- 16 Jun, 2009 40 commits
-
-
Randy Dunlap authored
Mark internal struct members as /* private: */ so that kernel-doc won't produce warnings about missing descriptions for them. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Paul Mundt authored
CC drivers/usb/host/hwa-hc.o drivers/usb/host/hwa-hc.c:601: warning: initialization from incompatible pointer type drivers/usb/host/hwa-hc.c:602: warning: initialization from incompatible pointer type The prototype for these changed, so the message itself was dropped. As the only thing these hooks were doing was printing out the message for debugging, there is not much point in keeping them around. So, just kill them off. Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Acked-by:
David Vrabel <david.vrabel@csr.com> Signed-off-by:
-
Hermann Kneissel authored
The following patch removes the call to usb_reset_device which may occur when closing the driver by implementing a new session initialization code based on the method used by gpsbabel. The patch is against linux-2.6.30-rc3-git1. Signed-off-by: Hermann Kneissel herkne@users.sourceforge.net Signed-off-by: -
Richard Laager authored
Identify the Novatel MC760/U760/USB760 in the option USB serial driver. Signed-off-by:
Richard Laager <rlaager@wiktel.com> Signed-off-by:
-
Alan Stern authored
This patch (as1237) changes the way the PCI host controller drivers avoid retaining bogus hardware states during resume-from-hibernation. Previously we had reset the hardware as part of preparing to reinstate the memory image. But we can do better now with the new PM framework, since we know exactly which resume operations are from hibernation. The pci_resume method is changed to accept a flag indicating whether the system is resuming from hibernation. When this flag is set, the drivers will reset the hardware to get rid of any existing state. Similarly, the pci_suspend method is changed to remove the pm_message_t argument. It's no longer needed, since no special action has to be taken when preparing to reinstate the memory image. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Acked-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
Alan Stern authored
This patch (as1236) converts the USB PCI power management routines over to the new PM framework. Signed-off-by:
-
Alan Stern authored
This patch (as1235) adds an array of PCI power-state names, together with a simple inline accessor routine. Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Alan Stern authored
This patch (as1233) makes g_file_storage use the "unaligned" accessors. This is based on work originally done by Harvey Harrison. Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Acked-by:
-
Elina Pasheva authored
- Version number set to 1.3.5 - Added "\n" at the end of each string in dev_dbg() code to improve the debug information visibility. Without this change the debug logs are very difficult to read. Signed-off-by:
Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by:
-
Elina Pasheva authored
- Version number set to 1.3.4 - Increased the number of input/output URBs for improved performance (numbers based on an measurement study triggered by a user request). We performed the testing using a network simulator that provided full speeds in the uplink and downlink directions and this combination of URBs provided the best throughput. Signed-off-by:
-
Greg Kroah-Hartman authored
The usb_host class isn't used for anything anymore (it was used for debug files, but they have moved to debugfs a few kernel releases ago), so let's delete it before someone accidentally puts a file in it. Signed-off-by: -
Greg Kroah-Hartman authored
The controller device is where we want this sysfs file, especially as the dev pointer is about to go away... Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: -
Greg Kroah-Hartman authored
Right now we jump through some hoops to get to the struct ohci_hcd struct in the ohci debugfs files. Remove all of the fun casting around and just use the pointer directly. This is needed as the dev pointer in the hcd structure is going away, and it makes the code simpler and smaller Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: -
Alan Stern authored
This patch (as1239) updates the kernel's treatment of Unicode. The character-set conversion routines are well behind the current state of the Unicode specification: They don't recognize the existence of code points beyond plane 0 or of surrogate pairs in the UTF-16 encoding. The old wchar_t 16-bit type is retained because it's still used in lots of places. This shouldn't cause any new problems; if a conversion now results in an invalid 16-bit code then before it must have yielded an undefined code. Difficult-to-read names like "utf_mbstowcs" are replaced with more transparent names like "utf8s_to_utf16s" and the ordering of the parameters is rationalized (buffer lengths come immediate after the pointers they refer to, and the inputs precede the outputs). Fortunately the low-level conversion routines are used in only a few places; the interfaces to the higher-level uni2char and char2uni methods have been left unchanged. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Clemens Ladisch authored
Change the encoding of strings returned by usb_string() from ISO 8859-1 to UTF-8. Signed-off-by:
-
Clemens Ladisch authored
utf8_wcstombs forgot to include one-byte UTF-8 characters when calculating the output buffer size, i.e., theoretically, it was possible to overflow the output buffer with an input string that contains enough ASCII characters. In practice, this was no problem because the only user so far (VFAT) always uses a big enough output buffer. Signed-off-by:
-
Clemens Ladisch authored
When utf8_wcstombs encounters a character that cannot be encoded, we must not decrease the remaining output buffer size because nothing has been written to the output buffer. Signed-off-by:
-
Greg Kroah-Hartman authored
People are very used to the devices file in usbfs. Now that we have moved usbfs to be an "embedded" option only, the developers miss the file, they had grown quite attached to it over all of these years. This patch brings it back and puts it in the usb debugfs directory, so that the developers don't feel sad anymore. Signed-off-by: -
Greg Kroah-Hartman authored
