- 15 May, 2020 40 commits
-
-
Oleksij Rempel authored
A typical 100Base-T1 link should be always connected. If the link is in a shot or open state, it is a failure. In most cases, we won't be able to automatically handle this issue, but we need to log it or notify user (if possible). With this patch, the cable will be tested on "ip l s dev .. up" attempt and send ethnl notification to the user space. This patch was tested with TJA1102 PHY and "ethtool --monitor" command. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kevin Lo authored
The BCM54811 PHY shares many similarities with the already supported BCM54810 PHY but additionally requires some semi-unique configuration. Signed-off-by:
Kevin Lo <kevlo@kevlo.org> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Rahul Lakkireddy says: ==================== cxgb4: improve and tune TC-MQPRIO offload Patch 1 improves the Tx path's credit request and recovery mechanism when running under heavy load. Patch 2 adds ability to tune the burst buffer sizes of all traffic classes to improve performance for <= 1500 MTU, under heavy load. Patch 3 adds support to track EOTIDs and dump software queue contexts used by TC-MQPRIO offload. ==================== Signed-off-by: -
Rahul Lakkireddy authored
Rework and add support for dumping EOTID software context used by TC-MQPRIO. Also track number of EOTIDs in use. Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
-
Rahul Lakkireddy authored
For each traffic class, firmware handles up to 4 * MTU amount of data per burst cycle. Under heavy load, this small buffer size is a bottleneck when buffering large TSO packets in <= 1500 MTU case. Increase the burst buffer size to 8 * MTU when supported. Also, keep the driver's traffic class configuration API similar to the firmware API counterpart. Signed-off-by:
-
Rahul Lakkireddy authored
Request credit update for every half credits consumed, including the current request. Also, avoid re-trying to post packets when there are no credits left. The credit update reply via interrupt will eventually restore the credits and will invoke the Tx path again. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-05-15 The following pull-request contains BPF updates for your *net-next* tree. We've added 37 non-merge commits during the last 1 day(s) which contain a total of 67 files changed, 741 insertions(+), 252 deletions(-). The main changes are: 1) bpf_xdp_adjust_tail() now allows to grow the tail as well, from Jesper. 2) bpftool can probe CONFIG_HZ, from Daniel. 3) CAP_BPF is introduced to isolate user processes that use BPF infra and to secure BPF networking services by dropping CAP_SYS_ADMIN requirement in certain cases, from Alexei. ==================== Signed-off-by: -
DENG Qingfang authored
Allow DSA to add VLAN entries even if VLAN filtering is disabled, so enabling it will not block the traffic of existent ports in the bridge Signed-off-by:
DENG Qingfang <dqfext@gmail.com> Reviewed-by:
-
David S. Miller authored
Vlad Buslov says: ==================== Implement classifier-action terse dump mode Output rate of current upstream kernel TC filter dump implementation if relatively low (~100k rules/sec depending on configuration). This constraint impacts performance of software switch implementation that rely on TC for their datapath implementation and periodically call TC filter dump to update rules stats. Moreover, TC filter dump output a lot of static data that don't change during the filter lifecycle (filter key, specific action details, etc.) which constitutes significant portion of payload on resulting netlink packets and increases amount of syscalls necessary to dump all filters on particular Qdisc. In order to significantly improve filter dump rate this patch sets implement new mode of TC filter dump operation named "terse dump" mode. In this mode only parameters necessary to identify the filter (handle, action cookie, etc.) and data that can change during filter lifecycle (filter flags, action stats, etc.) are preserved in dump output while everything else is omitted. Userspace API is implemented using new TCA_DUMP_FLAGS tlv with only available flag