PCI busses can be registered multiple times, so we need to detect if we
have registered our bus structure in sysfs already.  If so, don't do it
again.

Thanks to Guennadi Liakhovetski <g.liakhovetski@gmx.de> for reporting
the problem, and to Linus for poking me to get me to believe that it was
a real problem.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* master.kernel.org:/home/rmk/linux-2.6-arm: (26 commits)
  [ARM] 4856/1: Orion: initialise the sixth PCIe MBUS mapping window as well
  [ARM] 4855/1: Orion: use correct ethernet unit address range
  [ARM] 4853/1: include uImage target in make help
  [ARM] 4851/1: ns9xxx: fix size of gpiores
  [ARM] AT91: correct at91sam9263ek LCD power gpio pin
  [ARM] replace remaining __FUNCTION__ occurrences
  [ARM] 4850/1: include generic pgtable.h for !CONFIG_MMU case
  [ARM] 4849/1: move ATAGS asm definitions
  [ARM] 4848/1: at91: remove false lockdep warnings
  [ARM] 4847/1: kprobes: fix compilation with CONFIG_DEBUG_FS=y
  [ARM] include/asm-arm - use angle brackets for includes
  [ARM] 4845/1: Orion: Ignore memory tags with invalid data
  ARM: OMAP2: Register the L4 io bus to boot OMAP2
  ARM: OMAP1: Compile in other 16xx boards to OSK defconfig
  ARM: OMAP1: Refresh H2 defconfig
  ARM: OMAP1: Refresh OSK defconfig
  ARM: OMAP: gpio lockdep updates
  ARM: OMAP1: omap1/pm.c build fix
  ARM: OMAP1: omap h2 regression fix
  ARM: OMAP1: Fix compile for boards depending on old gpio expander
  ...

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (22 commits)
  [POWERPC] Fix large hash table allocation on Cell blades
  [POWERPC] Export empty_zero_page
  [POWERPC] Fix viodasd driver with scatterlist debug
  [POWERPC] Fix arch/powerpc/platforms/powermac/pic.c when !CONFIG_ADB_PMU
  [POWERPC] Fix drivers/macintosh/mediabay.c when !CONFIG_ADB_PMU
  [POWERPC] Fix undefined pmu_sys_suspended compilation error
  [POWERPC] Fix build of modular drivers/macintosh/apm_emu.c
  [POWERPC] Fix sleep on some powerbooks
  [POWERPC] Fix bogus test for unassigned PCI resources
  [POWERPC] Fix zImage-dtb.initrd build error
  [POWERPC] Add __ucmpdi2 for 64-bit comparisons in 32-bit kernels
  [POWERPC] spufs: fix rescheduling of non-runnable contexts
  [POWERPC] spufs: don't (ab)use SCHED_IDLE
  [POWERPC] QE: Make qe_get_firmware_info reentrant
  [POWERPC] 83xx: Make 83xx perfmon support selectable
  [PPC] 8xx: swap bug-fix
  [POWERPC] 85xx: sbc8548 - Fix incorrect PCI-X and PCI interrupt map
  [POWERPC] QE: Fix QE firmware uploading limit
  [POWERPC] 8xx: Fix wrapper platform for adder875, and combine defconfigs.
  [POWERPC] 8xx: fix swap
  ...

My recent hack to allocate the hash table under 1GB on cell was poorly
tested, *cough*. It turns out on blades with large amounts of memory we
fail to allocate the hash table at all. This is because RTAS has been
instantiated just below 768MB, and 0-x MB are used by the kernel,
leaving no areas that are both large enough and also naturally-aligned.

For the cell IOMMU hack the page tables must be under 2GB, so use that
as the limit instead. This has been tested on real hardware and boots
happily.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Once again, this time with feeling....

						- Ted

>From c91cfaabc17f8a53807a2f31f067a732e34a1550 Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Wed, 12 Mar 2008 11:50:39 -0400
Subject: Export empty_zero_page

The empty_zero_page symbol is exported by most other architectures
(s390, ia64, x86, um), and an upcoming ext4 patch needs it because
ZERO_PAGE() references empty_zero_page, and we need it to zero out an
unitialized extents in ext4 files.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The iSeries viodasd drivers does some very strange things with
scatterlists, one of these causing a BUG_ON to trigger when
scatterlist debugging is enabled due to initializing the
scatterlist with memset instead of sg_init_table().

This fixes it by using sg_init_table().  The rest of the stuff
it does to that poor list is still pretty awful but it will work.

