- 06 Jan, 2020 26 commits
-
-
Amit Cohen authored
The check drops packets if they need to be routed and their destination IP is link-local, i.e., belongs to 169.254.0.0/16 address range. Disable the check since the kernel forwards such packets and does not drop them. Signed-off-by:
Amit Cohen <amitc@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amit Cohen authored
Add test case to check that packets are not dropped when they need to be routed and their source IP equals to their destination IP. Signed-off-by:
-
Amit Cohen authored
The check drops packets if they need to be routed and their source IP equals to their destination IP. Disable the check since the kernel forwards such packets and does not drop them. Signed-off-by:
-
Amit Cohen authored
Add test case to check that packets are not dropped when they need to be routed and their multicast MAC mismatched to their multicast destination IP. i.e., destination IP is multicast and * for IPV4: DMAC != {01-00-5E-0 (25 bits), DIP[22:0]} * for IPV6: DMAC != {33-33-0 (16 bits), DIP[31:0]} Signed-off-by: -
Amit Cohen authored
The check drops packets if they need to be routed and their multicast MAC mismatched to their multicast destination IP. For IPV4: DMAC is mismatched if it is different from {01-00-5E-0 (25 bits), DIP[22:0]} For IPV6: DMAC is mismatched if it is different from {33-33-0 (16 bits), DIP[31:0]} Disable the check since the kernel forwards such packets and does not drop them. Signed-off-by: -
Amit Cohen authored
Add test case to check that packets are not dropped when they need to be routed and their source IP in class E, (i.e., 240.0.0.0 – 255.255.255.254). Signed-off-by:
-
Amit Cohen authored
The check drops packets if they need to be routed and their source IP is from class E, i.e., belongs to 240.0.0.0/4 address range, but different from 255.255.255.255. Disable the check since the kernel forwards such packets and does not drop them. Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: misc updates for -net-next This series includes some misc updates for the HNS3 ethernet driver. [patch 1] adds trace events support. [patch 2] re-organizes TQP's vector handling. [patch 3] renames the name of TQP vector. [patch 4] rewrites a log in the hclge_map_ring_to_vector(). [patch 5] modifies the name of misc IRQ vector. [patch 6] handles the unexpected speed 0 return from HW. [patch 7] replaces an unsuitable variable type. [patch 8] modifies an unsuitable reset level for HW error. ==================== Signed-off-by: -
Huazhong Tan authored
According to hardware user manual, when hardware reports error 'roc_pkt_without_key_port', the driver should assert function reset to do the recovery. So this patch uses HNAE3_FUNC_RESET to replace HNAE3_GLOBAL_RESET. Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Huazhong Tan authored
In hclge_inform_reset_assert_to_vf(), variable reset_type(enum type) will be copied into msg_data whose size is 2 bytes. Currently, hip08 is a little-endian machine, so the lower two bytes of reset_type will be copied to msg_data. But when running on a big-endian machine, msg_data will have a wrong value(the higher two bytes of reset_type). So this patch modifies the type of reset_type to u16, and adds a build check in case enum hnae3_reset_type has value larger than U16_MAX. Signed-off-by:
-
Guojia Liao authored
In some case, the MAC speed get from hardware maybe 0, it should not be set to mac->speed. Signed-off-by:
Guojia Liao <liaoguojia@huawei.com> Signed-off-by:
-
Yonglong Liu authored
The misc IRQ of all the devices have the same name, so it's hard to find the right misc IRQ of the device. This patch modifies the misc IRQ names as "hclge/hclgevf"-misc- "pci name". And now the IRQ name is not related to net device name anymore, so change the HNAE3_INT_NAME_LEN to 32 bytes, and that is enough. Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
-
Yonglong Liu authored
When the returned vector_id less than 0, the message should print out the vector who is getting vector index fail. So this patch replaces vector_id with vector, and re-format the message. Signed-off-by:
-
Yonglong Liu authored