value TCA_DUMP_FLAGS_TERSE. Internally, new API requires individual classifier support (new tcf_proto_ops->terse_dump() callback). Support for action terse dump is implemented in act API and don't require changing individual action implementations. The following table provides performance comparison between regular filter dump and new terse dump mode for two classifier-action profiles: one minimal config with L2 flower classifier and single gact action and another heavier config with L2+5tuple flower classifier with tunnel_key+mirred actions. Classifier-action type | dump | terse dump | X improvement | (rules/sec) | (rules/sec) | -----------------------------+-------------+-------------+--------------- L2 with gact | 141.8 | 293.2 | 2.07 L2+5tuple tunnel_key+mirred | 76.4 | 198.8 | 2.60 Benchmark details: to measure the rate tc filter dump and terse dump commands are invoked on ingress Qdisc that have one million filters configured using following commands. > time sudo tc -s filter show dev ens1f0 ingress >/dev/null > time sudo tc -s filter show terse dev ens1f0 ingress >/dev/null Value in results table is calculated by dividing 1000000 total rules by "real" time reported by time command. Setup details: 2x Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 32GB memory ==================== Reviewed-by:Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Vlad Buslov authored
Implement two basic tests to verify terse dump functionality of flower classifier: - Test that verifies that terse dump works. - Test that verifies that terse dump doesn't print filter key. Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
-
Vlad Buslov authored
Implement tcf_proto_ops->terse_dump() callback for flower classifier. Only dump handle, flags and action data in terse mode. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Vlad Buslov authored
Extend tcf_action_dump() with boolean argument 'terse' that is used to request terse-mode action dump. In terse mode only essential data needed to identify particular action (action kind, cookie, etc.) and its stats is put to resulting skb and everything else is omitted. Implement tcf_exts_terse_dump() helper in cls API that is intended to be used to request terse dump of all exts (actions) attached to the filter. Signed-off-by:
-
Vlad Buslov authored
Add new TCA_DUMP_FLAGS attribute and use it in cls API to request terse filter output from classifiers with TCA_DUMP_FLAGS_TERSE flag. This option is intended to be used to improve performance of TC filter dump when userland only needs to obtain stats and not the whole classifier/action data. Extend struct tcf_proto_ops with new terse_dump() callback that must be defined by supporting classifier implementations. Support of the options in specific classifiers and actions is implemented in following patches in the series. Signed-off-by:
-
Tobias Waldekranz authored
The assumption that a device node is associated either with the netdev's device, or the parent of that device, does not hold for all drivers. E.g. Freescale's DPAA has two layers of platform devices above the netdev. Instead, recursively walk up the tree from the netdev, allowing any parent to match against the sought after node. Signed-off-by:
Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by:
-
Daniel Borkmann authored
Alexei Starovoitov says: ==================== v6->v7: - permit SK_REUSEPORT program type under CAP_BPF as suggested by Marek Majkowski. It's equivalent to SOCKET_FILTER which is unpriv. v5->v6: - split allow_ptr_leaks into four flags. - retain bpf_jit_limit under cap_sys_admin. - fixed few other issues spotted by Daniel. v4->v5: Split BPF operations that are allowed under CAP_SYS_ADMIN into combination of CAP_BPF, CAP_PERFMON, CAP_NET_ADMIN and keep some of them under CAP_SYS_ADMIN. The user process has to have - CAP_BPF to create maps, do other sys_bpf() commands and load SK_REUSEPORT progs. Note: dev_map, sock_hash, sock_map map types still require CAP_NET_ADMIN. That could be relaxed in the future. - CAP_BPF and CAP_PERFMON to load tracing programs. - CAP_BPF and CAP_NET_ADMIN to load networking programs. (or CAP_SYS_ADMIN for backward compatibility). CAP_BPF solves three main goals: 1. provides isolation to user space processes that drop CAP_SYS_ADMIN and switch to CAP_BPF. More on this below. This is the major difference vs v4 set back from Sep 2019. 