- 15 Sep, 2017 40 commits
-
-
Marcin Nowakowski authored
commit 698b8510 upstream. When ftrace is used with kprobes, it is possible for a kprobe to contain an invalid location (ie. only initialised to 0 and not to a specific location in the code). Trying to perform a cache flush on such location leads to a crash r4k_flush_icache_range(). Fixes: c1bf207d ("MIPS: kprobe: Add support.") Signed-off-by:
Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16296/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Wanpeng Li authored
commit a3641631 upstream. If "i" is the last element in the vcpu->arch.cpuid_entries[] array, it potentially can be exploited the vulnerability. this will out-of-bounds read and write. Luckily, the effect is small: /* when no next entry is found, the current entry[i] is reselected */ for (j = i + 1; ; j = (j + 1) % nent) { struct kvm_cpuid_entry2 *ej = &vcpu->arch.cpuid_entries[j]; if (ej->function == e->function) { It reads ej->maxphyaddr, which is user controlled. However... ej->flags |= KVM_CPUID_FLAG_STATE_READ_NEXT; After cpuid_entries there is int maxphyaddr; struct x86_emulate_ctxt emulate_ctxt; /* 16-byte aligned */ So we have: - cpuid_entries at offset 1B50 (6992) - maxphyaddr at offset 27D0 (6992 + 3200 = 10192) - padding at 27D4...27DF - emulate_ctxt at 27E0 And it writes in the padding. Pfew, writing the ops field of emulate_ctxt would have been much worse. This patch fixes it by modding the index to avoid the out-of-bounds access. Worst case, i == j and ej->function == e->function, the loop can bail out. Reported-by:
Moguofang <moguofang@huawei.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Guofang Mo <moguofang@huawei.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
SeongJae Park authored
commit 14fc42fa upstream. Few shell command examples in perf-script-python.txt has few nitpicks include: - tools/perf/scripts/python directory listing command is unnecessarily repeated. - few examples contain additional information in command prompt unnecessarily and inconsistently. This commit fixes them to enhance readability of the document. Signed-off-by:
SeongJae Park <sj38.park@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tom Zanussi <tzanussi@gmail.com> Fixes: cff68e58 ("perf/scripts: Add perf-trace-python Documentation") Link: http://lkml.kernel.org/r/20170530111827.21732-4-sj38.park@gmail.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
SeongJae Park authored
commit 1bf8d5a4 upstream. Default function signature of trace_unhandled() got changed to include a field dict, but its documentation, perf-script-python.txt has not been updated. Fix it. Signed-off-by:
-
SeongJae Park authored
commit 26ddb872 upstream. This commit fixes wrong code snippets for trace_begin() and trace_end() function example definition. Signed-off-by:
-
SeongJae Park authored
commit 34d4453d upstream. This commit fixes two errors in documents for perf-script-python and perf-script-perl as below: - /sys/kernel/debug/tracing events -> /sys/kernel/debug/tracing/events/ - trace_handled -> trace_unhandled Signed-off-by:
-
SeongJae Park authored
commit c76132dc upstream. Script generated by the '--gen-script' option contains an outdated comment. It mentions a 'perf-trace-python' document while it has been renamed to 'perf-script-python'. Fix it. Signed-off-by:
-
SeongJae Park authored
commit d89269a8 upstream. An example in perf-probe documentation for pattern of function name based probe addition is not providing example command for that case. This commit fixes the example to give appropriate example command. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Taeung Song <treeze.taeung@gmail.com> Fixes: ee391de8 ("perf probe: Update perf probe document") Link: http://lkml.kernel.org/r/20170507103642.30560-1-sj38.park@gmail.comSigned-off-by:
-
Ulrik De Bie authored
commit 47eb0c8b upstream. The Lifebook E546 and E557 touchpad were also not functioning and worked after running: echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled Add them to the list of machines that need this workaround. Signed-off-by:
Ulrik De Bie <ulrik.debie-os@e2big.org> Reviewed-by:
Arjan Opmeer <arjan@opmeer.net> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Dan Carpenter authored
commit f0c62e98 upstream. If vmalloc() fails then we need to a bit of cleanup before returning. Fixes: fb1d9738 ("drm/vmwgfx: Add DRM driver for VMware Virtual GPU") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Max Filippov authored
