- 09 Aug, 2012 40 commits
-
-
Joe Thornber authored
commit 905386f8 upstream. Fix memory leak in process_prepared_mapping by always freeing the dm_thin_new_mapping structs from the mapping_pool mempool on the error paths. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alasdair G Kergon authored
commit 7768ed33 upstream. Reduce the slab size used for the dm_thin_endio_hook mempool. Allocation has been seen to fail on machines with smaller amounts of memory due to fragmentation. lvm: page allocation failure. order:5, mode:0xd0 device-mapper: table: 253:38: thin-pool: Error creating pool's endio_hook mempool Signed-off-by:
-
Josh Boyer authored
commit 8ded2bbc upstream. Recently, glibc made a change to suppress sign-conversion warnings in FD_SET (glibc commit ceb9e56b3d1). This uncovered an issue with the kernel's definition of __NFDBITS if applications #include <linux/types.h> after including <sys/select.h>. A build failure would be seen when passing the -Werror=sign-compare and -D_FORTIFY_SOURCE=2 flags to gcc. It was suggested that the kernel should either match the glibc definition of __NFDBITS or remove that entirely. The current in-kernel uses of __NFDBITS can be replaced with BITS_PER_LONG, and there are no uses of the related __FDELT and __FDMASK defines. Given that, we'll continue the cleanup that was started with commit 8b3d1cda ("posix_types: Remove fd_set macros") and drop the remaining unused macros. Additionally, linux/time.h has similar macros defined that expand to nothing so we'll remove those at the same time. Reported-by:
Jeff Law <law@redhat.com> Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Josh Boyer <jwboyer@redhat.com> [ .. and fix up whitespace as per akpm ] Signed-off-by:
-
Marcin Slusarz authored
commit 71585545 upstream. Fixes kernel panic when vblank interrupt triggers before first sync to vblank request. (Besides init, remove some relevant leftovers from vblank rework) Reported-by:
Ortwin Glück <odi@odi.ch> Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Jerome Glisse authored
commit fcedac67 upstream. The external encoder need to be setup again before enabling the transmiter. This seems to be only needed on some trinity/aruba to fix dpms on. v2: Add comment, only setup again on dce6 ie aruba or newer. Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Jerome Glisse authored
commit ca2ccde5 upstream. To have DP behave like VGA/DVI we need to retrain the link on hotplug. For this to happen we need to force link training to happen by setting connector dpms to off before asking it turning it on again. v2: agd5f - drop the dp_get_link_status() change in atombios_dp.c for now. We still need the dpms OFF change. Signed-off-by:
-
Jerome Glisse authored
commit 266dcba5 upstream. No need to retrain the link for passive adapters. v2: agd5f - no passive DP to VGA adapters, update comments - assign radeon_connector_atom_dig after we are sure we have a digital connector as analog connectors have different private data. - get new sink type before checking for retrain. No need to check if it's no longer a DP connection. Signed-off-by:
-
Jerome Glisse authored
commit 8d1c702a upstream. We want to print link status query failed only if it's an unexepected fail. If we query to see if we need link training it might be because there is nothing connected and thus link status query have the right to fail in that case. To avoid printing failure when it's expected, move the failure message to proper place. Signed-off-by:
-
Michel Dänzer authored
commit f60ec4c7 upstream. This could previously fail if either of the enabled displays was using a horizontal resolution that is a multiple of 128, and only the leftmost column of the cursor was (supposed to be) visible at the right edge of that display. The solution is to move the cursor one pixel to the left in that case. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33183Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
-
Jerome Glisse authored
commit d1c7871d upstream. Retry label was at wrong place in function leading to memory leak. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Christian König authored
commit 93bf888c upstream. Don't return success if scheduling the IB fails, otherwise we end up with an oops in ttm_eu_fence_buffer_objects. Signed-off-by:
Christian König <deathsimple@vodafone.de> Reviewed-by:
-
Michael Chan authored
commit 0f566b20 upstream. Spinlock should be taken before checking for tp->hw_stats. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Michael Chan authored
commit 10ce95d6 upstream. The workaround was mis-applied to all 5719 and 5720 chips. Signed-off-by:
