- 13 May, 2014 13 commits
-
-
Damien Lespiau authored
Fed up with having that long list_for_each_entry() invocation? Use for_each_intel_crtc()! Signed-off-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Damien Lespiau authored
Signed-off-by:
-
Damien Lespiau authored
That's not necessary and makes the code not as neat as it could be. Signed-off-by:
-
Daniel Vetter authored
Somehow UXA submits a completely bogus DR4 value since essentially forever. It was originally introduced in commit bade7d7d2505a10a8a7d24b084aff9742e2d6d64 Author: Eric Anholt <eric@anholt.net> Date: Fri Jun 6 14:03:25 2008 -0700 Use the DRM for submitting batchbuffers when available. and dutifully copied around ever since. Since we want to keep the general dirt catching around just special case the UXA value. This regression was introduced in commit 9cb34664 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Apr 24 08:09:11 2014 +0200 drm/i915: Catch dirt in unused execbuffer fields Comment from Chris' review: "To be fair, it is a sensible value if one supposes a Region style API to cliprects. Under that API, DR[14] define the extents of the clip region, and ((0,0), (0,0)) [DR1==DR4==0] would mean all clipped, do not draw anything." v2: Pimp commit message a bit and remove the double space. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78494 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jörg Otte <jrg.otte@gmail.com> Acked-by:Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Daniel Vetter authored
The fence pin count should always be <= the bo pin count. If that's not the case then we have a funny problem and are leaking references somewhere. Which means we can catch fence pin leaks by checking for the same upper limit as we do for the bo pin count. Inspired by a discussion with Ville about a fence leak igt testcase. v2: Also check for fence->pin_count <= ggtt_vma->pin_count, since that might catch a leak even quicker. Also de-inline them, they're getting too big. v3: Don't separately check for MAX_PIN_COUNT since the > vma->pin_count check will catch that already (Chris). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: -
Ville Syrjälä authored
The pipe might not start to actually run until the port has been enabled (depends on the platform and port type). So don't try to wait for vblank after we enabled the pipe but haven't yet enabled the port. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Ville Syrjälä authored
We already moved the plane disable/enable to happen as the first/last thing on every other platforms. Follow suit with gmch platforms. Signed-off-by:
-
Oscar Mateo authored
This is missing in: commit 78325f2d Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Tue Apr 29 14:52:29 2014 -0700 drm/i915: Virtualize the ringbuffer signal func Looks to me like a rebase side-effect... Signed-off-by:
Oscar Mateo <oscar.mateo@intel.com> Signed-off-by:
-
Ville Syrjälä authored
gen8_stolen_size() is missing __init, so add it. Also all the intel_stolen_funcs structures can be marked __initconst. intel_stolen_ids[] can also be made const if we replace the __initdata with __initconst. Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Damien Lespiau authored
CHV uses the same bits as SNB/VLV to code the Graphics Mode Select field (GFX stolen memory size) with the addition of finer granularity modes: 4MB increments from 0x11 (8MB) to 0x1d. Values strictly above 0x1d are either reserved or not supported. v2: 4MB increments, not 8MB. 32MB has been omitted from the list of new values (Ville Syrjälä) v3: Also correctly interpret GGMS (GTT Graphics Memory Size) (Ville Syrjälä) v4: Don't assign a value that needs 20bits or more to a u16 (Rafael Barbalho) [vsyrjala: v5: Split from i915 changes and add chv_stolen_funcs] Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Reviewed-by:Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Rafael Barbalho <rafael.barbalho@intel.com> Tested-by:
-
Damien Lespiau authored
CHV uses the same bits as SNB/VLV to code the Graphics Mode Select field (GFX stolen memory size) with the addition of finer granularity modes: 4MB increments from 0x11 (8MB) to 0x1d. Values strictly above 0x1d are either reserved or not supported. v2: 4MB increments, not 8MB. 32MB has been omitted from the list of new values (Ville Syrjälä) v3: Also correctly interpret GGMS (GTT Graphics Memory Size) (Ville Syrjälä) v4: Don't assign a value that needs 20bits or more to a u16 (Rafael Barbalho) [vsyrjala: v5: Split the early quirks to another patch] Reviewed-by: -
Ville Syrjälä authored
No CRT output on CHV, so don't call intel_crt_init(). v2: Don't disable CRT on HAS. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1) Reviewed-by:
-
Ville Syrjälä authored
Add chv_crtc_clock_get() to read out the DPLL settings. Signed-off-by:
Imre Deak <imre.deak@intel.com> [danvet: Fix compile due to bikeshedded headers in an earlier patch.] Signed-off-by:
-
- 12 May, 2014 16 commits
-
-
Chon Ming Lee authored
With additional of pipe C, current 1 bit registers for pipe select for HDMI and DP are no longer able to gather for 3 pipes. As a result, new bits location in the same registers are added. For HDMI, VLV uses bit 30, CHV uses bit 24-25. For DP, VLV uses bit 30, CHV uses bit 16-17. Reviewed-by:
Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by:
-
Chon Ming Lee authored
Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: -
Chon Ming Lee authored
