- 17 Dec, 2013 15 commits
-
-
Ville Syrjälä authored
Linetime watermarks don't exist on ILK/SNB/IVB, so don't compute them except on HSW. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
ILK has a bunch of issues with FBC. First of all, BSpec tells us that FBC WM should never be enabled. Secondly when FBC is enabled with FBC WM disabled, LP2+ watermarks must be disabled. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Multi-pipe LP1+ watermarks are a HSW+ feature, so let's not do it on earlier generations. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
On ILK disabling LP1+ watermarks must be done carefully to avoid underruns. If we just write 0 to the register in the middle of the scan cycle we often get an underrun. So instead we have to leave the actual watermark levels in the register intact, and just toggle the enable bit. Presumably the hardware takes a while to get out of low power mode, and so the watermark level need to stay valid until that time. We also have to be careful with the WM1S_LP_EN bit. It seems the hardware more or less treats it like the actual watermarks numbers, and so we must not toggle it too soon. Just leave it alone when disabling the LP1+ watermarks. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
ILK/SNB don't have LP2+ watermarks for sprites. Also the LP1 sprite watermark register has its own enable bit. Take these differences into account when programming the LP1+ registers. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
On ILK/SNB only LP0/1 watermarks can be enabled when sprites are enabled, and on ILK/SNB/IVB sprite scaling is limited to LP0 only. So we can avoid computing the extra levels we're never going to use. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Add a new function ilk_wm_lp_latency() which will tell us what to write into the WM_LPx register latency field. HSW is different from erlier gens in this regard. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
On IVB the display data buffer partitioning control lives in the DISP_ARB_CTL2 register. Add the relevant defines/code for it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Otherwise we don't kick out firmware framebuffers like vesafb and efifb when CONFIG_DRM_I915_FBDEV=n but CONFIG_FB=y. There's still the pesky issue with vgacon which we should somehow replace with the dummy console at least. We have a similar issue at module un/reload, since vgacon state is terminally botched after i915.ko has loaded in modeset mode. But this gets us a step further at least. v2: Use IS_ENABLED - I always get this wrong for tristates. Spotted by Jani. Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Damien Lespiau authored
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Noticed while reviewing a patch and couldn't resist the OCD. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ben Widawsky authored
Aside from the fact that it leaves confusing dumps on error capture, it is entirely unnecessary, and potentially harmful in cases like BDW, where the instruction has changed. In reality (seemingly), this will have no behavioral impact. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ben Widawsky authored
A few command were out of numerical order and had different spacing. Put them back in numerical order, with proper spacing. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jesse Barnes authored
We only need to init the reg offset for DPIO once, but we need to reset DPIO at resume time and at init time. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jesse Barnes authored
Just add an early init since we may need to access DPIO regs early on. The init call in modeset_init_hw is also needed for the resume case, when we need to reset DPIO to keep things happy. v2: split reset and reg init v3: split patches (Daniel) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 16 Dec, 2013 3 commits
-
-
Jani Nikula authored
The whole file is wrapped around in #if defined(CONFIG_DEBUG_FS) anyway, so skip the file at the build level already. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Wei Yongjun authored
In case of error, the function debugfs_create_file() returns NULL pointer not ERR_PTR() if debugfs is enabled. The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jani Nikula authored
We don't actually do anything with the information yet, but parse and log what's in the VBT. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 14 Dec, 2013 3 commits
-
-
Paulo Zanoni authored
Now that all the infrastructure is in place and all the tests from pm_pc8 pass, we can finally enable the feature. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
So we'll get a fault when someone tries to access the mmap, then we'll wake up from D3. v2: - Rebase v3: - Use gtt active/inactive Testcase: igt/pm_pc8/gem-mmap-gtt Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> [danvet: Add comment + WARN as discussed with Paulo on irc.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
The hangcheck function requires the hardware to be working, and if we're suspending we're going to put the HW in D3 state. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 13 Dec, 2013 4 commits
-
-
Ben Widawsky authored
