- 18 Apr, 2017 31 commits
-
-
David Sterba authored
We can preallocate the node so insertion does not have to do that under the lock. The GFP flags for the per-device radix tree are initialized to GFP_NOFS & ~__GFP_DIRECT_RECLAIM but we can use GFP_KERNEL, same as an allocation above anyway, but also because readahead is optional and not on any critical writeout path. Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Hans van Kranenburg authored
The btrfs_balance_args are only used for the balance ioctl, so use __u instead of __le here for consistency. The __le usage was introduced in bc309467 and dee32d0a and was probably a result of copy/pasting when the code was written. The usage of __le did not break anything, but it's unnecessary. Also, this change makes the code less confusing for the careful reader. Signed-off-by:
Hans van Kranenburg <hans.van.kranenburg@mendix.com> Reviewed-by:
-
Goldwyn Rodrigues authored
Code cleanup. The code block is for !(*flags & MS_RDONLY). We don't need to check it again. Signed-off-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
Liu Bo authored
We also don't bother to flush free space cache while with free space tree. Cc: David Sterba <dsterba@suse.cz> Signed-off-by:
-
Liu Bo authored
These two BUG_ON()s would never be true, ensured by callers' logic. Reviewed-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by:
-
Liu Bo authored
This adds a helper to show directly whether ops require full stripe. Reviewed-by:
-
Liu Bo authored
With this, we can avoid allocating memory for dev replace copies if the target dev is not available. Reviewed-by:
-
Liu Bo authored
Since this part is mostly independent, this moves it to a separate function. Reviewed-by:
-
Liu Bo authored
As the part of getting extra mirror in __btrfs_map_block is independent, this puts it into a separate function. Reviewed-by:
-
Liu Bo authored
Since DISCARD is not as important as an operation like write, we don't copy it to target device during replace, and it makes __btrfs_map_block less complex. Signed-off-by:
-
Liu Bo authored
We have similar code here and there, this merges them into a helper. Signed-off-by:
-
Liu Bo authored
While debugging truncate problems, I found that these tracepoints could help us quickly know what went wrong. Two sets of tracepoints are created to track regular/prealloc file item and inline file item respectively, I put inline as a separate one since what inline file items cares about are way less than the regular one. This adds four tracepoints: - btrfs_get_extent_show_fi_regular - btrfs_get_extent_show_fi_inline - btrfs_truncate_show_fi_regular - btrfs_truncate_show_fi_inline Cc: David Sterba <dsterba@suse.cz> Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
Elena Reshetova <elena.reshetova@intel.com> Signed-off-by:
Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
David Windsor <dwindsor@gmail.com> Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Liu Bo authored
After 76b42abb ("Btrfs: fix data loss after truncate when using the no-holes feature"), For either NO_HOLES or inline extents, we've set last_size to newsize to avoid data loss after remount or inode got evicted and read again, thus, we don't need this check anymore. Signed-off-by:
-
Adam Borowski authored
If your filesystem has, eg, data:raid0 metadata:raid1, and you run "btrfs balance -dconvert=raid1", the meta.target field will be uninitialized. That's otherwise ok, as it's unused except for this warning. Thus, let's use the existing set of raid levels for the comparison. As a side effect, non-convert balances will now nag about data>metadata. Signed-off-by:
Adam Borowski <kilobyte@angband.pl> Reviewed-by:
-
Dmitry V. Levin authored
Add file entries for btrfs header files. Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Acked-by:
-
- 16 Apr, 2017 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Again, a batch that's been sitting a couple of weeks, mostly because I anticipated a bit more material but it didn't show up -- which is good. These are all your garden variety fixes for ARM platforms. The most visible issue fixed here is probably the SMP reset issue on OMAP, the rest are minor stuff" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: allwinner: a64: add pmu0 regs for USB PHY ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer reset: add exported __reset_control_get, return NULL if optional ARM: orion5x: only call into phylib when available ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend ARM: dts: ti: fix PCI bus dtc warnings ARM: dts: am335x-baltos: disable EEE for Atheros 8035 PHY ARM: dts: OMAP3: Fix MFG ID EEPROM ARM: sun8i: a33: add operating-points-v2 property to all nodes ARM: sun8i: a33: remove highest OPP to fix CPU crashes
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Four small fixes. Three of them fix the same error in NVMe, in loop, fc, and rdma respectively. The last fix from Ming fixes a regression in this series, where our bvec gap logic was wrong and causes an oops on NVMe for certain conditions" * 'for-linus' of git://git.kernel.dk/linux-block: block: fix bio_will_gap() for first bvec with offset nvme-fc: Fix sqsize wrong assignment based on ctrl MQES capability nvme-rdma: Fix sqsize wrong assignment based on ctrl MQES capability nvme-loop: Fix sqsize wrong assignment based on ctrl MQES capability
