- 07 Feb, 2008 40 commits
-
-
David Howells authored
Stop the CIFS filesystem from using iget() and read_inode(). Replace cifs_read_inode() with cifs_iget(), and call that instead of iget(). cifs_iget() then uses iget_locked() directly and returns a proper error code instead of an inode in the event of an error. cifs_read_super() now returns any error incurred when getting the root inode instead of ENOMEM. cifs_iget() needs examining. The comment "can not call macro FreeXid here since in a void func" is no longer true. Signed-off-by:
David Howells <dhowells@redhat.com> Cc: Steven French <sfrench@us.ibm.com> Acked-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
Stop the BFS filesystem from using iget() and read_inode(). Replace bfs_read_inode() with bfs_iget(), and call that instead of iget(). bfs_iget() then uses iget_locked() directly and returns a proper error code instead of an inode in the event of an error. bfs_fill_super() returns any error incurred when getting the root inode instead of EINVAL. [kamalesh@linux.vnet.ibm.com: build fix] Signed-off-by:
Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by:
-
David Howells authored
Stop the BEFS filesystem from using iget() and read_inode(). Replace befs_read_inode() with befs_iget(), and call that instead of iget(). befs_iget() then uses iget_locked() directly and returns a proper error code instead of an inode in the event of an error. befs_fill_super() returns any error incurred when getting the root inode instead of EINVAL. Signed-off-by:
Will Dyson <will_dyson@pobox.com> Acked-by:
-
David Howells authored
Stop the autofs filesystem from using iget() and read_inode(). Replace autofs_read_inode() with autofs_iget(), and call that instead of iget(). autofs_iget() then uses iget_locked() directly and returns a proper error code instead of an inode in the event of an error. Signed-off-by:
-
David Howells authored
Stop the AFFS filesystem from using iget() and read_inode(). Replace affs_read_inode() with affs_iget(), and call that instead of iget(). affs_iget() then uses iget_locked() directly and returns a proper error code instead of an inode in the event of an error. affs_fill_super() returns any error incurred when getting the root inode instead of EINVAL. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
David Howells authored
Use iget_failed() in GFS2 to kill a failed inode. Signed-off-by:
-
David Howells authored
Use iget_failed() in AFS to kill a failed inode. Signed-off-by:
-
David Howells authored
Introduce a function to register failure in an inode construction path. This includes marking the inode under construction as bad, unlocking it and releasing it. Signed-off-by:
-
David Howells authored
Convert instances of ERR_PTR(PTR_ERR(p)) to ERR_CAST(p) using: perl -spi -e 's/ERR_PTR[(]PTR_ERR[(](.*)[)][)]/ERR_CAST(\1)/' `grep -rl 'ERR_PTR[(]*PTR_ERR' fs crypto net security` Signed-off-by:
-
David Howells authored
Add an ERR_CAST() function to complement ERR_PTR and co. for the purposes of casting an error entyped as one pointer type to an error of another pointer type whilst making it explicit as to what is going on. This provides a replacement for the ERR_PTR(PTR_ERR(p)) construct. Signed-off-by:
-
Matthias Kaehlcke authored
MBCS: Convert the semaphore dmareadlock to the mutex API Signed-off-by:
Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by:
-
Matthias Kaehlcke authored
MBCS: Convert the semaphore dmawritelock to the mutex API Signed-off-by:
-
Matthias Kaehlcke authored
MBCS: Convert the semaphore algolock to the mutex API Signed-off-by:
-
Ken'ichi Ohmichi authored
This patch fixes the configuration dependencies in the vmcoreinfo data. i386's "node_data" is defined in arch/x86/mm/discontig_32.c, and x86_64's one is defined in arch/x86/mm/numa_64.c. They depend on CONFIG_NUMA: arch/x86/mm/Makefile_32:7 obj-$(CONFIG_NUMA) += discontig_32.o arch/x86/mm/Makefile_64:7 obj-$(CONFIG_NUMA) += numa_64.o ia64's "pgdat_list" is defined in arch/ia64/mm/discontig.c, and it depends on CONFIG_DISCONTIGMEM and CONFIG_SPARSEMEM: arch/ia64/mm/Makefile:9-10 obj-$(CONFIG_DISCONTIGMEM) += discontig.o obj-$(CONFIG_SPARSEMEM) += discontig.o ia64's "node_memblk" is defined in arch/ia64/mm/numa.c, and it depends on CONFIG_NUMA: arch/ia64/mm/Makefile:8 obj-$(CONFIG_NUMA) += numa.o Signed-off-by:Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp> Acked-by:
Simon Horman <horms@verge.net.au> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
Ken'ichi Ohmichi authored
