- 17 Feb, 2010 40 commits
-
-
Christof Schmitt authored
0 is a valid value for a LUN. It is slightly confusing to also see 0 in the trace entries relating to adapter and port. Change this to use 0xFFFFFFFFFFFFFFFF in the LUN field when the trace entry does not relate to a LUN or unit. Reviewed-by:
Swen Schillig <swen@vnet.ibm.com> Signed-off-by:
Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by:
James Bottomley <James.Bottomley@suse.de>
-
Christof Schmitt authored
The smatch tool from http://repo.or.cz/w/smatch.git warns about this: drivers/s390/scsi/zfcp_scsi.c +64 zfcp_scsi_command_fail(5) warn: variable dereferenced before check 'scpnt->device' drivers/s390/scsi/zfcp_scsi.c +64 zfcp_scsi_command_fail(5) warn: variable dereferenced before check 'scpnt->device->host' drivers/s390/scsi/zfcp_scsi.c +93 zfcp_scsi_queuecommand(23) warn: variable dereferenced before check 'unit' Fix the first two warnings by removing the checks for scpnt->device and -> host: As long as the SCSI command exists, there is also a scsi_device and a Scsi_Host. Fix the last warning by removing the BUG_ON checks in zfcp_scsi_queuecommand, they are leftovers from previous paranoia about wrong pointers between data structures. Reviewed-by:
-
Christof Schmitt authored
Remove the unused payload field from the struct zfcp_dbf_san_record, saving some space in the SAN trace. Reviewed-by:
-
Christof Schmitt authored
On a link down, the adapter reopen is not strictly necessary, but it helps flushing pending requests as quickly as possible. Add a comment mentioning this. qdio returning a problem on the response queue is an unlikely event. The recovery mentioned in the comment might resolve it, so implement it. This also has the advantage that it creates an entry in the recovery trace to see if and when this is occurring. Reviewed-by:
-
Christof Schmitt authored
Move the code for tracking FSF requests to new file to have this code in one place. The functions for adding and removing requests on the I/O path are already inline. The alloc and free functions are only called once, so it does not hurt to inline them and add them to the same file. Reviewed-by:
-
Christof Schmitt authored
Always use the FSF request id as a reference to the FSF request. With this change the function zfcp_reqlist_find_safe is no longer needed and can be removed. Reviewed-by:
-
Robert Love authored
Signed-off-by:
Robert Love <robert.w.love@intel.com> Signed-off-by:
-
Venkata Siva Vijayendra Bhamidipati authored
Update fnic driver version. Signed-off-by:
Venkata Siva Vijayendra Bhamidipati <vbhamidi@cisco.com> Signed-off-by:
-
Venkata Siva Vijayendra Bhamidipati authored
Incorrect initialization of lport stats in fnic_probe() causes fnic to crash at bootup and a node hang if fip is enabled and all links are brought up after fnic is loaded. Signed-off-by:
Joe Eykholt <jeykholt@cisco.com> Signed-off-by:
-
Venkata Siva Vijayendra Bhamidipati authored
To enable FIP support in fnic, we have to register with hardware to receive FIP solication frames on a well-known multicast address. Before FIP support, the firmware interface allowed multicast address registrations only for enic devices. This is a minor change in fnic to allow the firmware interface to now register mcast addresses for fnic too. Signed-off-by:
Brian Uchino <buchino@cisco.com> Signed-off-by:
Herman Lee <hermlee@cisco.com> Signed-off-by:
-
Robert Love authored
Currently we're gracefully tearing down each active connection when fcoe.ko is removed. We shouldn't allow the user to destroy connections by removing the module. We should force the user to destroy each connection and then the module can be removed. This patch makes it so a refrerence count on the module is taken each time a fcoe_interface is created. The reference count is dropped when the fcoe_interface is destroyed. This makes it so that module_exit() doesn't get called unless all fcoe_interfaces have been destroyed. This patch leaves the removal of interfaces in the module_exit routine so that if the user does a 'rmmod -f' we'll clean everything up before removing the module. The module_put line was put before the out_putdev goto line because we should only be decrementing the reference count if a fcoe_interface is actually destroyed. If we can't find the netdev or the fcoe_interface then it's assumed that something else has destroyed the fcoe_interface and it would have decremented the reference count at that time. Signed-off-by:
-
Bhanu Prakash Gollapudi authored
libfcoe module doesnt send port keep alive every FIP_VN_KA_PERIOD due to improper assignment of timeout value. Update the port_ka_time appropriately by incrementing it by FIP_VN_KA_PERIOD in fcoe_ctlr_timeout(), so that the link_work is scheduled to send the port LKA. Signed-off-by:
Bhanu Gollapudi <bprakash@broadcom.com> Acked-by:
-
Hugh Daschbach authored
Fix NULL pointer dereference crash occurs in fc_lport_bsg_request() for bsg requests that do not contain a response request. Specifically, FC_BSG_HST_ADD_RPORT and FC_BSG_HST_DEL_RPORT bsg requests are not guaranteed to include a response request. Signed-off-by:
Hugh Daschbach <hdasch@broadcom.com> Signed-off-by:
-
Hugh Daschbach authored
Both PLOGI and RTV response processing conditionally scale e_d_tov, but use different scaling factors. The scaling factor is correct in RTV response processing. Bring PLOGI e_d_tov scaling in line with RTV common service parameter inspection. Signed-off-by:
-
Vasu Dev authored
Adds check to call fc_fcp_ddp_setup for only FCP read cmds to avoid accessing junk fsp pointer at least in ESX since non FCP frame had junk fsp value, though fsp is implicitly initialized to null by __alloc_skb but with this patch no more relying on fsp initialized to null value and hitting junk fsp ptr access. Removes fsp pointer checking in fc_fcp_ddp_setup as this is not needed any more since its only caller for FCP read will always have a valid fsp. Reported by: Frank Zhang <frank_1.zhang@intel.com> Reported by: Rob Love <robert.w.love@intel.com> Signed-off-by:
Vasu Dev <vasu.dev@intel.com> Signed-off-by:
-
James Smart authored
Signed-off-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
James Smart authored
- Use the hbalock when changing the fc_flag. - Use the host_lock when changeing the sli_flag. - Prevent NULL pointer dereference after dma_alloc_coherent failure. Signed-off-by:
-
James Smart authored
- Convert all sysfs parameters to uint instead of int. - Add lpfc_supress_link_up parameter. - Change link_state to writable sysfs parameter. - Add support to be able to "up" or "down" link from link_state parameter. Signed-off-by:
-
James Smart authored
- Add support for the INTF (Interface) PCI register. - Add support for greater than 2 page SGLs. - Add support for up to 32 bit BDE lengths. - Implement the Port Capabilities Mailbox command. - Stop checking the Minor Code in the EQE structure. Signed-off-by:
-
James Smart authored
- Add init_vpi mailbox command before re-registering VPI. - Add Fast FCF failover support. Signed-off-by:
-
James Smart authored
- Call pci_save_state() after pci_restore_state() call to cope with kernel change. - Add support for PCI BAR region 0 if BAR0 is a 64 bit register. Signed-off-by:
-
Jayamohan Kallickal authored
This patch contains changes to support the BE3 chip Signed-off-by:
Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by:
-
Mike Christie authored
If the nvram is invalid qla4xxx tries to set Asuint32_t based on the card type. If the card type is not listed then Asuint32_t is going to be gargabe. This just fixes that if/elseif by adding a else to catch the case for new hardware that might not be listed yet. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Mike Christie authored
If the connection is bad, then the xmit thread could end up waiting a long time (up to sendtmeo seconds) in tcp_sendpage. This patch has us set the sk_error and wake up the xmit thread so we can quickly fail. Signed-off-by:
-
Mike Christie authored
No reason that we cannot set the change_queue_depth function for bnx2i. We just forgot to when the driver was created. Signed-off-by:
-
Mike Christie authored