2. makes networking BPF progs more secure, since CAP_BPF + CAP_NET_ADMIN prevents pointer leaks and arbitrary kernel memory access. 3. enables fuzzers to exercise all of the verifier logic. Eventually finding bugs and making BPF infra more secure. Currently fuzzers run in unpriv. They will be able to run with CAP_BPF. The patchset is long overdue follow-up from the last plumbers conference. Comparing to what was discussed at LPC the CAP* checks at attach time are gone. For tracing progs the CAP_SYS_ADMIN check was done at load time only. There was no check at attach time. For networking and cgroup progs CAP_SYS_ADMIN was required at load time and CAP_NET_ADMIN at attach time, but there are several ways to bypass CAP_NET_ADMIN: - if networking prog is using tail_call writing FD into prog_array will effectively attach it, but bpf_map_update_elem is an unprivileged operation. - freplace prog with CAP_SYS_ADMIN can replace networking prog Consolidating all CAP checks at load time makes security model similar to open() syscall. Once the user got an FD it can do everything with it. read/write/poll don't check permissions. The same way when bpf_prog_load command returns an FD the user can do everything (including attaching, detaching, and bpf_test_run). The important design decision is to allow ID->FD transition for CAP_SYS_ADMIN only. What it means that user processes can run with CAP_BPF and CAP_NET_ADMIN and they will not be able to affect each other unless they pass FDs via scm_rights or via pinning in bpffs. ID->FD is a mechanism for human override and introspection. An admin can do 'sudo bpftool prog ...'. It's possible to enforce via LSM that only bpftool binary does bpf syscall with CAP_SYS_ADMIN and the rest of user space processes do bpf syscall with CAP_BPF isolating bpf objects (progs, maps, links) that are owned by such processes from each other. Another significant change from LPC is that the verifier checks are split into four flags. The allow_ptr_leaks flag allows pointer manipulations. The bpf_capable flag enables all modern verifier features like bpf-to-bpf calls, BTF, bounded loops, dead code elimination, etc. All the goodness. The bypass_spec_v1 flag enables indirect stack access from bpf programs and disables speculative analysis and bpf array mitigations. The bypass_spec_v4 flag disables store sanitation. That allows networking progs with CAP_BPF + CAP_NET_ADMIN enjoy modern verifier features while being more secure. Some networking progs may need CAP_BPF + CAP_NET_ADMIN + CAP_PERFMON, since subtracting pointers (like skb->data_end - skb->data) is a pointer leak, but the verifier may get smarter in the future. ==================== Signed-off-by:Daniel Borkmann <daniel@iogearbox.net>
-
Alexei Starovoitov authored
Make all test_verifier test exercise CAP_BPF and CAP_PERFMON Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Alexei Starovoitov authored
Implement permissions as stated in uapi/linux/capability.h In order to do that the verifier allow_ptr_leaks flag is split into four flags and they are set as: env->allow_ptr_leaks = bpf_allow_ptr_leaks(); env->bypass_spec_v1 = bpf_bypass_spec_v1(); env->bypass_spec_v4 = bpf_bypass_spec_v4(); env->bpf_capable = bpf_capable(); The first three currently equivalent to perfmon_capable(), since leaking kernel pointers and reading kernel memory via side channel attacks is roughly equivalent to reading kernel memory with cap_perfmon. 'bpf_capable' enables bounded loops, precision tracking, bpf to bpf calls and other verifier features. 'allow_ptr_leaks' enable ptr leaks, ptr conversions, subtraction of pointers. 'bypass_spec_v1' disables speculative analysis in the verifier, run time mitigations in bpf array, and enables indirect variable access in bpf programs. 'bypass_spec_v4' disables emission of sanitation code by the verifier. That means that the networking BPF program loaded with CAP_BPF + CAP_NET_ADMIN will have speculative checks done by the verifier and other spectre mitigation applied. Such networking BPF program will not be able to leak kernel pointers and will not be able to access arbitrary kernel memory. Signed-off-by:
-
Alexei Starovoitov authored
Split BPF operations that are allowed under CAP_SYS_ADMIN into combination of CAP_BPF, CAP_PERFMON, CAP_NET_ADMIN. For backward compatibility include them in CAP_SYS_ADMIN as well. The end result provides simple safety model for applications that use BPF: - to load tracing program types BPF_PROG_TYPE_{KPROBE, TRACEPOINT, PERF_EVENT, RAW_TRACEPOINT, etc} use CAP_BPF and CAP_PERFMON - to load networking program types BPF_PROG_TYPE_{SCHED_CLS, XDP, SK_SKB, etc} use CAP_BPF and CAP_NET_ADMIN There are few exceptions from this rule: - bpf_trace_printk() is allowed in networking programs, but it's using tracing mechanism, hence this helper needs additional CAP_PERFMON if networking program is using this helper. - BPF_F_ZERO_SEED flag for hash/lru map is allowed under CAP_SYS_ADMIN only to discourage production use. - BPF HW offload is allowed under CAP_SYS_ADMIN. - bpf_probe_write_user() is allowed under CAP_SYS_ADMIN only. CAPs are not checked at attach/detach time with two exceptions: - loading BPF_PROG_TYPE_CGROUP_SKB is allowed for unprivileged users, hence CAP_NET_ADMIN is required at attach time. - flow_dissector detach doesn't check prog FD at detach, hence CAP_NET_ADMIN is required at detach time. CAP_SYS_ADMIN is required to iterate BPF objects (progs, maps, links) via get_next_id command and convert them to file descriptor via GET_FD_BY_ID command. This restriction guarantees that mutliple tasks with CAP_BPF are not able to affect each other. That leads to clean isolation of tasks. For example: task A with CAP_BPF and CAP_NET_ADMIN loads and attaches a firewall via bpf_link. task B with the same capabilities cannot detach that firewall unless task A explicitly passed link FD to task B via scm_rights or bpffs. CAP_SYS_ADMIN can still detach/unload everything. Two networking user apps with CAP_SYS_ADMIN and CAP_NET_ADMIN can accidentely mess with each other programs and maps. Two networking user apps with CAP_NET_ADMIN and CAP_BPF cannot affect each other. CAP_NET_ADMIN + CAP_BPF allows networking programs access only packet data. Such networking progs cannot access arbitrary kernel memory or leak pointers. bpftool, bpftrace, bcc tools binaries should NOT be installed with CAP_BPF and CAP_PERFMON, since unpriv users will be able to read kernel secrets. But users with these two permissions will be able to use these tracing tools. CAP_PERFMON is least secure, since it allows kprobes and kernel memory access. CAP_NET_ADMIN can stop network traffic via iproute2. CAP_BPF is the safest from security point of view and harmless on its own. Having CAP_BPF and/or CAP_NET_ADMIN is not enough to write into arbitrary map and if that map is used by firewall-like bpf prog. CAP_BPF allows many bpf prog_load commands in parallel. The verifier may consume large amount of memory and significantly slow down the system. Existing unprivileged BPF operations are not affected. In particular unprivileged users are allowed to load socket_filter and cg_skb program types and to create array, hash, prog_array, map-in-map map types. Signed-off-by: -
Daniel Borkmann authored
In Cilium we've recently switched to make use of bpf_jiffies64() for parts of our tc and XDP datapath since bpf_ktime_get_ns() is more expensive and high-precision is not needed for our timeouts we have anyway. Our agent has a probe manager which picks up the json of bpftool's feature probe and we also use the macro output in our C programs e.g. to have workarounds when helpers are not available on older kernels. Extend the kernel config info dump to also include the kernel's CONFIG_HZ, and rework the probe_kernel_image_config() for allowing a macro dump such that CONFIG_HZ can be propagated to BPF C code as a simple define if available via config. Latter allows to have _compile- time_ resolution of jiffies <-> sec conversion in our code since all are propagated