For readability, all the calls to vmcoreinfo_append_str() are changed to macros having a prefix "VMCOREINFO_". This discussion is the following: http://www.ussg.iu.edu/hypermail/linux/kernel/0709.3/0584.htmlSigned-off-by:
-
Ken'ichi Ohmichi authored
It is better that the existing offsetof() is used for VMCOREINFO_OFFSET(). This discussion is the following: http://www.ussg.iu.edu/hypermail/linux/kernel/0709.3/0584.htmlSigned-off-by:
-
Ken'ichi Ohmichi authored
This patchset is for the vmcoreinfo data. The vmcoreinfo data has the minimum debugging information only for dump filtering. makedumpfile (dump filtering command) gets it to distinguish unnecessary pages, and makedumpfile creates a small dumpfile. This patch: VMCOREINFO_SIZE() should be renamed VMCOREINFO_STRUCT_SIZE() since it's always returning the size of the struct with a given name. This change would allow VMCOREINFO_TYPEDEF_SIZE() to simply become VMCOREINFO_SIZE() since it need not be used exclusively for typedefs. This discussion is the following: http://www.ussg.iu.edu/hypermail/linux/kernel/0709.3/0582.htmlSigned-off-by:
David Rientjes <rientjes@google.com> Acked-by:
-
Bernhard Walle authored
Use the BOOTMEM_EXCLUSIVE, introduced in the previous patch, to avoid conflicts while reserving the memory for the kdump capture kernel (crashkernel=). Signed-off-by:
Bernhard Walle <bwalle@suse.de> Cc: <linux-arch@vger.kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Acked-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Bernhard Walle authored
This patchset adds a flags variable to reserve_bootmem() and uses the BOOTMEM_EXCLUSIVE flag in crashkernel reservation code to detect collisions between crashkernel area and already used memory. This patch: Change the reserve_bootmem() function to accept a new flag BOOTMEM_EXCLUSIVE. If that flag is set, the function returns with -EBUSY if the memory already has been reserved in the past. This is to avoid conflicts. Because that code runs before SMP initialisation, there's no race condition inside reserve_bootmem_core(). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix powerpc build] Signed-off-by:
-
Randy Dunlap authored
- move minixfs and ROMfs to the Miscellaneous filesystems menu - move DNOTIFY config symbol so that it is adjacent to INOTIFY instead of being split by the QUOTA config options - add some 'endif' annotations - remove some whitespace (extra blank lines) Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Maciej W. Rozycki authored
This is a set of changes to implement proper resource management in the driver, including iomem space reservation and operating on physical addresses ioremap()ped appropriately using accessory functions rather than unportable direct assignments. Some adjustments to code are made to reflect the architecture of the interface, which is a centrally controlled multiport (or, as referred to from DEC documentation, a serial line multiplexer, going up to 8 lines originally) rather than a bundle of separate ports. Types are changed, where applicable, to specify the width of hardware registers explicitly. The interrupt handler is now managed in the ->startup() and ->shutdown() calls for consistency with other drivers and also in preparation to handle the handover from the initial firmware-based console gracefully. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Maciej W. Rozycki authored
Replace all casts from "struct uart_port *" to "struct dz_port *" with a construct based on container_of(). This makes the conversion work irrespective of where the former struct is located within the latter. By popular request I have implemented it as an inline function rather than a macro this time. Signed-off-by:
-
Maciej W. Rozycki authored
A set of changes to the way termios settings are propagated to the serial port hardware. The DZ11 only supports a selection of fixed baud settings, so some requests may not be fulfilled. Keep the old setting in such a case and failing that resort to 9600bps. Also add a missing update of the transmit timeout. And remove the explicit encoding of the line selected from writes to the Line Parameters Register as it has been preencoded by the ->set_termios() call already. Finally, remove a duplicate macro for the Receiver Enable bit. Signed-off-by:
-
Maciej W. Rozycki authored
Now that I have got the necessary piece of hardware (thanks, Thiemo!), I may well offer myself as the maintainer for the dz serial driver. I hope nobody objects. Signed-off-by:
-
Maciej W. Rozycki authored
