- 27 Feb, 2009 40 commits
-
-
Dan Williams authored
Scanned BSS entries are timestamped with jiffies, which doesn't increment across suspend and hibernate. On resume, every BSS in the scan list looks like it was scanned within the last 10 seconds, irregardless of how long the machine was actually asleep. Age scan results on resume with the time spent during sleep so userspace has a clue how old they really are. Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Ivo van Doorn authored
The word_base is in bytes instead of word index number, this means that when using it, it should be transformed into a word index first. Otherwise RF register reading will fail through debugfs since we would start reading 4 words starting with word 4 (which is the last valid word for RF). Signed-off-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Jouni Malinen authored
The TX/RX packet counters are needed to fill in RADIUS Accounting attributes Acct-Output-Packets and Acct-Input-Packets. We already collect the needed information, but only the TX/RX bytes were previously exposed through nl80211. Allow applications to fetch the packet counters, too, to provide more complete support for accounting. Signed-off-by:
Jouni Malinen <jouni.malinen@atheros.com> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Sujith authored
Setting up the CAB queue requires only the beacon interval, remove the function ath_get_beaconconfig() which is redundant. Signed-off-by:
Sujith <Sujith.Manoharan@atheros.com> Signed-off-by:
-
Sujith authored
Signed-off-by:
-
Sujith authored
Signed-off-by:
-
Sujith authored
Set channel change time to 5ms, this will improve scan results. Signed-off-by:
-
Jouni Malinen authored
This extends the NL80211_CMD_TRIGGER_SCAN command to allow applications to specify a set of information element(s) to be added into Probe Request frames with NL80211_ATTR_IE. This provides support for the MLME-SCAN.request primitive parameter VendorSpecificInfo and can be used, e.g., to implement WPS scanning. Signed-off-by:
-
Sujith authored
Signed-off-by:
-
Sujith authored
RX and calibration have different timeout requirements. This patch fixes it by changing the HW wait routine to accept a timeout value. Signed-off-by:
-
Sujith authored
This patch programs the RTC registers of AR9100 chipsets correctly during chip reset. Signed-off-by:
-
Bob Copeland authored
RTS and CTS-to-self duration needs to go after ICV len is considered. Changes-licensed-under: 3-Clause-BSD Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Bob Copeland authored
We currently send beacons directly from the interrupt routine. This can hold up interrupt processing in beaconing modes and makes the ISR somewhat more complex. Move it to a tasklet like rx and tx. Changes-licensed-under: 3-Clause-BSD Signed-off-by:
-
Bob Copeland authored
ath5k_reset can be called from process context, which in turn can call ath5k_beacon_config which takes the sc->block spinlock. Since it can also be taken in hard irq context, use spin_lock_irqsave everywhere. This fixes a potential deadlock in adhoc mode. Changes-licensed-under: 3-Clause-BSD Cc: stable@kernel.org Signed-off-by:
-
Bob Copeland authored
Since interrupts are already masked by the hardware, there's no need to discard interrupt bits in the ISR itself. Also, in ath5k_beacon_config we mask off a couple of bits without locking, so doing this mask in software can lead to unhandled beacon timer and beacon miss interrupts. Changes-licensed-under: 3-Clause-BSD Signed-off-by:
-
Ivo van Doorn authored
Signed-off-by:
-
Ivo van Doorn authored
The only way rf_write() can be called with word 0 is when the user sends the wrong word index through debugfs. However the values which are send through debugfs are validated using the RF_BASE and RF_SIZE macro values, the most logical solution is to increase RF_BASE with 4 and decrease RF_SIZE with 4 (RF_SIZE has always been 1 word too big) Signed-off-by:
-
Ivo van Doorn authored
The atomic requirement for get_tsf() has been removed by mac80211. This means the USB drivers can add support for the callback function again. Signed-off-by:
-
Randy Dunlap authored
Add empty function for case of CONFIG_NL80211=n: net/wireless/scan.c:35: error: implicit declaration of function 'nl80211_send_scan_aborted' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
-
Reinette Chatre authored