-
Greg KH authored
commit 02eca3f5 upstream. The Apple Thunderbolt ethernet device is already listed in the driver, but not hooked up in the MODULE_DEVICE_TABLE(). This fixes that and allows it to work properly. Signed-off-by:
-
Frank Blaschka authored
commit eabfbe62 upstream. Commit efc73f4b "net: Fix memory leak - vlan_info struct" adds deletion of VLAN 0 for devices with feature NETIF_F_HW_VLAN_FILTER. For driver qeth these are the layer 3 devices. Usually there exists no separate vlan net_device for VLAN 0. Thus the qeth functions qeth_l3_free_vlan_addresses4() and qeth_l3_free_vlan_addresses6() require an extra checking if function __vlan_find_dev_deep() returns with a net_device. Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
-
Virupax Sadashivpetimath authored
commit fd316941 upstream. Commit ffbbdd21 "spi: create a message queueing infrastructure" Accidentally deleted the logic to disable the port when unused leading to higher power consumption. Fix this up. Cc: Vinit Shenoy <vinit.shenoy@st.com> Signed-off-by:
Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Jeff Layton authored
commit 764a1b1a upstream. The readpages bug is a regression that was introduced in 6993f74a. This also fixes a couple of similar bugs in the uncached read and write codepaths. Also, prevent this sort of thing in the future by having cifsFileInfo_get take the spinlock itself, and adding a _locked variant for use in places that are already holding the lock. The _put code has always done that so this makes for a less confusing interface. Reviewed-by:
Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Jeff Layton authored
commit 7659624f upstream. sec=ntlmv2 as a mount option got dropped in the mount option overhaul. Cc: Sachin Prabhu <sprabhu@redhat.com> Reported-by:
Günter Kukkukk <linux@kukkukk.com> Signed-off-by:
-
Chris Mason authored
commit e9fbcb42 upstream. Each ordered operation has a free callback, and this was called with the worker spinlock held. Josef made the free callback also call iput, which we can't do with the spinlock. This drops the spinlock for the free operation and grabs it again before moving through the rest of the list. We'll circle back around to this and find a cleaner way that doesn't bounce the lock around so much. Signed-off-by:
Chris Mason <chris.mason@fusionio.com> Signed-off-by:
-
Kay Sievers authored
commit 70498253 upstream. Reserve PREFIX_MAX bytes in the LOG_LINE_MAX line when buffering a continuation line, to be able to properly prefix the LOG_LINE_MAX line with the syslog prefix and timestamp when printing it. Reported-By:
Dave Jones <davej@redhat.com> Signed-off-by:
Kay Sievers <kay@vrfy.org> Signed-off-by:
-
Lan Tianyu authored
commit f197ac13 upstream. In the ac.c, power_supply_register()'s return value is not checked. As a result, the driver's add() ops may return success even though the device failed to initialize. For example, some BIOS may describe two ACADs in the same DSDT. The second ACAD device will fail to register, but ACPI driver's add() ops returns sucessfully. The ACPI device will receive ACPI notification and cause OOPS. https://bugzilla.redhat.com/show_bug.cgi?id=772730Signed-off-by:
Lan Tianyu <tianyu.lan@intel.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Jean Delvare authored
commit f712c71f upstream. Many firmwares have a common register definition bug where 8-bit access width is specified for a 32-bit register. Ideally this should be fixed in the BIOS, but earlier versions of the kernel did not complain, so fix that up silently. This closes kernel bug #43282: https://bugzilla.kernel.org/show_bug.cgi?id=43282Signed-off-by:
Jean Delvare <jdelvare@suse.de> Acked-by:
Huang Ying <ying.huang@intel.com> Acked-by:
Gary Hade <garyhade@us.ibm.com> Signed-off-by:
-
Tejun Heo authored
commit 65758202 upstream. Currently, all workqueue cpu hotplug operations run off CPU_PRI_WORKQUEUE which is higher than normal notifiers. This is to ensure that workqueue is up and running while bringing up a CPU before other notifiers try to use workqueue on the CPU. Per-cpu workqueues are supposed to remain working and bound to the CPU for normal CPU_DOWN_PREPARE notifiers. This holds mostly true even with workqueue offlining running with higher priority because workqueue CPU_DOWN_PREPARE only creates a bound trustee thread which runs the per-cpu workqueue without concurrency management without explicitly detaching the existing workers. However, if the trustee needs to create new workers, it creates unbound workers which may wander off to other CPUs while CPU_DOWN_PREPARE