Handle the read and ignore status masks correctly. Handle the BREAK condition as expected: a framing error with a null character is a BREAK, any other framing error is a framing error indeed. Signed-off-by:
-
Maciej W. Rozycki authored
The ->start_tx(), ->stop_tx() and ->stop_rx() backends are called with the port's lock already taken. Remove locking from within them and wrap around calls as necessary. Signed-off-by:
-
Maciej W. Rozycki authored
Rename the serial console structure so that `modpost' does not complain about a reference to an "init" section -- "_console" is magic. Signed-off-by:
-
Maciej W. Rozycki authored
Reformat the Kconfig entries and update descriptions for accuracy. Select the driver by default for configurations of interest. For the curious: 32BIT means only 32-bit DECstations support the device, not that the driver is not 64-bit clean; I have not checked that either though. Signed-off-by:
-
Maciej W. Rozycki authored
Sort the header inclusions, add a few that are needed but pulled indirectly only and remove ones that are not really used. Signed-off-by:
-
Maciej W. Rozycki authored
Well, panic() is a little bit undue if request_irq() fails; there is probably no need to justify it any further. Handle the case gracefully, by unregistering the driver. Signed-off-by:
-
Maciej W. Rozycki authored
Polled transmission is tricky enough with the DZ11 design. While "loop" is set to a high value, conceptually you are not allowed to transmit without checking whether the device offers the right transmission line (yes, it is the device that selects the line -- the driver has no control over it other than disabling the transmitter offered if it is the wrong one), so the loop has to be run at least once. Well, the '1977 or PDP11 view of how serial lines should be handled... Except that the serial interface used to be quite an impressive board back then rather than chip. Signed-off-by:
-
Maciej W. Rozycki authored
Remove unused module function prototypes that would not even build if enabled. Signed-off-by:
-
Jason Uhlenkott authored
By popular request, add a comment documenting the implicit type promotion here. Signed-off-by:
Jason Uhlenkott <juhlenko@akamai.com> Signed-off-by:
Doug Thompson <dougthompson@xmission.com> Signed-off-by:
-
Hitoshi Mitake authored
There is a missing sequence of initialization code during startup. Signed-off-by:
Hitoshi Mitake <h.mitake@gmail.com> Signed-off-by:
Doug Thompson <dougthompson@xmisson.com> Signed-off-by:
-
Doug Thompson authored
Made a previous global variable, static in scope Signed-off-by:
-
Jason Uhlenkott authored
Modified to run on x86_64 as well as x86 i3000_edac builds (and runs) fine on x86_64. Signed-off-by:
-
Bryan Boatright authored
Using the EDAC code in kernel.org kernel version 2.6.23.8 I am seeing the following problem: In the kernel there is a pci device attribute located in sysfs that is checked by the EDAC PCI scanning code. If that attribute is set, PCI parity/error scannining is skipped for that device. The attribute is: broken_parity_status as is located in /sys/devices/pci<XXX>/0000:XX:YY.Z directorys for PCI devices. I don't think this check was actually implemented. I have a misbehaved card that reports a parity error every 1000 ms: Nov 25 07:28:43 beta kernel: EDAC PCI: Master Data Parity Error on 0000:05:01.0 Nov 25 07:28:44 beta kernel: EDAC PCI: Master Data Parity Error on 0000:05:01.0 Nov 25 07:28:45 beta kernel: EDAC PCI: Master Data Parity Error on 0000:05:01.0 Setting that card's broken_parity_status bit did not mask the error: echo "1" > /sys/bus/pci/devices/0000:05:01.0/broken_parity_status I looked through the EDAC code and did not readily see any reference to broken_parity_status at all (which makes sense based on the behavior I am seeing). I applied the following patch as a proof-of-concept and now EDAC's PCI parity error reporting behaves as documented: bryan Good regression find, bryan. It used to work. sigh. I added more logic to your patch, for more coverage of the error. Doug T Signed-off-by:Bryan Boatright <b1@omega71.com> Signed-off-by:
-
Dave Jiang authored
Marvell mv64x60 SoC support for EDAC. Used on PPC and MIPS platforms. Development and testing done on PPC Motorola prpmc2800 ATCA board. [akpm@linux-foundation.org: make mv64x60_ctl_name static] Signed-off-by:
Dave Jiang <djiang@mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk Signed-off-by:
-
Dave Jiang authored
EDAC chip driver support for Freescale MPC85xx platforms. PPC based. Signed-off-by:
-
Jason Uhlenkott authored
Replace function-like macros with functions. Signed-off-by:
-