When rename the net devices, the IRQ number can not be fetched by the net device name, because the driver request the IRQ resources only when the vector resource changed, and the rename operation did not change the vector resources, so the IRQ name keeps the previous net device name. So this patch modifies the name of the TQP IRQ as "pci driver name"-"pci name"-"TxRx"-"index". Signed-off-by:
-
Yonglong Liu authored
To prevent loss user's IRQ affinity configuration when DOWN, this patch moves out release/request operation of the vector handle from net DOWN/UP, just do it when vector resource changes. Signed-off-by:
-
Yunsheng Lin authored
This adds trace support for HNS3 driver. It also declares some events which could be used to trace the events when a TX/RX BD is processed, and other events which are related to the processing of sk_buff, such as TSO, GRO. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Convert Felix DSA switch to PHYLINK Unlike most other conversions, this one is not by far a trivial one, and should be seen as "Layerscape PCS meets PHYLINK". Actually, the PCS doesn't need a lot of hand-holding and most of our other devices 'just work' (this one included) without any sort of operating system awareness, just an initialization procedure done typically in the bootloader. Our issues start when the PCS stops from "just working", and that is where PHYLINK comes in handy. The PCS is not specific to the Vitesse / Microsemi / Microchip switching core at all. Variations of this SerDes/PCS design can also be found on DPAA1 and DPAA2 hardware. The main idea of the abstraction provided is that the PCS looks so much like a PHY device, that we model it as an actual PHY device and run the generic PHY functions on it, where appropriate. The 4xSGMII, QSGMII and QSXGMII modes are fairly straightforward. The SerDes protocol which the driver calls 2500Base-X mode (a misnomer) is more interesting. There is a description of how it works and what can be done with it in patch 9/9 (in a comment above vsc9959_pcs_init_2500basex). In short, it is a fixed speed protocol with no auto-negotiation whatsoever. From my research of the SGMII-2500 patent [1], it has nothing to do with SGMII-2500. That one: * does not define any change to the AN base page compared to plain 10/100/1000 SGMII. This implies that the 2500 speed is not negotiable, but the other speeds are. In our case, when the SerDes is configured for this protocol it's configured for good, there's no going back to SGMII. * runs at a higher base frequency than regular SGMII. So SGMII-2500 operating at 1000 Mbps wouldn't interoperate with plain SGMII at 1000 Mbps. Strange, but ok.. * Emulates lower link speeds than 2500 by duplicating the codewords twice, then thrice, then twice again etc (2.5/25/250 times on average). The Layerscape PCS doesn't do that (it is fixed at 2500 Mbaud). But on the other hand it isn't completely compatible with Base-X either, since it doesn't do 802.3z / clause 37 auto negotiation (flow control, local/remote fault etc). It is compatible with 2500Base-X without in-band AN, and that is exactly how we decided to expose it (this is actually similar to what others do). For SGMII and USXGMII, the driver is using the PHYLINK 'managed = "in-band-status"' DTS binding to figure out whether in-band AN is expected to be enabled in the PCS or not. It is expected that the attached PHY follows suite, but there is a gap here: the PHY driver does not react to this setting, so only one of "AN on" and "AN off" works on any particular PHY, even though that PHY might support bypassing the SGMII AN process, as is the case on the VSC8514 PHY present on the LS1028A-RDB board. A separate series will be sent to propose a way to deal with that. I dropped the Ocelot PHYLINK conversion because: * I don't have VSC7514 hardware anyway * The hardware is so different in this regard that there's almost nothing to share anyway. Changes in v5: - Added the register write to DEV_CLOCK_CFG back in felix_phylink_mac_config in patch 9/9. Changes in v4: - This is mostly a resend of v3, with the only notable change that I've dropped the PHY core patches for in_band_autoneg and I'll propose them independently. v1 series: https://www.spinics.net/lists/netdev/msg613869.html RFC v2 series: https://www.spinics.net/lists/netdev/msg620128.html v3 series: https://www.spinics.net/lists/netdev/msg622060.html v4 series: https://www.spinics.net/lists/netdev/msg622606.html [0]: https://www.spinics.net/lists/netdev/msg613869.html [1]: https://patents.google.com/patent/US7356047B1/en ==================== Signed-off-by:
-
Vladimir Oltean authored
Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by:Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
Since the Felix DSA driver is implementing its own PHYLINK instance due to SoC differences, it needs access to the few registers that are common, mainly for flow control. Signed-off-by:
-
Vladimir Oltean authored
The Ocelot switchdev driver and the Felix DSA one need it for different reasons. Felix (or at least the VSC9959 instantiation in NXP LS1028A) is integrated with the traditional NXP Layerscape PCS design which does not support runtime configuration of SerDes protocol. So it needs to pre-validate the phy-mode from the device tree and prevent PHYLINK from attempting to change it. For this, it needs to cache it in a private variable. Signed-off-by:
-
Vladimir Oltean authored
This increases the MDIO hold time to 5 enet_clk cycles from the previous value of 0. This is actually the out-of-reset value, that the driver was previously overwriting with 0. Zero worked for the external MDIO, but breaks communication with the internal MDIO buses on which the PCS of ENETC SI's and Felix switch are found. Signed-off-by:
-
Claudiu Manoil authored
Within the LS1028A SoC, the register map for the ENETC MDIO controller is instantiated a few times: for the central (external) MDIO controller, for the internal bus of each standalone ENETC port, and for the internal bus of the Felix switch. Refactoring is needed to support multiple MDIO buses from multiple drivers. The enetc_hw structure is made an opaque type and a smaller enetc_mdio_priv is created. 'mdio_base' - MDIO registers base address - is being parameterized, to be able to work with different MDIO register bases. The ENETC MDIO bus operations are exported from the fsl-enetc-mdio kernel object, the same that registers the central MDIO controller (the dedicated PF). The ENETC main driver has been changed to select it, and use its exported helpers to further register its private MDIO bus. The DSA Felix driver will do the same. Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
The DSA drivers that implement .phylink_mac_link_state should normally register an interrupt for the PCS, from which they should call phylink_mac_change(). However not all switches implement this, and those who don't should set this flag in dsa_switch in the .setup callback, so that PHYLINK will poll for a few ms until the in-band AN link timer expires and the PCS state settles. Signed-off-by:
-
Vladimir Oltean authored
Some MAC PCS blocks are unable to provide interrupts when their status changes. As we already have support in phylink for polling status, use this to provide a hook for MACs to enable polling mode. The patch idea was picked up from Russell King's suggestion on the macb phylink patch thread here [0] but the implementation was changed. Instead of introducing a new phylink_start_poll() function, which would make the implementation cumbersome for common PHYLINK implementations for multiple types of devices, like DSA, just add a boolean property to the phylink_config structure, which is just as backwards-compatible. https://lkml.org/lkml/2019/12/16/603Suggested-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Vladimir Oltean authored
QSGMII is a SerDes protocol clocked at 5 Gbaud (4 times higher than SGMII which is clocked at 1.25 Gbaud), with the same 8b/10b encoding and some extra symbols for synchronization. Logically it offers 4 SGMII interfaces multiplexed onto the same physical lanes. Each MAC PCS has its own in-band AN process with the system side of the QSGMII PHY, which is identical to the regular SGMII AN process. So allow QSGMII as a valid in-band AN mode, since it is no different from software perspective from regular SGMII. Signed-off-by:
-
Vladimir Oltean authored
