Sangtae noticed the ssthresh got missed.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix sizeof(ETH_ALEN) Introduced by my rtnl_link patches.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add macvlan driver, which allows to create virtual ethernet devices
based on MAC address.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The set_multicast_list function may be called without holding the rtnl
mutex, resulting in races when changing the underlying device's promiscous
and allmulti state. Use the change_rx_mode hook, which is always invoked
under the rtnl.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The method drivers currently use to synchronize multicast lists is not
very pretty:

- walk the multicast list
- search each entry on a copy of the previous list
- if new add to lower device
- walk the copy of the previous list
- search each entry on the current list
- if removed delete from lower device
- copy entire list

This patch adds a new field to struct dev_addr_list to store the
synchronization state and adds two helper functions for synchronization
and cleanup.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the set_multicast_list (and set_rx_mode) callbacks are
responsible for configuring the device according to the IFF_PROMISC,
IFF_MULTICAST and IFF_ALLMULTI flags and the mc_list (and uc_list in
case of set_rx_mode).

These callbacks can be invoked from BH context without the rtnl_mutex
by dev_mc_add/dev_mc_delete, which makes reading the device flags and
promiscous/allmulti count racy. For real hardware drivers that just
commit all changes to the hardware this is not a real problem since
the stack guarantees to call them for every change, so at least the
final call will not race and commit the correct configuration to the
hardware.

For software devices that want to synchronize promiscous and multicast
state to an underlying device however this can cause corruption of the
underlying device's flags or promisc/allmulti counts.

When the software device is concurrently put in promiscous or allmulti
mode while set_multicast_list is invoked from bottem half context, the
device might synchronize the change to the underlying device without
holding the rtnl_mutex, which races with concurrent changes to the
underlying device.

Add a dev->change_rx_flags hook that is invoked when any of the flags
that affect rx filtering change (under the rtnl_mutex), which allows
drivers to perform synchronization immediately and only synchronize
the address lists in set_multicast_list/set_rx_mode.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Subject: [patch] net/input: fix net/rfkill/rfkill-input.c bug on 64-bit systems

this recent commit:

 commit cf4328cd
 Author: Ivo van Doorn <IvDoorn@gmail.com>
 Date:   Mon May 7 00:34:20 2007 -0700

     [NET]: rfkill: add support for input key to control wireless radio

added this 64-bit bug:

        ....
	unsigned int flags;
 
 	spin_lock_irqsave(&task->lock, flags);
        ....

irq 'flags' must be unsigned long, not unsigned int. The -rt tree has 
strict checks about this on 64-bit so this triggered a build failure. 
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 9faf65fb.

It bit people like Michal Piotrowski:

  "My system is too secure, I can not login :)"

because it changed how CONFIG_NETLABEL worked, and broke older SElinux
policies.

As a result, quoth James Morris:

  "Can you please revert this patch?

   We thought it only affected people running MLS, but it will affect others.

   Sorry for the hassle."

Cc: James Morris <jmorris@namei.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: Paul Moore <paul.moore@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.linux-nfs.org/pub/linux/nfs-2.6: (122 commits)
  sunrpc: drop BKL around wrap and unwrap
  NFSv4: Make sure unlock is really an unlock when cancelling a lock
  NLM: fix source address of callback to client
  SUNRPC client: add interface for binding to a local address
  SUNRPC server: record the destination address of a request
  SUNRPC: cleanup transport creation argument passing
  NFSv4: Make the NFS state model work with the nosharedcache mount option
  NFS: Error when mounting the same filesystem with different options
  NFS: Add the mount option "nosharecache"
  NFS: Add support for mounting NFSv4 file systems with string options
  NFS: Add final pieces to support in-kernel mount option parsing
  NFS: Introduce generic mount client API
  NFS: Add enums and match tables for mount option parsing
  NFS: Improve debugging output in NFS in-kernel mount client
  NFS: Clean up in-kernel NFS mount
  NFS: Remake nfsroot_mount as a permanent part of NFS client
  SUNRPC: Add a convenient default for the hostname when calling rpc_create()
  SUNRPC: Rename rpcb_getport to be consistent with new rpcb_getport_sync name
  SUNRPC: Rename rpcb_getport_external routine
  SUNRPC: Allow rpcbind requests to be interrupted by a signal.
  ...

