- 31 Mar, 2020 4 commits
-
-
Sean Christopherson authored
Move the kvm_x86_ops functions that are used only within the scope of kvm_init() into a separate struct, kvm_x86_init_ops. In addition to identifying the init-only functions without restorting to code comments, this also sets the stage for waiting until after ->hardware_setup() to set kvm_x86_ops. Setting kvm_x86_ops after ->hardware_setup() is desirable as many of the hooks are not usable until ->hardware_setup() completes. No functional change intended. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200321202603.19355-3-sean.j.christopherson@intel.com> Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Pass @opaque to kvm_arch_hardware_setup() and kvm_arch_check_processor_compat() to allow architecture specific code to reference @opaque without having to stash it away in a temporary global variable. This will enable x86 to separate its vendor specific callback ops, which are passed via @opaque, into "init" and "runtime" ops without having to stash away the "init" ops. No functional change intended. Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Tested-by: Cornelia Huck <cohuck@redhat.com> #s390 Acked-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
-
Paolo Bonzini authored
Merge tag 'kvm-ppc-next-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD KVM PPC update for 5.7 * Add a capability for enabling secure guests under the Protected Execution Framework ultravisor * Various bug fixes and cleanups.
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarmPaolo Bonzini authored
KVM/arm updates for Linux 5.7 - GICv4.1 support - 32bit host removal
-
- 30 Mar, 2020 1 commit
-
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fix for error codes - return the proper error to userspace when a signal interrupts the KSM unsharing operation
-
- 27 Mar, 2020 1 commit
-
-
Christian Borntraeger authored
If a signal is pending we might return -ENOMEM instead of -EINTR. We should propagate the proper error during KSM unsharing. unmerge_ksm_pages returns -ERESTARTSYS on signal_pending. This gets translated by entry.S to -EINTR. It is important to get this error code so that userspace can retry. To make this clearer we also add -EINTR to the documentation of the PV_ENABLE call, which calls unmerge_ksm_pages. Fixes: 3ac8e380 ("s390/mm: disable KSM for storage key enabled pages") Reviewed-by:
Janosch Frank <frankja@linux.vnet.ibm.com> Reported-by:
Marc Hartmayer <mhartmay@linux.ibm.com> Tested-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
- 26 Mar, 2020 6 commits
-
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: cleanups for 5.7 - mark sie control block as 512 byte aligned - use fallthrough;
-
Sean Christopherson authored
Fix a copy-paste typo in a comment and error message. Signed-off-by:
-
Sean Christopherson authored
Reset the LRU slot if it becomes invalid when deleting a memslot to fix an out-of-bounds/use-after-free access when searching through memslots. Explicitly check for there being no used slots in search_memslots(), and in the caller of s390's approximation variant. Fixes: 36947254 ("KVM: Dynamically size memslot array based on number of used slots") Reported-by:
Qian Cai <cai@lca.pw> Cc: Peter Xu <peterx@redhat.com> Signed-off-by:
-
Wanpeng Li authored
This patch optimizes the virtual IPI fastpath emulation sequence: write ICR2 send virtual IPI read ICR2 write ICR2 send virtual IPI ==> write ICR write ICR We can observe ~0.67% performance improvement for IPI microbenchmark (https://lore.kernel.org/kvm/20171219085010.4081-1-ynorov@caviumnetworks.com/) on Skylake server. Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Message-Id: <1585189202-1708-4-git-send-email-wanpengli@tencent.com> Signed-off-by:
-
Wanpeng Li authored
Delay read msr data until we identify guest accesses ICR MSR to avoid to penalize all other MSR writes. Signed-off-by:
-
Paul Mackerras authored
At present, on Power systems with Protected Execution Facility hardware and an ultravisor, a KVM guest can transition to being a secure guest at will. Userspace (QEMU) has no way of knowing whether a host system is capable of running secure guests. This will present a problem in future when the ultravisor is capable of migrating secure guests from one host to another, because virtualization management software will have no way to ensure that secure guests only run in domains where all of the hosts can support secure guests. This adds a VM capability which has two functions: (a) userspace can query it to find out whether the host can support secure guests, and (b) userspace can enable it for a guest, which allows that guest to become a secure guest. If userspace does not enable it, KVM will return an error when the ultravisor does the hypercall that indicates that the guest is starting to transition to a secure guest. The ultravisor will then abort the transition and the guest will terminate. Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Reviewed-by:
Ram Pai <linuxram@us.ibm.com>
-
- 24 Mar, 2020 28 commits
-
-
Marc Zyngier authored
Goodbye KVM/arm Signed-off-by: -
Marc Zyngier authored
Signed-off-by: -