Typically a MAC PCS auto-configures itself after it receives the negotiated copper-side link settings from the PHY, but some MAC devices are more special and need manual interpretation of the SGMII AN result. In other cases, the PCS exposes the entire tx_config_reg base page as it is transmitted on the wire during auto-negotiation, so it makes sense to be able to decode the equivalent lp_advertised bit mask from the raw u16 (of course, "lp" considering the PCS to be the local PHY). Therefore, add the bit definitions for the SGMII registers 4 and 5 (local device ability, link partner ability), as well as a link_mode conversion helper that can be used to feed the AN results into phy_resolve_aneg_linkmode. Signed-off-by:
-
- 05 Jan, 2020 14 commits
-
-
David S. Miller authored
Vladimir Oltean says: ==================== Improvements to the DSA deferred xmit After the feedback received on v1: https://www.spinics.net/lists/netdev/msg622617.html I've decided to move the deferred xmit implementation completely within the sja1105 driver. The executive summary for this series is the same as it was for v1 (better for everybody): - For those who don't use it, thanks to one less assignment in the hotpath (and now also thanks to less code in the DSA core) - For those who do, by making its scheduling more amenable and moving it outside the generic workqueue (since it still deals with packet hotpath, after all) There are some simplification (1/3) and cosmetic (3/3) patches in the areas next to the code touched by the main patch (2/3). ==================== Signed-off-by:
-
Vladimir Oltean authored
This is a cosmetic patch that makes the dp, tx_vid, queue_mapping and pcp local variable definitions a bit closer in length, so they don't look like an eyesore as much. The 'ds' variable is not used otherwise, except for ds->dp. Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
There are 3 things that are wrong with the DSA deferred xmit mechanism: 1. Its introduction has made the DSA hotpath ever so slightly more inefficient for everybody, since DSA_SKB_CB(skb)->deferred_xmit needs to be initialized to false for every transmitted frame, in order to figure out whether the driver requested deferral or not (a very rare occasion, rare even for the only driver that does use this mechanism: sja1105). That was necessary to avoid kfree_skb from freeing the skb. 2. Because L2 PTP is a link-local protocol like STP, it requires management routes and deferred xmit with this switch. But as opposed to STP, the deferred work mechanism needs to schedule the packet rather quickly for the TX timstamp to be collected in time and sent to user space. But there is no provision for controlling the scheduling priority of this deferred xmit workqueue. Too bad this is a rather specific requirement for a feature that nobody else uses (more below). 3. Perhaps most importantly, it makes the DSA core adhere a bit too much to the NXP company-wide policy "Innovate Where It Doesn't Matter". The sja1105 is probably the only DSA switch that requires some frames sent from the CPU to be routed to the slave port via an out-of-band configuration (register write) rather than in-band (DSA tag). And there are indeed very good reasons to not want to do that: if that out-of-band register is at the other end of a slow bus such as SPI, then you limit that Ethernet flow's throughput to effectively the throughput of the SPI bus. So hardware vendors should definitely not be encouraged to design this way. We do _not_ want more widespread use of this mechanism. Luckily we have a solution for each of the 3 issues: For 1, we can just remove that variable in the skb->cb and counteract the effect of kfree_skb with skb_get, much to the same effect. The advantage, of course, being that anybody who doesn't use deferred xmit doesn't need to do any extra operation in the hotpath. For 2, we can create a kernel thread for each port's deferred xmit work. If the user switch ports are named swp0, swp1, swp2, the kernel threads will be named swp0_xmit, swp1_xmit, swp2_xmit (there appears to be a 15 character length limit on kernel thread names). With this, the user can change the scheduling priority with chrt $(pidof swp2_xmit). For 3, we can actually move the entire implementation to the sja1105 driver. So this patch deletes the generic implementation from the DSA core and adds a new one, more adequate to the requirements of PTP TX timestamping, in sja1105_main.c. Suggested-by:
-
Vladimir Oltean authored