notifiers are in progress. Furthermore, if the CPU down is cancelled, the per-CPU workqueue may end up with workers which aren't bound to the CPU. While reliably reproducible with a convoluted artificial test-case involving scheduling and flushing CPU burning work items from CPU down notifiers, this isn't very likely to happen in the wild, and, even when it happens, the effects are likely to be hidden by the following successful CPU down. Fix it by using different priorities for up and down notifiers - high priority for up operations and low priority for down operations. Workqueue cpu hotplug operations will soon go through further cleanup. Signed-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
"Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by:
-
Ben Hutchings authored
commit 069f101f upstream. ZSMALLOC is tristate, but the code has no MODULE_LICENSE and since it depends on GPL-only symbols it cannot be loaded as a module. This in turn breaks zram which now depends on it. I assume it's meant to be Dual BSD/GPL like the other z-stuff. There is also no module_exit, which will make it impossible to unload. Add the appropriate module_init and module_exit declarations suggested by comments. Reported-by:
Christian Ohm <chr.ohm@gmx.net> References: http://bugs.debian.org/677273Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Reviewed-by:
Jonathan Nieder <jrnieder@gmail.com> Signed-off-by:
-
Paul Gortmaker authored
commit 2584f521 upstream. Also add information on where the respective trees are. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by:
Rob Landley <rob@landley.net> Signed-off-by:
-
Jan Kara authored
commit 57b9655d upstream. When a partition table length is corrupted to be close to 1 << 32, the check for its length may overflow on 32-bit systems and we will think the length is valid. Later on the kernel can crash trying to read beyond end of buffer. Fix the check to avoid possible overflow. Reported-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Joerg Roedel authored
commit 2c9195e9 upstream. This did not work because devices are not put into the pt_domain. Fix this. Signed-off-by:
Joerg Roedel <joerg.roedel@amd.com> Signed-off-by:
-
Joerg Roedel authored
commit 2c13d47a upstream. Add missing spin_lock initialization in amd_iommu_bind_pasid() function and make lockdep happy again. Signed-off-by:
-
Tejun Heo authored
commit ce27e317 upstream. While refactoring cgroup file removal path, 05ef1d7c "cgroup: introduce struct cfent" incorrectly changed the @dir argument of simple_unlink() to the inode of the file being deleted instead of that of the containing directory. The effect of this bug is minor - ctime and mtime of the parent weren't properly updated on file deletion. Fix it by using @cgrp->dentry->d_inode instead. Signed-off-by:
Al Viro <viro@ZenIV.linux.org.uk> Acked-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
-
Heiko Carstens authored
commit 008c2e8f upstream. Make sure the kernel does not incorrectly create a SIGBUS signal during user space accesses: For user space accesses in the switched addressing mode case the kernel may walk page tables and access user address space via the kernel mapping. If a page table entry is invalid the function __handle_fault() gets called in order to emulate a page fault and trigger all the usual actions like paging in a missing page etc. by calling handle_mm_fault(). If handle_mm_fault() returns with an error fixup handling is necessary. For the switched addressing mode case all errors need to be mapped to -EFAULT, so that the calling uaccess function can return -EFAULT to user space. Unfortunately the __handle_fault() incorrectly calls do_sigbus() if VM_FAULT_SIGBUS is set. This however should only happen if a page fault was triggered by a user space instruction. For kernel mode uaccesses the correct action is to only return -EFAULT. So user space may incorrectly see SIGBUS signals because of this bug. For current machines this would only be possible for the switched addressing mode case in conjunction with futex operations. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
commit 0f6f281b upstream. The downgrade of the 4 level page table created by init_new_context is currently done only in start_thread31. If a 31 bit process forks the new mm uses a 4 level page table, including the task size of 2<<42 that goes along with it. This is incorrect as now a 31 bit process can map memory beyond 2GB. Define arch_dup_mmap to do the downgrade after fork. Signed-off-by:
-
Heiko Carstens authored
