This replaces uses of new_encode_dev/new_decode_dev with their 64-bit
counterparts, huge_encode_dev/huge_decode_dev respectively.

This is just for clarification and has no impact on the disk format.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

deactivate_super was replaced with deactivate_locked_super, but the
comment of nilfs_get_sb remain unchanged.  This renews the comment.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

MS_VERBOSE is deprecated.  This replaces it with MS_SILENT in
reference to get_sb_bdev function.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

An fmode_t argument is passed to kill_block_super() through s_mode
member of the super_block structure.  This is used to release the
block device with the same mode, however, nilfs does not set s_mode
anywhere.

This modifies nilfs_get_sb function to properly initialize the s_mode
member.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

The second argument of open_bdev_exclusive/close_bdev_exclusive takes
fmode_t flags instead of mount flags.  This fixes the misuse.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Current s_volume_name has 16 bytes, which is too small as modern filesystem.

s_last_mounted resides just after s_volume_name and has 64 bytes.

s_last_mounted is historically came from ext2, but not used in nilfs2 at all.
Deleting s_last_mounted member and merging that space with s_volume_name
enlarge s_volume_name upto 80 bytes for volume label.

When user land tools see the old header for new disk, it will just ignore
additional bytes stored in s_last_mounted.  While, old disk format has only
16 bytes label, it doesn't affects in case seeing the new header for old disk.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Nilfs maintains two super blocks, and selects the new one on mount
time if they both have valid checksums and their timestamps differ.

However, this has potential for mis-selection since the system clock
may be rewinded and the resolution of the timestamps is not high.

Usually this doesn't become an issue because both super blocks are
updated at the same time when the file system is unmounted.  Even if
the file system wasn't unmounted cleanly, the roll-forward recovery
will find the proper log which stores the latest super root.  Thus,
the issue can appear only if update of one super block fails and the
clock happens to be rewinded.

This fixes the issue by using checkpoint numbers instead of timestamps
to pick the super block storing the location of the latest log.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This adds missing endian conversions in comparision of the magic
number of super blocks.  It was coincidence that prior versions didn't
incur problems; the upper byte of the magic number happened to be
equal to the lower byte.  But, semantically it's wrong to depend on
this.

This won't change anything else nor suffer any compatibility issues.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This kills the following sparse warnings:

fs/nilfs2/segment.c:567:28: warning: symbol 'nilfs_sc_file_ops' was not declared. Should it be static?
fs/nilfs2/segment.c:617:28: warning: symbol 'nilfs_sc_dat_ops' was not declared. Should it be static?
fs/nilfs2/segment.c:625:28: warning: symbol 'nilfs_sc_dsync_ops' was not declared. Should it be static?
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

The implementation of persistent object allocator (alloc.c) is poorly
documented.  This adds kernel doc style comments on that functions.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

In nilfs_segctor_thread(), timer is a local variable allocated on stack. Its
address can't be set to sci->sc_timer and passed in several procedures.

It works now by chance, just because other procedures are called by
nilfs_segctor_thread() directly or indirectly and the stack hasn't been
deallocated yet.
Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

There are only two lines of code in nilfs_segctor_init(). From a logic
design view, the first line 'sci->sc_seq_done = sci->sc_seq_request;'
should be put in nilfs_segctor_new(). Even in nilfs_segctor_new(),
this initialization is needless because sci is kzalloc-ed. So
nilfs_segctor_init() is only a wrap call to
nilfs_segctor_start_thread().
Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This adds a field to record the latest checkpoint number in the
nilfs_segment_summary structure.  This will help to recover the latest
checkpoint number from logs on disk.  This field is intended for
crucial cases in which super blocks have lost pointer to the latest
log.

Even though this will change the disk format, both backward and
forward compatibility is preserved by a size field prepared in the
segment summary header.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Printing a message after loading a file system is a practice. Add this to
provide a better user-friendly experience.
Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This cleanup patch gives several improvements:

 - Moving all kmem_cache_{create_destroy} calls into one place, which removes
 some small function calls, cleans up error check code and clarify the logic.

 - Mark all initial code in __init section.

 - Remove some very obvious comments.

 - Adjust some declarations.

 - Fix some space-tab issues.
Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This moves out checksum routines in log writer to segbuf.c for
cleanup.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This moves a pointer to buffer storing super root block to each log
buffer from nilfs_sc_info struct for simplicity.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Like ext3, nilfs has 'errors' mount option to allow specifying desired
behavior on severe errors.

Currently, the default action is 'errors=continue' and has potential
to advance filesystem corruption for severe errors.

This will change the action to 'errors=remount-ro' to avoid the issue.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

nilfs_btree_release_path() and nilfs_btree_free_path() are bound into each other
tightly. Make them into one procedure to clearify the logic and avoid some
misusages.
Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

nilfs_btree_alloc_path() and nilfs_btree_init_path() are bound into each other
tightly. Make them into one procedure to clearify the logic and avoid some
misusages.
Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This kills the following checkpatch warnings:

WARNING: please, no space before tabs
+^I__le32^Is_first_ino; ^I^I/* First non-reserved inode */$

WARNING: please, no space before tabs
+^I__le16  s_inode_size; ^I^I/* Size of an inode */$

WARNING: please, no space before tabs
+^Ichar^Is_volume_name[16]; ^I/* volume name */$

WARNING: please, no space before tabs
+^Ichar^Is_last_mounted[64]; ^I/* directory where last mounted */$
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

The comment of struct nilfs_dat_entry is mismatched, fix it.
Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] Retry commands with UNIT_ATTENTION sense codes to fix ext3/ext4 I/O error
  [SCSI] Enable retries for SYNCRONIZE_CACHE commands to fix I/O error
  [SCSI] scsi_debug: virtual_gb ignores sector_size
  [SCSI] libiscsi: regression: fix header digest errors
  [SCSI] fix locking around blk_abort_request()
  [SCSI] advansys: fix narrow board error path

commit 672917dc ("cpuidle: menu governor: reduce latency on exit")
added an optimization, where the analysis on the past idle period moved
from the end of idle, to the beginning of the new idle.

