- 05 May, 2019 22 commits
-
-
Heiner Kallweit authored
When testing I figured out that most operations signal finish even before we trigger the first delay. Seems like PCI(e) access and memory barriers typically add enough latency. Therefore move the first delay after the first check. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
phy_probe() takes care that all supported modes are advertised, in addition use phy_support_asym_pause() to advertise pause modes. This way we don't have to deal with phylib internals directly. Signed-off-by:
-
YueHaibing authored
Fix sparse warnings: drivers/net/ethernet/xilinx/ll_temac_main.c:66:5: warning: symbol '_temac_ior_be' was not declared. Should it be static? drivers/net/ethernet/xilinx/ll_temac_main.c:71:6: warning: symbol '_temac_iow_be' was not declared. Should it be static? drivers/net/ethernet/xilinx/ll_temac_main.c:76:5: warning: symbol '_temac_ior_le' was not declared. Should it be static? drivers/net/ethernet/xilinx/ll_temac_main.c:81:6: warning: symbol '_temac_iow_le' was not declared. Should it be static? drivers/net/ethernet/xilinx/ll_temac_main.c:648:6: warning: symbol 'ptr_to_txbd' was not declared. Should it be static? drivers/net/ethernet/xilinx/ll_temac_main.c:654:6: warning: symbol 'ptr_from_txbd' was not declared. Should it be static? Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
Fix sparse warning: drivers/net/ethernet/aquantia/atlantic/aq_main.c:26:12: warning: symbol 'aq_ndev_driver_name' was not declared. Should it be static? Reported-by:
-
YueHaibing authored
Fix sparse warning: drivers/net/netdevsim/bus.c:253:5: warning: symbol 'nsim_num_vf' was not declared. Should it be static? Reported-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c: In function 'mvpp2_cls_c2_build_match': drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c:1159:28: warning: variable 'act' set but not used [-Wunused-but-set-variable] It is never used since introduction in commit 90b509b3 ("net: mvpp2: cls: Add Classification offload support") Signed-off-by:
-
Johannes Berg authored
Replace skb->xmit_more usage by netdev_xmit_more(). Fixes: 4f296ede ("drivers: net: aurora: use netdev_xmit_more helper") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
David S. Miller authored
Paolo Abeni says: ==================== net: extend indirect calls helper usage This series applies the indirect calls helper introduced with commit 283c16a2 ("indirect call wrappers: helpers to speed-up indirect calls of builtin") to more hooks inside the network stack. Overall this avoids up to 4 indirect calls for each RX packets, giving small but measurable gain TCP_RR workloads and 5% under UDP flood. ==================== Signed-off-by:
-
Paolo Abeni authored
This avoids an indirect call per {send,recv}msg syscall in the common (IPv6 or IPv4 socket) case. Signed-off-by:Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Paolo Abeni authored
So that we avoid another indirect call per RX packet, if early demux is enabled. Signed-off-by:
-
Paolo Abeni authored
So that we avoid another indirect call per RX packet in the common case. Signed-off-by:
-
Paolo Abeni authored
This avoids an indirect call per RX IPv6/IPv4 packet. Note that we don't want to use the indirect calls helper for taps. Signed-off-by:
-
Dan Carpenter authored
The "pdata->mdio_bus_id" is unsigned so this condition is always true. This patch just removes it. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
The phy_connect() function doesn't return NULL pointers. It returns error pointers on error, so I have updated the check. Fixes: 8425c41d ("net: ll_temac: Extend support to non-device-tree platforms") Signed-off-by:
-
Dan Carpenter authored
The code works fine but the problem is that check for negatives is a no-op: if (arg < 0) i = 0; The "i" value isn't used. We immediately overwrite it with: i = array_index_nospec(arg, MAX_LEC_ITF); The array_index_nospec() macro returns zero if "arg" is out of bounds so this works, but the dead code is confusing and it doesn't look very intentional. Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2019-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.2 Most likely the last patchset of new feature for 5.2, and this time we have quite a lot of new features. Most obvious being rtw88 from Realtek which supports RTL8822BE and RTL8822CE 802.11ac devices. We have also new hardware support for existing drivers and improvements. There's one conflict in iwlwifi, my example conflict resolution below. Major changes: iwlwifi * bump the 20000-series FW API version * work on new hardware continues * RTT confidence indication support for Fine Timing Measurement (FTM) * an improvement in HE (802.11ax) rate-scaling * add command version parsing from the fimware TLVs * add support for a new WoWLAN patterns firmware API rsi * add support for rs9116 mwifiex * add support for SD8987 brcmfmac * add quirk for ACEPC T8 and T11 mini PCs rt2x00 * add RT3883 support qtnfmac * fix debugfs interface to support multiple cards rtw88 * new driver mt76 * share more code across drivers * add support for MT7615 chipset * rework DMA API * tx/rx performance optimizations * use NAPI for tx cleanup on mt76x02 * AP mode support for USB devices * USB stability fixes * tx power handling fixes for 76x2 * endian fixes Conflicts: There's a trivial conflict in drivers/net/wireless/intel/iwlwifi/fw/file.h, just leave IWL_UCODE_TLV_FW_FSEQ_VERSION to the file. 'git diff' output should be just empty: diff --cc drivers/net/wireless/intel/iwlwifi/fw/file.h index cd622af90077,b0671e16e1ce..000000000000 --- a/drivers/net/wireless/intel/iwlwifi/fw/file.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/file.h ==================== Signed-off-by:
-
Wei Yongjun authored
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 03f66f06 ("net: ethernet: ti: davinci_mdio: use devm_ioremap()") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Colin Ian King authored
The call to nla_nest_start_noflag can return null in the unlikely event that nla_put returns -EMSGSIZE. Check for this condition to avoid a null pointer dereference on pointer nla_reply. Addresses-Coverity: ("Dereference null return value") Fixes: 11efd5cb ("openvswitch: Support conntrack zone limit") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
Yi-Hung Wei <yihung.wei@gmail.com> Signed-off-by:
-
David S. Miller authored
David Ahern says: ==================== ipv4: Move location of pcpu route cache and exceptions This series moves IPv4 pcpu cached routes from fib_nh to fib_nh_common to make the caches available for IPv6 nexthops (fib6_nh) with IPv4 routes. This allows a fib6_nh struct to be used with both IPv4 and and IPv6 routes. v4 - fixed memleak if encap_type is not set as noticed by Ido v3 - dropped ipv6 patches for now. Will resubmit those once the existing refcnt problem is fixed v2 - reverted patch 2 to use ifdef CONFIG_IP_ROUTE_CLASSID instead of IS_ENABLED(CONFIG_IP_ROUTE_CLASSID) to fix compile issues reported by kbuild test robot ==================== Signed-off-by: -
David Ahern authored
Similar to the cached routes, make IPv4 exceptions accessible when using an IPv6 nexthop struct with IPv4 routes. Simplify the exception functions by passing in fib_nh_common since that is all it needs, and then cleanup the call sites that have extraneous fib_nh conversions. As with the cached routes this is a change in location only, from fib_nh up to fib_nh_common; no functional change intended. Signed-off-by:
David Ahern <dsahern@gmail.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
David Ahern authored
Now that the cached routes are in fib_nh_common, pass it to rt_cache_route and simplify its callers. For rt_set_nexthop, the tclassid becomes the last user of fib_nh so move the container_of under the #ifdef CONFIG_IP_ROUTE_CLASSID. Signed-off-by:
-
David Ahern authored
While the cached routes, nh_pcpu_rth_output and nh_rth_input, are IPv4 specific, a later patch wants to make them accessible for IPv6 nexthops with IPv4 routes using a fib6_nh. Move the cached routes from fib_nh to fib_nh_common and update references. Initialization of the cached entries is moved to fib_nh_common_init, and free is moved to fib_nh_common_release. Change in location only, from fib_nh up to fib_nh_common; no functional change intended. Signed-off-by:
-
- 04 May, 2019 18 commits
-
-
Eelco Chaudron authored
For all other error cases in queue_userspace_packet() the error is returned, so it makes sense to do the same for these two error cases. Reported-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
Eelco Chaudron <echaudro@redhat.com> Acked-by:
Flavio Leitner <fbl@sysclose.org> Signed-off-by:
-
Heiner Kallweit authored
rtl_write_exgmac_batch is used in only one place, so we can remove it. Signed-off-by:
-
David S. Miller authored
Michal Kubecek says: ==================== netlink: strict attribute checking follow-up Three follow-up patches for recent strict netlink validation series. Patch 1 fixes dump handling for genetlink families which validate and parse messages themselves (e.g. because they need different policies for diferent commands). Patch 2 sets bad_attr in extack in one place where this was omitted. Patch 3 adds new NL_VALIDATE_NESTED flags for strict validation to enable checking that NLA_F_NESTED value in received messages matches expectations and includes this flag in NL_VALIDATE_STRICT. This would change userspace visible behavior but the previous switching to NL_VALIDATE_STRICT for new code is still only in net-next at the moment. v2: change error messages to mention NLA_F_NESTED explicitly ==================== Signed-off-by: -
Michal Kubecek authored
Add new validation flag NL_VALIDATE_NESTED which adds three consistency checks of NLA_F_NESTED_FLAG: - the flag is set on attributes with NLA_NESTED{,_ARRAY} policy - the flag is not set on attributes with other policies except NLA_UNSPEC - the flag is set on attribute passed to nla_parse_nested() Signed-off-by:Michal Kubecek <mkubecek@suse.cz> v2: change error messages to mention NLA_F_NESTED explicitly Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Reviewed-by:
-
Michal Kubecek authored
The check that attribute type is within 0...maxtype range in __nla_validate_parse() sets only error message but not bad_attr in extack. Set also bad_attr to tell userspace which attribute failed validation. Signed-off-by:
-
Michal Kubecek authored