commit 0008204f upstream. The s390 idle accounting code uses a sequence counter which gets used when the per cpu idle statistics get updated and read. One assumption on read access is that only when the sequence counter is even and did not change while reading all values the result is valid. On cpu hotplug however the per cpu data structure gets initialized via a cpu hotplug notifier on CPU_ONLINE. CPU_ONLINE however is too late, since the onlined cpu is already running and might access the per cpu data. Worst case is that the data structure gets initialized while an idle thread is updating its idle statistics. This will result in an uneven sequence counter after an update. As a result user space tools like top, which access /proc/stat in order to get idle stats, will busy loop waiting for the sequence counter to become even again, which will never happen until the queried cpu will update its idle statistics again. And even then the sequence counter will only have an even value for a couple of cpu cycles. Fix this by moving the initialization of the per cpu idle statistics to cpu_init(). I prefer that solution in favor of changing the notifier to CPU_UP_PREPARE, which would be a different solution to the problem. Signed-off-by:
-
Amitkumar Karwar authored
commit fe020120 upstream. mwifiex driver supports 2x2 chips as well. Hence valid mcs values are 0 to 15. The check for mcs index is corrected in this patch. For example: if 40MHz is enabled and mcs index is 11, "iw link" command would show "tx bitrate: 108.0 MBit/s" without this patch. Now it shows "tx bitrate: 108.0 MBit/s MCS 11 40Mhz" with the patch. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Forest Bond authored
commit f1b00f4d upstream. Commit d83579e2 incorporated some changes from the vendor driver that made it newly important that the calculated hardware version correctly include the CHIP_92D bit, as all of the IS_92D_* macros were changed to depend on it. However, this bit was being unset for dual-mac, dual-phy devices. The vendor driver behavior was modified to not do this, but unfortunately this change was not picked up along with the others. This caused scanning in the 2.4GHz band to be broken, and possibly other bugs as well. This patch brings the version calculation logic in parity with the vendor driver in this regard, and in doing so fixes the regression. However, the version calculation code in general continues to be largely incoherent and messy, and needs to be cleaned up. Signed-off-by:
Forest Bond <forest.bond@rapidrollout.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Larry Finger authored
commit 3ce4d85b upstream. In commit a7959c13, the USB part of rtlwifi was switched to convert _usb_read_sync() to using a preallocated buffer rather than one that has been acquired using kmalloc. Although this routine is named as though it were synchronous, there seem to be simultaneous users, and the selection of the index to the data buffer is not multi-user safe. This situation is addressed by adding a new spinlock. The routine cannot sleep, thus a mutex is not allowed. Signed-off-by:
-
Cloud Ren authored
commit fa0afcd1 upstream. When io access mode is enabled by BOOTROM or BIOS for AR8152 v2.1, the register can't be read/write by memory access mode. Clearing Bit 8 of Register 0x21c could fixed the issue. Signed-off-by:
Cloud Ren <cjren@qca.qualcomm.com> Signed-off-by:
xiong <xiong@qca.qualcomm.com> Signed-off-by:
-
Meenakshi Venkataraman authored
commit a35e2708 upstream. We missed passing an argument to the debug print. Fix it. Signed-off-by:
Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Ilan Peer authored
commit e19ebcab upstream. It is possible that the BSS context is not active (for example when the current mode is set to GO), or that the vif->type is different than station. In such a case we cannot call mac80211 to report the average rssi for the interface (the function assumes that the vif is valid and that the type is station). Reported-by:
Daniel J Blueman <daniel@quora.org> Reviewed-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Eliad Peller authored
commit dac211ec upstream. ieee80211_rx_mgmt_auth() doesn't handle denied authentication properly - it authenticates the station and waits for association (for 5 seconds) instead of failing the authentication. Fix it by destroying auth_data and bailing out instead. Signed-off-by:
Eliad Peller <eliad@wizery.com> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Christian Lamparter authored
commit 353d09c6 upstream. ieee802_1d_to_ac is defined as a const int[8], but the tid parameter has a range from 0 to 15. Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