Added programming PLL for CHV based on "Application note for 1273 CHV Display phy". v2: -Break the common lane reset into another patch. -Break the clock calculation into another patch. -The changes are based on Ville review. -Rework based on DPIO register define naming convention change. -Break the dpio write into few lines to improve readability. -Correct the udelay during chv_enable_pll. -clean up some magic numbers with some new define. -program the afc recal bit which was missed. v3: Based on Ville review - minor correction of the bit defination - add deassert/propagate data lane reset v4: Corrected the udelay between dclkp enable and pll enable. Minor comment and better way to clear the TX lane reset. v5: Squash in fixup from Rafael Barbalho. [vsyrjala: v6: Polish the defines (Imre)] Reviewed-by: -
Chon Ming Lee authored
Based on the chv clock limit, find the best divisor. The divisor data has been verified with this spreadsheet. P1273_DPLL_Programming Spreadsheet. v2: Rebase the code and change the chv_find_best_dpll based on new standard way to use intel_PLL_is_valid. Besides, clean up some extra variables. v3: Ville suggest better fixed point for m2 calculation. v4: -Add comment for the limit is compute using fast clock. (Ville) -Don't pass the request clock to chv_clock, as the same function will be use clock readout, which doens't have request clock. (Ville) -Add and use DIV_ROUND_CLOSEST_ULL to consistent with other clock calculation. (Ville) -Fix the dp m2 after m2 has stored fixed point. (Ville) Signed-off-by:
-
Chon Ming Lee authored
During cold boot, the display controller needs to deassert the common lane reset. Only do it once during intel_init_dpio for both PHYx2 and PHYx1. Besides, assert the common lane reset when disable pll. This still to be determined whether need to do it by driver. Signed-off-by:
-
Chon Ming Lee authored
Cherryview has 3 pipes. Some of the pll dpio offset calculation is based on pipe number. Need to use vlv_pipe_to_channel to calculate the correct phy channel to use for the pipe. Signed-off-by:
-
Chon Ming Lee authored
The additional DPLL registers added to support Port D. Besides, add some new PHY control and status registers based on B-spec. v2: Based on Ville review - Corrected DPIO_PHY_STATUS offset and name. - Rebase based on upstream change after introduce enum dpio_phy and enum dpio_channel. v3: Rebased on top of Antti's 3-pipe prep patch. Note that the new offsets for the DPLL registers aren't in place yet, so this introduces a slight regression. But since 3 pipe support isn't fully enabled yet anyaway in -internal this shouldn't matter too much. Signed-off-by: -
Chon Ming Lee authored
CHV has 2 display phys. First phy (IOSF offset 0x1A) has two channels, and second phy (IOSF offset 0x12) has single channel. The first phy is used for port B and port C, while second phy is only for port D. v2: Move the pipe to determine which phy to select for vlv_dpio_read/vlv_dpio_write to another patch. (Daniel) v3: Rebase the code based on rework on how to calculate DPIO offset. Signed-off-by:
-
Ville Syrjälä authored
Fill in the sprite bits for DDL1/DDL2 registers, and add DDL3. Still need to write the code to use these... Signed-off-by:
-
Ville Syrjälä authored
v2: Update to also fill in the new num_pipes field. v3: Rebase on top of the pciid extraction. v4: Switch from info->has*ring to info->ring mask. Also add VEBOX support whiel at it. v5: s/CHV_PCI_IDS/CHV_IDS/, and drop the trailing '\' Signed-off-by:
-
Ville Syrjälä authored
CHV clock gating isn't identical to VLV, so add a new function for it. This is only a start, and further changes are needed as the details become available. Signed-off-by:
-
Ville Syrjälä authored
Make i915_gem_interrupt debugfs file functional on CHV. FIXME: Extract helpers for gt/display blocks to shrink the function a bit and avoid duplication between bdw/chv (and other similar cases for upstream). Signed-off-by:
-
Daniel Vetter authored
Inspired by a review bikeshed from Jani. Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Ville Syrjälä authored
CHV has the Gen8 master interrupt register, as well as Gen8 GT/PCU interrupt registers. The display block is based on VLV, with the main difference of adding pipe C. v2: Rewrite the order of operations to make more sense Don't bail out if MASTER_CTL register doesn't show an interrupt, as display interrupts aren't reported there. v3: Rebase on top of Egbert Eich's hpd irq handling rework by using the relevant port hotplug logic like for vlv. v4: Rebase on top of Ben's gt irq #define refactoring. v5: Squash in gen8_gt_irq_handler refactoring from Zhao Yakui <yakui.zhao@intel.com> v6: Adapt to upstream changes, dev_priv->irq_received is gone. v7: Enable 3 the commented-out 3 pipe support. v8: Rebase on top of Paulo's irq setup rework, use the renamed macros from upstream. v9: Grab irq_lock around i915_enable_pipestat() FIXME: There's probably some potential for more shared code between bdw and chv. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v2) Reviewed-by: -
Brad Volkin authored
