- 08 May, 2019 3 commits
-
-
Pierre-Louis Bossart authored
The existing code mistakenly uses IS_ENABLED in C code instead of as in conditional compilation, leading to the following error: ld: sound/soc/sof/core.o: in function `sof_machine_check': sound/soc/sof/core.c:279: undefined reference to `sof_nocodec_setup' Fix by using #if !IS_ENABLED() Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
The SND_SOC_INTEL_COMMON Kconfig was removed months ago from SOF Kconfig files but is still selected instead of the correct SND_SOC_SOF_INTEL_COMMON kconfig which does select xtensa stuff, leading to the following errors. ld: sound/soc/sof/sof-acpi-dev.o:(.rodata+0x120): undefined reference to `sof_xtensa_arch_ops' ld: sound/soc/sof/sof-acpi-dev.o:(.rodata+0x180): undefined reference to `sof_xtensa_arch_ops' ld: sound/soc/sof/sof-acpi-dev.o:(.rodata+0x1e0): undefined reference to `sof_xtensa_arch_ops' Reported-by:
-
Takashi Iwai authored
This fixes a compile warning below by properly handling the error code from sof_get_ctrl_copy_params(): include/linux/kernel.h:843:43: warning: 'sparams.pl_size' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/soc/sof/ipc.c:639:34: note: 'sparams.pl_size' was declared here The function returns an error before setting sparams.pl_size, so it'd assign an uninitialized value at a later point. Fixes: 53e0c72d ("ASoC: SOF: Add support for IPC IO between DSP and Host") Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
- 07 May, 2019 4 commits
-
-
Takashi Iwai authored
Paper over a trivial case leading to an uninitialized variable compile warning: sound/soc/rockchip/rockchip_pdm.c:179:3: warning: ‘clk_out’ may be used uninitialized in this function [-Wmaybe-uninitialized] Fixes: 624e8e00 ("ASoC: rockchip: pdm: fixup pdm fractional div") Signed-off-by:
-
Takashi Iwai authored
A trivial fix for the randconfig build error: sound/soc/sof/ops.c:20:6: warning: ‘ret’ is used uninitialized in this function [-Wuninitialized] Fixes: d1d95fcb ("ASoC: SOF: Add DSP HW abstraction operations") Signed-off-by:
-
Takashi Iwai authored
A trivial fix for the randconfig build error: sound/soc/codecs/da7219.c:2366:6: warning: unused variable ‘i’ [-Wunused-variable] Fixes: d90ba6c8 ("ASoC: da7219: Expose BCLK and WCLK control through CCF") Signed-off-by:
-
Randy Dunlap authored
Fix kconfig warning for unmet dependency for IOSF_MBI when PCI is not set/enabled. Fixes this warning: WARNING: unmet direct dependencies detected for IOSF_MBI Depends on [n]: PCI [=n] Selected by [y]: - SND_SOC_SOF_ACPI [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_SOF_TOPLEVEL [=y] && (ACPI [=y] || COMPILE_TEST [=n]) && X86 [=y] Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: alsa-devel@alsa-project.org Acked-by:
-
- 06 May, 2019 5 commits
-
-
Olivier Moysan authored
Change trace level to debug to avoid spurious messages. Return quietly when accessing iec958 control, while no S/PDIF signal is available. Signed-off-by:
Olivier Moysan <olivier.moysan@st.com> Signed-off-by:
-
Olivier Moysan authored
- Set period minimum size. Ensure at least 5ms period up to 48kHz/16 bits to prevent underrun/overrun. - Remove MDMA constraints on period maximum size and set period maximum to half the buffer maximum size. Signed-off-by:
-
Jon Hunter authored
The max98090 driver defines 3 DAPM muxes; one for the right line output (LINMOD Mux), one for the left headphone mixer source (MIXHPLSEL Mux) and one for the right headphone mixer source (MIXHPRSEL Mux). The same bit is used for the mux as well as the DAPM enable, and although the mux can be correctly configured, after playback has completed, the mux will be reset during the disable phase. This is preventing the state of these muxes from being saved and restored correctly on system reboot. Fix this by marking these muxes as SND_SOC_NOPM. Note this has been verified this on the Tegra124 Nyan Big which features the MAX98090 codec. Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
-
Curtis Malainey authored
The current algorithm allows 3 types of transfers, 16bit, 32bit and burst. According to Realtek, 16bit transfers have a special restriction in that it is restricted to the memory region of 0x18020000 ~ 0x18021000. This region is the memory location of the I2C registers. The current algorithm does not uphold this restriction and therefore fails to complete writes. Since this has been broken for some time it likely no one is using it. Better to simply disable the 16 bit writes. This will allow users to properly load firmware over SPI without data corruption. Signed-off-by:
Curtis Malainey <cujomalainey@chromium.org> Reviewed-by:
Ben Zhang <benzh@chromium.org> Signed-off-by:
-
Baolin Wang authored
For Spreadtrum audio platform driver, it need allocate a larger DMA buffer dynamically to copy audio data between userspace and kernel space, but that will increase the risk of memory allocation failure especially the system is under heavy load situation. To make sure the audio can work in this scenario, we usually reserve one region of memory to be used as a shared pool of DMA buffers for the platform component. So add of_reserved_mem_device_init_by_idx() function to initialize the shared pool of DMA buffers to be used by the platform component. Signed-off-by:
Baolin Wang <baolin.wang@linaro.org> Signed-off-by:
-
- 03 May, 2019 26 commits
-
-
Mac Chiang authored
On kbl_rt5663_max98927, commit 38a5882e ("ASoC: Intel: kbl_rt5663_max98927: Map BTN_0 to KEY_PLAYPAUSE") This key pair mapping to play/pause when playing Youtube The Android 3.5mm Headset jack specification mentions that BTN_0 should be mapped to KEY_MEDIA, but this is less logical than KEY_PLAYPAUSE, which has much broader userspace support. For example, the Chrome OS userspace now supports KEY_PLAYPAUSE to toggle play/pause of videos and audio, but does not handle KEY_MEDIA. Furthermore, Android itself now supports KEY_PLAYPAUSE equivalently, as the new USB headset spec requires KEY_PLAYPAUSE for BTN_0. https://source.android.com/devices/accessories/headset/usb-headset-spec The same fix is required on Chrome kbl_da7219_max98357a. Signed-off-by:
Mac Chiang <mac.chiang@intel.com> Reviewed-by:
Benson Leung <bleung@chromium.org> Acked-by:
-
Bard liao authored
The machine driver is a generic machine driver for SOF with rt5682 codec. it currently supports BYT/CHT/ICL/CML. Depending on the SOC hdmi/speaker and DMIC support are added dynamically. Only add information related to SOF since the machine driver was only tested with SOF. Signed-off-by:
Sathya Prakash M R <sathya.prakash.m.r@intel.com> Signed-off-by:
Bard liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
-
Rander Wang authored
Semicolon is better than comma. Signed-off-by:
Rander Wang <rander.wang@linux.intel.com> Signed-off-by:
-
Rander Wang authored
Add dmic dai links using naming conventions used in previous machine drivers. Tested on whiskylake & icelake with SOF driver. Due to a missing topology file, the DMIC functionality could not be tested with the Skylake driver but was tested for non-regressions on a GeminiLake platform without DMICs. Signed-off-by:
-
Pan Xiuli authored
Add ipc dump function to CNL+ platforms. Signed-off-by:
Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by:
-
Pan Xiuli authored
Add IPC dump function for APL plaform Signed-off-by:
-
Pan Xiuli authored
Dump IPC status when IPC timed out. IPC status is platform specific and need bind to plaform. Signed-off-by:
-
Ranjani Sridharan authored
The prepare() ioctl for BE dai link gets called both when the stream is started and when it is resumed from suspend. SOF uses this ioctl to set the hw params again only if the stream has been suspended. When the stream is started, the hw_params ioctl gets called before prepare() and hw_params is set for the BE dai link. So the prepare call does not need to do anything further. When the stream resumes after system suspend, SOF requires that the hw_params be set again for the BE dai. In order to determine which streams should set the hw params during prepare(), an internal flag called "hw_params_upon_resume" is introduced in struct sof_intel_hda_stream. The flag is set for hda streams when the sof device suspends and is cleared after hw_params is set. Signed-off-by:
-
Keyon Jie authored
The stream and IPC share the same interrupt. The stream interrupt handler mistakenly uses the ipc interrupt and return IRQ_HANDLED, causing the ipc interrupt to be missed. Make sure the stream interrupt handler only deals with stream-related interrupts. Signed-off-by:
Keyon Jie <yang.jie@linux.intel.com> Signed-off-by:
-
Keyon Jie authored
Add stream_max into struct sof_intel_hda_dev to store the total hda stream number that the platform can support, and initialize it at stream_init. This can be used later e.g. for stream bitmask. Signed-off-by:
-
Keyon Jie authored
When using a shared IRQ between IPC interrupt and stream IOC interrupt, the interrupt handlers need to check the interrupt source before scheduling their respective IRQ threads. In the case of IPC handler, it should check if it is an IPC interrupt before waking up the IPC IRQ thread. The IPC IRQ thread, once scheduled, does not need to check the IRQ source again. So, remove the superfluous check in the thread. Remove the irq_status field from snd_sof_dev struct also as it is no longer needed. Signed-off-by:
-
Keyon Jie authored
Switch to a wrapper function which schedules the actual call of snd_pcm_period_elapsed after the current IPC is completed. Signed-off-by:
-
Keyon Jie authored
Switch to a wrapper function which schedules the actual call of snd_pcm_period_elapsed after the current IPC is completed. Signed-off-by:
-
Keyon Jie authored
The IPC implementation in SOF requires sending IPCs serially: we should not send a new IPC command to the firmware before we get an ACK (or time out) from firmware, and the IRQ processing is complete. snd_pcm_period_elapsed() can be called in interrupt context before IRQ_HANDLED is returned. When the PCM is done draining, a STOP IPC will then be sent, which breaks the expectation that IPCs are handled serially and leads to IPC timeouts. This patch adds a workqueue to defer the call to snd_pcm_elapsed() after the IRQ is handled. Signed-off-by:
-
Pierre-Louis Bossart authored
Nothing depends on definitions in hdaudio_ext.h, don't include it Signed-off-by:
-
Zhu Yingjiang authored
Setting the bus->idx as 0, for we only have one HDA bus atm. This need to be fixed when there are more than one HDA bus. Signed-off-by:
Zhu Yingjiang <yingjiang.zhu@linux.intel.com> Signed-off-by:
-
Zhu Yingjiang authored
By default, the I2S ports are configured in master mode during DSP powerup sequences, the FS and BCLK lines will be driven on startup, even when the topology file explicitly requires the SSP to be slave. This may be problematic for external components configured in master mode who don't expect the Intel SOC/PCH to drive. Fix by configuring the SSP as slave before the SSP outputs are enabled to avoid this transient behavior. When the topology file configures the SSP as clock master, the initial slave configuration will be overridden. Signed-off-by:
-
Zhu Yingjiang authored
add SSP info of APL and CNL, to the sof_intel_dsp_desc structure. The max SSP count the platform support and the SSP base address. Signed-off-by:
-
Zhu Yingjiang authored
The DSP SSP device memory can be conditionally accessed by the host(depending on access policy). Add the SSP base memory offset of APL and CNL. Signed-off-by:
-
Keyon Jie authored
Add .pcm_pointer ops for cannonlake to read DPIB/posbuf and get pointer for ALSA, to align with apollolake. Signed-off-by:
-
Pierre-Louis Bossart authored
Fail early if topology is more recent than kernel and Kconfig is selected. Signed-off-by:
-
Pierre-Louis Bossart authored
Fail early if firmware is more recent than kernel and Kconfig is selected. Signed-off-by:
-
Pierre-Louis Bossart authored
When the kernel is more recent than firmware files, it will always behave in backwards-compatible ways. Add optional behavior to check if the kernel is older than the firmware files, so that the kernel fails early instead of attempting to use new functionality it does not support. Signed-off-by:
-
Ross Zwisler authored
Currently in sst_dsp_new() if we get an error return from sst_dma_new() we just print an error message and then still complete the function successfully. This means that we are trying to run without sst->dma properly set up, which will result in NULL pointer dereference when sst->dma is later used. This was happening for me in sst_dsp_dma_get_channel(): struct sst_dma *dma = dsp->dma; ... dma->ch = dma_request_channel(mask, dma_chan_filter, dsp); This resulted in: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: sst_dsp_dma_get_channel+0x4f/0x125 [snd_soc_sst_firmware] Fix this by adding proper error handling for the case where we fail to set up DMA. This change only affects Haswell and Broadwell systems. Baytrail systems explicilty opt-out of DMA via sst->pdata->resindex_dma_base being set to -1. Signed-off-by:Ross Zwisler <zwisler@google.com> Cc: stable@vger.kernel.org Acked-by:
-
Jerome Brunet authored
startup() should have run before hw_params() is called, so the current_substream pointer should already be properly set. There is no reason to call hdmi_codec_new_stream() again in the hw_params() callback Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
-
Colin Ian King authored
Currently there are two null checks of pointer dai in function sof_connect_dai_widget and yet there is no null check of dai at the end of the function when checking !dai->name. The latter would be a null pointer deference if dai is null (as picked up by static analysis), however the function is only ever called when dai is successfully allocated, so the null checks are redundant. Clean up the code by removing the null checks. Addresses-Coverity: ("Dereference after null check") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 02 May, 2019 2 commits
-
-
Adam Thomson authored
For some platforms where DA7219 is the DAI clock master, BCLK/WCLK will be set and enabled prior to the codec's hw_params() function being called. It is possible the platform requires a different BCLK configuration than would be chosen by hw_params(), for example S16_LE format needed with a 64-bit frame to satisfy certain devices using the clocks. To handle those kinds of scenarios, the use of clk_round_rate() is now employed as part of hw_params(). If BCLK is already enabled then this function will just return the currently set rate, if it is valid for the desired frame size, so the subsequent call to clk_set_rate() will succeed and nothing changes with regards to clocking. In addition the specific BCLK & WCLK recalc_rate() implementations needed updating to always give back a real value, as those functions are called as part of the clk init code and a real value is needed for the clk_round_rate() call to work as expected. Signed-off-by:
Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by:
-
Hui Wang authored
The LattePanda board has a sound card chtrt5645, when there is nothing plugged in the headphone jack, the system thinks the headphone is plugged in, while we plug a headphone in the jack, the system thinks the headphone is unplugged. If adding quirk=0x21 in the module parameter, the headphone jack can work well. So let us fix it via platform_data. https://bugs.launchpad.net/bugs/182459Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