as known constants. Given we cannot generally assume availability of kconfig everywhere, we also have a kernel hz probe [0] as a fallback. Potentially, bpftool could have an integrated probe fallback as well, although to derive it, we might need to place it under 'bpftool feature probe full' or similar given it would slow down the probing process overall. Yet 'full' doesn't fit either for us since we don't want to pollute the kernel log with warning messages from bpf_probe_write_user() and bpf_trace_printk() on agent startup; I've left it out for the time being. [0] https://github.com/cilium/cilium/blob/master/bpf/cilium-probe-kernel-hz.cSigned-off-by:
Quentin Monnet <quentin@isovalent.com> Cc: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200513075849.20868-1-daniel@iogearbox.net
-
Alexei Starovoitov authored
Jesper Dangaard Brouer says: ==================== V4: - Fixup checkpatch.pl issues - Collected more ACKs V3: - Fix issue on virtio_net patch spotted by Jason Wang - Adjust name for variable in mlx5 patch - Collected more ACKs V2: - Fix bug in mlx5 for XDP_PASS case - Collected nitpicks and ACKs from mailing list V1: - Fix bug in dpaa2 XDP have evolved to support several frame sizes, but xdp_buff was not updated with this information. This have caused the side-effect that XDP frame data hard end is unknown. This have limited the BPF-helper bpf_xdp_adjust_tail to only shrink the packet. This patchset address this and add packet tail extend/grow. The purpose of the patchset is ALSO to reserve a memory area that can be used for storing extra information, specifically for extending XDP with multi-buffer support. One proposal is to use same layout as skb_shared_info, which is why this area is currently 320 bytes. When converting xdp_frame to SKB (veth and cpumap), the full tailroom area can now be used and SKB truesize is now correct. For most drivers this result in a much larger tailroom in SKB "head" data area. The network stack can now take advantage of this when doing SKB coalescing. Thus, a good driver test is to use xdp_redirect_cpu from samples/bpf/ and do some TCP stream testing. Use-cases for tail grow/extend: (1) IPsec / XFRM needs a tail extend[1][2]. (2) DNS-cache responses in XDP. (3) HAProxy ALOHA would need it to convert to XDP. (4) Add tail info e.g. timestamp and collect via tcpdump [1] http://vger.kernel.org/netconf2019_files/xfrm_xdp.pdf [2] http://vger.kernel.org/netconf2019.html Examples on howto access the tail area of an XDP packet is shown in the XDP-tutorial example[3]. [3] https://github.com/xdp-project/xdp-tutorial/blob/master/experiment01-tailgrow/ ==================== Signed-off-by:
-
Jesper Dangaard Brouer authored
Extend BPF selftest xdp_adjust_tail with grow tail tests, which is added as subtest's. The first grow test stays in same form as original shrink test. The second grow test use the newer bpf_prog_test_run_xattr() calls, and does extra checking of data contents. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
Current selftest for BPF-helper xdp_adjust_tail only shrink tail. Make it more clear that this is a shrink test case. Signed-off-by:
-
Jesper Dangaard Brouer authored
Update the memory requirements, when adding xdp.frame_sz in BPF test_run function bpf_prog_test_run_xdp() which e.g. is used by XDP selftests. Specifically add the expected reserved tailroom, but also allocated a larger memory area to reflect that XDP frames usually comes in this format. Limit the provided packet data size to 4096 minus headroom + tailroom, as this also reflect a common 3520 bytes MTU limit with XDP. Note that bpf_test_init already use a memory allocation method that clears memory. Thus, this already guards against leaking uninit kernel memory. Signed-off-by:
-
Jesper Dangaard Brouer authored
Clearing memory of tail when grow happens, because it is too easy to write a XDP_PASS program that extend the tail, which expose this memory to users that can run tcpdump. Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/158945349039.97035.5262100484553494.stgit@firesoul
-
Jesper Dangaard Brouer authored