Unlike do requests, dump genetlink requests now perform strict validation by default even if the genetlink family does not set policy and maxtype because it does validation and parsing on its own (e.g. because it wants to allow different message format for different commands). While the null policy will be ignored, maxtype (which would be zero) is still checked so that any attribute will fail validation. The solution is to only call __nla_validate() from genl_family_rcv_msg() if family->maxtype is set. Fixes: ef6243ac ("genetlink: optionally validate strictly/dumps") Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Firmware version update This patchset updates mlxsw to use a new firmware version and adds support for split into two ports on Spectrum-2 based systems. Patch #1 updates the firmware version to 13.2000.1122 Patch #2 queries new resources from the firmware. Patch #3 makes use of these resources in order to support split into two ports on Spectrum-2 based systems. The need for these resources is explained by Shalom: When splitting a port, different local ports need to be mapped on different systems. For example: SN3700 (local_ports_in_2x=2): * Without split: front panel 1 --> local port 1 front panel 2 --> local port 5 * Split to 2: front panel 1s0 --> local port 1 front panel 1s1 --> local port 3 front panel 2 --> local port 5 SN3800 (local_ports_in_2x=1): * Without split: front panel 1 --> local port 1 front panel 2 --> local port 3 * Split to 2: front panel 1s0 --> local port 1 front panel 1s1 --> local port 2 front panel 2 --> local port 3 The local_ports_in_{1x, 2x} resources provide the offsets from the base local ports according to which the new local ports can be calculated. ==================== Signed-off-by: -
Shalom Toledo authored
When splitting a port, different local ports need to be mapped on different systems. For example: SN3700 (local_ports_in_2x=2): * Without split: front panel 1 --> local port 1 front panel 2 --> local port 5 * Split to 2: front panel 1s0 --> local port 1 front panel 1s1 --> local port 3 front panel 2 --> local port 5 SN3800 (local_ports_in_2x=1): * Without split: front panel 1 --> local port 1 front panel 2 --> local port 3 * Split to 2: front panel 1s0 --> local port 1 front panel 1s1 --> local port 2 front panel 2 --> local port 3 The local_ports_in_{1x, 2x} resources provide the offsets from the base local ports according to which the new local ports can be calculated. Signed-off-by:Shalom Toledo <shalomt@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Shalom Toledo authored
Since the number of local ports in 4x changed between SPC and SPC-2, firmware expose new resources that the driver can query. Signed-off-by:
-
Ido Schimmel authored
The new version supports two features that are required by upcoming changes in the driver: * Querying of new resources allowing port split into two ports on Spectrum-2 systems * Querying of number of gearboxes on supported systems such as SN3800 Signed-off-by:
-
Tuong Lien authored
TIPC link can temporarily fall into "half-establish" that only one of the link endpoints is ESTABLISHED and starts to send traffic, PROTOCOL messages, whereas the other link endpoint is not up (e.g. immediately when the endpoint receives ACTIVATE_MSG, the network interface goes down...). This is a normal situation and will be settled because the link endpoint will be eventually brought down after the link tolerance time. However, the situation will become worse when the second link is established before the first link endpoint goes down, For example: 1. Both links <1A-2A>, <1B-2B> down 2. Link endpoint 2A up, but 1A still down (e.g. due to network disturbance, wrong session, etc.) 3. Link <1B-2B> up 4. Link endpoint 2A down (e.g. due to link tolerance timeout) 5. Node B starts failover onto link <1B-2B> ==> Node A does never start link failover. When the "half-failover" situation happens, two consequences have been observed: a) Peer link/node gets stuck in FAILINGOVER state; b) Traffic or user messages that peer node is trying to failover onto the second link can be partially or completely dropped by this node. The consequence a) was actually solved by commit c140eb16 ("tipc: fix failover problem"), but that commit didn't cover the b). It's due to the fact that the tunnel link endpoint has never been prepared for a failover, so the 'l->drop_point' (and the other data...) is not set correctly. When a TUNNEL_MSG from peer node arrives on the link, depending on the inner message's seqno and the current 'l->drop_point' value, the message can be dropped (- treated as a duplicate message) or processed. At this early stage, the traffic messages from peer are likely to be NAME_DISTRIBUTORs, this means some name table entries will be missed on the node forever! The commit resolves the issue by starting the FAILOVER process on this node as well. Another benefit from this solution is that we ensure the link will not be re-established until the failover ends. Acked-by:Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by:
-
Heiner Kallweit authored