-
Olof Johansson authored
Merge tag 'omap-for-v4.11/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Regression fix for omap interconnect code for deferred probe. Without this fix we can get PM related warnings for devices that use deferred probe. If necessary, this fix can wait for the v4.12 merge window no problem. * tag 'omap-for-v4.11/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend ARM: dts: ti: fix PCI bus dtc warnings ARM: dts: am335x-baltos: disable EEE for Atheros 8035 PHY ARM: dts: OMAP3: Fix MFG ID EEPROM Signed-off-by:
Olof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup fix from Tejun Heo: "Unfortunately, the commit to fix the cgroup mount race in the previous pull request can lead to hangs. The original bug has been around for a while and isn't too likely to be triggered in usual use cases. Revert the commit for now" * 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: Revert "cgroup: avoid attaching a cgroup root to two different superblocks"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty fix from Greg KH: "Here is a single tty core revert for a patch that was reported to cause problems. The original issue is one that we have lived with for decades, so trying to scramble to fix the fix in time for 4.11-final does not make sense due to the fragility of the tty ldisc layer. Just reverting it makes sense for now" * tag 'tty-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: don't panic on OOM in tty_set_ldisc()"
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull ftrace fix from Steven Rostedt: "While rewriting the function probe code, I stumbled over a long standing bug. This bug has been there sinc function tracing was added way back when. But my new development depends on this bug being fixed, and it should be fixed regardless as it causes ftrace to disable itself when triggered, and a reboot is required to enable it again. The bug is that the function probe does not disable itself properly if there's another probe of its type still enabled. For example: # cd /sys/kernel/debug/tracing # echo schedule:traceoff > set_ftrace_filter # echo do_IRQ:traceoff > set_ftrace_filter # echo \!do_IRQ:traceoff > /debug/tracing/set_ftrace_filter # echo do_IRQ:traceoff > set_ftrace_filter The above registers two traceoff probes (one for schedule and one for do_IRQ, and then removes do_IRQ. But since there still exists one for schedule, it is not done properly. When adding do_IRQ back, the breakage in the accounting is noticed by the ftrace self tests, and it causes a warning and disables ftrace" * tag 'trace-v4.11-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix removing of second function probe -
Tejun Heo authored
This reverts commit bfb0b80d. Andrei reports CRIU test hangs with the patch applied. The bug fixed by the patch isn't too likely to trigger in actual uses. Revert the patch for now. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Andrei Vagin <avagin@virtuozzo.com> Link: http://lkml.kernel.org/r/20170414232737.GC20350@outlook.office365.com
-
- 15 Apr, 2017 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull nvdimm fixes from Dan Williams: "A small crop of lockdep, sleeping while atomic, and other fixes / band-aids in advance of the full-blown reworks targeting the next merge window. The largest change here is "libnvdimm: fix blk free space accounting" which deletes a pile of buggy code that better testing would have caught before merging. The next change that is borderline too big for a late rc is switching the device-dax locking from rcu to srcu, I couldn't think of a smaller way to make that fix. The __copy_user_nocache fix will have a full replacement in 4.12 to move those pmem special case considerations into the pmem driver. The "libnvdimm: band aid btt vs clear poison locking" commit admits that our error clearing support for btt went in broken, so we just disable it in 4.11 and -stable. A replacement / full fix is in the pipeline for 4.12 Some of these would have been caught earlier had DEBUG_ATOMIC_SLEEP been enabled on my development station. I wonder if we should have: config DEBUG_ATOMIC_SLEEP default PROVE_LOCKING ...since I mistakenly thought I got both with PROVE_LOCKING=y. These have received a build success notification from the 0day robot, and some have appeared in a -next release with no reported issues" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: x86, pmem: fix broken __copy_user_nocache cache-bypass assumptions device-dax: switch to srcu, fix rcu_read_lock() vs pte allocation libnvdimm: band aid btt vs clear poison locking libnvdimm: fix reconfig_mutex, mmap_sem, and jbd2_handle lockdep splat libnvdimm: fix blk free space accounting acpi, nfit, libnvdimm: fix interleave set cookie calculation (64-bit comparison)
-
