- 05 May, 2014 11 commits
-
-
Sebastian Hesselbarth authored
There is only one valid pinctrl setting for I2C0 on Kirkwood. Now that we have the setting in the common SoC pinctrl, move it to the I2C0 controller node directly and remove it from the individual boards. While at it, also fix up status = "okay" to "ok" on one board's I2C0 node. Signed-off-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1398862602-29595-13-git-send-email-sebastian.hesselbarth@gmail.comSigned-off-by:
Jason Cooper <jason@lakedaemon.net>
-
Sebastian Hesselbarth authored
There is only one valid pinctrl setting for NAND on Kirkwood. Now that we have the setting in the common SoC pinctrl, move it to the NAND controller node directly and remove it from the individual boards. While at it, also fix up status = "okay" to "ok" on one board's NAND node. Signed-off-by:
-
Sebastian Hesselbarth authored
Most Kirkwood boards use the default SPI0 pinctrl setting anyway. Add a default pinctrl setting to the toplevel SoC SPI0 node and put a note in front of the corresponding pinctrl node to overwrite the setting on board level. Currently, only T5325 is using a different setting and already overwrites the corresponding pinctrl node. Signed-off-by:
-
Sebastian Hesselbarth authored
Most boards use the default UART0/1 pinctrl setting without RTS/CTS. Add the pinctrl setting to the toplevel SoC UART nodes and put a note in front of the corresponding pinctrl node to overwrite the setting on board level. Currently, both boards using a different UART pinctrl setting (Openblocks A6, A7) already overwrite the pinctrl node. While at it, also fix up some status = "ok" to "okay" and again whitespace issues on mplcec4 uart nodes. Signed-off-by:
-
Sebastian Hesselbarth authored
On Kirkwood, there is only one valid pinctrl setting for GBE1. With a common SoC pinctrl node, we can now set it in the node instead of in each board file. Signed-off-by:
-
Sebastian Hesselbarth authored
All SoCs have the same pinctrl setting for NAND, UART0/1, SPI, TWSI0, and GBE1. Move it to the common pinctrl node that we now have. Signed-off-by:
-
Sebastian Hesselbarth authored
All Kirkwood SoCs have their pinctrl registers at the same address. Instead of replaying the same reg property on each SoC, have the reg property set in the common SoC file already. This also allows us to move common pinctrl settings to this node later on. Signed-off-by:
-
Sebastian Hesselbarth authored
To prepare pin-controller consolidation, first rename all pinctrl nodes to a more appropriate name regarding ePAPR recommended names. Signed-off-by:
-
Sebastian Hesselbarth authored
UART devices found on Kirkwood SoCs derive their baudrate from TCLK. With proper clocks property in the SoCs serial node, boards do not need to overwrite it anymore. Remove the remaining clock-frequency property from all Kirkwood boards. Signed-off-by:
-
Sebastian Hesselbarth authored
ePAPR allows to reference the device used for console output by stdout-path property. With node labels for Kirkwood UART0, now reference it on all Kirkwood boards that already have ttyS0 in their bootargs property. While at it, fix some whitespace issues on mplcec4's chosen node (there are more, but we only fix the chosen node now) Signed-off-by:
-
Sebastian Hesselbarth authored
This adds missing node labels to Kirkwood common and SoC specific nodes to allow to reference them more easily. Signed-off-by:
-
- 28 Apr, 2014 1 commit
-
-
Ezequiel Garcia authored
This commit enables the thermal sensor found in Armada 380/385 SoCs. Signed-off-by:
Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1398371004-15807-11-git-send-email-ezequiel.garcia@free-electrons.comSigned-off-by:
-
- 26 Apr, 2014 5 commits
-
-
Ezequiel Garcia authored
This commit enables the thermal sensor found in Armada 375 SoCs. Signed-off-by:
-
Thomas Petazzoni authored
The Netgear RN2120 was not using the same strategy as the other Armada 370/375/38x/XP boards: it was using a 'clocks' property and not the 'clock-frequency' property in its UART controller Device Tree node. However, now that this clock reference is present at the SoC-level, there is no point in duplicating it at the board-level. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1397806908-7550-6-git-send-email-thomas.petazzoni@free-electrons.comSigned-off-by:
-
Thomas Petazzoni authored
Now that the Armada 370/375/38x/XP SoC-level Device Tree files have the proper "clocks" property in their UART controllers node, it is no longer useful to have the clock-frequency property defined in the board-level Device Tree files. Therefore, this commit gets rid of all the useless 'clock-frequency' properties. Signed-off-by:
-
Thomas Petazzoni authored
Back when the Armada 370 and Armada XP initial support was introduced, the only way to pass the clock frequency to the of_serial driver was through a clock-frequency Device Tree property. Thanks to 0bbeb3c3 ('of serial port driver - add clk_get_rate() support'), it is possible to use the standard 'clocks' DT property to reference the clock used for a particular UART controller. This clock is then used by the of_serial driver to retrieve the clock rate. This commit modifies the SoC-level Device Tree files of Armada 370, Armada XP, Armada 375 and Armada 38x to use this possibility. Since there is no gatable clock for the UART controllers, we simply reference the TCLK, which is the main SoC clock for the peripherals. Signed-off-by:
-
Thomas Petazzoni authored
The Marvell Armada 38x processors contain two AHCI compatible interfaces. This commit adds the Device Tree description of those interfaces at the SoC level, and also enables them on the Armada 385 DB platform, which allows access to both interfaces through SATA ports. Signed-off-by:
-
- 25 Apr, 2014 1 commit
-
-
Thomas Petazzoni authored
In commit "mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller", the sdhci-pxav3 driver has been extended to also be usable on Armada 38x platforms. Therefore, this commit adds the necessary Device Tree informations to declare this SDHCI interface in the Armada 38x SoC, and also in the Armada 385 Development Board. Signed-off-by:
-
- 24 Apr, 2014 11 commits
-
-
Thomas Petazzoni authored
This commit improves the Armada 38x Device Tree to add the CPU reset and PMSU Device Tree nodes as well as the declaration of the enabling method for the CPUs. These are needed to get SMP working on Armada 38x platforms. Signed-off-by:
-
Gregory CLEMENT authored
Improve the Armada 375 Device Tree to add the CPU reset Device Tree node and declare the enabling method for CPUs, both of which are necessary to get SMP working. Signed-off-by:
-
Thomas Petazzoni authored
This commit updates the Armada XP Device Trees (for the three variants of Armada XP) to declare the "enable-method" property for the CPUs, which helps operating systems find the appropriate logic to manage the CPUs, especially to boot secondary CPUs. Signed-off-by:
-
Gregory CLEMENT authored
Following the introduction of the new PMSU Device Tree binding, as well as the separate CPU reset binding, this commit switches the Armada 370 and Armada XP Device Trees to use them. The PMSU node is moved from the Armada XP specific armada-xp.dtsi to the common Armada 370/XP armada-370-xp.dtsi because the PMSU is in fact available at the same location on both SOCs. The CPU reset node is then added on both Armada 370 and Armada XP, with a different compatible string. On Armada 370, the CPU reset driver is not really needed as Armada 370 is single core and the only use of the CPU reset driver is to boot secondary processors, but it still makes sense to have this CPU reset register described in the Device Tree. Signed-off-by:
-
Thomas Petazzoni authored
This commit adds the necessary Device Tree information to enable the coherency fabric on Armada 38x. Signed-off-by:
-
Thomas Petazzoni authored
This commit adds the necessary Device Tree information to enable the coherency fabric on Armada 375. Signed-off-by:
-
Ezequiel Garcia authored
Add the DT nodes to enable the watchdog support available on Armada 380/385 SoC. Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Ezequiel Garcia authored
Add the DT nodes to enable the watchdog support available on Armada 375 SoC. Reviewed-by:
-
Adam Baker authored
Rename the include file kirkwood-nsa310-common.dtsi as it is now also used for NSA320. There is also an NSA325 but that appears not to be as similar so is unlikely to want to share an include file. Signed-off-by:
Adam Baker <linux@baker-net.org.uk> Link: https://lkml.kernel.org/r/53447978.2020206@baker-net.org.ukAcked-by:
-
Adam Baker authored
Add a new DTS file to support the Zyxel NSA320 dual bay NAS Drive. This DTS just describes the features that work with the current kernel drivers. New drivers still need writing to support the temperature sensor, the power on behaviour control and the buzzer. Signed-off-by:
-
Adam Baker authored
