- 27 May, 2010 40 commits
-
-
jan Blunck authored
Do not use the fallback default_llseek() if the readdir operation of the filesystem still uses the big kernel lock. Since llseek() modifies file->f_pos of the directory directly it may need locking to not confuse readdir which usually uses file->f_pos directly as well Since the special characteristics of the BKL (unlocked on schedule) are not necessary in this case, the inode mutex can be used for locking as provided by generic_file_llseek(). This is only possible since all filesystems, except reiserfs, either use a directory as a flat file or with disk address offsets. Reiserfs on the other hand uses a 32bit hash off the filename as the offset so generic_file_llseek() can get used as well since the hash is always smaller than sb->s_maxbytes (= (512 << 32) - blocksize). Signed-off-by:
Jan Blunck <jblunck@suse.de> Acked-by:
Jan Kara <jack@suse.cz> Acked-by:
Anders Larsen <al@alarsen.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jan Blunck authored
st_open() suggests that llseek() doesn't work: "We really want to do nonseekable_open(inode, filp); here, but some versions of tar incorrectly call lseek on tapes and bail out if that fails. So we disallow pread() and pwrite(), but permit lseeks." Instead of using the fallback default_llseek() the driver should use noop_llseek() which leaves the file->f_pos untouched but succeeds. Signed-off-by:
-
Jan Blunck authored
__os_scsi_tape_open() suggests that llseek() doesn't work: "We really want to do nonseekable_open(inode, filp); here, but some versions of tar incorrectly call lseek on tapes and bail out if that fails. So we disallow pread() and pwrite(), but permit lseeks." Instead of using the fallback default_llseek() the driver should use noop_llseek() which leaves the file->f_pos untouched but succeeds. Signed-off-by:
-
jan Blunck authored
This is an implementation of ->llseek useable for the rare special case when userspace expects the seek to succeed but the (device) file is actually not able to perform the seek. In this case you use noop_llseek() instead of falling back to the default implementation of ->llseek. Signed-off-by:
-
Jan Blunck authored
Use nonseekable_open() for this since seeking is not supported anyway. Signed-off-by:
-
Jan Blunck authored
This test is not doing anything since it is always false if the mISDN_read() is called from vfs_read(). Besides that the driver uses nonseekable_open() and is not using off or file->f_pos anywhere. Signed-off-by:
-
Jan Blunck authored
Signed-off-by:
-
Jan Blunck authored
osst_read()/osst_write() modify file->f_pos directly instead of the ppos given to them. The VFS later updates the file->f_pos and overwrites it with the value of ppos. Signed-off-by:
-
FUJITA Tomonori authored
parisc uses iova and iova_length in scatterlist structure instead of dma_address and dma_length. However, the accessor are used so we can convert parisc to use asm-generic/scatterlist.h easily. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Helge Deller <deller@gmx.de> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by:
-
FUJITA Tomonori authored
There are more architectures that don't support ARCH_HAS_SG_CHAIN than those that support it. This removes removes ARCH_HAS_SG_CHAIN in asm-generic/scatterlist.h and lets arhictectures to define it. It's clearer than defining ARCH_HAS_SG_CHAIN asm-generic/scatterlist.h and undefing it in arhictectures that don't support it. Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
Matt Turner <mattst88@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
Andrew Morton authored
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
FUJITA Tomonori authored
There are only two ways to define sg_dma_len(); use sg->dma_length or sg->length. This patch introduces NEED_SG_DMA_LENGTH that enables architectures to choose sg->dma_length or sg->length. Signed-off-by:
-
FUJITA Tomonori authored
This is the first half of the attempt to use asm-generic/scatterlist.h on every architecture. There are only two ways to define scatterlist structure. So it's easy to convert every architecture to use asm-generic/scatterlist.h. This patch: The trick for ISA_DMA_THRESHOLD in asm-generic/scatterlist.h doesn't work for powerpc. This lets architectures defin ISA_DMA_THRESHOLD. Hopefully, we can remove ISA_DMA_THRESHOLD in the future; we can do better to decide if the bouncing is necessary or not. Signed-off-by:
-
Frederic Weisbecker authored