Marc Zyngier authored
The vgic-state debugfs file could do with showing the pending state of the HW-backed SGIs. Plug it into the low-level code. Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Reviewed-by:
Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20200304203330.4967-24-maz@kernel.org
-
Marc Zyngier authored
Just like for VLPIs, it is beneficial to avoid trapping on WFI when the vcpu is using the GICv4.1 SGIs. Add such a check to vcpu_clear_wfx_traps(). Signed-off-by:
-
Marc Zyngier authored
Each time a Group-enable bit gets flipped, the state of these bits needs to be forwarded to the hardware. This is a pretty heavy handed operation, requiring all vcpus to reload their GICv4 configuration. It is thus implemented as a new request type. These enable bits are programmed into the HW by setting the VGrp{0,1}En fields of GICR_VPENDBASER when the vPEs are made resident again. Of course, we only support Group-1 for now... Signed-off-by: -
Marc Zyngier authored
The GICv4.1 architecture gives the hypervisor the option to let the guest choose whether it wants the good old SGIs with an active state, or the new, HW-based ones that do not have one. For this, plumb the configuration of SGIs into the GICv3 MMIO handling, present the GICD_TYPER2.nASSGIcap to the guest, and handle the GICD_CTLR.nASSGIreq setting. In order to be able to deal with the restore of a guest, also apply the GICD_CTLR.nASSGIreq setting at first run so that we can move the restored SGIs to the HW if that's what the guest had selected in a previous life. Signed-off-by:
-
Marc Zyngier authored
In order to let a guest buy in the new, active-less SGIs, we need to be able to switch between the two modes. Handle this by stopping all guest activity, transfer the state from one mode to the other, and resume the guest. Nothing calls this code so far, but a later patch will plug it into the MMIO emulation. Signed-off-by:
-
Marc Zyngier authored
Most of the GICv3 emulation code that deals with SGIs now has to be aware of the v4.1 capabilities in order to benefit from it. Add such support, keyed on the interrupt having the hw flag set and being a SGI. Signed-off-by:
-
Marc Zyngier authored
As GICv4.1 understands the life cycle of doorbells (instead of just randomly firing them at the most inconvenient time), just enable them at irq_request time, and be done with it. Signed-off-by:
-
Marc Zyngier authored
Now that we have HW-accelerated SGIs being delivered to VPEs, it becomes required to map the VPEs on all ITSs instead of relying on the lazy approach that we would use when using the ITS-list mechanism. Signed-off-by:
-
Marc Zyngier authored
Add the SGI configuration entry point for KVM to use. Signed-off-by:
-
Marc Zyngier authored
Allocate per-VPE SGIs when initializing the GIC-specific part of the VPE data structure. Signed-off-by:
-
Marc Zyngier authored
In order to hide some of the differences between v4.0 and v4.1, move the doorbell management out of the KVM code, and into the GICv4-specific layer. This allows the calling code to ask for the doorbell when blocking, and otherwise to leave the doorbell permanently disabled. This matches the v4.1 code perfectly, and only results in a minor refactoring of the v4.0 code. Signed-off-by:
-
Marc Zyngier authored
Just like for vLPIs, there is some configuration information that cannot be directly communicated through the normal irqchip API, and we have to use our good old friend set_vcpu_affinity as a side-band communication mechanism. This is used to configure group and priority for a given vSGI. Signed-off-by:
-
Marc Zyngier authored
To implement the get/set_irqchip_state callbacks (limited to the PENDING state), we have to use a particular set of hacks: - Reading the pending state is done by using a pair of new redistributor registers (GICR_VSGIR, GICR_VSGIPENDR), which allow the 16 interrupts state to be retrieved. - Setting the pending state is done by generating it as we'd otherwise do for a guest (writing to GITS_SGIR). - Clearing the pending state is done by emitting a VSGI command with the "clear" bit set. This requires some interesting locking though: - When talking to the redistributor, we must make sure that the VPE affinity doesn't change, hence taking the VPE lock. - At the same time, we must ensure that nobody accesses the same redistributor's GICR_VSGIR registers for a different VPE, which would corrupt the reading of the pending bits. We thus take the per-RD spinlock. Much fun. Signed-off-by:
-
Marc Zyngier authored
Implement mask/unmask for virtual SGIs by calling into the configuration helper. Signed-off-by:
-
Marc Zyngier authored
The GICv4.1 ITS has yet another new command (VSGI) which allows a VPE-targeted SGI to be configured (or have its pending state cleared). Add support for this command and plumb it into the activate irqdomain callback so that it is ready to be used. Signed-off-by:
-
Marc Zyngier authored
Since GICv4.1 has the capability to inject 16 SGIs into each VPE, and that I'm keen not to invent too many specific interfaces to manipulate these interrupts, let's pretend that each of these SGIs is an actual Linux interrupt. For that matter, let's introduce a minimal irqchip and irqdomain setup that will get fleshed up in the following patches. Signed-off-by:
-
Marc Zyngier authored
Drop the KVM/arm entries from the MAINTAINERS file. Signed-off-by: -
Marc Zyngier authored
Although we have to bounce between HYP and SVC to decompress and relocate the kernel, we don't need to be able to use it in the kernel itself. So let's drop the functionnality. Since the vectors are never changed, there is no need to reset them either, and nobody calls that stub anyway. The last function (SOFT_RESTART) is still present in order to support kexec. Signed-off-by: -
Marc Zyngier authored
We used to use a set of macros to provide support of vgic-v3 to 32bit without duplicating everything. We don't need it anymore, so drop it. Signed-off-by:
Olof Johansson <olof@lixom.net> Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Will Deacon <will@kernel.org> Acked-by:
Vladimir Murzin <vladimir.murzin@arm.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Christoffer Dall <christoffer.dall@arm.com>
-
Marc Zyngier authored
Remove all traces of Stage-2 and HYP page table support. Signed-off-by:
-
Marc Zyngier authored
That's it. Remove all references to KVM itself, and document that although it is no more, the ABI between SVC and HYP still exists. Signed-off-by:
-
Marc Zyngier authored
Only one platform is building KVM by default. How crazy! Remove it whilst nobody is watching. Signed-off-by:
-
Marc Zyngier authored
As we're about to drop KVM/arm on the floor, carefully unplug it from the build system. Signed-off-by:
-
Laurent Dufour authored
When the call to UV_REGISTER_MEM_SLOT is failing, for instance because there is not enough free secured memory, the Hypervisor (HV) has to call UV_RETURN to report the error to the Ultravisor (UV). Then the UV will call H_SVM_INIT_ABORT to abort the securing phase and go back to the calling VM. If the kvm->arch.secure_guest is not set, in the return path rfid is called but there is no valid context to get back to the SVM since the Hcall has been routed by the Ultravisor. Move the setting of kvm->arch.secure_guest earlier in kvmppc_h_svm_init_start() so in the return path, UV_RETURN will be called instead of rfid. Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by:
Fabiano Rosas <farosas@linux.ibm.com> Signed-off-by:
-
Laurent Dufour authored
The Hcall named H_SVM_* are reserved to the Ultravisor. However, nothing prevent a malicious VM or SVM to call them. This could lead to weird result and should be filtered out. Checking the Secure bit of the calling MSR ensure that the call is coming from either the Ultravisor or a SVM. But any system call made from a SVM are going through the Ultravisor, and the Ultravisor should filter out these malicious call. This way, only the Ultravisor is able to make such a Hcall. Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Ram Pai <linuxram@us.ibnm.com> Signed-off-by:
-
Fabiano Rosas authored
kvmppc_uvmem_init checks for Ultravisor support and returns early if it is not present. Calling kvmppc_uvmem_free at module exit will cause an Oops: $ modprobe -r kvm-hv Oops: Kernel access of bad area, sig: 11 [#1] <snip> NIP: c000000000789e90 LR: c000000000789e8c CTR: c000000000401030 REGS: c000003fa7bab9a0 TRAP: 0300 Not tainted (5.6.0-rc6-00033-g6c90b86a-dirty) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24002282 XER: 00000000 CFAR: c000000000dae880 DAR: 0000000000000008 DSISR: 40000000 IRQMASK: 1 GPR00: c000000000789e8c c000003fa7babc30 c0000000016fe500 0000000000000000 GPR04: 0000000000000000 0000000000000006 0000000000000000 c000003faf205c00 GPR08: 0000000000000000 0000000000000001 000000008000002d c00800000ddde140 GPR12: c000000000401030 c000003ffffd9080 0000000000000001 0000000000000000 GPR16: 0000000000000000 0000000000000000 000000013aad0074 000000013aaac978 GPR20: 000000013aad0070 0000000000000000 00007fffd1b37158 0000000000000000 GPR24: 000000014fef0d58 0000000000000000 000000014fef0cf0 0000000000000001 GPR28: 0000000000000000 0000000000000000 c0000000018b2a60 0000000000000000 NIP [c000000000789e90] percpu_ref_kill_and_confirm+0x40/0x170 LR [c000000000789e8c] percpu_ref_kill_and_confirm+0x3c/0x170 Call Trace: [c000003fa7babc30] [c000003faf2064d4] 0xc000003faf2064d4 (unreliable) [c000003fa7babcb0] [c000000000400e8c] dev_pagemap_kill+0x6c/0x80 [c000003fa7babcd0] [c000000000401064] memunmap_pages+0x34/0x2f0 [c000003fa7babd50] [c00800000dddd548] kvmppc_uvmem_free+0x30/0x80 [kvm_hv] [c000003fa7babd80] [c00800000ddcef18] kvmppc_book3s_exit_hv+0x20/0x78 [kvm_hv] [c000003fa7babda0] [c0000000002084d0] sys_delete_module+0x1d0/0x2c0 [c000003fa7babe20] [c00000000000b9d0] system_call+0x5c/0x68 Instruction dump: 3fc2001b fb81ffe0 fba1ffe8 fbe1fff8 7c7f1b78 7c9c2378 3bde4560 7fc3f378 f8010010 f821ff81 486249a1 60000000 <e93f0008> 7c7d1b78 712a0002 40820084 ---[ end trace 5774ef4dc2c98279 ]--- So this patch checks if kvmppc_uvmem_init actually allocated anything before running kvmppc_uvmem_free. Fixes: ca9f4942 ("KVM: PPC: Book3S HV: Support for running secure guests") Cc: stable@vger.kernel.org # v5.5+ Reported-by:
Greg Kurz <groug@kaod.org> Signed-off-by:
-