Finally, after all drivers have a frame size, allow BPF-helper bpf_xdp_adjust_tail() to grow or extend packet size at frame tail. Remember that helper/macro xdp_data_hard_end have reserved some tailroom. Thus, this helper makes sure that the BPF-prog don't have access to this tailroom area. V2: Remove one chicken check and use WARN_ONCE for other Signed-off-by:
-
Jesper Dangaard Brouer authored
The mlx5 driver have multiple memory models, which are also changed according to whether a XDP bpf_prog is attached. The 'rx_striding_rq' setting is adjusted via ethtool priv-flags e.g.: # ethtool --set-priv-flags mlx5p2 rx_striding_rq off On the general case with 4K page_size and regular MTU packet, then the frame_sz is 2048 and 4096 when XDP is enabled, in both modes. The info on the given frame size is stored differently depending on the RQ-mode and encoded in a union in struct mlx5e_rq union wqe/mpwqe. In rx striding mode rq->mpwqe.log_stride_sz is either 11 or 12, which corresponds to 2048 or 4096 (MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ). In non-striding mode (MLX5_WQ_TYPE_CYCLIC) the frag_stride is stored in rq->wqe.info.arr[0].frag_stride, for the first fragment, which is what the XDP case cares about. To reduce effect on fast-path, this patch determine the frame_sz at setup time, to avoid determining the memory model runtime. Variable is named frame0_sz to make it clear that this is only the frame size of the first fragment. This mlx5 driver does a DMA-sync on XDP_TX action, but grow is safe as it have done a DMA-map on the entire PAGE_SIZE. The driver also already does a XDP length check against sq->hw_mtu on the possible XDP xmit paths mlx5e_xmit_xdp_frame() + mlx5e_xmit_xdp_frame_mpwqe(). V3+4: Change variable name first_frame_sz to frame0_sz V2: Fix that frag_size need to be recalc before creating SKB. Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Link: https://lore.kernel.org/bpf/158945348021.97035.12295039384250022883.stgit@firesoul
-
Jesper Dangaard Brouer authored
Intel drivers implement native AF_XDP zerocopy in separate C-files, that have its own invocation of bpf_prog_run_xdp(). The setup of xdp_buff is also handled in separately from normal code path. This patch update XDP frame_sz for AF_XDP zerocopy drivers i40e, ice and ixgbe, as the code changes needed are very similar. Introduce a helper function xsk_umem_xdp_frame_sz() for calculating frame size. Signed-off-by:
Björn Töpel <bjorn.topel@intel.com> Cc: intel-wired-lan@lists.osuosl.org Cc: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/158945347511.97035.8536753731329475655.stgit@firesoul
-
Jesper Dangaard Brouer authored
This driver uses different memory models depending on PAGE_SIZE at compile time. For PAGE_SIZE 4K it uses page splitting, meaning for normal MTU frame size is 2048 bytes (and headroom 192 bytes). For larger MTUs the driver still use page splitting, by allocating order-1 pages (8192 bytes) for RX frames. For PAGE_SIZE larger than 4K, driver instead advance its rx_buffer->page_offset with the frame size "truesize". For XDP frame size calculations, this mean that in PAGE_SIZE larger than 4K mode the frame_sz change on a per packet basis. For the page split 4K PAGE_SIZE mode, xdp.frame_sz is more constant and can be updated once outside the main NAPI loop. The default setting in the driver uses build_skb(), which provides the necessary headroom and tailroom for XDP-redirect in RX-frame (in both modes). There is one complication, which is legacy-rx mode (configurable via ethtool priv-flags). There are zero headroom in this mode, which is a requirement for XDP-redirect to work. The conversion to xdp_frame (convert_to_xdp_frame) will detect this insufficient space, and xdp_do_redirect() call will fail. This is deemed acceptable, as it allows other XDP actions to still work in legacy-mode. In legacy-mode + larger PAGE_SIZE due to lacking tailroom, we also accept that xdp_adjust_tail shrink doesn't work. Signed-off-by:
-
Jesper Dangaard Brouer authored