I finally found out how the 4 management route slots are supposed to be used, but.. it's not worth it. The description from the comment I've just deleted in this commit is still true: when more than 1 management slot is active at the same time, the switch will match frames incoming [from the CPU port] on the lowest numbered management slot that matches the frame's DMAC. My issue was that one was not supposed to statically assign each port a slot. Yes, there are 4 slots and also 4 non-CPU ports, but that is a mere coincidence. Instead, the switch can be used like this: every management frame gets a slot at the right of the most recently assigned slot: Send mgmt frame 1 through S0: S0 x x x Send mgmt frame 2 through S1: S0 S1 x x Send mgmt frame 3 through S2: S0 S1 S2 x Send mgmt frame 4 through S3: S0 S1 S2 S3 The difference compared to the old usage is that the transmission of frames 1-4 doesn't need to wait until the completion of the management route. It is safe to use a slot to the right of the most recently used one, because by protocol nobody will program a slot to your left and "steal" your route towards the correct egress port. So there is a potential throughput benefit here. But mgmt frame 5 has no more free slot to use, so it has to wait until _all_ of S0, S1, S2, S3 are full, in order to use S0 again. And that's actually exactly the problem: I was looking for something that would bring more predictable transmission latency, but this is exactly the opposite: 3 out of 4 frames would be transmitted quicker, but the 4th would draw the short straw and have a worse worst-case latency than before. Useless. Things are made even worse by PTP TX timestamping, which is something I won't go deeply into here. Suffice to say that the fact there is a driver-level lock on the SPI bus offsets any potential throughput gains that parallelism might bring. So there's no going back to the multi-slot scheme, remove the "mgmt_slot" variable from sja1105_port and the dummy static assignment made at probe time. While passing by, also remove the assignment to casc_port altogether. Don't pretend that we support cascaded setups. Signed-off-by:
-
David S. Miller authored
Russell King says: ==================== Fix 10G PHY interface types Recent discussion has revealed that our current usage of the 10GKR phy_interface_t is not correct. This is based on a misunderstanding caused in part by the various specifications being difficult to obtain. Now that a better understanding has been reached, we ought to correct this. This series introduce PHY_INTERFACE_MODE_10GBASER to replace the existing usage of 10GKR mode, and document their differences in the phylib documentation. Then switch PHY, SFP/phylink, the Marvell PP2 network driver, and its associated comphy driver over to use the correct interface mode. None of the existing platform usage was actually using 10GBASE-KR. In order to maintain compatibility with existing DT files, arrange for the Marvell PP2 driver to rewrite the phy interface mode; this allows other drivers to adopt correct behaviour w.r.t whether the 10G connection conforms to the backplane 10GBASE-KR protocol vs normal 10GBASE-R protocol. After applying these locally to net-next I've validated that the only places which mention the old PHY_INTERFACE_MODE_10GKR definition are: Documentation/networking/phy.rst:``PHY_INTERFACE_MODE_10GKR`` drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c: if (phy_mode == PHY_INTERFACE_MODE_10GKR) drivers/net/phy/aquantia_main.c: phydev->interface = PHY_INTERFACE_MODE_10GKR; drivers/net/phy/aquantia_main.c: phydev->interface != PHY_INTERFACE_MODE_10GKR && include/linux/phy.h: PHY_INTERFACE_MODE_10GKR, include/linux/phy.h: case PHY_INTERFACE_MODE_10GKR: which is as expected. The only users of "10gbase-kr" in DT are: arch/arm64/boot/dts/marvell/armada-7040-db.dts: phy-mode = "10gbase-kr"; arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts: phy-mode = "10gbase-kr"; arch/arm64/boot/dts/marvell/armada-8040-db.dts: phy-mode = "10gbase-kr"; arch/arm64/boot/dts/marvell/armada-8040-db.dts: phy-mode = "10gbase-kr"; arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts: phy-mode = "10gbase-kr"; arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts: phy-mode = "10gbase-kr"; arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts: phy-mode = "10gbase-kr";arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts: phy-mode = "10gbase-kr";arch/arm64/boot/dts/marvell/cn9130-db.dts: phy-mode = "10gbase-kr"; arch/arm64/boot/dts/marvell/cn9131-db.dts: phy-mode = "10gbase-kr"; arch/arm64/boot/dts/marvell/cn9132-db.dts: phy-mode = "10gbase-kr"; which all use the mvpp2 driver, and these will be updated in a separate patch to be submitted in the following kernel cycle. v2: add comment to mvpp2 driver. ==================== Signed-off-by: -