WaVSRefCountFullforceMissDisable and WaDSRefCountFullforceMissDisable VS is a carry-over from HSW, and DS is likely not used by anyone yet. Cc: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Line of 106 chars is too long. Really.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ben Widawsky authored
I stumbled on to some unimplemented errata. To be honest, I am not really sure of the impact, just that the docs say to do. No w/a name for this one. v2: v1 was a stale thing which should have never seen the light of day. (Haihao) Cc: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Not all registers need forcewake even if they're not shadowed. Add the missing check to gen8_writeX() to avoid needless forcewake usage when writing eg. display registers. v2: Use straight up <0x40000 check instead of NEEDS_FORCE_WAKE() Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
The BIOS or someone else might have done something bad and there might be old GT FIFO erros reported in GTFIFODBG. Clear those out in intel_uncore_early_sanitize() to make sure we don't mistake them for our problems. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 12 Dec, 2013 10 commits
-
-
Mika Kuoppala authored
If test is running, irq_get was not called so we should gain balance by not doing irq_put "So the rule is: if you access unlocked values, you use ACCESS_ONCE(). You don't say "but it can't matter". Because you simply don't know." -- Linus v2: use local variable so it can't change during test (Chris) v3: update commit msg and use ACCESS_ONCE (Ville) Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Don't touch DPFC_RECOMP_CTL on FBC2, use RMW to update the FBC_CONTROL on FBC1 to make it easier for people to experiment with different numbers. Also fix the interval mask for FBC1. v2: Rebased Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
All mobile gen2 and gen3 chipsets should have FBC1, and the code should now handle them all. So just set has_fbc=true for all such chipsets. Note that fbc is still disabled by default for now. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Gen2 and gen3 don't have the FBC_CONTROL2 register, so don't touch it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
On gen2 the compressed frame buffer pitch is specified in 32B units rather than the 64B units used on gen3+. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
The first piece, intel_ddi_pll_select, finds a PLL and assigns it to the CRTC, but doesn't write any register. It can also fail in case it doesn't find a PLL. The second piece, intel_ddi_pll_enable, uses the information stored by intel_ddi_pll_select to actually enable the PLL by writing to its register. This function can't fail. We also have some refcount sanity checks here. The idea is that one day we'll remove all the functions that touch registers from haswell_crtc_mode_set to haswell_crtc_enable, so we'll call intel_ddi_pll_select at haswell_crtc_mode_set and then call intel_ddi_pll_enable at haswell_crtc_enable. Since I'm already touching this code, let's take care of this particular split today. v2: - Clock on the debug message is in KHz - Add missing POSTING_READ Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Bikeshed comments.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Mika Kuoppala authored
Commit 094f9a54 ("drm/i915: Fix __wait_seqno to use true infinite timeouts") added support for __wait_seqno to detect missing interrupts and go around them by polling. As there is also timeout detection in __wait_seqno, the polling and timeout detection were done with the same timer. When there has been missed interrupts and polling is needed, the timer is set to trigger in (now + 1) jiffies in future, instead of the caller specified timeout. Now when io_schedule() returns, we calculate the jiffies left to timeout using the timer expiration value. As the current jiffies is now bound to be always equal or greater than the expiration value, the timeout_jiffies will become zero or negative and we return -ETIME to caller even tho the timeout was never reached. Fix this by decoupling timeout calculation from timer expiration. v2: Commit message with some sense in it (Chris Wilson) v3: add parenthesis on timeout_expire calculation v4: don't read jiffies without timeout (Chris Wilson) Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
Fixes regression introduced by: commit bf51d5e2 Author: Paulo Zanoni <paulo.r.zanoni at intel.com> Date: Wed Jul 3 17:12:13 2013 -0300 drm/i915: switch disable_power_well default value to 1 The bug I'm seeing can be reproduced with: - Have vgacon configured/enabled - Make sure the power well gets disabled, then enabled. You can check this by seeing the messages print by hsw_set_power_well - Stop your display manager - echo 0 > /sys/class/vtconsole/vtcon1/bind I can easily reproduce this by blacklising snd_hda_intel and booting with eDP+HDMI. If you do this and then look at dmesg, you'll see we're printing infinite "Unclaimed register" messages. This is happening because we're stuck on an infinite loop inside console_unlock(), which is calling many functions from vgacon.c. And the code that's triggering the error messages is from vgacon_set_cursor_size(). After we re-enable the power well, every time we read/write the VGA address 0x3d5 we get an "unclaimed register" interrupt (ERR_INT) and print error messages. If we write anything to the VGA MSR register (it doesn't really matter which value you write