When nfsd was transitioned to use splice instead of sendfile() for data
transfers, a line setting the page index was lost. Restore it, so that
nfsd is functional when that path is used.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Roman Zippel noticed another inconsistency of the wmult table.

wmult[16] has a missing digit.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Fix typos in powernow-k8 printk's.
  [CPUFREQ] Restore previously used governor on a hot-replugged CPU
  [CPUFREQ] bugfix cpufreq in combination with performance governor
  [CPUFREQ] powernow-k8 compile fix.
  [CPUFREQ] the overdue removal of X86_SPEEDSTEP_CENTRINO_ACPI
  [CPUFREQ] Longhaul - Option to disable ACPI C3 support

Fixed up arch/i386/kernel/cpu/cpufreq/powernow-k8.c due to revert that
got fixed differently in the cpufreq branch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'ioat-md-accel-for-linus' of git://lost.foo-projects.org/~dwillia2/git/iop: (28 commits)
  ioatdma: add the unisys "i/oat" pci vendor/device id
  ARM: Add drivers/dma to arch/arm/Kconfig
  iop3xx: surface the iop3xx DMA and AAU units to the iop-adma driver
  iop13xx: surface the iop13xx adma units to the iop-adma driver
  dmaengine: driver for the iop32x, iop33x, and iop13xx raid engines
  md: remove raid5 compute_block and compute_parity5
  md: handle_stripe5 - request io processing in raid5_run_ops
  md: handle_stripe5 - add request/completion logic for async expand ops
  md: handle_stripe5 - add request/completion logic for async read ops
  md: handle_stripe5 - add request/completion logic for async check ops
  md: handle_stripe5 - add request/completion logic for async compute ops
  md: handle_stripe5 - add request/completion logic for async write ops
  md: common infrastructure for running operations with raid5_run_ops
  md: raid5_run_ops - run stripe operations outside sh->lock
  raid5: replace custom debug PRINTKs with standard pr_debug
  raid5: refactor handle_stripe5 and handle_stripe6 (v3)
  async_tx: add the async_tx api
  xor: make 'xor_blocks' a library routine for use with async_tx
  dmaengine: make clients responsible for managing channels
  dmaengine: refactor dmaengine around dma_async_tx_descriptor
  ...

* 'splice-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block:
  splice: fix offset mangling with direct splicing (sendfile)
  security: revalidate rw permissions for sys_splice and sys_vmsplice
  relay: fixup kerneldoc comment
  relay: fix bogus cast in subbuf_splice_actor()

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Workaround for a sparse warning in include/asm-mips/mach-tx4927/ioremap.h
  [MIPS] Make show_code static and add __user tag
  [MIPS] Workaround for a sparse warning in include/asm-mips/compat.h
  [MIPS] Add some __user tags
  [MIPS] math-emu minor cleanup
  [MIPS] Kill CONFIG_TX4927BUG_WORKAROUND
  [MIPS] Alchemy: Remove code wrapped by dead symbol CONFIG_FB_XPERT98
  [MIPS] Alchemy: Remove code wrapped by dead symbol CONFIG_AU1000_SRC_CLK
  [MIPS] Alchemy: Remove code wrapped by dead symbol CONFIG_AU1000_USE32K
  [MIPS] Alchemy: Remove code wrapped by dead symbol CONFIG_AU1XXX_PSC_SPI
  [CHAR] Delete leftovers of old Alchemy UART driver

This reverts commit 904f7a3f.

As noted by Peter Anvin:

  "It causes build failures on i386.

   Yet another case of unnecessary divergence between i386 and x86-64
   I'm afraid..."
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  [PATCH] sched: small topology.h cleanup
  [PATCH] sched: fix show_task()/show_tasks() output
  [PATCH] sched: remove stale version info from kernel/sched_debug.c
  [PATCH] sched: allow larger granularity
  [PATCH] sched: fix prio_to_wmult[] for nice 1

[ I re-did the commits to get rid of some bogus merge commit that
  Ingo had. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

trivial cleanup: LOCAL_DISTANCE and REMOTE_DISTANCE are only used in
topology.h and inside an #ifndef section - limit their existence to
that #ifndef.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix show_task()/show_tasks() output:

- there's no sibling info anymore

- the fields were not aligned properly with the description

- get rid of the lazy-TLB output: it's been quite some time since
  we last had a bug there, and when we had a bug it wasnt helped a
  bit by this debug output.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/sched_debug.c referred to CFS -v20, but there's no CFS versioning
needed within the upstream kernel.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Allow granularity up to 100 msecs, instead of 10 msecs.
(needed on larger boxes)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There's a typo in the values in prio_to_wmult[] for nice level 1.  While
it did not cause bad CPU distribution, but caused more rescheduling
between nice-0 and nice-1 tasks than necessary.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include2/asm/mach-tx49xx/ioremap.h:39:52: warning: cast truncates bits from constant value (fff000000 becomes ff000000)
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Cast to a __user pointer via "unsigned long" to get rid of this warning:

include2/asm/compat.h:135:10: warning: cast adds address space to expression (<asn:1>)
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Declaring emulpc and contpc as "unsigned long" can get rid of some casts.
This also get rid of some sparse warnings.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Kill workarounds for very early chip (perhaps pre-TX4927A).
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Noticed by Robert P. J. Day (rpjday@mindspring.com).
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Noticed by Robert P. J. Day (rpjday@mindspring.com).
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Noticed by Robert P. J. Day (rpjday@mindspring.com).
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Noticed by Robert P. J. Day (rpjday@mindspring.com).
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Cc: John Magolan <john.magolan@unisys.com>
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Adds the platform device definitions and the architecture specific support
routines (i.e. register initialization and descriptor formats) for the
iop-adma driver.

Changelog:
* add support for > 1k zero sum buffer sizes
* added dma/aau platform devices to iq80321 and iq80332 setup
* fixed the calculation in iop_desc_is_aligned
* support xor buffer sizes larger than 16MB
* fix places where software descriptors are assumed to be contiguous, only
  hardware descriptors are contiguous for up to a PAGE_SIZE buffer size
* convert to async_tx
* add interrupt support
* add platform devices for 80219 boards
* do not call platform register macros in driver code
* remove switch() statements for compatible register offsets/layouts
* change over to bitmap based capabilities
* remove unnecessary ARM assembly statement
* checkpatch.pl fixes
* gpl v2 only correction
* phys move to dma_async_tx_descriptor

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Adds the platform device definitions and the architecture specific
support routines (i.e. register initialization and descriptor formats) for the
iop-adma driver.

Changelog:
* added 'descriptor pool size' to the platform data
* add base support for buffer sizes larger than 16MB (hw max)
* build error fix from Kirill A. Shutemov
* rebase for async_tx changes
* add interrupt support
* do not call platform register macros in driver code
* remove unnecessary ARM assembly statement
* checkpatch.pl fixes
* gpl v2 only correction

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

The Intel(R) IOP series of i/o processors integrate an Xscale core with
raid acceleration engines.  The capabilities per platform are:

iop219:
 (2) copy engines
iop321:
 (2) copy engines
 (1) xor and block fill engine
iop33x:
 (2) copy and crc32c engines
 (1) xor, xor zero sum, pq, pq zero sum, and block fill engine
iop34x (iop13xx):
 (2) copy, crc32c, xor, xor zero sum, and block fill engines
 (1) copy, crc32c, xor, xor zero sum, pq, pq zero sum, and block fill engine

The driver supports the features of the async_tx api:
* asynchronous notification of operation completion
* implicit (interupt triggered) handling of inter-channel transaction
  dependencies

The driver adapts to the platform it is running by two methods.
1/ #include <asm/arch/adma.h> which defines the hardware specific
   iop_chan_* and iop_desc_* routines as a series of static inline
   functions
2/ The private platform data attached to the platform_device defines the
   capabilities of the channels

20070626: Callbacks are run in a tasklet.  Given the recent discussion on
LKML about killing tasklets in favor of workqueues I did a quick conversion
of the driver.  Raid5 resync performance dropped from 50MB/s to 30MB/s, so
the tasklet implementation remains until a generic softirq interface is
available.

Changelog:
* fixed a slot allocation bug in do_iop13xx_adma_xor that caused too few
slots to be requested eventually leading to data corruption
* enabled the slot allocation routine to attempt to free slots before
returning -ENOMEM
* switched the cleanup routine to solely use the software chain and the
status register to determine if a descriptor is complete.  This is
necessary to support other IOP engines that do not have status writeback
capability
* make the driver iop generic
* modified the allocation routines to understand allocating a group of
slots for a single operation
* added a null xor initialization operation for the xor only channel on
iop3xx
* support xor operations on buffers larger than the hardware maximum
* split the do_* routines into separate prep, src/dest set, submit stages
* added async_tx support (dependent operations initiation at cleanup time)
* simplified group handling
* added interrupt support (callbacks via tasklets)
* brought the pending depth inline with ioat (i.e. 4 descriptors)
* drop dma mapping methods, suggested by Chris Leech
* don't use inline in C files, Adrian Bunk
* remove static tasklet declarations
* make iop_adma_alloc_slots easier to read and remove chances for a
  corrupted descriptor chain
* fix locking bug in iop_adma_alloc_chan_resources, Benjamin Herrenschmidt
* convert capabilities over to dma_cap_mask_t
* fixup sparse warnings
* add descriptor flush before iop_chan_enable
* checkpatch.pl fixes
* gpl v2 only correction
* move set_src, set_dest, submit to async_tx methods
* move group_list and phys to async_tx

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>