This patch resets the cmd timer if cmds started before the timedout command are making progress. The idea is that the cmd probably timed out because we are trying to exeucte too many commands. If it turns out that the device the IO timedout on was bad or the cmd just got screwed up but other IO/devs were ok then we will will figure this out when the cmds ahead of the timed out one complete ok. This also fixes a bug where we were sort of detecting this by setting the last_timeout and last_xfer to the same value when the task was allocated. That caught the case where we never got to send any IO for it. However, if the problem had started right before we started the new task, then we were forced to wait an extra cmd timeout seconds to start the scsi eh. Signed-off-by:
-
Mike Christie authored
If the netdev has not been setup when the host is, we will oops when the iscsi layer calls into the driver and a it tries to reference the netdev in hba->ndev. This can happen if the iscsi driver is loaded before ifup is done. This patch just adds a check, so we can gracefully fail the operation. Signed-off-by:
-
Joe Perches authored
Remove uses of NIPQUAD, use %pI4 Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Michael Reed authored
After discussing this patch with LSI, I resubmitting with a recommended 40 second wait for the alternate ioc's initialization to complete. -- Fusion FC chips are two function with some shared resources. During initialization of one function its driver inhibits the ability of the other function's driver to allocate message frames by clearing its "active" flag. Should mid-layer error recovery be initiated for a scsi command during this initialization (which can take up to 40 seconds) error recovery will escalate to the level of host reset. This host reset might fail (as the other function is resetting) resulting in all connected targets being taken offline. This patch holds off mid-layer error recovery for up to 40 seconds to permit initialization of the other function to complete. Signed-off-by:
Michael Reed <mdr@sgi.com> Acked-by:
"Desai, Kashyap" <Kashyap.Desai@lsi.com> Signed-off-by:
-
Stephen M. Cameron authored
Signed-off-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by:
-
Stephen M. Cameron authored
Signed-off-by:
-
Stephen M. Cameron authored
The use of the big kernel lock here appears to be ancient cruft that is no longer needed. Signed-off-by:
-
Stephen M. Cameron authored
fix bug in adjust_hpsa_scsi_table which caused devices which have changed size, etc. to do the wrong thing. The problem was as follows: The driver maintains its current idea of what devices are present in the h->dev[] array. When it updates this array, it scans the hardware, and produces a new list of devices, call it sd[], for scsi devices. Then, it compares each item in h->dev[] vs. sd[], and any items which are not present sd it removes from h->dev[], and any items present in sd[], but different, it modifies in h->dev[]. Then, it looks for items in sd[] which are not present in h->dev[], and adds those items into h->dev[]. All the while, it keeps track of what items were added and removed to/from h->dev[]. Finally, it updates the SCSI mid-layer by removing and adding the same devices it removed and added to/from h->dev[]. (modified devices count as a remove then add.) originally, when a "changed" device was discovered, it was removed then added to h->dev[]. The item was added to the *end* of h->dev[]. And, the item was removed from sd[] as well (nulled out). As it processed h->dev[], these newly added items at the end of the list were encountered, and sd[] was searched, but those items were nulled out. So they ended up getting removed immediately after they were added. The solution is to have a way to replace items in the h->dev[] array instead of doing a remove + add. Then the "changed" items. are not encountered a second time, and removed. Signed-off-by:
-
Stephen M. Cameron authored
Signed-off-by:
-
Stephen M. Cameron authored
Signed-off-by:
-
Mike Miller authored
Signed-off-by:
Mike Miller <mikem@beardog.cce.hp.com> Signed-off-by:
-
Stephen M. Cameron authored
Signed-off-by:
-
Stephen M. Cameron authored
use scan_start and scan_finished entry points for scanning and route the CCISS_REGNEWD ioctl and sysfs triggering of same functionality through hpsa_scan_start. Signed-off-by:
-
Stephen M. Cameron authored
Signed-off-by:
-
Matt Gates authored
Signed-off-by:
Matt Gates <matthew.gates@hp.com> Signed-off-by:
-