Move definitions that are common to both nsa-310.dts and nsa310a.dts and that will also be used in nsa320 into kirkwood-nsa310-common.dtsi. Also rename the USB Regulator to remove the word off from its name as the state of a regulator shouldn't be part of its name. Signed-off-by:
-
- 13 Apr, 2014 11 commits
-
-
Linus Torvalds authored
-
Geert Uytterhoeven authored
Some versions of gcc even warn about it: mm/shmem.c: In function ‘shmem_file_aio_read’: mm/shmem.c:1414: warning: ‘error’ may be used uninitialized in this function If the loop is aborted during the first iteration by one of the two first break statements, error will be uninitialized. Introduced by commit 6e58e79d ("introduce copy_page_to_iter, kill loop over iovec in generic_file_aio_read()"). Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
On 32 bit, size_t is "unsigned int", not "unsigned long", causing the following warning when comparing with PAGE_SIZE, which is always "unsigned long": fs/cifs/file.c: In function ‘cifs_readdata_to_iov’: fs/cifs/file.c:2757: warning: comparison of distinct pointer types lacks a cast Introduced by commit 7f25bba8 ("cifs_iovec_read: keep iov_iter between the calls of cifs_readdata_to_iov()"), which changed the signedness of "remaining" and the code from min_t() to min(). Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linuxLinus Torvalds authored
Pull slab changes from Pekka Enberg: "The biggest change is byte-sized freelist indices which reduces slab freelist memory usage: https://lkml.org/lkml/2013/12/2/64" * 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: mm: slab/slub: use page->list consistently instead of page->lru mm/slab.c: cleanup outdated comments and unify variables naming slab: fix wrongly used macro slub: fix high order page allocation problem with __GFP_NOFAIL slab: Make allocations with GFP_ZERO slightly more efficient slab: make more slab management structure off the slab slab: introduce byte sized index for the freelist of a slab slab: restrict the number of objects in a slab slab: introduce helper functions to get/set free object slab: factor out calculate nr objects in cache_estimate -
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
Pull misc kbuild changes from Michal Marek: "Here is the non-critical part of kbuild: - One bogus coccinelle check removed, one check fixed not to suggest the obsolete PTR_RET macro - scripts/tags.sh does not index the generated *.mod.c files - new objdiff tool to list differences between two versions of an object file - A fix for scripts/bootgraph.pl" * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: scripts/coccinelle: Use PTR_ERR_OR_ZERO scripts/bootgraph.pl: Add graphic header scripts: objdiff: detect object code changes between two commits Coccicheck: Remove memcpy to struct assignment test scripts/tags.sh: Ignore *.mod.c -
Mikulas Patocka authored
This patch fixes I/O errors with the sym53c8xx_2 driver when the disk returns QUEUE FULL status. When the controller encounters an error (including QUEUE FULL or BUSY status), it aborts all not yet submitted requests in the function sym_dequeue_from_squeue. This function aborts them with DID_SOFT_ERROR. If the disk has full tag queue, the request that caused the overflow is aborted with QUEUE FULL status (and the scsi midlayer properly retries it until it is accepted by the disk), but the sym53c8xx_2 driver aborts the following requests with DID_SOFT_ERROR --- for them, the midlayer does just a few retries and then signals the error up to sd. The result is that disk returning QUEUE FULL causes request failures. The error was reproduced on 53c895 with COMPAQ BD03685A24 disk (rebranded ST336607LC) with command queue 48 or 64 tags. The disk has 64 tags, but under some access patterns it return QUEUE FULL when there are less than 64 pending tags. The SCSI specification allows returning QUEUE FULL anytime and it is up to the host to retry. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Paul Mackerras authored
Commit 8f619b54 ("powerpc/ppc64: Do not turn AIL (reloc-on interrupts) too early") added code to set the AIL bit in the LPCR without checking whether the kernel is running in hypervisor mode. The result is that when the kernel is running as a guest (i.e., under PowerKVM or PowerVM), the processor takes a privileged instruction interrupt at that point, causing a panic. The visible result is that the kernel hangs after printing "returning from prom_init". This fixes it by checking for hypervisor mode being available before setting LPCR. If we are not in hypervisor mode, we enable relocation-on interrupts later in pSeries_setup_arch using the H_SET_MODE hcall. Signed-off-by:
Paul Mackerras <paulus@samba.org> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Davidlohr Bueso authored
Commits 11d4616b ("futex: revert back to the explicit waiter counting code") and 69cd9eba ("futex: avoid race between requeue and wake") changed some of the finer details of how we think about futexes. One was a late fix and the other a consequence of overlooking the whole requeuing logic. The first change caused our documentation to be incorrect, and the second made us aware that we need to explicitly add more details to it. Signed-off-by:
Davidlohr Bueso <davidlohr@hp.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull yet more networking updates from David Miller: 1) Various fixes to the new Redpine Signals wireless driver, from Fariya Fatima. 2) L2TP PPP connect code takes PMTU from the wrong socket, fix from Dmitry Petukhov. 3) UFO and TSO packets differ in whether they include the protocol header in gso_size, account for that in skb_gso_transport_seglen(). From Florian Westphal. 4) If VLAN untagging fails, we double free the SKB in the bridging output path. From Toshiaki Makita. 5) Several call sites of sk->sk_data_ready() were referencing an SKB just added to the socket receive queue in order to calculate the second argument via skb->len. This is dangerous because the moment the skb is added to the receive queue it can be consumed in another context and freed up. It turns out also that none of the sk->sk_data_ready() implementations even care about this second argument. So just kill it off and thus fix all these use-after-free bugs as a side effect. 6) Fix inverted test in tcp_v6_send_response(), from Lorenzo Colitti. 7) pktgen needs to do locking properly for LLTX devices, from Daniel Borkmann. 8) xen-netfront driver initializes TX array entries in RX loop :-) From Vincenzo Maffione. 9) After refactoring, some tunnel drivers allow a tunnel to be configured on top itself. Fix from Nicolas Dichtel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits) vti: don't allow to add the same tunnel twice gre: don't allow to add the same tunnel twice drivers: net: xen-netfront: fix array initialization bug pktgen: be friendly to LLTX devices r8152: check RTL8152_UNPLUG net: sun4i-emac: add promiscuous support net/apne: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO net: ipv6: Fix oif in TCP SYN+ACK route lookup. drivers: net: cpsw: enable interrupts after napi enable and clearing previous interrupts drivers: net: cpsw: discard all packets received when interface is down net: Fix use after free by removing length arg from sk_data_ready callbacks. Drivers: net: hyperv: Address UDP checksum issues Drivers: net: hyperv: Negotiate suitable ndis version for offload support Drivers: net: hyperv: Allocate memory for all possible per-pecket information bridge: Fix double free and memory leak around br_allowed_ingress bonding: Remove debug_fs files when module init fails i40evf: program RSS LUT correctly i40evf: remove open-coded skb_cow_head ixgb: remove open-coded skb_cow_head igbvf: remove open-coded skb_cow_head ... -
Linus Torvalds authored
Merge tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux Pull blackfin updates from Steven Miao: "Code cleanup, some previously ignored patches, and bug fixes" * tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux: blackfin: cleanup board files bf609: clock: drop unused clock bit set/clear functions Blackfin: bf537: rename "CONFIG_ADT75" Blackfin: bf537: rename "CONFIG_AD7314" Blackfin: bf537: rename ad2s120x ->ad2s1200 blackfin: bf537: fix typo "CONFIG_SND_SOC_ADV80X_MODULE" blackfin: dma: current count mmr is read only bfin_crc: Move architecture independant crc header file out of the blackfin folder. bf54x: drop unuesd HOST status,control,timeout registers bit define macros blackfin: portmux: cleanup head file Blackfin: remove "config IP_CHECKSUM_L1" blackfin: Remove GENERIC_GPIO config option again blackfin:Use generic /proc/interrupts implementation blackfin: bf60x: fix typo "CONFIG_PM_BFIN_WAKE_PA15_POL"
-
Linus Torvalds authored
Merge tag 'remoteproc-3.15-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc Pull remoteproc cleanups from Ohad Ben-Cohen: "Several remoteproc cleanup patches coming from Jingoo Han, Julia Lawall and Uwe Kleine-König" * tag 'remoteproc-3.15-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc: remoteproc/ste_modem: staticize local symbols remoteproc/davinci: simplify use of devm_ioremap_resource remoteproc/davinci: drop needless devm_clk_put
-