This adds three new types of kernel "crashes" in the lkdtm driver to trigger hardlockups, softlockups and task hung states at will. The first two are useful to test the new generic lockup detector and check its further regressions. The latter one is a bonus to check the hung task detector regressions even though it's not currently in rework. Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Simon Kagstrom <simon.kagstrom@netinsight.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Don Zickus <dzickus@redhat.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by:
-
Albin Tonnerre authored
Add the necessary parts to be enable the use of LZO-compressed initramfs build into the kernel. Signed-off-by:
Albin Tonnerre <albin.tonnerre@free-electrons.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Cesar Eduardo Barros authored
radix_tree_prev_hole() used LONG_MAX to detect underflow; however, ULONG_MAX is clearly what was intended, both here and by its only user (count_history_pages at mm/readahead.c). Reviewed-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by:
-
Jeff Moyer authored
The aio compat code was not converting the struct iovecs from 32bit to 64bit pointers, causing either EINVAL to be returned from io_getevents, or EFAULT as the result of the I/O. This patch passes a compat flag to io_submit to signal that pointer conversion is necessary for a given iocb array. A variant of this was tested by Michael Tokarev. I have also updated the libaio test harness to exercise this code path with good success. Further, I grabbed a copy of ltp and ran the testcases/kernel/syscall/readv and writev tests there (compiled with -m32 on my 64bit system). All seems happy, but extra eyes on this would be welcome. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix CONFIG_COMPAT=n build] Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Reported-by:
Michael Tokarev <mjt@tls.msk.ru> Cc: Zach Brown <zach.brown@oracle.com> Cc: <stable@kernel.org> [2.6.35.1] Signed-off-by:
-
Jeff Moyer authored
It was reported in http://lkml.org/lkml/2010/3/8/309 that 32 bit readv and writev AIO operations were not functioning properly. It turns out that the code to convert the 32bit io vectors to 64 bits was never written. The results of that can be pretty bad, but in my testing, it mostly ended up in generating EFAULT as we walked off the list of I/O vectors provided. This patch set fixes the problem in my environment. are greatly appreciated. This patch: Factor out code that will be used by both compat_do_readv_writev and the compat aio submission code paths. Signed-off-by:
-
Anton Blanchard authored
Most distros turn the console verbosity down and that means a backtrace after a panic never makes it to the console. I assume we haven't seen this because a panic is often preceeded by an oops which will have called console_verbose. There are however a lot of places we call panic directly, and they are broken. Use console_verbose like we do in the oops path to ensure a directly called panic will print a backtrace. Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Julia Lawall authored
Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)). The former makes more clear what is the purpose of the operation, which otherwise looks like a no-op. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T x; identifier f; @@ T f (...) { <+... - ERR_PTR(PTR_ERR(x)) + x ...+> } @@ expression x; @@ - ERR_PTR(PTR_ERR(x)) + ERR_CAST(x) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
FUJITA Tomonori authored
Add ARCH_KMALLOC_MINALIGN description in "Platform Issues" section. Signed-off-by:
-
FUJITA Tomonori authored
Handing DMA mapping errors is essential. Let's put it in the more appropriate place rather than the end of the doc. Signed-off-by:
-
FUJITA Tomonori authored
Now we have <asm-generic/scatterlist.h>. Architectures should use it instead of inventing the own scatterlist struct. Let's update the description. Signed-off-by:
-
FUJITA Tomonori authored
Add the concrete DMA mapping error handling for SCSI drivers on the queuecommand path. Signed-off-by:
-
FUJITA Tomonori authored
Since 2.6.5, it had been commented, 'for backwards compatibility, removed in 2.7.x'. Since 2.6.31, it have been marked as __deprecated. I think that we can remove the API safely now. Signed-off-by:
-
FUJITA Tomonori authored
dma_sync_single() is deprecated and will be removed soon. No functional change since dma_sync_single is the wrapper of dma_sync_single_for_cpu. saa7134-go7007.c is commented out but anyway let's replace it. Signed-off-by:
-
FUJITA Tomonori authored
Adds the concrete DMA mapping error handling for Networking drivers on the transmit path. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
FUJITA Tomonori authored
sync_single_range_for_cpu and sync_single_range_for_device hooks are unnecessary because sync_single_for_cpu and sync_single_for_device can be used instead. Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