This driver uses different memory models depending on PAGE_SIZE at compile time. For PAGE_SIZE 4K it uses page splitting, meaning for normal MTU frame size is 2048 bytes (and headroom 192 bytes). For larger MTUs the driver still use page splitting, by allocating order-1 pages (8192 bytes) for RX frames. For PAGE_SIZE larger than 4K, driver instead advance its rx_buffer->page_offset with the frame size "truesize". For XDP frame size calculations, this mean that in PAGE_SIZE larger than 4K mode the frame_sz change on a per packet basis. For the page split 4K PAGE_SIZE mode, xdp.frame_sz is more constant and can be updated once outside the main NAPI loop. The default setting in the driver uses build_skb(), which provides the necessary headroom and tailroom for XDP-redirect in RX-frame (in both modes). There is one complication, which is legacy-rx mode (configurable via ethtool priv-flags). There are zero headroom in this mode, which is a requirement for XDP-redirect to work. The conversion to xdp_frame (convert_to_xdp_frame) will detect this insufficient space, and xdp_do_redirect() call will fail. This is deemed acceptable, as it allows other XDP actions to still work in legacy-mode. In legacy-mode + larger PAGE_SIZE due to lacking tailroom, we also accept that xdp_adjust_tail shrink doesn't work. Signed-off-by:
-
Jesper Dangaard Brouer authored
This patch mirrors the changes to ixgbe in previous patch. This VF driver doesn't support XDP_REDIRECT, but correct tailroom is still necessary for BPF-helper xdp_adjust_tail. In legacy-mode + larger PAGE_SIZE, due to lacking tailroom, we accept that xdp_adjust_tail shrink doesn't work. Signed-off-by:
-
Jesper Dangaard Brouer authored
This driver uses different memory models depending on PAGE_SIZE at compile time. For PAGE_SIZE 4K it uses page splitting, meaning for normal MTU frame size is 2048 bytes (and headroom 192 bytes). For larger MTUs the driver still use page splitting, by allocating order-1 pages (8192 bytes) for RX frames. For PAGE_SIZE larger than 4K, driver instead advance its rx_buffer->page_offset with the frame size "truesize". For XDP frame size calculations, this mean that in PAGE_SIZE larger than 4K mode the frame_sz change on a per packet basis. For the page split 4K PAGE_SIZE mode, xdp.frame_sz is more constant and can be updated once outside the main NAPI loop. The default setting in the driver uses build_skb(), which provides the necessary headroom and tailroom for XDP-redirect in RX-frame (in both modes). There is one complication, which is legacy-rx mode (configurable via ethtool priv-flags). There are zero headroom in this mode, which is a requirement for XDP-redirect to work. The conversion to xdp_frame (convert_to_xdp_frame) will detect this insufficient space, and xdp_do_redirect() call will fail. This is deemed acceptable, as it allows other XDP actions to still work in legacy-mode. In legacy-mode + larger PAGE_SIZE due to lacking tailroom, we also accept that xdp_adjust_tail shrink doesn't work. Signed-off-by:
-
Jesper Dangaard Brouer authored
The ixgbe driver have another memory model when compiled on archs with PAGE_SIZE above 4096 bytes. In this mode it doesn't split the page in two halves, but instead increment rx_buffer->page_offset by truesize of packet (which include headroom and tailroom for skb_shared_info). This is done correctly in ixgbe_build_skb(), but in ixgbe_rx_buffer_flip which is currently only called on XDP_TX and XDP_REDIRECT, it forgets to add the tailroom for skb_shared_info. This breaks XDP_REDIRECT, for veth and cpumap. Fix by adding size of skb_shared_info tailroom. Maintainers notice: This fix have been queued to Jeff. Fixes: 64530739 ("ixgbe: add initial support for xdp redirect") Signed-off-by:
-
Jesper Dangaard Brouer authored