Unfortunately, this optimization had a bug where it zeroed one key
variable for new use, that is needed for the analysis.  The fix is
simple, zero the variable after doing the work from the previous idle.

During the audit of the code that found this issue, another issue was
also found; the ->measured_us data structure member is never set, a
local variable is always used instead.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Corrado Zoccolo <czoccolo@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://neil.brown.name/md:
  md: restore ability of spare drives to spin down.
  md/raid6: Fix raid-6 read-error correction in degraded state

* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: fix compilation after 16bit state locking changes
  pcmcia: order userspace suspend and resume requests
  pcmcia: avoid pccard_validate_cis failure in resume callpath

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  blk-cgroup: Fix an RCU warning in blkiocg_create()
  blk-cgroup: Fix RCU correctness warning in cfq_init_queue()
  drbd: don't expose failed local READ to upper layers

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/ttm: Remove the ttm_bo_block_reservation() function.
  drm/ttm: Remove some leftover debug messages.
  drm/radeon: async event synchronization for drmWaitVblank

Move initialization of the virtio framework before the initialization of
mtd, so that block2mtd can be used on virtio-based block devices.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=15644Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: Fix RCU issues in the NFSv4 delegation code
  NFSv4: Fix the locking in nfs_inode_reclaim_delegation()

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: sleep: init_set_sci_en_on_resume for Dell Studio 155x
  ACPI: fix acpi_hest_firmware_first_pci() caused oops
  sbshc: acpi_device_class "smbus_host_controller" too long
  power_meter: acpi_device_class "power_meter_resource" too long
  acpi_pad: "processor_aggregator" name too long
  PNP: don't check for conflicts with bridge windows
  ACPI: DMI init_set_sci_en_on_resume for multiple Lenovo ThinkPads
  PNPACPI: compute Address Space length rather than using _LEN
  ACPI: silence kmemcheck false positive

* 'v4l_for_2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  V4L/DVB: pxa_camera: move fifo reset direct before dma start
  V4L/DVB: video: testing unsigned for less than 0
  V4L/DVB: mx1-camera: compile fix
  V4L/DVB: budget: Oops: "BUG: unable to handle kernel NULL pointer 	dereference"
  V4L/DVB: ngene: Workaround for stuck DiSEqC pin
  V4L/DVB: saa7146: fix regression of the av7110/budget-av driver
  V4L/DVB: v4l: fix config dependencies: mxb and saa7191 are V4L2 drivers, not V4L1
  V4L/DVB: feature-removal: announce videotext.h removal
  V4L/DVB: V4L - vpfe capture - fix for kernel crash
  V4L/DVB: gspca: make usb id 0461:0815 get handled by the right driver
  V4L/DVB: gspca - stv06xx: Remove the 046d:08da from the stv06xx driver
  V4L/DVB: gspca - sn9c20x: Correct onstack wait_queue_head declaration
  V4L/DVB: saa7146: fix up bytesperline if it is an impossible value
  V4L/DVB: V4L: vpfe_capture - free ccdc_lock when memory allocation fails
  V4L/DVB: V4L - Makfile:Removed duplicate entry of davinci
  V4L/DVB: omap24xxcam: potential buffer overflow

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: create rcu_my_thread_group_empty() wrapper
  memcg: css_id() must be called under rcu_read_lock()
  cgroup: Check task_lock in task_subsys_state()
  sched: Fix an RCU warning in print_task()
  cgroup: Fix an RCU warning in alloc_css_id()
  cgroup: Fix an RCU warning in cgroup_path()
  KEYS: Fix an RCU warning in the reading of user keys
  KEYS: Fix an RCU warning

Some time ago we stopped the clean/active metadata updates
from being written to a 'spare' device in most cases so that
it could spin down and say spun down.  Device failure/removal
etc are still recorded on spares.

However commit 51d5668c broke this 50% of the time,
depending on whether the event count is even or odd.
The change log entry said:

   This means that the alignment between 'odd/even' and
    'clean/dirty' might take a little longer to attain,

how ever the code makes no attempt to create that alignment, so it
could take arbitrarily long.

So when we find that clean/dirty is not aligned with odd/even,
force a second metadata-update immediately.  There are already cases
where a second metadata-update is needed immediately (e.g. when a
device fails during the metadata update).  We just piggy-back on that.
Reported-by: Joe Bryant <tenminjoe@yahoo.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@kernel.org

Fix: Raid-6 was not trying to correct a read-error when in
singly-degraded state and was instead dropping one more device, going to
doubly-degraded state. This patch fixes this behaviour.
Tested-by: Janos Haar <janos.haar@netcenter.hu>
Signed-off-by: Gabriele A. Trombetti <g.trombetti.lkrnl1213@logicschema.com>
Reported-by: Janos Haar <janos.haar@netcenter.hu>
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@kernel.org

with CONFIG_PROVE_RCU=y, a warning can be triggered:

  # mount -t cgroup -o blkio xxx /mnt
  # mkdir /mnt/subgroup

...
kernel/cgroup.c:4442 invoked rcu_dereference_check() without protection!
...

To fix this, we avoid caling css_depth() here, which is a bit simpler
than the original code.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Merge branches 'bugzilla-14337', 'bugzilla-14998', 'bugzilla-15407', 'bugzilla-15903' and 'misc-2.6.34' into release

It's unused and buggy in its current form, since it can place a bo
in the reserved state without removing it from lru lists.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>