Russell King authored
Switch network drivers, phy drivers, and SFP/phylink over to use the more correct 10GBASE-R, rather than 10GBASE-KR. 10GBASE-KR is backplane ethernet, which is 10GBASE-R with autonegotiation on top, which our current usage on the affected platforms does not have. The only remaining user of PHY_INTERFACE_MODE_10GKR is the Aquantia PHY, which has a separate mode for 10GBASE-KR. For Marvell mvpp2, we detect 10GBASE-KR, and rewrite it to 10GBASE-R for compatibility with existing DT - this is the only network driver at present that makes use of PHY_INTERFACE_MODE_10GKR. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Russell King authored
Recent discussion has revealed that the use of PHY_INTERFACE_MODE_10GKR is incorrect. Add a 10GBASE-R definition, document both the -R and -KR versions, and the fact that 10GKR was used incorrectly. Reviewed-by:
-
David S. Miller authored
Shannon Nelson says: ==================== ionic: add sriov support Set up the basic support for enabling SR-IOV devices in the ionic driver. Since most of the management work happens in the NIC firmware, the driver becomes mostly a pass-through for the network stack commands that want to control and configure the VFs. v4: changed "vf too big" checks to use pci_num_vf() changed from vf[] array of pointers of individually allocated vf structs to single allocated vfs[] array of vf structs added clean up of vfs[] on probe fail added setup for vf stats dma v3: added check in probe for pre-existing VFs split out the alloc and dealloc of vf structs to better deal with pre-existing VFs (left enabled on remove) restored the checks for vf too big because of a potential case where VFs are already enabled but driver failed to alloc the vf structs v2: use pci_num_vf() and kcalloc() remove checks for vf too big add locking for the VF operations disable VFs in ionic_remove() if they are still running ==================== Signed-off-by: -
Shannon Nelson authored
Add the netdev ops for managing VFs. Since most of the management work happens in the NIC firmware, the driver becomes mostly a pass-through for the network stack commands that want to control and configure the VFs. We also tweak ionic_station_set() a little to allow for the VFs that start off with a zero'd mac address. Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Shannon Nelson authored
Adds new AdminQ calls and their related structs for supporting PF controls on VFs: CMD_OPCODE_VF_GETATTR CMD_OPCODE_VF_SETATTR Signed-off-by: -
Krzysztof Kozlowski authored
Fix up inconsistent usage of upper and lowercase letters in "Samsung" name. "SAMSUNG" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
David S. Miller authored
Dmitry Torokhov says: ==================== net: phy: switch to using fwnode_gpiod_get_index This series switches phy drivers form using fwnode_get_named_gpiod() and gpiod_get_from_of_node() that are scheduled to be removed in favor of fwnode_gpiod_get_index() that behaves more like standard gpiod_get_index() and will potentially handle secondary software nodes in cases we need to augment platform firmware. Now that the dependencies have been merged into networking tree the patches can be applied there as well. v3: - rebased on top of net-next v2: - rebased on top of Linus' W devel branch - added David's ACKs ==================== Signed-off-by: -
Dmitry Torokhov authored
gpiod_get_from_of_node() is being retired in favor of [devm_]fwnode_gpiod_get_index(), that behaves similar to [devm_]gpiod_get_index(), but can work with arbitrary firmware node. It will also be able to support secondary software nodes. Let's switch this driver over. Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
If we fail to locate GPIO for any reason other than deferral or not-found-GPIO, we try to print device tree node info, however if might be freed already as we called of_node_put() on it. Acked-by:
-
