1. 23 Oct, 2018 4 commits
    • Linus Torvalds's avatar
      Merge tag 'regulator-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator · ca9eb48f
      Linus Torvalds authored
      Pull regulator updates from Mark Brown:
       "The biggest chunk of the regulator changes for this release outside of
        the new drivers is the conversion of the fixed regulator to use the
        GPIO descriptor API, there's a small addition to the GPIO API plus a
        bunch of updates to board files to implement it. This is some really
        welcome work from Linus Walleij that's had a bunch of review and has
        been sitting in -next for a while so I'm fairly happy there's no major
        issues.
      
         - Helpers for overlapping linear ranges.
      
         - Display opmode and consumer requested load in the regualtor_summary
           file in debugfs, plus a fix there.
      
         - Support for the fun and entertaining power off mechanism that the
           pfuze100 hardware implements.
      
         - Conversion of the fixed regulator API to use GPIO descriptors,
           including pulling in a bunch of patches to a bunch of board files.
      
         - New drivers for Cirrus Logic Lochnagar, Qualcomm PMS405, Rohm
           BD71847, ST PMIC1, and TI LM363x devices"
      
      * tag 'regulator-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (36 commits)
        regulator: lochnagar: Use a consisent comment style for SPDX header
        regulator: bd718x7: Remove struct bd718xx_pmic
        regulator: Fetch enable gpiods nonexclusive
        regulator/gpio: Allow nonexclusive GPIO access
        regulator: lochnagar: Add support for the Cirrus Logic Lochnagar
        regulator: stpmic1: Return REGULATOR_MODE_INVALID for invalid mode
        regulator: stpmic1: add stpmic1 regulator driver
        dt-bindings: regulator: document stpmic1 pmic regulators
        regulator: axp20x: Mark expected switch fall-throughs
        regulator: bd718xx: fix build warning on x86_64
        regulator: fixed: Default enable high on DT regulators
        regulator: bd718xx: rename bd71837 to 718xx
        regulator: bd718XX use pickable ranges
        regulator/mfd: bd718xx: rename bd71837/bd71847 common instances
        regulator: Support regulators where voltage ranges are selectable
        mfd: dt bindings: add BD71847 device-tree binding documentation
        regulator: dt bindings: add BD71847 device-tree binding documentation
        regulator/mfd: Support ROHM BD71847 power management IC
        regulator: da905{2,5}: Remove unnecessary array check
        regulator: qcom: Add PMS405 regulators
        ...
      ca9eb48f
    • Linus Torvalds's avatar
      Merge tag 'spi-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi · b537149a
      Linus Torvalds authored
      Pull spi updates from Mark Brown:
       "One new core feature here, a small collection of new drivers and a
        bunch of small improvements in existing drivers:
      
         - A new CS_WORD flag for transfers where the chip select is toggled
           at every word, with both a generic implementation and the ability
           for controllers to do this automatically (including a DaVinci one).
      
         - New drivers for Mediatek MT2712, Qualcomm GENI and QSPI, Spreadtrum
           SPI and ST STM32 QSPI plus new IDs for several existing ones"
      
      * tag 'spi-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (86 commits)
        spi: lpspi: add imx8qxp compatible string
        spi: Allow building SPI_BCM63XX_HSSPI on ARM-based SoCs
        spi: omap2-mcspi: Add slave mode support
        spi: omap2-mcspi: Set FIFO DMA trigger level to word length
        spi: omap2-mcspi: Switch to readl_poll_timeout()
        spi: spi-mem: add stm32 qspi controller
        dt-bindings: spi: add stm32 qspi controller
        spi: sh-msiof: document R8A779{7|8}0 bindings
        spi: pic32-sqi: don't pass GFP_DMA32 to dma_alloc_coherent
        MAINTAINERS: Add entry for Broadcom SPI controller
        spi: sh-msiof: fix deferred probing
        spi: imx: use PIO mode if size is small
        spi: imx: correct wml as the last sg length
        spi: imx: move wml setting to later than setup_transfer
        PCI: Provide pci_match_id() with CONFIG_PCI=n
        spi: Make GPIO CSs honour the SPI_NO_CS flag
        spi/spi-pxa2xx: add PXA2xx SSP SPI Controller
        spi: pxa2xx: Add devicetree support
        spi: pxa2xx: Use an enum for type
        spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
        ...
      b537149a
    • Linus Torvalds's avatar
      Merge tag 'regmap-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap · 6214a9fe
      Linus Torvalds authored
      Pull regmap updates from Mark Brown:
       "A small update with a couple of new APIs that are useful for some
        small sets of devices:
      
         - Split up the single_rw flagging to map read and write separately as
           some devices support bulk operations for only read or only write.
      