Fixes: - iwlwifi is an optional driver and should thus not default to 'y'. - 3945 now depends on IWLCORE. Rework: - There is not a case when IWLCORE should not be selected. At the same time the driver does not use IWLWIFI or IWLCORE. We can just merge the usage of these two. With IWLWIFI being the driver name we proceed to use just it and replace instances of IWLCORE with it. The module name does not change and is still iwlcore. - Both IWLAGN and IWL3945 are selecting FW_LOADER, we can thus just move this up to one select when IWLWIFI is selected. - IWL5000 now supports Intel Wireless Wifi 100, 6000, and 6050 series. - Now that 3945 depends on IWLWIFI we can also indicate its dependency on MAC80211_LEDS and LEDS_CLASS at this level. - IWLAGN_LEDS is not used by driver - remove it. - IWLAGN_SPECTRUM_MEASUREMENT actually depends on IWLWIFI as it forms part of iwlcore module. Move this config up in Kconfig to reflect that and also change name to IWLWIFI_SPECTRUM_MEASUREMENT. - CONFIG_IWLWIFI_RFKILL is used by iwlagn as well as iwl3945, add text to description that indicates this. - CONFIG_IWL3945_RFKILL does not exist - remove usage from driver. - Add "iwlagn" to end of description of IWLAGN to help people understand what iwlagn means in rest of Kconfig text. - Add "iwl3945" to end of description of IWL3945 to help people understand what iwlagn means in rest of Kconfig text. - Change IWLWIFI_DEBUGFS description to indicate that only iwlagn supports it (for now). Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Reported-by:
-
Reinette Chatre authored
Use one workqueue instead of one per CPU. Signed-off-by:
-
Wu, Fengguang authored
Signed-off-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Jiri Slaby authored
- some of them are defined as follows: #define ipw_write32 expr1; expr2 and are called from loops or ifs without a compound statement, so they are broken. Fix it by putting them into do {} while (0) for writes and ({ }) for reads. - also unify and cleanup them while at it -- convert them from macros to inline functions, so that we get some basic typechecking Signed-off-by:Jiri Slaby <jirislaby@gmail.com> Acked-by:
Zhu Yi <yi.zhu@intel.com> Cc: James Ketrenos <jketreno@linux.intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Bob Copeland authored
Both branches of the regulatory check in ath_attach() set up a custom regulatory domain and apply radar and world flags, so extract those into a single path. While at it, fix a couple of spelling errors and an unnecessary extra pointer traversal. Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
-
Bob Copeland authored
ath9k_regd_get_current_country() doesn't exist. Signed-off-by:
-
Bob Copeland authored
The function ath9k_regd_get_rd() is unused. Signed-off-by:
-
Bob Copeland authored
Write isWwrSKU as an inline function and nix the camel-case to make the routine slightly clearer. Change its argument to take the regd value directly so it can eventually be used by ath5k as well. Signed-off-by:
-
Bob Copeland authored
Since we already have a stack variable to track the eeprom regd, we can grab it up front it and save three calls to fetch it again. Signed-off-by:
-
Bob Copeland authored
The current_rd_inuse regulatory value is assigned but not used anywhere. Signed-off-by:
-
Helmut Schaa authored
This avoids triggering a BUG_ON in pci_disable_msi in the error path. Furthermore remove the first call to pci_disable_device as it is already called at out_pci_disable_device. Both issues were introduced in the patch "iwlagn: fix hw-rfkill while the interface is down". Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Acked-by:
-
Senthil Balasubramanian authored
This patch adds Open Loop Control support for Atheros chipsets that supports open loop power control. Signed-off-by:
Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by:
-
Sujith authored
The AP can switch dynamically between 20/40 Mhz channel width, in which case we switch the local operating channel, but the rate control algorithm is not notified. This patch adds a new callback to indicate such changes to the RC algorithm. Currently, HT channel width change is notified, but this callback can be used to indicate any new requirements that might come up later on. Signed-off-by:
-
Sujith authored
The existing value was too conservative, causing the history buffer not to be updated. Signed-off-by:
-
Sujith authored
Signed-off-by:
-
Sujith authored
This patch fixes a bug in ANI, where the MIB counters were being cleared before the stats were updated. Signed-off-by:
-
Sujith authored
Signed-off-by:
-
Sujith authored
This patch lays the groundwork for handling TSF Out of Range interrupt, which will be used for power save later on. Signed-off-by:
-
Sujith authored
This patch enables Fractional N mode for all channel if the EEPROM says so, and also fixes the INI only when the device is not a 2 GHz only capable device. Signed-off-by:
-
Sujith authored
AR9285 chipsets have a different EEPROM layout, handle this appropriately when populating the rd_ext capability. Signed-off-by:
-
Sujith authored
This patch fixes a bug where the max power level was being calculated incorrectly. Signed-off-by:
-