to bit 0), any reads/writes to 0x3d5 _don't_ trigger the "unclaimed register" errors anymore (even if MSR bit 0 is zero). So what happens with the current code is that when we unbind i915 and bind vgacon, we call console_unlock(). Function console_unlock() is responsible for printing any messages that were supposed to be print when the console was locked, so it calls the TTY layer, which calls the console layer, which calls vgacon to print the messages. At this point, vgacon eventually calls vgacon_set_cursor_size(), which touches 0x3d5, which triggers unclaimed register interrupts. The problem is that when we get these interrupts, we print the error messages, so we add more work to console_unlock(), which will try to print it again, and then call vgacon again, trigger a new interrupt, which will put more stuff to the buffer, and then we'll be stuck at console_unlock() forever. If you patch intel_uncore.c to not print anything when we detect unclaimed registers, we won't get into the console_unlock() infinite loop and the driver unbind will work just fine. We will still be getting interrupts every time vgacon touches those registers, but we will survive. This is a valid experiment, but IMHO it's not the real fix: if we don't print any error messages we will still keep getting the interrupts, and if we disable ERR_INT we won't get the interrupt anymore, but we will also stop getting all the other error interrupts. I talked about this problem with the HW engineer and his recommendation is "So don't do any VGA I/O or memory access while the power well is disabled, and make to re-program MSR after enabling the power well and before using VGA I/O or memory accesses.". Notice that this is just a partial fix to fd.o #67813. This fixes the case where the power well is already enabled when we unbind, not when it's disabled when we unbind. V2: - Rebase (first version was sent in September). V3: - Complete rewrite of the same fix: smaller implementation, improved commit message. Testcase: igt/drv_module_reload Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67813Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
I want to add more code to the post_enable function. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
It was supposed to have been killed on the same commit that killed the function, e1264ebe, but I guess the intel_drv.h reorganization accidentally brought it back. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 11 Dec, 2013 5 commits
-
-
Shobhit Kumar authored
The values of these parameters will be different for differnet panel based on dsi rate, lane count, etc. Remove the hardcodings and make these as parameters whch will be initialized in panel specific sub-encoder implementaion. This will also form groundwork for planned generic panel sub-encoder implemntation based on VBT design enhancments to support multiple panels v2: Mask away the port_bits before use Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Shobhit Kumar authored
DSI PLL will get configured during crtc_enable using ->pre_pll_enable and no need to do in ->mode_set Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Shobhit Kumar authored
Basically ULPS handling during enable/disable has been moved to pre_enable and post_disable phases. PLL and panel power disable also has been moved to post_disable phase. The ULPS entry/exit sequneces as suggested by HW team is as follows - During enable time - set DEVICE_READY --> Clear DEVICE_READY --> set DEVICE_READY And during disable time to flush all FIFOs - set ENTER_SLEEP --> EXIT_SLEEP --> ENTER_SLEEP Also during disbale sequnece sub-encoder disable is moved to the end after port is disabled. v2: Based on comments from Ville - Detailed epxlaination in the commit messgae - Moved parameter changes out into another patch - Backlight enabling will be a new patch v3: Updated as per Jani's comments - Removed the I915_WRITE_BITS as it is not needed - Moved panel_reset and send_otp_cmds hooks to dsi_pre_enable - Moved disable_panel_power hook to dsi_post_disable - Replace hardcoding with AFE_LATCHOUT v4: Make intel_dsi_device_ready and intel_dsi_clear_device_ready static Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohan.marimuthu@intel.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Shobhit Kumar authored
Basically check for both +ive and -ive deviation from target clock and pick the one with minimal error. If we get a direct match, break from loop to acheive some optimization. v2: Use signed variable for target and calculated dsi clock values Signed-off-by: Vijayakumar Balakrishnan <vijayakumar.balakrishnan@intel.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Shobhit Kumar authored
Pixel clock based calculation is recommended in the MIPI host controller documentation v2: Based on review comments from Jani and Ville - Use dsi_clk in KHz rather than converting in Hz and back to MHz - RR formula is retained though not used but return dsi_clk in KHz now - Moved the m-n-p changes into a separate patch - Removed the parameter check for intel_dsi->dsi_clock_freq. This will be bought back in if needed when appropriate panel drivers are done v3: Removed the unused mnp calculation from static table Signed-off-by: Vijayakumar Balakrishnan <vijayakumar.balakrishnan@intel.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-