         - Add a write version of the noinc API.
      
         - Clean up the code for LOG_DEVICE a bit"
      
      * tag 'regmap-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
        regmap: use less #ifdef for LOG_DEVICE
        regmap: Add regmap_noinc_write API
        regmap: split up regmap_config.use_single_rw
        regmap: fix comment for regmap.use_single_write
      6214a9fe
    • Linus Torvalds's avatar
      Merge tag 'mtd/for-4.20' of git://git.infradead.org/linux-mtd · a36cf686
      Linus Torvalds authored
      Pull mtd updates from Boris Brezillon:
       "SPI NOR core changes:
         - Support non-uniform erase size
         - Support controllers with limited TX fifo size
      
       Driver changes:
         - m25p80: Re-issue a WREN command after each write access
         - cadence: Pass a proper dir value to dma_[un]map_single()
         - fsl-qspi: Check fsl_qspi_get_seqid() return val make sure 4B
           addressing opcodes are properly handled
         - intel-spi: Add a new PCI entry for Ice Lake
      
       Raw NAND core changes:
         - Two batchs of cleanups of the NAND API, including:
            * Deprecating a lot of interfaces (now replaced by ->exec_op()).
            * Moving code in separate drivers (JEDEC, ONFI), in private files
              (internals), in platform drivers, etc.
            * Functions/structures reordering.
            * Exclusive use of the nand_chip structure instead of the MTD one
              all across the subsystem.
         - Addition of the nand_wait_readrdy/rdy_op() helpers.
      
       Raw NAND controllers drivers changes:
         - Various coccinelle patches.
         - Marvell:
            * Use regmap_update_bits() for syscon access.
            * More documentation.
            * BCH failure path rework.
            * More layouts to be supported.
            * IRQ handler complete() condition fixed.
         - Fsl_ifc:
            * SRAM initialization fixed for newer controller versions.
         - Denali:
            * Fix licenses mismatch and use a SPDX tag.
            * Set SPARE_AREA_SKIP_BYTES register to 8 if unset.
         - Qualcomm:
            * Do not include dma-direct.h.
         - Docg4:
            * Removed.
         - Ams-delta:
            * Use of a GPIO lookup table
            * Internal machinery changes.
      
       Raw NAND chip drivers changes:
         - Toshiba:
            * Add support for Toshiba memory BENAND
            * Pass a single nand_chip object to the status helper.
         - ESMT:
            * New driver to retrieve the ECC requirements from the 5th ID
              byte.
      
        MTD changes:
         - physmap cleanups/fixe
         - gpio-addr-flash cleanups/fixes"
      
      * tag 'mtd/for-4.20' of git://git.infradead.org/linux-mtd: (93 commits)
        jffs2: free jffs2_sb_info through jffs2_kill_sb()
        mtd: spi-nor: fsl-quadspi: fix read error for flash size larger than 16MB
        mtd: spi-nor: intel-spi: Add support for Intel Ice Lake SPI serial flash
        mtd: maps: gpio-addr-flash: Convert to gpiod
        mtd: maps: gpio-addr-flash: Replace array with an integer
        mtd: maps: gpio-addr-flash: Use order instead of size
        mtd: spi-nor: fsl-quadspi: Don't let -EINVAL on the bus
        mtd: devices: m25p80: Make sure WRITE_EN is issued before each write
        mtd: spi-nor: Support controllers with limited TX FIFO size
        mtd: spi-nor: cadence-quadspi: Use proper enum for dma_[un]map_single
        mtd: spi-nor: parse SFDP Sector Map Parameter Table
        mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
        mtd: rawnand: marvell: fix the IRQ handler complete() condition
        mtd: rawnand: denali: set SPARE_AREA_SKIP_BYTES register to 8 if unset
        mtd: rawnand: r852: fix spelling mistake "card_registred" -> "card_registered"
        mtd: rawnand: toshiba: Pass a single nand_chip object to the status helper
        mtd: maps: gpio-addr-flash: Use devm_* functions
        mtd: maps: gpio-addr-flash: Fix ioremapped size
        mtd: maps: gpio-addr-flash: Replace custom printk
        mtd: physmap_of: Release resources on error
        ...
      a36cf686
  2. 22 Oct, 2018 13 commits
  3. 21 Oct, 2018 13 commits
  4. 20 Oct, 2018 10 commits