For clients that submit large batch buffers the command parser has a substantial impact on performance. On my HSW ULT system performance drops as much as ~20% on some tests. Most of the time is spent in the command lookup code. Converting that from the current naive search to a hash table lookup reduces the performance drop to ~10%. The choice of value for I915_CMD_HASH_ORDER allows all commands currently used in the parser tables to hash to their own bucket (except for one collision on the render ring). The tradeoff is that it wastes memory. Because the opcodes for the commands in the tables are not particularly well distributed, reducing the order still leaves many buckets empty. The increased collisions don't seem to have a huge impact on the performance gain, but for now anyhow, the parser trades memory for performance. NB: Ville noticed that the error paths through the ring init code will leak memory. I've not addressed that here. We can do a follow up pass to handle all of the leaks. v2: improved comment describing selection of hash key mask (Damien) replace a BUG_ON() with an error return (Tvrtko, Ville) commit message improvements Signed-off-by:
Brad Volkin <bradley.d.volkin@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Use the same code for enabling/disabling planes on all platforms. Rename the functions to reflect that they're no longer specific to any platform. For now we leave the plane enable/disable to ccur at the same old position in the modeset sequence. Signed-off-by:
-
- 07 May, 2014 8 commits
-
-
Chris Wilson authored
During the review of commit 1f70999f Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Jan 27 22:43:07 2014 +0000 drm/i915: Prevent recursion by retiring requests when the ring is full Ville raised the point that our interaction with request->tail was likely to foul up other uses elsewhere (such as hang check comparing ACTHD against requests). However, we also need to restore the implicit retire requests that certain test cases depend upon (e.g. igt/gem_exec_lut_handle), this raises the spectre that the ppgtt will randomly call i915_gpu_idle() and recurse back into intel_ring_begin(). Signed-off-by:
-
Chris Wilson authored
A few improvements to the fallback method for waiting upon ring space: 1. Fix the start/end wait tracepoints to always be paired. 2. Increase responsiveness of checking 3. Mark the process as waiting upon io 4. Check for signal interruptions Signed-off-by:
-
Ben Widawsky authored
There is a good debate to be had about how best to fit the aliasing PPGTT into the code. However, as it stands right now, getting aliasing PPGTT bindings is a hack, and done through implicit arguments. To make this absolutely clear, WARN and return an error if a driver writer tries to do something they shouldn't. I have no issue with an eventual revert of this patch. It makes sense for what we have today. Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
Ben Widawsky authored
It was always the intention to do the topdown allocation for context objects (Chris' idea originally). Unfortunately, I never managed to land the patch, but someone else did, so now we can use it. As a reminder, hardware contexts never need to be in the precious GTT aperture space - which is what is what happens with the normal bottom up allocation we do today. Doing a top down allocation increases the odds that the HW contexts can get out of the way, especially with per FD contexts as is done in full PPGTT Signed-off-by:
-
Imre Deak authored
Signed-off-by:
-
Imre Deak authored
Add runtime PM support for VLV, but leave it disabled. The next patch enables it. The suspend/resume sequence used is based on [1] and [2]. In practice we depend on the GT RC6 mechanism to save the HW context depending on the render and media power wells. By the time we run the runtime suspend callback the display side is also off and the HW context for that is managed by the display power domain framework. Besides the above there are Gunit registers that depend on a system-wide power well. This power well goes off once the device enters any of the S0i[R123] states. To handle this scenario, save/restore these Gunit registers. Note that this is not the complete register set dictated by [2], to remove some overhead, registers that are known not to be used are ignored. Also some registers are fully setup by initialization functions called during resume, these are not saved either. The list of registers can be further reduced, see the TODO note in the code. [1] VLV_gfx_clocking_PM_reset_y12w21d3 / "Driver D3 entry/exit" [2] VLV2_S0IXRegs v2: - unchanged v3: - fix s/GEN6_PMIIR/GEN6_PMIMR/ typo when saving/restoring registers (Ville) v4: - rebased on the previous patch fixing GEN register prefixes Reviewed-by:
-
Imre Deak authored
Atm, none of the RPM callbacks can fail, but the next patch adding RPM support for VLV changes this, so prepare for it. In case one of these callbacks return error RPM will get permanently disabled until the error is explicitly cleared. In the future we could add support for re-enabling it, for example after resetting the HW, but for now - hopefully - we can live with the simpler solution. v2: - propagate the error from the resume callbacks too (Paulo) v3: - fix rebase fail typo around IS_GEN6() check in intel_runtime_suspend() Signed-off-by:
-
Imre Deak authored
Needed by the VLV S0ix context save/restore helpers. v2: - unchanged v3: - use proper GEN register prefixes (Ville) Signed-off-by:
-
- 06 May, 2014 3 commits
-
-
Ville Syrjälä authored
Due to Pipe C DPINVGTT has more bits on CHV. v2: Fix comment to say VLV/CHV (Rafael) Reviewed-by:
-
Ville Syrjälä authored
v2: Rebase on top of Ben's GT interrupt shuffling. Signed-off-by:
-
Ville Syrjälä authored
CHV has pipe C and PSR which cause changes to DPFLIPSTAT. Signed-off-by:
-