I may look into fixing things in a nicer way some other time.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

When building arch/powerpc/platforms/powermac/pic.c when !CONFIG_ADB_PMU
we get the following warnings:

arch/powerpc/platforms/powermac/pic.c: In function 'pmacpic_find_viaint':
arch/powerpc/platforms/powermac/pic.c:623: warning: label 'not_found' defined but not used

This fixes it.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

When building drivers/macintosh/mediabay.c if CONFIG_ADB_PMU isn't
defined we get:

drivers/built-in.o: In function `media_bay_step':
mediabay.c:(.text+0x92b84): undefined reference to `pmu_suspend'
mediabay.c:(.text+0x92c08): undefined reference to `pmu_resume'

Create empty place holders in that scenario.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

pmu_sys_suspended is declared extern when:
	defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
but only defined when:
	defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
which is wrong.  Let's fix that.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Currently, if drivers/macintosh/apm_emu is a module and the config
doesn't have CONFIG_SUSPEND we get:

ERROR: "pmu_batteries" [drivers/macintosh/apm_emu.ko] undefined!
ERROR: "pmu_battery_count" [drivers/macintosh/apm_emu.ko] undefined!
ERROR: "pmu_power_flags" [drivers/macintosh/apm_emu.ko] undefined!

on PPC32.  The variables aren't wrapped in '#if defined(CONFIG_SUSPEND)'
so we probably shouldn't wrap the exports either.  This removes the
CONFIG_SUSPEND part of the export, which fixes compilation on ppc32.
Signed-off-by: Guido Guenther <agx@sigxcpu.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The PMU backlight code would kick in during sleep/resume even on
machines that use a different backlight method.  This breaks
sleep on some PowerBooks.

This fixes it by adding a flag to indicate whether the backlight
is controlled by the PMU, and testing that before trying to use
the PMU to turn off the backlight during sleep.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

A bogus test for unassigned resources that came from our 32-bit
PCI code ended up being "merged" by my previous patch series,
breaking some 64-bit setups where devices have legal resources
ending at 0xffffffff.

This fixes it by completely changing the test.  We now test for
res->start == 0, as the generic code expects, and we also only
do so on platforms that don't have the PPC_PCI_PROBE_ONLY flag
set, as there are cases of pSeries and iSeries where it could
be a valid value and those can't reassign devices.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The pattern substitution rules were failing when used with zImage-dtb
targets.  If zImage-dtb.initrd was selected, the pattern substitution
would generate "zImage.initrd-dtb" instead of "zImage-dtb.initrd" which
caused the build to fail.

This renames zImage-dtb to dtbImage to avoid the problem entirely.
By not using the zImage prefix then is no potential for namespace
collisions.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Some drivers (such as V4L2) have code that causes gcc to generate
calls to __ucmpdi2 when compiling for 32-bit powerpc, which results
in either a link-time error or a module that can't be loaded, as
we don't currently have a __ucmpdi2.  This adds one so these drivers
can be used.
Signed-off-by: Paul Mackerras <paulus@samba.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits)
  [SCTP]: Fix local_addr deletions during list traversals.
  net: fix build with CONFIG_NET=n
  [TCP]: Prevent sending past receiver window with TSO (at last skb)
  rt2x00: Add new D-Link USB ID
  rt2x00: never disable multicast because it disables broadcast too
  libertas: fix the 'compare command with itself' properly
  drivers/net/Kconfig: fix whitespace for GELIC_WIRELESS entry
  [NETFILTER]: nf_queue: don't return error when unregistering a non-existant handler
  [NETFILTER]: nfnetlink_queue: fix EPERM when binding/unbinding and instance 0 exists
  [NETFILTER]: nfnetlink_log: fix EPERM when binding/unbinding and instance 0 exists
  [NETFILTER]: nf_conntrack: replace horrible hack with ksize()
  [NETFILTER]: nf_conntrack: add \n to "expectation table full" message
  [NETFILTER]: xt_time: fix failure to match on Sundays
  [NETFILTER]: nfnetlink_log: fix computation of netlink skb size
  [NETFILTER]: nfnetlink_queue: fix computation of allocated size for netlink skb.
  [NETFILTER]: nfnetlink: fix ifdef in nfnetlink_compat.h
  [NET]: include <linux/types.h> into linux/ethtool.h for __u* typedef
  [NET]: Make /proc/net a symlink on /proc/self/net (v3)
  RxRPC: fix rxrpc_recvmsg()'s returning of msg_name
  net/enc28j60: oops fix
  ...