All usb debugfs files should be behind the usb directory, not at the root of debugfs. Signed-off-by: -
Greg Kroah-Hartman authored
All usb debugfs files should be behind the usb directory, not at the root of debugfs. Signed-off-by: -
Greg Kroah-Hartman authored
All usb debugfs files should be behind the usb directory, not at the root of debugfs. Signed-off-by: -
Greg Kroah-Hartman authored
All usb debugfs files should be behind the usb directory, not at the root of debugfs. Signed-off-by: -
Greg Kroah-Hartman authored
All usb debugfs files should be behind the usb directory, not at the root of debugfs. Signed-off-by: -
Greg Kroah-Hartman authored
Add a common usb directory in debugfs that the usb subsystem can use. Signed-off-by: -
Tony Cook authored
This patch removes all the unnecessary "\n"s that the debug print statements have, which result in everything appearing double spaced and unreadable in the logs. Signed-off-by:
Tony Cook <tony-cook@bigpond.com> Signed-off-by:
-
H Hartley Sweeten authored
Fix sparse warning in drivers/usb/core/hub.c. The following sparse warning is seen when building on ARM due do the macro raw_local_irq_save(): warning: symbol 'temp' shadows an earlier one Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
-
H Hartley Sweeten authored
Fix sparse warnings in drivers/usb/host/ohci-hcd.c. Four of the following sparse warning are seen when building on ARM due do the macro raw_local_irq_save(): warning: symbol 'temp' shadows an earlier one Signed-off-by:
-
Robert Jarzmik authored
Since the PXA 27x UDC automatically ACK's some control packets such as SET_INTERFACE, the gadgets may not get a chance to process the request before another control packet is received. The Linux gadgets do not expect to receive setup callbacks out of order. The file storage gadget only saves the "highest" priority request. The PXA27x UDC driver must make sure it only sends one up at a time, allowing the gadget to make changes before continuing. In theory, the host would be NACK'd while the gadget processes the change but the UDC has already ACK'd the request. If another request is sent by the host that is not automatically ACK'd by the UDC, then the throttling happens properly to regain sync. The observed case was the file_storage gadget timing out on a BulkReset request because the SET_INTERFACE was being processed by the gadget. Since SET_INTERFACE is higher priority than BulkReset, the BulkReset was dropped. This was exacerbated by turning on the debug which delayed the fsg signal processing thread. This also fixes the "should never get in WAIT_ACK_SET_CONF_INTERF state here!!!" warning. Reported-by:
Vernon Sauder <vernoninhand@gmail.com> Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Acked-by:
-
Robert Jarzmik authored
Got pxa27x_udc working on the pxa320 Nomad platform. The problem was that the pxa3xx UDC is not quite compatible with the pxa27x UDC in how it handles back-to-back control packets. The pxa27x probably drops them by default, but the pxa320 does not, and you have to detect it and set the OPC bit to clear the zero-length packet. Signed-off-by:
Aric Blumer <aric@sdgsystems.com> Signed-off-by:
-
David Brownell authored
Follow pxa27x change in OTGPH handling, and use the newly defined pxa27x_clear_otgph(). Signed-off-by:
Eric Miao <eric.miao@marvell.com> Acked-by:
-
Matthias Kaehlcke authored
use usb_endpoint_type() instead of fiddling manually with bmAttributes Signed-off-by:
Matthias Kaehlcke <matthias@kaehlcke.net> Acked-by:
-
Matthias Kaehlcke authored
Use helper functions to determine the type and direction of an endpoint instead of fiddling with bEndpointAddress and bmAttributes Signed-off-by:
-
Matthias Kaehlcke authored
Use helper functions to determine the type and direction of an endpoint instead of fiddling with bEndpointAddress and bmAttributes Signed-off-by:
-
Matthias Kaehlcke authored
Use helper functions to determine the type and direction of an endpoint instead of fiddling with bEndpointAddress and bmAttributes Signed-off-by:
-
Matthias Kaehlcke authored
Use helper functions to determine the type and direction of an endpoint instead of fiddling with bEndpointAddress and bmAttributes Signed-off-by:
Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by:
-
Matthias Kaehlcke authored
Use helper functions to determine the type and direction of an endpoint instead of fiddling with bEndpointAddress and bmAttributes Signed-off-by:
-
H Hartley Sweeten authored
Fix 3 sparse warning in drivers/usb/core/sysfs.c. warning: symbol '__mptr' shadows an earlier one Signed-off-by:
-
Pascal Terjan authored
D-Link DWN-652 in Modem mode exposes 3 interfaces - First one is the USB storage one - Second one is for both control and connection - Third one is unknown This patch avoids usb-storage trying to switch again when already in modem mode, and exposes only 2 ttyUSB instead of 3 by not attaching to the storage interface Signed-off-by:
Pascal Terjan <pterjan@mandriva.com> Signed-off-by:
-
Scott James Remnant authored
Modern systems do not use usbfs; the entries within it are files, not device nodes, and do not support ACLs which are the default way to provide access to USB devices to untrusted users. It is replaced by device-nodes maintained by udev in /dev/bus/usb, libusb uses this device nodes. Mark the option as deprecated, and hide entirely for non-embedded builds (which may not be using udev but require raw USB device access). Signed-off-by:
Scott James Remnant <scott@canonical.com> Acked-by:
Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
-
Alan Stern authored
This patch (as1230) consolidates code in usb_unbind_interface() and usb_driver_release_interface(). In fact, it makes release_interface call unbind_interface, thereby removing the need for duplicated code. It works like this: If the interface has already been registered with the driver core when a driver releases it, then the usual driver-core mechanism will call unbind_interface. If it hasn't been unregistered then we will make the call ourselves. As a nice bonus, drivers now don't have to worry about whether their disconnect method will get called when they release an interface -- it always will. Previously it would be called only if the interface was registered. Signed-off-by:
-