commit d220b942 upstream. ethoc_reset enables device interrupts, ethoc_interrupt may schedule a NAPI poll before NAPI is enabled in the ethoc_open, which results in device being unable to send or receive anything until it's closed and reopened. In case the device is flooded with ingress packets it may be unable to recover at all. Move napi_enable above ethoc_reset in the ethoc_open to fix that. Fixes: a1702857 ("net: Add support for the OpenCores 10/100 Mbps Ethernet MAC.") Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Reviewed-by:
Tobias Klauser <tklauser@distanz.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Marc Zyngier authored
commit 33b5c388 upstream. We currently have the HSCTLR.A bit set, trapping unaligned accesses at HYP, but we're not really prepared to deal with it. Since the rest of the kernel is pretty happy about that, let's follow its example and set HSCTLR.A to zero. Modern CPUs don't really care. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <cdall@linaro.org> Signed-off-by:
-
Marc Zyngier authored
commit 78fd6dcf upstream. We currently have the SCTLR_EL2.A bit set, trapping unaligned accesses at EL2, but we're not really prepared to deal with it. So far, this has been unnoticed, until GCC 7 started emitting those (in particular 64bit writes on a 32bit boundary). Since the rest of the kernel is pretty happy about that, let's follow its example and set SCTLR_EL2.A to zero. Modern CPUs don't really care. Reported-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
-
Marc Zyngier authored
commit d68c1f7f upstream. __do_hyp_init has the rather bad habit of ignoring RES1 bits and writing them back as zero. On a v8.0-8.2 CPU, this doesn't do anything bad, but may end-up being pretty nasty on future revisions of the architecture. Let's preserve those bits so that we don't have to fix this later on. Signed-off-by:
-
Wanpeng Li authored
commit d4912215 upstream. WARNING: CPU: 3 PID: 2840 at arch/x86/kvm/vmx.c:10966 nested_vmx_vmexit+0xdcd/0xde0 [kvm_intel] CPU: 3 PID: 2840 Comm: qemu-system-x86 Tainted: G OE 4.12.0-rc3+ #23 RIP: 0010:nested_vmx_vmexit+0xdcd/0xde0 [kvm_intel] Call Trace: ? kvm_check_async_pf_completion+0xef/0x120 [kvm] ? rcu_read_lock_sched_held+0x79/0x80 vmx_queue_exception+0x104/0x160 [kvm_intel] ? vmx_queue_exception+0x104/0x160 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x1171/0x1ce0 [kvm] ? kvm_arch_vcpu_load+0x47/0x240 [kvm] ? kvm_arch_vcpu_load+0x62/0x240 [kvm] kvm_vcpu_ioctl+0x384/0x7b0 [kvm] ? kvm_vcpu_ioctl+0x384/0x7b0 [kvm] ? __fget+0xf3/0x210 do_vfs_ioctl+0xa4/0x700 ? __fget+0x114/0x210 SyS_ioctl+0x79/0x90 do_syscall_64+0x81/0x220 entry_SYSCALL64_slow_path+0x25/0x25 This is triggered occasionally by running both win7 and win2016 in L2, in addition, EPT is disabled on both L1 and L2. It can't be reproduced easily. Commit 0b6ac343 (KVM: nVMX: Correct handling of exception injection) mentioned that "KVM wants to inject page-faults which it got to the guest. This function assumes it is called with the exit reason in vmcs02 being a #PF exception". Commit e011c663 (KVM: nVMX: Check all exceptions for intercept during delivery to L2) allows to check all exceptions for intercept during delivery to L2. However, there is no guarantee the exit reason is exception currently, when there is an external interrupt occurred on host, maybe a time interrupt for host which should not be injected to guest, and somewhere queues an exception, then the function nested_vmx_check_exception() will be called and the vmexit emulation codes will try to emulate the "Acknowledge interrupt on exit" behavior, the warning is triggered. Reusing the exit reason from the L2->L0 vmexit is wrong in this case, the reason must always be EXCEPTION_NMI when injecting an exception into L1 as a nested vmexit. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Sebastian Parschauer authored
commit 3db28271 upstream. This mouse is also known under other IDs. It needs the quirk ALWAYS_POLL or will disconnect in runlevel 1 or 3. Signed-off-by:
Sebastian Parschauer <sparschauer@suse.de> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Vasilis Liaskovitis authored
commit d529a4ad upstream. Like other switches, the Aten CS-1758 KVM switch needs a quirk to avoid spewing errors: [12599018.071059] usb 5-2: input irq status -75 received [12599018.079053] usb 5-2: input irq status -75 received Signed-off-by:
Vasilis Liaskovitis <vliaskovitis@suse.com> Signed-off-by:
-
Oscar Campos authored
commit deaba636 upstream. Add quirks for several corsair gaming devices to avoid long delays on report initialization Supported devices: - Corsair K65RGB Rapidfire Gaming Keyboard - Corsair K70RGB Rapidfire Gaming Keyboard - Corsair Scimitar Pro RGB Gaming Mouse Signed-off-by:
Oscar Campos <oscar.campos@member.fsf.org> Signed-off-by:
-
Colin Ian King authored
commit ed9ab428 upstream. Quirking the following AMI USB device with ALWAYS_POLL fixes an AMI virtual keyboard and mouse from not responding and timing out when it is attached to a ppc64el Power 8 system and when we have some rapid open/closes on the mouse device. usb 1-3: new high-speed USB device number 2 using xhci_hcd usb 1-3: New USB device found, idVendor=046b, idProduct=ff01 usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3: Product: Virtual Hub usb 1-3: Manufacturer: American Megatrends Inc. usb 1-3: SerialNumber: serial usb 1-3.3: new high-speed USB device number 3 using xhci_hcd usb 1-3.3: New USB device found, idVendor=046b, idProduct=ff31 usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3.3: Product: Virtual HardDisk Device usb 1-3.3: Manufacturer: American Megatrends Inc. usb 1-3.4: new low-speed USB device number 4 using xhci_hcd usb 1-3.4: New USB device found, idVendor=046b, idProduct=ff10 usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-3.4: Product: Virtual Keyboard and Mouse usb 1-3.4: Manufacturer: American Megatrends Inc. With the quirk I have not been able to trigger the issue with half an hour of saturation soak testing. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Marcel Hasler authored
commit 8aa2cc7e upstream. The DolphinBar by Mayflash (identified as Dragonrise) needs HID_QUIRK_MULTI_INPUT to split it up into four input devices. Without this quirk the adapter is falsely recognized as a tablet. See also bug 115841 (https://bugzilla.kernel.org/show_bug.cgi?id=115841). Signed-off-by:
Marcel Hasler <mahasler@gmail.com> Signed-off-by:
-
Alex Wood authored
commit f83f90cf upstream. The Futaba TOSD-5711BB VFD crashes when the initial HID report is requested, register the display in hid-ids and tell hid-quirks to not do the init. Signed-off-by:
Alex Wood <thetewood@gmail.com> Signed-off-by:
-
Daniel Keller authored
commit 2ae3986b upstream. Adding support for not JP versions of the Microsoft Surface 4 Type Cover Pro [jkosina@suse.cz: The identical patch has been sent by Jeff Farthing, so I am including his signoff as well] Signed-off-by:
Jeff Farthing <jeff@jfarthing.com> Signed-off-by:
Daniel Keller <daniel.keller@gcd.de> Signed-off-by:
-
Marcel Hasler authored
commit b2554000 upstream. All known gamepad adapters by Mayflash (identified as Dragonrise) need HID_QUIRK_MULTI_INPUT to split them up into four input devices. Without this quirk those adapters are falsely recognized as tablets. Fixes bug 115841 (https://bugzilla.kernel.org/show_bug.cgi?id=115841). Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Steinar H. Gunderson authored
commit 4973ca9a upstream. The Akai MIDImix (09e8:0031) is a MIDI fader controller that speaks regular MIDI and works well with Linux. However, initialization gets delayed due to reports timeout: [3643645.631124] hid-generic 0003:09E8:0031.0020: timeout initializing reports [3643645.632416] hid-generic 0003:09E8:0031.0020: hiddev0: USB HID v1.11 Device [AKAI MIDI Mix] on usb-0000:00:14.0-2/input0 Adding "usbhid.quirks=0x09e8:0x0031:0x20000000" on the kernel command line makes the issues go away. Signed-off-by:
Steinar H. Gunderson <sgunderson@bigfoot.com> Signed-off-by:
-
Marian Krivoš authored
commit 3da30bfc upstream. Add quirk for Corsair STRAFE keyboard, similarly to what we've been doing for other CORSAIR devices already, in order to avoid long delays during boot. [jkosina@suse.cz: reword changelog a little bit] Signed-off-by:
Marian Krivos <marian.krivos@gmail.com> Signed-off-by:
-
Yuta Kobayashi authored
commit b490a853 upstream. Adding support for the Microsoft Surface 4 Type Cover Pro (JP). Signed-off-by:
Yuta Kobayashi <alu.ula@outlook.com> Signed-off-by:
-
Trent Lloyd authored
commit 282bf1fe upstream. These devices feature multiple interfaces/endpoints: a legacy BIOS/boot interface (endpoint 0x81), as well as 2 corsair-specific keyboard interfaces (endpoint 0x82, 0x83 IN/0x03 OUT) and an RGB LED control interface (endpoint 0x84 IN/0x04 OUT) Because the extra 3 interfaces are not of subclass USB_INTERFACE_SUBCLASS_BOOT, HID_QUIRK_NOGET is not automatically set on them and a 10s timeout per-endpoint (30s per device) occurs initialising reports on boot. We configure HID_QUIRK_NO_INIT_REPORTS for these devices. Additionally the left-side G1-G18 macro keys on the K95RGB generate output on the un-opened 0x82/0x83 endpoints which causes the keyboard to stop responding waiting for this event to be collected. We enable HID_QUIRK_ALWAYS_POLL to prevent this situation from occurring. Signed-off-by:
Trent Lloyd <trent@lloyd.id.au> Tested-by:
SUGNIAUX Wilfried <wsu@ppharm2k20.net> Signed-off-by:
-
Nazar Mokrynskyi authored
commit 567a44ec upstream. Needed for v2 of the device firmware, otherwise kernel will stuck for few seconds and throw "usb_submit_urb(ctrl) failed: -1" early on system boot. Signed-off-by:
Nazar Mokrynskyi <nazar@mokrynskyi.com> Reviewed-by:
-
Daniel Bristot de Oliveira authored
commit c14022bf upstream. The device which identifies itself as a "USB Keykoard" (no typo) with VID:PID 1a2c:0027 does not seem to be handling the reports initialization very well. This results in a "usb_submit_urb(ctrl) failed: -1" message from the kernel when connected, and a delay before its initialization. It can also cause the hang the system. This patch adds the quirk for this device, which causes the delay to disappear. It is named as "USB Keykoard2" because the "USB Keykoard" already exists. Signed-off-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by:
-
Stafford Horne authored
commit a382c30c upstream. The midi controller times-out while initializing reports, this causes boot to take an extra 10 seconds. The device descriptor advertises that it has an internal HID device but seems to not actually do anything useful. Signed-off-by:
Stafford Horne <shorne@gmail.com> Reviewed-by:
-
Benjamin Tissoires authored
commit 962b7a0e upstream. dmesg shows a lot of: [ 1374.890348] hid-multitouch 0003:0408:3003.0007: usb_submit_urb(ctrl) failed: -1 [ 1384.916388] hid-multitouch 0003:0408:3003.0007: usb_submit_urb(ctrl) failed: -1 [ 1384.916432] hid-multitouch 0003:0408:3003.0007: timeout initializing reports Add the quirk and make the touchscreen happy. Signed-off-by:
Jim lovell <jimlovell777@gmail.com> Signed-off-by:
-
Adrien Vergé authored
commit 33bd2dd0 upstream. All ELAN hid devices seem to require the ALWAYS_POLL quirk. Let's use this quirk for all devices from this vendor, rather than maintaining a list of all its known product IDs. Tested-by:
Adrien Vergé <adrienverge@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Jimmy Berry authored
commit 0d51571d upstream. Without quirk keyboard repeats '6' until volume control is used since it indicates the key is pressed without ever releasing. Signed-off-by:
Jimmy Berry <jimmy@boombatower.com> Signed-off-by:
-
Oliver Schmitt authored
commit b6ad9a26 upstream. The WiiU adapter from Mayflash (see http://www.mayflash.com/Products/NINTENDOWiiU/W009.html) is not working correctly. The "XInput" mode works fine, the controller is recognized as a xbox controller. But it is only possible to connect one controller with this method. In "DInput" mode the device is recognized as some kind of mouse input but no joystick is created. This commit will change this behavior with HID_QUIRK_MULTI_INPUT to split the device into 4 input devices so that it will also create joysticks in /dev/input/js*. Signed-off-by:
Oliver Schmitt <voltumna@gmx.net> Reviewed-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Donavan Lance authored
commit c6956eb7 upstream. Adds support for Microsoft Type Cover 3 with 0x07e2 product ID. Signed-off-by:
Donavan Lance <shvr@fedoraproject.org> Signed-off-by:
-
Benjamin Tissoires authored
commit c9b57724 upstream. Looks like 0x8882 needs the same quirk than 0x8883. Given that both devices claim they are "TPV OpticalTouchScreen" rename the 0x8883 to add its PID in the #define. Reported-by:
Blaine Lee <blaine.j.lee@medtronic.com> Signed-off-by:
-
Stephen Just authored
commit 0439de75 upstream. Adding support for the Microsoft Surface 3 (non-pro) Type Cover. The existing definitions and quirks are actually for the Surface Pro 3 type covers. I've renamed the old constants to reflect that they belong to the Surface Pro 3, and added a new constant and matching code for the Surface 3. Signed-off-by:
Stephen Just <stephenjust@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Reyad Attiyat authored
commit c5b2b809 upstream. The newer firmware on MS Surface 2 tablets causes the type and touch cover keyboards to timeout when waiting for reports. The quirk HID_QUIRK_NO_INIT_REPORTS allows them to function normally. Signed-off-by:
Reyad Attiyat <reyad.attiyat@gmail.com> Signed-off-by:
-
Raimund Roth authored
commit 18eec2cd upstream. Adding support for the Microsoft Surface Pro Power Cover. Signed-off-by:
Raimund Roth <raimundmroth@gmail.gom> Signed-off-by:
-
Sean Young authored
commit 6e5e9a06 upstream. This device supports force feedback and has two ports. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