The virtio_net driver is running inside the guest-OS. There are two XDP receive code-paths in virtio_net, namely receive_small() and receive_mergeable(). The receive_big() function does not support XDP. In receive_small() the frame size is available in buflen. The buffer backing these frames are allocated in add_recvbuf_small() with same size, except for the headroom, but tailroom have reserved room for skb_shared_info. The headroom is encoded in ctx pointer as a value. In receive_mergeable() the frame size is more dynamic. There are two basic cases: (1) buffer size is based on a exponentially weighted moving average (see DECLARE_EWMA) of packet length. Or (2) in case virtnet_get_headroom() have any headroom then buffer size is PAGE_SIZE. The ctx pointer is this time used for encoding two values; the buffer len "truesize" and headroom. In case (1) if the rx buffer size is underestimated, the packet will have been split over more buffers (num_buf info in virtio_net_hdr_mrg_rxbuf placed in top of buffer area). If that happens the XDP path does a xdp_linearize_page operation. V3: Adjust frame_sz in receive_mergeable() case, spotted by Jason Wang. The code is really hard to follow, so some hints to reviewers. The receive_mergeable() case gets frames that were allocated in add_recvbuf_mergeable() which uses headroom=virtnet_get_headroom(), and 'buf' ptr is advanced this headroom. The headroom can only be 0 or VIRTIO_XDP_HEADROOM, as virtnet_get_headroom is really simple: static unsigned int virtnet_get_headroom(struct virtnet_info *vi) { return vi->xdp_queue_pairs ? VIRTIO_XDP_HEADROOM : 0; } As frame_sz is an offset size from xdp.data_hard_start, reviewers should notice how this is calculated in receive_mergeable(): int offset = buf - page_address(page); [...] data = page_address(xdp_page) + offset; xdp.data_hard_start = data - VIRTIO_XDP_HEADROOM + vi->hdr_len; The calculated offset will always be VIRTIO_XDP_HEADROOM when reaching this code. Thus, xdp.data_hard_start will be page-start address plus vi->hdr_len. Given this xdp.frame_sz need to be reduced with vi->hdr_len size. IMHO a followup patch should cleanup this code to make it easier to maintain and understand, but it is outside the scope of this patchset. Signed-off-by:Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/bpf/158945344436.97035.9445115070189151680.stgit@firesoul
-
Jesper Dangaard Brouer authored
In vhost_net_build_xdp() the 'buf' that gets queued via an xdp_buff have embedded a struct tun_xdp_hdr (located at xdp->data_hard_start) which contains the buffer length 'buflen' (with tailroom for skb_shared_info). Also storing this buflen in xdp->frame_sz, does not obsolete struct tun_xdp_hdr, as it also contains a struct virtio_net_hdr with other information. Signed-off-by:
-
Jesper Dangaard Brouer authored
The tun driver have two code paths for running XDP (bpf_prog_run_xdp). In both cases 'buflen' contains enough tailroom for skb_shared_info. Signed-off-by:
-
Jesper Dangaard Brouer authored
The netronome nfp driver use PAGE_SIZE when xdp_prog is set, but xdp.data_hard_start begins at offset NFP_NET_RX_BUF_HEADROOM. Thus, adjust for this when setting xdp.frame_sz, as it counts from data_hard_start. When doing XDP_TX this driver is smart and instead of a full DMA-map does a DMA-sync on with packet length. As xdp_adjust_tail can now grow packet length, add checks to make sure that grow size is within the DMA-mapped size. Signed-off-by:
-
Jesper Dangaard Brouer authored
To help reviewers these are the defines related to RCV_FRAG_LEN #define DMA_BUFFER_LEN 1536 /* In multiples of 128bytes */ #define RCV_FRAG_LEN (SKB_DATA_ALIGN(DMA_BUFFER_LEN + NET_SKB_PAD) + \ SKB_DATA_ALIGN(sizeof(struct skb_shared_info))) Signed-off-by:
-
Jesper Dangaard Brouer authored
The mlx4 drivers size of memory backing the RX packet is stored in frag_stride. For XDP mode this will be PAGE_SIZE (normally 4096). For normal mode frag_stride is 2048. Also adjust MLX4_EN_MAX_XDP_MTU to take tailroom into account. Signed-off-by:
-
Jesper Dangaard Brouer authored
Frame size ENA_PAGE_SIZE is limited to 16K on systems with larger PAGE_SIZE than 16K. Change ENA_XDP_MAX_MTU to also take into account the reserved tailroom. Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Cc: Arthur Kiyanovski <akiyano@amazon.com> Link: https://lore.kernel.org/bpf/158945341384.97035.907403694833419456.stgit@firesoul
-
Jesper Dangaard Brouer authored
The driver code cpsw.c and cpsw_new.c both use page_pool with default order-0 pages or their RX-pages. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Link: https://lore.kernel.org/bpf/158945340875.97035.752144756428532878.stgit@firesoul
-