I got an interesting report [0] that after resuming from hibernation the link has 100Mbps instead of 1Gbps. Reason is that another OS has been used whilst Linux was hibernated. And this OS speeds down the link due to WoL. Therefore, when resuming, we shouldn't expect that what the PHY advertises is what it did when hibernating. Easiest way to do this is removing state PHY_RESUMING. Instead always go via PHY_UP that configures PHY advertisement. [0] https://bugzilla.kernel.org/show_bug.cgi?id=202851Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Heiner Kallweit authored
When probing the phy device we set sym and asym pause in the "supported" bitmap (unless the PHY tells us otherwise). However we don't know yet whether the MAC supports pause. Simply copying phy->supported to phy->advertising will trigger advertising pause, and that's not what we want. Therefore add phy_advertise_supported() that copies all modes but doesn't touch the pause bits. In phy_support_(a)sym_pause we shouldn't set any bits in the supported bitmap because we may set a bit the PHY intentionally disabled. Effective pause support should be the AND-combined PHY and MAC pause capabilities. If the MAC supports everything, then it's only relevant what the PHY supports. If MAC supports sym pause only, then we have to clear the asym bit in phydev->supported. Copy the pause flags only and don't touch the modes, because a driver may have intentionally removed a mode from phydev->advertising. Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used. So, replace code of the following form: sizeof(*s) + s->nkeys*sizeof(struct tc_u32_key) with: struct_size(s, keys, s->nkeys) This code was detected with the help of Coccinelle. Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Cong Wang authored
Although devlink health report does a nice job on reporting TX timeout and other NIC errors, unfortunately it requires drivers to support it but currently only mlx5 has implemented it. Before other drivers could catch up, it is useful to have a generic tracepoint to monitor this kind of TX timeout. We have been suffering TX timeout with different drivers, we plan to start to monitor it with rasdaemon which just needs a new tracepoint. Sample output: ksoftirqd/1-16 [001] ..s2 144.043173: net_dev_xmit_timeout: dev=ens3 driver=e1000 queue=0 Cc: Eran Ben Elisha <eranbe@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2019-04-30 mlx5 misc updates: 1) Bodong Wang and Parav Pandit (6): - Remove unused mlx5_query_nic_vport_vlans - vport macros refactoring - Fix vport access in E-Switch - Use atomic rep state to serialize state change 2) Eli Britstein (2): - prio tag mode support, added ACLs and replace TC vlan pop with vlan 0 rewrite when prio tag mode is enabled. 3) Erez Alfasi (2): - ethtool: Add SFF-8436 and SFF-8636 max EEPROM length definitions - mlx5e: ethtool, Add support for EEPROM high pages query 4) Masahiro Yamada (1): - remove meaningless CFLAGS_tracepoint.o 5) Maxim Mikityanskiy (1): - Put the common XDP code into a function 6) Tariq Toukan (2): - Turn on HW tunnel offload in all TIRs 7) Vlad Buslov (1): - Return error when trying to insert existing flower filter ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2019-05-02 This series contains updates to the ice driver only. Anirudh introduces the framework to store queue specific information in the VSI queue contexts. This will allow future changes to update the structure to hold queue specific information. Akeem adds additional check so that if there is no queue to disable when attempting to disable a queue, return a configuration error without acquiring the lock. Fixed an issue with non-trusted VFs being able to add more than the permitted number of VLANs. Bruce removes unreachable code and updated the function to return void since it would never return anything but success. Brett provides most of the changes in the series, starting with reducing the scope of the error variable used and improved the debug message if we fail to configure the receive queue. Updates the driver to use a macro instead of using the same 'for' loop throughout the driver which helps with readability. Fixed an issue where users were led to believe they could set rx-usecs-high value, yet the changes to this value would not stick because it was not yet implemented to allow changes to this value, so implement the missing code to change the value. Found we had unnecessary wait when disabling queues, so remove it. I,proved a wasteful addition operation in our hot path by adding a member to the ice_q_vector structure and the necessary changes to use the member which stores the calculated vector hardware index. Refactored the link event flow to make it cleaner and more clear. Maciej updates the array index when stopping transmit rings, so that process every ring the VSI, not just the rings in a given transmit class. Paul adds support for setting 52 byte RSS hash keys. Md Fahad cleaned up a runtime change to the PFINT_OICR_ENA register, since the interrupt handlers will handle resetting the bit, if necessary. Tony adds a missing PHY type, which was causing warning message about an unrecognized PHY. ==================== Signed-off-by: -
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used. So, replace code of the following form: sizeof(*tx_msg) + le16_to_cpu(tx_msg->num_pls) * sizeof(tx_msg->pld[0]); with: struct_size(tx_msg, pld, le16_to_cpu(tx_msg->num_pls)); This code was detected with the help of Coccinelle. Signed-off-by:
-
