was deemed too fragile. Because of the lowercasing performed by fixdep, there might be name collisions triggering spurious rebuilds for similar symbols. But this shouldn't be a big issue in practice. (This is the case for CONFIG_* symbols and I didn't want to be different here, whatever the original reason for doing so.) To avoid needless build overhead, the exported symbol name gathering is performed only when CONFIG_TRIM_UNUSED_KSYMS is selected. Signed-off-by:
-
Nicolas Pitre authored
The generation and postprocessing of automatic dependency rules is duplicated in rule_cc_o_c, rule_as_o_S and if_changed_dep. Since this is not a trivial one-liner action, it is now abstracted under cmd_and_fixdep to simplify things and make future changes in this area easier. In the rule_cc_o_c and rule_as_o_S cases that means the order of some commands has been altered, namely fixdep and related file manipulations are executed earlier, but they didn't depend on those commands that now execute later. Signed-off-by: -
Nicolas Pitre authored
... and merge them in the list of parsed dependencies. Signed-off-by: -
Nicolas Pitre authored
Similar to include/generated/autoconf.h, include/generated/autoksyms.h will contain a list of defines for each EXPORT_SYMBOL() that we want active. The format is: #define __KSYM_<symbol_name> 1 This list will be auto-generated with another patch. For now we only include the preprocessor magic to automatically create or omit the corresponding struct kernel_symbol declaration. Given the content of include/generated/autoksyms.h may not be known in advance, an empty file is created early on to let the build proceed. Signed-off-by:
-
Nicolas Pitre authored
Kernel modules are partially linked object files with some undefined symbols that are expected to be matched with EXPORT_SYMBOL() entries from elsewhere. Each .tmp_versions/*.mod file currently contains two line of text separated by a newline character. The first line has the actual module file name while the second line has a list of object files constituting that module. Those files are parsed by modpost (scripts/mod/sumversion.c), scripts/Makefile.modpost, scripts/Makefile.modsign, etc. Only the modpost utility cares about the second line while the others retrieve only the first line. Therefore we can add a third line to record the list of undefined symbols aka required EXPORT_SYMBOL() entries for each module into that file without breaking anything. Like for the second line, symbols are separated by a blank and the list is terminated with a newline character. To avoid needless build overhead, the undefined symbols extraction is performed only when CONFIG_TRIM_UNUSED_KSYMS is selected. Signed-off-by:
-
- 26 Mar, 2016 9 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull Ceph updates from Sage Weil: "There is quite a bit here, including some overdue refactoring and cleanup on the mon_client and osd_client code from Ilya, scattered writeback support for CephFS and a pile of bug fixes from Zheng, and a few random cleanups and fixes from others" [ I already decided not to pull this because of it having been rebased recently, but ended up changing my mind after all. Next time I'll really hold people to it. Oh well. - Linus ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (34 commits) libceph: use KMEM_CACHE macro ceph: use kmem_cache_zalloc rbd: use KMEM_CACHE macro ceph: use lookup request to revalidate dentry ceph: kill ceph_get_dentry_parent_inode() ceph: fix security xattr deadlock ceph: don't request vxattrs from MDS ceph: fix mounting same fs multiple times ceph: remove unnecessary NULL check ceph: avoid updating directory inode's i_size accidentally ceph: fix race during filling readdir cache libceph: use sizeof_footer() more ceph: kill ceph_empty_snapc ceph: fix a wrong comparison ceph: replace CURRENT_TIME by current_fs_time() ceph: scattered page writeback libceph: add helper that duplicates last extent operation libceph: enable large, variable-sized OSD requests libceph: osdc->req_mempool should be backed by a slab pool libceph: make r_request msg_size calculation clearer ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linuxLinus Torvalds authored
Pull orangefs filesystem from Mike Marshall. This finally merges the long-pending orangefs filesystem, which has been much cleaned up with input from Al Viro over the last six months. From the documentation file: "OrangeFS is an LGPL userspace scale-out parallel storage system. It is ideal for large storage problems faced by HPC, BigData, Streaming Video, Genomics, Bioinformatics. Orangefs, originally called PVFS, was first developed in 1993 by Walt Ligon and Eric Blumer as a parallel file system for Parallel Virtual Machine (PVM) as part of a NASA grant to study the I/O patterns of parallel programs. Orangefs features include: - Distributes file data among multiple file servers - Supports simultaneous access by multiple clients - Stores file data and metadata on servers using local file system and access methods - Userspace implementation is easy to install and maintain - Direct MPI support - Stateless" see Documentation/filesystems/orangefs.txt for more in-depth details. * tag 'ofs-pull-tag-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: (174 commits) orangefs: fix orangefs_superblock locking orangefs: fix do_readv_writev() handling of error halfway through orangefs: have ->kill_sb() evict the VFS side of things first orangefs: sanitize ->llseek() orangefs-bufmap.h: trim unused junk orangefs: saner calling conventions for getting a slot orangefs_copy_{to,from}_bufmap(): don't pass bufmap pointer orangefs: get rid of readdir_handle_s ornagefs: ensure that truncate has an up to date inode size orangefs: move code which sets i_link to orangefs_inode_getattr orangefs: remove needless wrapper around GFP_KERNEL orangefs: remove wrapper around mutex_lock(&inode->i_mutex) orangefs: refactor inode type or link_target change detection orangefs: use new getattr for revalidate and remove old getattr orangefs: use new getattr in inode getattr and permission orangefs: use new orangefs_inode_getattr to get size in write and llseek orangefs: use new orangefs_inode_getattr to create new inodes orangefs: rename orangefs_inode_getattr to orangefs_inode_old_getattr orangefs: remove inode->i_lock wrapper orangefs: put register_chrdev immediately before register_filesystem ... -
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB bug fixes from Jon Mason: "NTB bug fixes for tasklet from spinning forever, link errors, translation window setup, NULL ptr dereference, and ntb-perf errors. Also, a modification to the driver API that makes _addr functions optional" * tag 'ntb-4.6' of git://github.com/jonmason/ntb: NTB: Remove _addr functions from ntb_hw_amd NTB: Make _addr functions optional in the API NTB: Fix incorrect clean up routine in ntb_perf NTB: Fix incorrect return check in ntb_perf ntb: fix possible NULL dereference ntb: add missing setup of translation window ntb: stop link work when we do not have memory ntb: stop tasklet from spinning forever during shutdown. ntb: perf test: fix address space confusion
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "The only new stuff which missed the first pull request is an update to the UFS driver. The rest is an assortment of bug fixes and minor tweaks which appeared recently (some are fixes for recent code and some are stuff spotted recently by the checkers or the new gcc-6 compiler [most of Arnd's stuff])" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits) scsi_common: do not clobber fixed sense information scsi: ufs: select CONFIG_NLS scsi: fc: use get/put_unaligned64 for wwn access fnic: move printk()s outside of the critical code section. qla2xxx: avoid maybe_uninitialized warning megaraid_sas: add missing curly braces in ioctl handler lpfc: fix misleading indentation scsi_transport_sas: add 'scsi_target_id' sysfs attribute scsi_dh_alua: uninitialized variable in alua_check_vpd() scsi: ufs-qcom: add printouts of testbus debug registers scsi: ufs-qcom: enable/disable the device ref clock scsi: ufs-qcom: set PA_Local_TX_LCC_Enable before link startup scsi: ufs: add device quirk delay before putting UFS rails in LPM scsi: ufs: fix leakage during link off state scsi: ufs: tune UniPro parameters to optimize hibern8 exit time scsi: ufs: handle non spec compliant bkops behaviour by device scsi: ufs: add retry for query descriptors scsi: ufs: add error recovery after DL NAC error scsi: ufs: make error handling bit faster scsi: ufs: disable vccq if it's not needed by UFS device ...
-
Linus Torvalds authored
Commit 0b81d077 ("fs crypto: move per-file encryption from f2fs tree to fs/crypto") moved the f2fs crypto files to fs/crypto/ and renamed the symbol prefixes from "f2fs_" to "fscrypt_" (and from "F2FS_" to just "FS" for preprocessor symbols). Because of the symbol renaming, it's a bit hard to see it as a file move: use git show -M30 0b81d077 to lower the rename detection to just 30% similarity and make git show the files as renamed (the header file won't be shown as a rename even then - since all it contains is symbol definitions, it looks almost completely different). Even with the renames showing as renames, the diffs are not all that easy to read, since so much is just the renames. But Eric Biggers noticed that it's not just all renames: the initialization of the xts_tweak had been broken too, using the inode number rather than the page offset. That's not right - it makes the xfs_tweak the same for all pages of each inode. It _might_ make sense to make the xfs_tweak contain both the offset _and_ the inode number, but not just the inode number. Reported-by:
Eric Biggers <ebiggers3@gmail.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Allen Hubbe authored
Kernel zero day testing warned about address space confusion. A virtual iomem address was used where a physical address is expected. The offending functions implement an optional part of the api, so they are removed. They can be added later, after testing. Fixes: a1b36958Signed-off-by:
Allen Hubbe <Allen.Hubbe@emc.com> Acked-by:
Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by:
Jon Mason <jdmason@kudzu.us>
-
Al Viro authored
* switch orangefs_remount() to taking ORANGEFS_SB(sb) instead of sb * remove from the list _before_ orangefs_unmount() - request_mutex in the latter will make sure that nothing observed in the loop in ORANGEFS_DEV_REMOUNT_ALL handling will get freed until the end of loop * on removal, keep the forward pointer and zero the back one. That way we can drop and regain the spinlock in the loop body (again, ORANGEFS_DEV_REMOUNT_ALL one) and still be able to get to the rest of the list. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Mike Marshall <hubcap@omnibond.com>
-
Al Viro authored
Error should only be returned if nothing had been read/written. Otherwise we need to report a short read/write instead. Signed-off-by:
-