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c: chips subdirectory is deprecated
  i2c: Keep client->driver and client->dev.driver in sync
  i2c-amd756: Fix off-by-one

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Clocksource: Only install r4k counter as clocksource if present.
  [MIPS] Lasat: fix LASAT_CASCADE_IRQ
  [MIPS] Delete leftovers of old pcspeaker support.
  [MIPS] BCM1480: Init pci controller io_map_base
  [MIPS] Yosemite: Fix a few more section reference bugs.
  [MIPS] Fix yosemite build error
  [MIPS] Fix loads of section missmatches
  [MIPS] IP27: Tighten up CPU description to fix warnings.
  [MIPS] Fix plat_ioremap for JMR3927
  [MIPS] Export __ucmpdi2 to modules.
  [MIPS] Fix typo in comment
  [MIPS] Use KBUILD_DEFCONFIG
  [MIPS] Allow 48Hz to be selected if CONFIG_SYS_SUPPORTS_ARBIT_HZ is set.
  [MIPS] Added missing cases for rdhwr emulation
  [MIPS] Alchemy: Fix ids in Alchemy db dma device table

Some BIOSes have PNP motherboard devices with resources that
partially overlap PCI BARs.  The PNP system driver claims these
motherboard resources, which prevents the normal PCI driver from
requesting them later.

This patch disables the PNP resources that conflict with PCI BARs
so they won't be claimed by the PNP system driver.

Of course, this only works if PCI devices have already been enumerated.
Currently this is the case because PCI devices are discovered before
any PNP init via this path:

    acpi_pci_root_init() -> acpi_pci_root_add() -> pci_acpi_scan_root() ->
	pci_scan_bus_parented() -> pci_scan_child_bus() -> ...

Avuton Olrich tested this and confirmed that it fixes his ALSA sound
card (see http://lkml.org/lkml/2008/1/27/168).

References:
    https://bugzilla.redhat.com/show_bug.cgi?id=280641
    https://bugzilla.redhat.com/show_bug.cgi?id=313491
    http://lkml.org/lkml/2008/1/9/449
    http://thread.gmane.org/gmane.linux.acpi.devel/27312
    http://lkml.org/lkml/2008/1/27/168Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are other systems with similar problems
(http://lkml.org/lkml/2008/1/27/168), so we need a more
generic quirk.  Remove the Supermicro-specific one first.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The assertion that checks for sge context overflow is
incorrectly hard-coded to 32. This causes a kernel bug
check when using big-data mounts. Changed the BUG_ON to
use the computed value RPCSVC_MAXPAGES.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

RDMA connection shutdown on an SMP machine can cause a kernel crash due
to the transport close path racing with the I/O tasklet.

Additional transport references were added as follows:
- A reference when on the DTO Q to avoid having the transport
  deleted while queued for I/O.
- A reference while there is a QP able to generate events.
- A reference until the DISCONNECTED event is received on the CM ID
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixes:

	block/genhd.c:361: warning: ignoring return value of ‘class_register’, declared with attribute warn_unused_result
Signed-off-by: Roland McGrath <roland@redhat.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It was all wrapped in '#ifdef CONFIG_BLOCK' anyway, so userspace was
getting nothing useful out of it. And the special #ifndef __KERNEL__
version of 'struct partition' makes me inclined to promote an attitude
of violence...

Stick some comments on some of the #endifs too, while we're at it.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Introduced in commit-id 9e2779fa and
ifdef'ed out for nommu in 8ca3ed87, both
approaches end up breaking the nommu build in different ways. An
impressive feat for a 2-liner.

Current is_vmalloc_addr() users fall in to two camps:

	- Determining whether to use vfree()/kfree()
	- Whether to do vmlist traversal (only /proc/kcore).

Since we don't support /proc/kcore on nommu, that leaves the
vfree()/kfree() determination use cases. nommu vfree() happens to be a
wrapper to kfree() anyways, so is_vmalloc_addr() can always return 0
and end up with the right behaviour.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

<linux/mm.h> didn't pickup the definition of PKMAP_BASE from fixmap.h, ugh.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

TX39XX's "reserved" segment in CKSEG3 area is 0xff000000-0xfffeffff.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

We support now other page sizes as well.
Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

With KBUILD_DEFCONFIG we don't have to ship a second copy of ip22_defconfig.
Signed-off-by: Adrian Bunk <adrian.bunk@movial.fi>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This allows a 48Hz clock to be selected on Malta and other systems.  Note
this not normally a sensible option as it results in rather high latencies
for some kernel stuff.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Some of these are architecturally required for R2 processors so lets try
to be bit closer to the real thing.  This also provides access to the
CPU cycle timer, even on multiprocessors.  In that aspect its currently
bug compatible to what would happen on a R2-based SMP.
Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

0 is a valid device id (DSCR_CMD0_UART0_TX), so we can't use it to mark
an empty entry in the device table. Use ~0 instead and search for id ~0
when looking for a free entry.
Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Let driver authors know that drivers/i2c/chips is usually the wrong place
for new drivers.
Signed-off-by: Jean Delvare <khali@linux-fr.org>